Search

Abstract Lead (Pb) halide perovskite solar cells (PSCs) exhibit impressive power conversion efficiencies close to those of their silicon counterparts. However, they suffer from moisture instability and Pb safety concerns. Previous studies have endeavoured to address these issues independently, yielding minimal advancements. Here, a general nanoencapsulation platform using natural polyphenols is reported for Pb‐halide PSCs that simultaneously addresses both challenges. The polyphenol‐based encapsulant is solution‐processable, inexpensive (≈1.6 USD m−2), and requires only 5 min for the entire process, highlighting its potential scalability. The encapsulated devices with a power conversion efficiency of 20.7% retained up to 80% of their peak performance for 2000 h and up to 70% for 7000 h. Under simulated rainfall conditions, the encapsulant rich in catechol groups captures the Pb ions released from the degraded perovskites via coordination, keeping the Pb levels within the safe drinking water threshold of 15 ppb.

Abstract Crystallization of alloys from a molten state is a fundamental process underpinning metallurgy. Here the direct imaging of an intermetallic precipitation reaction at equilibrium in a liquid‐metal environment is demonstrated. It is shown that the outer layers of a solidified intermetallic are surprisingly unstable to the depths of several nanometers, fluctuating between a crystalline and a liquid state. This effect, referred to herein as crystal interface liquefaction, is observed at remarkably low temperatures and results in highly unstable crystal interfaces at temperatures exceeding 200 K below the bulk melting point of the solid. In general, any liquefaction process would occur at or close to the formal melting point of a solid, thus differentiating the observed liquefaction phenomenon from other processes such as surface pre‐melting or conventional bulk melting. Crystal interface liquefaction is observed in a variety of binary alloy systems and as such, the findings may impact the understanding of crystallization and solidification processes in metallic systems and alloys more generally.

This research designed and developed an ultrasonic reactor for a fast and on demand production of cold brew coffee, remarkably reducing the brewing time from 24 h to less than 3 min. The technology was engineered by utilizing resonance to induce ultrasonic waves around the walls of the brewing basket of an espresso machine. The sound transmission system comprised a transducer, a horn and a brewing basket. This arrangement transformed the coffee basket into an effective sonoreactor that injected sound waves at multiple points through its walls, thereby generating multiple regions for acoustic cavitation within the reactor. Furthermore, acoustic streaming induced greater mixing and enhanced mass transfer during brewing. The design was accomplished by modeling the transmission of sound, and acoustic cavitation. Brew characterization and chemical composition analysis was performed, considering factors such as pH, acidity, color, and the composition of caffeine, fatty acids, and volatiles. The efficiency of the extraction increased by decreasing the basket loading percentage (BLP). For instance, sonicating at 100 W doubled the extraction yield and caffeine concentration, from 15.05 % to 33.44 % at BLP = 33 %, and from 0.91 mg/mL to 1.84 mg/mL at BLP = 67 %, respectively. The total fatty acids increased from 1.16 mg/mL to 9.20 mg/mL, representing an eightfold increase, at BLP = 33 %. Finally, a sensory analysis was conducted to evaluate appearance, aroma, texture, flavor, and aftertaste, which demonstrated that coffee brewed for 1 and 3 min in the sonoreactor exhibited almost undistinguishable properties compared to a standard 24 h brewing without ultrasound.

Active droplets play important roles in microfluidics, robotics, and micro-electromechanical systems. As a special class of active droplets that are conductive, reactive, and of high surface tension, liquid metal droplets (LMDs) can be driven by electric-field-induced surface (Marangoni) flows to function as reconfigurable components in actuators, sensors, catalytic reactors, and antennas. Stimulating LMDs using an electric field induces concurrent electro-hydrodynamic flows and electrochemical surface oxidation (passivation). It is however difficult to decouple these two effects which brings complexity in controlling LMD motions. To address this challenge, pulse time modulation (PTM) signals are used. PTM enables controlled LMD displacement by propelling the droplets forward during the voltage-on phases and facilitating surface recovery from oxidation during the voltage-off phases. Counterintuitively, by taking such intermittent "rests", the LMDs effectively inhibit the unfavorable impact of oxidation, granting high motion controllability. Combining high-speed imaging, motion tracking, machine learning, and electrochemical analysis, the study reveals how electro-hydrodynamic flows and surface oxide formation/dissolution interplay to generate well-defined motion regimes. The study further develops a quasi-analytical model to describe droplet motions and designs a rotary LMD motor to showcase the versatility of the approach. This work provides the fundamental framework and viable strategy for designing innovative liquid metal-based systems. [ABSTRACT FROM AUTHOR]

Abstract Electrocrystallization is a promising method for controlled charge‐transfer complex (CTC) deposition on microfabricated electrodes for gas sensing applications. However, there remains a gap in our understanding of CTC electrodeposition. In this study, we focus on investigating the electrocrystallization of cobalt tetracyanoquinodimethane (Co‐TCNQ) on a microdisk electrode to elucidate and control the process. Leveraging the microelectrode technique, we conduct steady‐state measurements to observe nucleation and crystal growth dynamics, particularly in the early stages of electrocrystallization. We use cyclic voltammetry and chronoamperometry to examine Co‐TCNQ electrocrystallization under various electrolytic conditions. We identify electrocrystallization kinetics, ranging from electrokinetic to diffusion‐limited growth, governing the nucleation and growth of Co‐TCNQ crystals. Notably, we pinpoint the applied overpotential and precursor concentration range necessary for a single nucleation site on the microelectrode. Moreover, we demonstrate control over crystal orientation and morphology. Our findings reveal a nonclassical growth pathway for Co‐TCNQ crystals characterized by oriented attachment of small crystallites along the conductive long axis. Importantly, electrodeposited Co‐TCNQ on patterned microelectrodes exhibits selective sensing capabilities for nitrogen dioxide gas. Overall, this study sheds light on CTC electrodeposition through a proof‐of‐concept demonstration involving Co‐TCNQ electrodeposition on microelectrodes, presenting potential applications across diverse materials.