Search

A separator modification strategy was proposed by placing nitrogen-doped carbon fibers (NCF700) in the middle of the separator to prevent direct contact between the coating and the rigid zinc metal anode, resulting in coating cracks. The NCF700 coating can homogenize the electric field distribution and increase the transference number of zinc ions. Therefore, the battery assembled with the NCF700 coated separator exhibits superior cycling stability compared to the bare separator. [ABSTRACT FROM AUTHOR]

Rechargeable Zn‐based batteries provide a compelling supplement to subsistent energy storage devices owing to their high energy density, good safety, and low cost. Nevertheless, inherent imperfections such as dendrite growth, side reactions, and andante reaction kinetics, severely impede their commercialization. As new 0D nanomaterials, carbon dots (CDs) with unique characteristics and excellent electrochemical activity, exhibit promising potential exploitation in electrochemistry and electrocatalysis areas. Herein, the adhibition of CDs in resolving the aforementioned drawbacks of Zn‐based batteries is introduced. To begin with, concepts, physicochemical properties, and synthetic methods of CDs are discussed. Next, recent developments and advances exploiting CDs in respectively ameliorating the performance of the Zn anode, the cathode, and electrolytes of Zn ion batteries and bifunctional electrocatalytic activities including oxygen reduction reaction and oxygen evolution reaction for Zn‐air batteries, are roundly reviewed and minutely generalized. Finally, current challenges and prospects are surveyed as well, aiming to offer a reference for the blossom of advanced Zn‐based batteries. [ABSTRACT FROM AUTHOR]

Zinc‐ion batteries (ZIBs) have become a global research hotspot in recent years due to their eco‐friendliness, safety, abundant resources, and low cost. However, some significant challenges seriously affect their overall performance, thus hindering their further development and practical applications. Recently, multifunctional and adjustable 2D carbides and nitrides (MXenes) are extensively used for the modification of ZIBs, and fruitful achievements are achieved. In order to make a systematic understanding of these studies, it is highly desirable to provide an overview of MXenes based on their modification methods and action mechanisms. In this review, a basic introduction to ZIBs and MXenes is presented and the main modification approaches of MXenes in solving the issues of ZIBs are discussed in detail, including activation and composite strategies of the cathode, interface engineering, structural optimization, and zinc metal‐free anode strategy of the anode, solid‐state strategy of the electrolyte, and functionalized strategy of the separator. Importantly, the functions and related mechanisms of MXenes in various components of ZIBs are analyzed in depth. Finally, the pathways for MXenes in solving the issues of ZIBs are summarized, and their future directions are prospected. [ABSTRACT FROM AUTHOR]

The electric eel is known as the most powerful creature to generate electricity with a discharge voltage up to 860 V and peak current up to 1 A. These surprising properties are the results of billions of years of evolution on the electrical biological structure and bulk, and now have triggered great research interest in electric eel biomimetics for designing innovated configurations and components of energy storage and conversion devices. In this review, first, the bioelectrical behavior of electric eels is surveyed, followed by the physiological structure to reveal the discharge characteristics and principles of electric organs and electrocytes. Additionally, underlying electrochemical mechanisms and models for calculating the potential and current of electrocytes are presented. Central to this review is the recent progress of electric‐eel‐inspired innovations and applications for energy storage and conversion, particularly including novel power sources, triboelectric nanogenerators, and nanochannel ion‐selective membranes for salinity gradient energy harvesting. Finally, insights on the challenges at the moment and the perspectives on the future research prospects are critically compiled. It is suggested that energy‐related electric eel biomimetics will greatly boost the development of next‐generation high performance, green, and functional electronics. [ABSTRACT FROM AUTHOR]

