Search

Isocitrate Dehydrogenase-1 (IDH1) is commonly mutated in lower-grade diffuse gliomas. The IDH1R132H mutation is an important diagnostic tool for tumor diagnosis and prognosis; however, its role in glioma development, and its impact on response to therapy, is not fully understood. We developed a murine model of proneural IDH1R132H-mutated glioma that shows elevated production of 2-hydroxyglutarate (2-HG) and increased trimethylation of lysine residue K27 on histone H3 (H3K27me3) compared to IDH1 wild-type tumors. We found that using Tazemetostat to inhibit the methyltransferase for H3K27, Enhancer of Zeste 2 (EZH2), reduced H3K27me3 levels and increased acetylation on H3K27. We also found that, although the histone deacetylase inhibitor (HDACi) Panobinostat was less cytotoxic in IDH1R132H-mutated cells (either isolated from murine glioma or oligodendrocyte progenitor cells infected in vitro with a retrovirus expressing IDH1R132H) compared to IDH1-wild-type cells, combination treatment with Tazemetostat is synergistic in both mutant and wild-type models. These findings indicate a novel therapeutic strategy for IDH1-mutated gliomas that targets the specific epigenetic alteration in these tumors.

To optimize the processing technology of Gastrodia elata by water in which millet had been cooked and investigate the effects of LPS-induced microglia (BV2) inflammatory responses. Determination of gastrodin, p-hydroxybenzyl alcohol, parishin A, parishin B, parishin C, parishin E in the extract of Gastrodia elata by high-performance liquid chromatography (HPLC), and the content of six components were used as evaluation index, the volume ratio of water in which millet had been cooked to water, cooking time and drying temperature were selected as single factor variables. The designation of orthogonal test was based on single factor on three indicators, then optimization of the preparation technology. Comparison of the content of six components in different processed product. The neuroinflammatory cell model was induced by LPS and the cell viability was evaluated after treatment with the extract of processed products by a Cell Counting kit 8 (CCK-8) assay. The levels of TNF-α, IL-6, IL-1β in the cell culture medium were measured with ELISA kits. The protein expressions of TLR4, MYD88, P65, INOS, COX-2, IL-1β in LPS-induced BV2 cells were detected by Western blot. The results showed that the cooking time and the volume ratio of water in which millet had been cooked to water had a significant effect on the test results. The water in which millet had been cooked of Gastrodia elata processing technology: The ratio of the volume water in which millet had been cooked to water was 1:3, the boiling time was 25 min and the temperature of drying was 75 ℃. The comprehensive score of the six components in processing with water in which millet had been cooked products was higher than that of steamed products. The extract of Gastrodia elata had exhibited varying degrees of protective activity on LPS-induced BV2 cells. The results showed that the secretion of TNF-α, IL-6, IL-1β was significantly increased in BV2 microglial cells induced by LPS compared with the normal control group (P

Abstract Fractional flow reserve (FFR) has become the gold standard for evaluating coronary lesion-specific ischemia. However, FFR is an invasive method that may cause possible complications in the coronary artery and requires expensive equipment, which limits its use. Promising noninvasive diagnostic methods, such as computed tomography angiography–derived FFR (CT-FFR) and the quantitative flow ratio (QFR), have been proposed. In this study, we evaluated the diagnostic performance of the QFR and CT-FFR in predicting coronary lesion-specific ischemia, with the FFR serving as the reference standard. Patients with suspected or known coronary artery disease who underwent coronary CT angiography revealing 30–90% diameter stenosis in the main coronary artery (≥ 2.0 mm reference diameter) were enrolled. The FFR was measured during invasive coronary angiography (within 15 days after coronary CT angiography). An FFR ≤ 0.8 was the reference standard for coronary lesion-specific ischemia. A total of 103 vessels from 92 consecutive patients (aged 59.8 ± 9.2 years; 60.9% were men) were evaluated. The diagnostic performance of a QFR ≤ 0.80 for predicting coronary lesion-specific ischemia demonstrated good diagnostic accuracy, sensitivity, and specificity (92.2%, 87.2%, and 96.4%, respectively), with an area under the receiver operating characteristic curve (AUC) of 0.987 (P

