Search

Carbon fiber-reinforced plastics (CFRP) are leading functional materials with superior strength and low mass density compared to metal. Our previous factory site analyses found that CFRP processing generates fibrous debris and fine micro/nano-sized particles of various shapes. The present interventional study was conducted at a factory located in Japan and evaluated debris consisting of various-sized particles generated during the industrial processing of CFRP, such as cutting, grinding, and turning of CFRP pipes, using real-time particle monitoring devices of the following: PM4 Digital Dust Monitor (DDM), handled Optical Particle Counter (OPC), Condensation Particle Counter (CPC), and Scanning Mobility Particle Sizer (SMPS). In addition, personal exposure of workers was evaluated using a novel wearable PM2.5-compatible device (P-sensor). First, we confirmed the presence of micro/nano particles in the dust generated during industrial processing of CFRP. Finer CFRP-generated particles were detected by the nanoparticle-compatible devices; CPC and SMPS, but not by OPC or DDM. The dynamic detection pattern of the P-sensor resembled that recorded by the nanoparticle-compatible devices. The novel wearable P-sensor can be used to measure finer particles generated by CFRP processing in occupational settings. Second, the exposure assessment was conducted twice and the levels of the micro/nano particles in the second survey were significantly (less than half) lower than that in the first survey. By avoiding immediate power-off of the exhaust system after operations, the scattering of particles was effectively reduced. Our results indicate that effective use of local exhaust ventilation system improves the workplace environment for particle exposure., (© The Author(s) 2024. Published by Oxford University Press on behalf of the British Occupational Hygiene Society. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)