Garnet solid state electrolytes (SSEs) have emerged as propitious candidates for solid‐state batteries (SSBs) with exceptional ionic conductivity and excellent (electro)chemical stability. However, the Li|garnet interface contact deterioration still remains a major challenge resulting in Li dendrite propagation. Herein, a method is proposed to strengthen the adhesion of garnet SSE and Li by incorporating Sr3N2 into the Li metal. Density functional theory (DFT) calculations reveal that the interfacial formation energy of Li|garnet is decreased by the obtained Li‐Sr‐N (LSN) composite, which can enable a shift from poor contact to intimate bonding at the Li|garnet interface and a homogenous Li+ flux as well as electric field distribution. Simultaneously, the produced Li3N and LiSrN, which are known for their strong Li adsorption affinity and rapid Li+ transfer kinetics, actively govern the Li plating process. Thereby this rational design brings a notable reduction in interfacial impedance (4.5 Ω cm2), along with the increased critical current density (1.3 mA cm−2) and enhanced cycle stability (1200 h at 0.3 mA cm−2). Furthermore, The LFP|garnet|LSN full cell has demonstrated remarkable cycling performance (95.9% capacity retention after 200 cycles at 1 C) and favorable rate capability (150.2 mAh g−1 at 0.1 C and 134.9 mAh g−1 at 1 C). The research provides a new sight into lithium modification that can restrain Li|garnet interface deterioration and lay the groundwork for future advancements in high‐performance garnet‐ based SSBs. [ABSTRACT FROM AUTHOR]

Transition metal sulfides (TMSs) still confront the challenges of capacity fading and inferior fast‐charging capability for sodium storage. The rational design of heterostructures enables a new approach to conquer these drawbacks. In this work, a hierarchical structure consisting of SnS2 nanosheets and FeS2 microrods with triphasic heterostructures is proposed by the facile secondary growth and sulfidation process. The introduction of tin sources regulates the proportion of pyrite and marcasite phases, thereby achieving the triphasic heterostructures comprising pyrite, marcasite FeS2, and SnS2. When served as anode material for sodium‐ion batteries, the optimized sample exhibits a high reversible capacity (901 mAh g−1) and durable cycling performances (827 mAh g−1 after 200 cycles at 1 A g−1 and 742 mAh g−1 after 700 cycles at 5 A g−1). Paring with the commercial Na3V2(PO3)3 cathodes, the full‐cell also delivers extraordinary cyclic stability with a high capacity of 618 mAh g−1 (based on the weight of anode material) after 200 cycles at 1 A g−1 (98.7% capacity retention). The hierarchical structure with adjustably triphasic heterogeneous interfaces alleviates the volumetric expansion and interfacial passivation of active material, while modulating the energy band structure and inducing the build‐in electric fields to boost Na+/electrons transport rate. [ABSTRACT FROM AUTHOR]

Niobium oxides have fascinated numerous interests for ultrafast sodium‐ion batteries due to their impressive stability, fast pseudocapacitive kinetics, and high safety features. However, the poor intrinsic electronic conductivity and unrevealed mechanisms largely limit their further applications. Here, inspired by density functional theory (DFT) calculations, the introduction of conductor heterostructure (Nb2O5/NbSe2) can largely decrease the bulk phase inserted energy of Na+ from 9.88 to −3.54 eV, as well as promote the delocalization of electron, greatly improving the electrical conductivity of Nb2O5. As expected, the as‐obtained orthorhombic niobium pentoxide (T‐Nb2O5‐x‐NbSe2@C) delivers a high conductivity of 3.69 S cm−1, exhibiting a great improvement of four orders magnitude than that of the parent Nb2O5 (1.87 × 10−4 S cm−1). Impressively, T‐Nb2O5‐x‐NbSe2@C possesses a high reversible capacity of 249 mAh g−1 at 0.1 A g−1, as well as excellent rate performance of 63 mAh g−1 at 5.0 A g−1, nearly twins the capacity of parent porous Nb2O5. Furthermore, the periodic evolutions of the main peaks for targeted electrodes during repeated charging/discharging processes have been further revealed by in situ XRD, demonstrating a highly reversible inserted/extracted storage mechanism of Na+. This work provides a novel method to improve the conductivity of materials by constructing conductor heterojunction. [ABSTRACT FROM AUTHOR]