Abstract Although robotic radical resection for hilar cholangiocarcinoma (HCCA) has been reported in some large hepatobiliary centers, biliary-enteric reconstruction (BER) remains a critical step that hampers the operation’s success. This study aimed to evaluate the feasibility and quality of BER in robotic radical resection of HCCA and propose technical recommendations. A retrospective study was conducted on patients with HCCA who underwent minimally invasive radical resection at Zhejiang Provincial People’s Hospital between January 2016 and July 2023. A 1:2 propensity score matching (PSM), widely used to reduce selection bias, was performed to evaluate the outcomes, especially BER-related data, between the robotic and laparoscopic surgery. Forty-six patients with HCCA were enrolled; ten underwent robotic-assisted resection, while the others underwent laparoscopic surgery. After PSM at a ratio of 1:2, 10 and 20 patients were assigned to the robot-assisted and laparoscopic groups, respectively. The baseline characteristics of both groups were generally well-balanced. The average liver resection time was longer in the robotic group than in the laparoscopic group (139.5 ± 38.8 vs 108.1 ± 35.8 min, P = 0.036). However, the former had less intraoperative blood loss [200 (50–500) vs 310 (100–850) ml], despite no statistical difference (P = 0.109). The number of residual bile ducts was 2.6 ± 1.3 and 2.7 ± 1.2 (P = 0.795), and anastomoses were both 1.6 ± 0.7 in the two groups (P = 0.965). The time of BER was 38.4 ± 13.6 and 59.1 ± 25.5 min (P = 0.024), accounting for 9.9 ± 2.8% and 15.4 ± 4.8% of the total operation time (P = 0.001). Although postoperative bile leakage incidence in laparoscopic group (40%) was higher than that in robotic group (10%), there was no significant difference between the two groups (P = 0.204); 6.7 ± 4.4 and 12.1 ± 11.7 days were observed for tube drawing (P = 0.019); anastomosis stenosis and calculus rate was 10% and 30% (P = 0.372), 0% and 15% (P = 0.532), respectively. Neither group had hemorrhage- or bile leakage-related deaths. Robotic radical resection for HCCA may offer perioperative outcomes comparable to conventional laparoscopic procedures and tends to be advantageous in terms of anastomosis time and quality. We are optimistic about its wide application in the future with the improvement of surgical techniques and experience.

Abstract Background The Naples Prognostic Score (NPS), integrating inflammatory and nutritional biomarkers, has been reported to be associated with the prognosis of various malignancies, but there is no report on intrahepatic cholangiocarcinoma (ICC). This study aimed to explore the prognostic value of NPS in patients with ICC. Methods Patients with ICC after hepatectomy were collected, and divided into three groups. The prognosis factors were determined by Cox regression analysis. Predictive efficacy was evaluated by the time-dependent receiver operating characteristic (ROC) curves. Results A total of 174 patients were included (Group 1: 33 (19.0%) patients; Group 2: 83 (47.7%) patients; and Group 3: 58 (33.3%) patients). The baseline characteristics showed the higher the NPS, the higher the proportion of patients with cirrhosis and Child-Pugh B, and more advanced tumors. The Kaplan-Meier curves reflect higher NPS were associated with poor survival. Multivariable analysis showed NPS was an independent risk factor of overall survival (NPS group 2 vs. 1: HR = 1.671, 95% CI: 1.022–3.027, p = 0.009; NPS group 3 vs. 1: HR = 2.208, 95% CI: 1.259–4.780, p = 0.007) and recurrence-free survival (NPS group 2 vs. 1: HR = 1.506, 95% CI: 1.184–3.498, p = 0.010; NPS group 3 vs. 1: HR = 2.141, 95% CI: 2.519–4.087, P = 0.001). The time ROC indicated NPS was superior to other models in predicting prognosis. Conclusions NPS is a simple and effective tool for predicting the long-term survival of patients with ICC after hepatectomy. Patients with high NPS require close follow-up, and improving NPS may prolong the survival time.

