Search

Herein, a bio-based plasticizer ketalized tung oil butyl levulinate (KTBL) was developed using methyl eleostearate, a derivative of tung oil, and butyl levulinate. KTBL can be used as an auxiliary plasticizer to partially replace traditional plasticizer. The plasticizer has a ketone structure, an ester base, and a long linear chain. It was mixed with dioctyl phthalate (DOP), and the effect of the plasticizer KTBL as an auxiliary plasticizer on the plasticization of poly(vinyl chloride) (PVC) was studied. Their compatibility and plasticizing effect were evaluated using dynamic–mechanical thermal analysis (DMA), mechanical property analysis, and thermogravimetric analysis (TGA). The results demonstrate that when the KTBL to DOP ratio is 1:1, the blended sample with KTBL exhibits superior mechanical performance compared to pure DOP, resulting in an increased elongation at break from 377.47% to 410.92%. Moreover, with the increase in KTBL content, the durability is also significantly improved. These findings suggest that KTBL can serve as an effective auxiliary plasticizer for PVC, thereby reducing the reliance on DOP. [ABSTRACT FROM AUTHOR]

The strong covalent bonding of SiC makes it difficult to be fully sintered using conventional sintering techniques. Therefore, electrical current-assisted sintering techniques such as spark plasma sintering are needed to sinter SiC. The finite numerical simulations have been generally used to predict and guide sintering processes of ceramics (i.e.TiC,AlO 3). In this work, the numerical simulations of the temperature distribution, electrical field and thermal field on the porous SiC cylindrical samples by Comsol were investigated in details. The influence of porosity on the temperature distribution and electrical field distribution of the SiC samples were analyzed. Both the maximum current density (1.19 × 107A/m2) and the maximum temperature (2030 °C) of the SPS device occurred at the punch/spacer interface. The temperature values at the centre of the samples were proportional to the porosity, and the temperatures at the center of the samples increased from ∼1960 °C to ∼2010 °C at t = 2000s, with the porosity increasing from 1% to 60%. The uniformity of the temperature distribution deteriorated as the porosity increases, and the temperature gradients between the center and edge of the samples with the porosity of 1% and 60%, were ∼80 °C and ∼130 °C at t = 2000s, respectively. [ABSTRACT FROM AUTHOR]

Bio-based vitrimers present a promising solution to the issues associated with non-renewable and non-recyclable attributes of traditional thermosetting resins, showcasing extensive potential for diverse applications. However, their broader adoption has been hindered by the requirement for catalyst inclusion during the synthesis process. In this study, a cardanol-based curing agent with poly-hydroxy and tertiary amine structures was prepared by a clean synthetic method under the theory of click chemistry. The reaction of a cardanol-based curing agent with diglycidyl ether of bisphenol A formed catalyst-free, self-healing, and recyclable bio-based vitrimers. The poly-hydroxy and tertiary amine structures in the vitrimers promoted the curing of epoxy-carboxylic acid in the cross-linked network and served as internal catalysts of dynamic transesterification. In the absence of catalysts, the vitrimers network can achieve topological network rearrangement through dynamic transesterification, exhibiting excellent reprocessing performance. Moreover, the vitrimers exhibited faster stress relaxation (1500 s at 180 °C), lower activation energy (92.29 kJ·mol−1) and the tensile strength of the recycled material reached almost 100% of the original sample. This work offers a new method for preparing cardanol-based epoxy vitrimers that be used to make coatings, hydrogels, biomaterials, adhesives, and commodity plastics in the future. [ABSTRACT FROM AUTHOR]

The high integration density of microelectronic devices leads to local heat accumulation, and effective heat dissipation and signal transmission of packaging materials have become the primary issues to be solved. However, existing polymer materials have difficulty meeting the requirements due to their unsatisfactory thermal conductivity and thermal expansion properties. In this work, we proposed the use of digital light processing (DLP) printing technology to construct a triply periodic minimum surface (TPMS) skeleton, and a continuous and efficient heat conduction path was successfully constructed in epoxy resin by impregnating h-BN on the skeleton surface. When the loading of h-BN was 20 vol%, the thermal conductivity of the TPMS(SiO 2)@BN/EP(BN) composites was 1.86 W/(m·K), which was 786 % higher than that of pure epoxy resin. In addition, the thermal expansion coefficient of the composites decreased by more than 70 %. At the test frequencies of 3∼10 MHz, the composites showed stable dielectric properties, and the dielectric constant was always maintained in a low range, between 3.85 and 4.15. This work has realized the transformation of the method for constructing a heat conduction path from disordered to ordered and from random to repeatable. This provides a new strategy for the selection of microelectronic packaging materials. [ABSTRACT FROM AUTHOR]

Recently, there has been strong interest in inorganic solid-state electrolytes for all-solid-state batteries, among which the garnet electrolyte LLZO has attracted much attention due to its excellent properties, such as high ionic conductivity and broad electrochemical stability. The aim of our study was to improve the performance of Ta-doped LLZO (LLZTO) by co-doping Ga and Y at the Li and La sites using conventional solid-phase synthesis methods. We thoroughly investigated how Ga and Y affect the microstructure and electrochemical properties of LLZTO. The results show that the relative density of Ga- and Y-doped LLZTO increases significantly up to 94% under the same sintering conditions. This doping resulted in a significant increase in ionic conductivity from 2.0 × 10−4 S·cm−1 to 1.05 × 10−3 S·cm−1 and a decrease in electronic conductivity from 2.16 × 10−7 S·cm−1 to 9.18 × 10−8 S·cm−1. Subsequently, the symmetric cells were assembled and tested, and it was found that the interfaces of the doped solid-state electrolytes were much more stable and that the cycling time was longer. Thus, our study successfully coordinated the co-doping of Ga, Y, and Ta, providing valuable insights for the subsequent production of LLZO materials with higher densities and better performance. This study is a promising step toward the realization of safer all-solid-state batteries with higher energy densities. • Innovative further doping of two elements on top of LLZTO solid electrolyte, harmonizing the doping of three elements. • An order of magnitude increases in ionic conductivity of LLZTO solid state electrolytes after doping. • The doped LLZTO solid state electrolyte has better suitability with lithium metal anode. [ABSTRACT FROM AUTHOR]

A multicolour LED is a miniaturized, long-lasting, and easy-to-achieve colour adjustable emission light source. It is widely used in outdoor displays and room lighting fields. However, the increase in the cost and the decrease in luminous efficiency when adjusting lighting colours have constrained the development of multicolour LEDs. In this study, we initially designed a phosphor conversion pixel array through optical simulation and then prepared the phosphor conversion pixel arrays with different layouts using a semi-cured template method. Finally, we packaged the phosphor conversion pixel array with the blue LED array as a remote phosphor LED. The measurement of the luminous performance indicated that the colour gamut of multicolour LEDs was included in the simulated colour gamut, and the colour of the light was consistent with the design guidelines. Notably, the multicolour LED emission efficiency packaged with a phosphor conversion pixel array could reach 125 lm/W, and the hexagonal phosphor conversion pixel array had better emission performance than the square phosphor conversion pixel array. • Based on the Monte Carlo principle, multicolour LEDs composed of array phosphor-converted film and blue-LED chip are designed. • Phosphor-converted pixel arrays are prepared by semi-cured template method with high moulding quality. • By comparing the experimental and simulation results, colour-tuneable characteristics of the multicolour LEDs is verified. • The luminous efficiency of multicolour LEDs reach up to 125.0 lm/W and changing pixel can reduce the secondary reabsorption of fluorescence. [ABSTRACT FROM AUTHOR]