The utilization rate of active sites in cathode materials for Zn‐based batteries is a key factor determining the reversible capacities. However, a long‐neglected issue of the strong electrostatic repulsions among divalent Zn2+ in hosts inevitably causes the squander of some active sites (i.e. gap sites). Herein, we address this conundrum by unraveling the "gap‐filling" mechanism of multiple charge carriers in aqueous Zn‐MoS2 batteries. The tailored MoS2/(reduced graphene quantum dots) hybrid features an ultra‐large interlayer spacing (2.34 nm), superior electrical conductivity/hydrophilicity, and robust layered structure, demonstrating highly reversible NH4+/Zn2+/H+ co‐insertion/extraction chemistry in the 1 M ZnSO4+0.5 M (NH4)2SO4 aqueous electrolyte. The NH4+ and H+ ions can act as gap fillers to fully utilize the active sites and screen electrostatic interactions to accelerate the Zn2+ diffusion. Thus, unprecedentedly high rate capability (439.5 and 104.3 mAh g−1 at 0.1 and 30 A g−1, respectively) and ultra‐long cycling life (8000 cycles) are achieved. [ABSTRACT FROM AUTHOR]

Aqueous zinc‐ion batteries (ZIBs) are promising candidates for grid‐energy storage due to their safety and cost‐effectiveness. However, the detrimental hydrogen evolution reaction (HER) and dendrite growth on Zn‐metal anodes severely limit their applications. Herein, trace hydrophobic hyamine (HQA, 0.78 mmol L−1) is introduced as an electrolyte additive to improve the electrochemical performance of the Zn anode. Experiments and theoretical calculations revealed that cationic HQA can preferentially adsorb onto the anode surface to inhibit the HER and promote the uniform distribution of Zn ions by forming a water‐lean electric double layer (EDL). Moreover, the oriented adsorption of HQA induced exposure of the Zn (002) plane and prevented dendrite growth. Therefore, the symmetric cells using the HQA‐containing electrolyte exhibited stable cycle performance for more than 1600 h. Even at a high‐density current of 5 mA cm−2, it has a high cumulative capacity of 3250 mAh cm−2. It exhibited an excellent deep‐discharge performance (80%) with a stable cycle for 175 h. The Zn||NH4V4O10 full cell exhibited a high specific capacity and cycle stability at 4.0 A g−1 due to the excellent reversibility of Zn anode. These results provide a new and low‐cost approach for electrolyte design and EDL optimization of high‐performance zinc‐ion batteries. [ABSTRACT FROM AUTHOR]

Antimony（Sb） has high theoretical specific capacity and moderate reaction potential, but poor cycling stability and rate performance caused by large volume expansion and sluggish reaction kinetics limit its development in alkali‐ion batteries. The construction of carbon/Sb composites can solve this problem, but the traditional single carbon composite and poor Sb/carbon interface have limited promotion. Here, under the guidance of theoretical calculations, a strategy of hierarchical double carbon composite is proposed to enhance the performance of Sb anode, and systematically reveal the lithium/sodium ions (Li+/Na+) storage mechanism of Sb in complex composite system. Sb nanoparticles (Sb NPs) are encapsulated in carbon sphere matrix with strong interfacial chemical bond to form the first level composite material, and then the highly conductive and mechanically strong graphene is used as a three‐dimensional skeleton network to connect the first level composite to form the second level composite material. The hierarchical double carbon/Sb composite exhibits excellent rate (228 mAh g−1 @ 20 A g−1) and long cycling performance (373.7 mAh g−1 @ 2 A g−1 after 2200 cycles, capacity retention of 93.1%). This work may expand structural design and interface regulation of Sb/C composites and providing theoretical guidance for metal anodes development. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: Rationally developing efficient and durable bifunctional catalysts toward oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is critical for rechargeable zinc‐air batteries (ZABs). Herein, a bead‐like CoSe2@NC@NCNFs bifunctional catalyst was designed and fabricated by confining cubic CoSe2 nanoparticles to three‐dimensional (3D) porous MOFs‐derived nitrogen‐doped carbon (NC) and one‐dimensional (1D) N‐doped carbon nanofibers (NCNFs) through a facile encapsulate strategy. The 1D/3D continuous network structure contributes to the improvement of specific surface area and electronic conductivity, while the strong synergistic effect between CoSe2 sites and Co‐Nx‐C sites can effectively enhance electron/mass transfer and reduce the diffusion resistance. The as‐constructed CoSe2@NC@NCNFs catalyst exhibits high catalytic activity and stability toward ORR/OER with a high half‐wave potential of 0.80 V (vs. RHE) in ORR and a low overpotential of 280 mV at 10 mA·cm−2 in OER. More encouragingly, the rechargeable ZABs with CoSe2@NC@NCNFs cathode deliver high peak power densities (126.8 mW·cm−2), large specific capacities (763.1 mA·h·g−1), and robust charge‐discharge cycling stability over 240 cycles. This study provides a facile strategy for designing efficient bifunctional catalysts for rechargeable energy conversion applications. [ABSTRACT FROM AUTHOR]