Abstract Background & aims Complications after laparoscopic liver resection (LLR) are important factors affecting the prognosis of patients, especially for complex hepatobiliary diseases. The present study aimed to evaluate the value of a three-dimensional (3D) printed dry-laboratory model in the precise planning of LLR for complex hepatobiliary diseases. Methods Patients with complex hepatobiliary diseases who underwent LLR were preoperatively enrolled, and divided into two groups according to whether using a 3D-printed dry-laboratory model (3D vs. control group). Clinical variables were assessed and complications were graded by the Clavien-Dindo classification. The Comprehensive Complication Index (CCI) scores were calculated and compared for each patient. Multivariable analysis was performed to determine the risk factors of postoperative complications. Results Sixty-two patients with complex hepatobiliary diseases underwent the precise planning of LLR. Among them, thirty-one patients acquired the guidance of a 3D-printed dry-laboratory model, and others were only guided by traditional enhanced CT or MRI. The results showed no significant differences between the two groups in baseline characters. However, compared to the control group, the 3D group had a lower incidence of intraoperative blood loss, as well as postoperative 30-day and major complications, especially bile leakage (all P

Objective: The cause of syncope is generally determined based on clinical manifestations. There has been little discussion about the value of electrocardiograms for diagnosing neurally mediated syncope. The aim of this study was to test the predictive value of the isolated very low QRS voltage in tilt-table testing for suspected neurally mediated syncope in a Chinese population. Methods: This retrospective study enrolled patients with suspected neurally mediated syncope. Tilt-table testing was a part of the diagnostic examination. Each patient underwent echocardiography and electrocardiogram. isolated very low QRS voltage referred to a voltage of ⩽0.3 mV for the QRS complex in an isolated frontal lead or ⩽0.7 mV for the QRS complex in an isolated precordial lead. Results: In total, 157 patients were included in the tilt-table testing positive group, and 242 patients were included in the tilt-table testing negative group. Compared with the testing negative group, the testing positive group had more patients with isolated very low QRS voltage in the frontal leads ( p

Ionic conductive hydrogel has recently garnered significant research attention due to its potential applications in the field of wearable and flexible electronics. Nonetheless, the integration of multifunctional and synergistic advantages, including reliable electronic properties, high swelling capacity, exceptional mechanical characteristics, and self-adhesive properties, presents an ongoing challenge. In this study, we have developed an ionic conductive hydrogel through the co-polymerization of 4-Acryloylmorpholine (ACMO) and sodium acrylate using UV curing technology. The hydrogel exhibits excellent mechanical properties, high conductivity, superior swelling capacity, and remarkable self-adhesive attributes. The hydrogel serves as a highly sensitive strain sensor, enabling precise monitoring of both substantial and subtle human motions. Furthermore, the hydrogel demonstrates the capability to adhere to human skin, functioning as a human-machine interface for the detection of physiological signals, including electromyogram (EMG) signals, with low interfacial impedance. This work is anticipated to yield a new class of stretchable and conductive materials with diverse potential applications, ranging from flexible sensors and wearable bio-electronics to contributions in the field of artificial intelligence.

Abstract Background Post-hepatectomy liver failure (PHLF) is a serious complication after hepatectomy and a major cause of death. The current criteria for PHLF diagnosis (ISGLS consensus) require laboratory data of elevated INR level and hyperbilirubinemia on or after postoperative day 5. This study aims to propose a new indicator for the early clinical prediction of PHLF. Methods The peri-operative arterial lactate concentration level ratios were derived from time points within the 3 days before surgery and within POD1, the patients were divided into two groups: high lactate ratio group (≥ 1) and low lactate ratio group (

Abstract Background This study used a bidirectional 2-sample Mendelian randomization study to investigate the potential causal links between mtDNA copy number and cardiometabolic disease (obesity, hypertension, hyperlipidaemia, type 2 diabetes [T2DM], coronary artery disease [CAD], stroke, ischemic stroke, and heart failure). Methods Genetic associations with mtDNA copy number were obtained from a genome-wide association study (GWAS) summary statistics from the UK biobank (n = 395,718) and cardio-metabolic disease were from largest available GWAS summary statistics. Inverse variance weighting (IVW) was conducted, with weighted median, MR-Egger, and MR-PRESSO as sensitivity analyses. We repeated this in the opposite direction using instruments for cardio-metabolic disease. Results Genetically predicted mtDNA copy number was not associated with risk of obesity (P = 0.148), hypertension (P = 0.515), dyslipidemia (P = 0.684), T2DM (P = 0.631), CAD (P = 0.199), stroke (P = 0.314), ischemic stroke (P = 0.633), and heart failure (P = 0.708). Regarding the reverse directions, we only found that genetically predicted dyslipidemia was associated with decreased levels of mtDNA copy number in the IVW analysis (β= − 0.060, 95% CI − 0.044 to − 0.076; P = 2.416e−14) and there was suggestive of evidence for a potential causal association between CAD and mtDNA copy number (β= − 0.021, 95% CI − 0.003 to − 0.039; P = 0.025). Sensitivity and replication analyses showed the stable findings. Conclusions Findings of this Mendelian randomization study did not support a causal effect of mtDNA copy number in the development of cardiometabolic disease, but found dyslipidemia and CAD can lead to reduced mtDNA copy number. These findings have implications for mtDNA copy number as a biomarker of dyslipidemia and CAD in clinical practice.

Alport Syndrome (AS) is a genetic kidney disorder characterized by progressive hearing loss and atypical eye symptoms, resulting in a poor prognosis and lack of effective targeted therapy. The primary mode of inheritance is X-linked dominant (XLAS) due to variants in the COL4A5 gene. This study revealed a previously unidentified alternative form of the COL4A5 gene, namely, the c.4822–10T>C variant, which was confirmed through in vitro experiments. To investigate the impact of a splicing variant on COL4A5 mRNA production, an in vitro minigene splicing assay was utilized. Additionally, molecular dynamics was employed to predict the ability of α5(IV) to form a triple helix. Results from the experiment revealed that the wild-type (WT) plasmid produced two distinct mRNA products simultaneously. Sequence analysis using the BLAST database revealed a 173-bp deletion in the mRNA sequence of the first product, indicating a potential similarity to the XM_016942897.2 transcript of Pan troglodytes. The second mRNA product of the WT plasmid contained the full sequence of exons 51, 52, and 53, as anticipated. Conversely, the mutant (MT) plasmid generated a single mRNA product with a 173-bp deletion in exon 52, leading to the identification of the mature mRNA expression as NM_033380.2: COL4A5: c.4822_4994del. In the context of nonsense-mediated mRNA decay (NMD), the deletion c.4822_4994 results in the production of a truncated protein, p.His1608*, that terminates prematurely. This truncated protein may disrupt the secondary structure of α5(IV) and potentially cause an abnormal conformation of α345(IV). This study examines the relationship between the variable splicing pattern in the NM_033380.2 transcript of the COL4A5 gene in XLAS patients and the presence of the COL4A5 gene splice variant c.4822–10T>C. Our findings indicate that the c.4822–10T>C splice variant leads to activation of nonsense-mediated mRNA degradation (NMD) and reduced COL4A5 mRNA expression, resulting in inadequate synthesis of the corresponding proteins. This aligns with the patient’s immunofluorescence results showing negative α5(IV) chain presence at the glomerular basement membrane, bursa, and tubular basement membrane, confirming the pathogenic nature of c.4822–10T>C.

Herein, a method of true-temperature inversion for a multi-wavelength pyrometer based on fractional-order particle-swarm optimization is proposed for difficult inversion problems with unknown emissivity. Fractional-order calculus has the inherent advantage of easily jumping out of local extreme values; here, it is introduced into the particle-swarm algorithm to invert the true temperature. An improved adaptive-adjustment mechanism is applied to automatically adjust the current velocity order of the particles and update their velocity and position values, increasing the accuracy of the true temperature values. The results of simulations using the proposed algorithm were compared with three algorithms using typical emissivity models: the internal penalty function algorithm, the optimization function (fmincon) algorithm, and the conventional particle-swarm optimization algorithm. The results show that the proposed algorithm has good accuracy for true-temperature inversion. Actual experimental results from a rocket-motor plume were used to demonstrate that the true-temperature inversion results of this algorithm are in good agreement with the theoretical true-temperature values.

Primary vesicoureteral reflux (VUR) is the prevailing congenital anomaly of the kidneys and urinary tract, posing a significant risk for pyelonephritis scarring and chronic renal insufficiency in pediatric patients. Nevertheless, the precise genetic etiology of VUR remains enigmatic. In this current investigation, we conducted whole-exome sequencing on a child exhibiting single kidney, devoid of any familial VUR background, along with both biological parents. Two missense variants (NM_019105.8: exon11: c.4111G>A and NM_019105.8: exon2: c.31A>T) in the TNXB gene were identified through whole-exome sequencing of the child. These variants were found to be inherited from the child’s parents, with each parent carrying one of the variants. Molecular dynamics simulations were conducted to assess the impact of these variants on the tenascin XB proteins encoded by them, revealing varying degrees of impairment. Based on our findings, it is suggested that the TNXB compound heterozygous variant, consisting of c.4111G>A and c.31A>T, may be the underlying cause of right renal agenesis and left hydronephrosis in afflicted child. This discovery broadens the genetic range of the TNXB gene and establishes a genetic foundation for disease-specific preimplantation genetic diagnosis (PGD) in prospective pregnancies involving the parents of this afflicted child.