Hard carbon (HC) is widely regarded as the most promising anode material for sodium‐ion batteries (SIBs). For improving the sodium storage capacity of HC anode, current research primarily focuses on the high‐voltage slope region. Actually, increasing the storage capability in the low‐voltage plateau region is more important for enhancing the energy density of full cells. Therefore, in this study, HC anode with rich closed pore structure is designed and constructed with the help of carbon dots (CDs), and it is demonstrated that the presence of closed pore structure can provide more sodium storage sites in the plateau region, resulting in an obvious increase of sodium storage capacity. Moreover, the pore‐filling and intercalation mechanism for sodium storage in plateau region is revealed by in situ Raman spectroscopy and ex situ transmission electron microscopy (TEM). It is worth noting that the increase in capacity induced by closed pore‐filling is not accompanied by a decrease in initial coulombic efficiency (ICE), due to the fact that the introduction of closed pores does not increase the contact area between electrode and electrolyte. This work presents novel concepts for the structural design of HC and provides valuable insights into the effective utilization of plateau region in SIBs. [ABSTRACT FROM AUTHOR]

Sodium‐ion batteries (SIBs) have rapidly risen to the forefront of energy storage systems as a promising supplementary for Lithium‐ion batteries (LIBs). Na3V2(PO4)2F3 (NVPF) as a common cathode of SIBs, features the merits of high operating voltage, small volume change and favorable specific energy density. However, it suffers from poor cycling stability and rate performance induced by its low intrinsic conductivity. Herein, we propose an ingenious strategy targeting superior SIBs through cross‐linked NVPF with multi‐dimensional nanocarbon frameworks composed of amorphous carbon and carbon nanotubes (NVPF@C@CNTs). This rational design ensures favorable particle size for shortened sodium ion transmission pathway as well as improved electronic transfer network, thus leading to enhanced charge transfer kinetics and superior cycling stability. Benefited from this unique structure, significantly improved electrochemical properties are obtained, including high specific capacity (126.9 mAh g−1 at 1 C, 1 C = 128 mA g−1) and remarkably improved long‐term cycling stability with 93.9% capacity retention after 1000 cycles at 20 C. The energy density of 286.8 Wh kg−1 can be reached for full cells with hard carbon as anode (NVPF@C@CNTs//HC). Additionally, the electrochemical performance of the full cell at high temperature is also investigated (95.3 mAh g−1 after 100 cycles at 1 C at 50 °C). Such nanoscale dual‐carbon networks engineering and thorough discussion of ion diffusion kinetics might make contributions to accelerating the process of phosphate cathodes in SIBs for large‐scale energy storages. [ABSTRACT FROM AUTHOR]