The prevention and control of natural gas hydrates is an important link in ensuring winter production. Traditional thermodynamic inhibitors, like methanol, are commonly utilized due to their low unit costs and pricing, but they come with considerable safety issues when used on-site due to their high toxicity, flammability, and explosive potential. A cost-effective and eco-friendly hydrate inhibitor was created by combining light polyol amine with other ingredients to solve this problem. At a concentration of 30%, the product has a flash point greater than 80°C and a solidification point of -45°C. With success rates of 99% and 100%, respectively, it was used for winter casing pre-injection anti-freezing operations and balancing tank defoamer anti-freezing operations. Experiments have demonstrated the effectiveness of this inhibitor in preventing the formation of natural gas hydrates. In wintertime on-site anti-freezing activities, the projected cost can be substituted for methanol, as it is essentially equivalent to methanol.

Background. Peripheral blood mononuclear cells (PBMCs) serve as the immune system’s primary transportation hub outside of the affected ablated tissue. This study aims to explore the transcriptomic profiling of the immune response in PBMCs induced by microwave ablation (MWA) in low-risk thyroid cancer. Methods. For eight patients diagnosed with low-risk thyroid cancer, 10 ml of peripheral venous blood was collected before MWA as well as one day and one month after MWA. mRNA was extracted from PBMCs for transcriptome next-generation gene sequencing and qRT-PCR analyses. The plasma samples were used for chemokine detection purposes. Results. One day and one month after MWA, there were significant changes in GSEA, particularly in the NF-kappa B-TNFα pathway, inflammatory response, and early and late estrogen response. Common changes in differently expressed genes resulted in a significant downregulation of tumor-promoting genes (BCL3, NR6A1, and PFKFB3). One day after low-risk thyroid cancer MWA, GO enrichment analysis mainly revealed processes related to oxygen transport and other pathways. One month after MWA, GO enrichment analysis mainly revealed regulation of toll-like receptor signaling and other pathways. Furthermore, inflammation-related cytokines and regulatory genes, as well as tumor-promoting cytokines and regulatory genes, were downregulated after MWA. Conclusions. This study presents a comprehensive profile of the systemic immune response induced by thermal ablation for treating low-risk thyroid cancer. More significantly, this study provides valuable insight into potential references for systemic antitumor immunity of ablation against low-risk thyroid cancer. This trial is registered with ChiCTR1900024544.

Recently, owing to the good calcium bioavailability, peptide–calcium chelates made of various foods have been emerging. Hericium erinaceus, an edible fungus, is rich in proteins with a high proportion of calcium-binding amino acids. Thus, mushrooms serve as a good source to prepare peptide–calcium chelates. Herein, the conditions for hydrolyzing Hericium erinaceus peptides (HP) with a good calcium-binding rate (CBR) were investigated, followed by the optimization of HP–calcium chelate (HP-Ca) preparation. Furthermore, the structure of the new chelates was characterized along with the evaluation of gastrointestinal stability and calcium absorption. Papain and a hydrolysis time of 2 h were selected for preparing Hericium erinaceus peptides, and the conditions (pH 8.5, temperature 55°C, time 40 min, and mass ratio of peptide/CaCl2 4:1) were optimal to prepare HP-Ca. Under this condition, the chelates contained 6.79 ± 0.13% of calcium. The morphology and energy disperse spectroscopy (EDS) analysis showed that HP-Ca was loose and porous, with an obvious calcium element signal. The ultraviolet–visible (UV) absorption and Fourier transform infrared spectroscopy (FT-IR) analysis indicated that calcium possibly chelates to HP via interaction with free -COO- from acidic amino acids and C = O from amide. HP-Ca displayed good stability against stimulated gastrointestinal digestion. Moreover, HP-Ca significantly improved the calcium absorption by Caco-2 epithelial cells. Thus, HP-Ca is a promising Ca supplement with high calcium bioavailability.

ObjectiveTo systematically review and quantitively evaluate the efficacy and safety of mirabegron as a medical expulsive therapy for ureteral stones.MethodsWe performed an extensive search of the EMBASE and PubMed databases for studies examining the use of mirabegron as a medical expulsive therapy for ureteral stones. The primary outcome measure assessed was the stone expulsion rate (SER), while the secondary outcomes evaluated were the stone expulsion interval (SEI) and the occurrence of pain episodes during follow-up. Risk ratios (RRs) and mean differences (MDs) with their respective 95% CIs were calculated.ResultsWe included a total of seven studies involving 728 participants. Our analysis revealed a significant increase in the stone expulsion rate (SER) with mirabegron (RR = 1.40; 95% CI = 1.17–1.67; p

Summary: Prenatal stress has been extensively documented as a contributing factor to adverse cardiac development and function in fetuses and infants. The release of glucocorticoids (GCs), identified as a significant stressor, may be a potential factor inducing cardiac hypertrophy. However, the underlying mechanism remains largely unknown. Herein, we discovered that corticosterone (CORT) overload induced cardiac hypertrophy in embryonic chicks and fetal mice in vivo, as well as enlarged cardiomyocytes in vitro. The impaired mitochondria dynamics were observed in CORT-exposed cardiomyocytes, accompanied by dysfunction in oxidative phosphorylation and ATP production. This phenomenon was found to be linked to decreased mitochondrial fusion protein mitofusin 2 (MFN2). Subsequently, we found that CORT facilitated the ubiquitin-proteasome-system-dependent degradation of MFN2 with an enhanced binding of appoptosin to MFN2, serving as the underlying cause. Collectively, our findings provide a comprehensive understanding of the mechanisms by which exposure to stress hormones induces cardiac hypertrophy in fetuses.

Polarization-insensitive semiconductor optical amplifiers (SOAs) in all-optical networks can improve the signal-light quality and transmission rate. Herein, to reduce the gain sensitivity to polarization, a multi-quantum-well SOA in the 1550 nm band is designed, simulated, and developed. The active region mainly comprises the quaternary compound InGaAlAs, as differences in the potential barriers and wells of the components cause lattice mismatch. Consequently, a strained quantum well is generated, providing the SOA with gain insensitivity to the polarization state of light. In simulations, the SOA with ridge widths of 4 µm, 5 µm, and 6 µm is investigated. A 3 dB gain bandwidth of >140 nm is achieved with a 4 µm ridge width, whereas a 6 µm ridge width provides more output power and gain. The saturated output power is 150 mW (21.76 dB gain) at an input power of 0 dBm but increases to 233 mW (13.67 dB gain) at an input power of 10 dBm. The polarization sensitivity is

The paper presents a wide-bandwidth, low-polarization semiconductor optical amplifier (SOA) based on strained quantum wells. By enhancing the material gain of quantum wells for TM modes, we have extended the gain bandwidth of the SOA while reducing its polarization sensitivity. Through a combination of tilted waveguide design and cavity surface optical thin film design, we have effectively reduced the cavity surface reflectance of the SOA, thus decreasing device transmission losses and noise figure. At a wavelength of 1550 nm and a drive current of 1.4 A, the output power can reach 188 mW, with a small signal gain of 36.4 dB and a 3 dB gain bandwidth of 128 nm. The linewidth broadening is only 1.032 times. The polarization-dependent gain of the SOA is below 1.4 dB, and the noise figure is below 5.5 dB. The device employs only I-line lithography technology, offering simple fabrication processes and low costs yet delivering outstanding and stable performance. The designed SOA achieves wide gain bandwidth, high gain, low polarization sensitivity, low linewidth broadening, and low noise, promising significant applications in the wide-bandwidth optical communication field across the S + C + L bands.

Broad-area lasers (BALs) have found applications in a variety of crucial fields on account of their high output power and high energy transfer efficiency. However, they suffer from poor spatial beam quality due to multi-mode behavior along the waveguide transverse direction. In this paper, we propose a novel metasurface waveguide structure acting as a transverse mode selective back-reflector for BALs. In order to effectively inverse design such a structure, a digital adjoint algorithm is introduced to adapt the considerably large design area and the high degree of freedom. As a proof of the concept, a device structure with a design area of 40 × 20 μm2 is investigated. The simulation results exhibit high fundamental mode reflection (above 90%), while higher-order transverse mode reflections are suppressed below 0.2%. This is, to our knowledge, the largest device structure designed based on the inverse method. We exploited such a device and the method and further investigated the device’s robustness and feasibility of the inverse method. The results are elaborately discussed.