Search

To increase the effectiveness of using typical biomass waste as a resource, iridoids, chlorogenic acid, and flavonoids from the waste biomass of Eucommia ulmoides leaves (EULs) were extracted by deep eutectic solvents (DESs) in conjunction with macroporous resin. To optimize the extract conditions, the experiment of response surface was employed with the single-factor of DES composition molar ratio, liquid–solid ratio, water percentage, extraction temperature, and extraction time. The findings demonstrated that the theoretical simulated extraction yield of chlorogenic acid (CGA), geniposidic acid (GPA), aucubin (AU), geniposide (GP), rutin (RU), and isoquercetin (IQU) were 42.8, 137.2, 156.7, 5.4, 13.5, and 12.8 mg/g, respectively, under optimal conditions (hydrogen bond donor–hydrogen bond acceptor molar ratio of 1.96, liquid–solid ratio of 28.89 mL/g, water percentage of 38.44%, temperature of 317.36 K, and time of 55.59 min). Then, 12 resins were evaluated for their adsorption and desorption capabilities for the target components, and the HPD950 resin was found to operate at its optimum. Additionally, the HPD950 resin demonstrated significant sustainability and considerable potential in the recyclability test. Finally, the hypoglycemic in vitro, hypolipidemic in vitro, immunomodulatory, and anti-inflammatory effects of EUL extract were evaluated, and the correlation analysis of six active components with biological activity and physicochemical characteristics of DESs by heatmap were discussed. The findings of this study can offer a theoretical foundation for the extraction of valuable components by DESs from waste biomass, as well as specific utility benefits for the creation and development of natural products. [ABSTRACT FROM AUTHOR]

Lignanoids are an active ingredient exerting powerful antioxidant and anti-inflammatory effects in the treatment of many diseases. In order to improve the efficiency of the resource utilization of traditional Chinese medicine waste, Magnolia officinalis Rehder & E.H.Wilson residue (MOR) waste biomass was used as raw material in this study, and a series of deep eutectic solvents (ChUre, ChAce, ChPro, ChCit, ChOxa, ChMal, ChLac, ChLev, ChGly and ChEG) were selected to evaluate the extraction efficiency of lignanoids from MORs. The results showed that the best conditions for lignanoid extraction were a liquid–solid ratio of 40.50 mL/g, an HBD-HBA ratio of 2.06, a water percentage of 29.3%, an extract temperature of 337.65 K, and a time of 107 min. Under these conditions, the maximum lignanoid amount was 39.18 mg/g. In addition, the kinetics of the extraction process were investigated by mathematic modeling. In our antioxidant activity study, high antioxidant activity of the lignanoid extract was shown in scavenging four different types of free radicals (DPPH, ·OH, ABTS, and superoxide anions). At a concentration of 3 mg/mL, the total antioxidant capacity of the lignanoid extract was 1.795 U/mL, which was equal to 0.12 mg/mL of Vc solution. Furthermore, the antibacterial activity study found that the lignanoid extract exhibited good antibacterial effects against six tested pathogens. Among them, Staphylococcus aureus exerted the strongest antibacterial activity. Eventually, the correlation of the lignanoid extract with the biological activity and physicochemical properties of DESs is described using a heatmap, along with the evaluation of the in vitro hypoglycemic, in vitro hypolipidemic, immunomodulatory, and anti-inflammatory activity of the lignanoid extract. These findings can provide a theoretical foundation for the extraction of high-value components from waste biomass by deep eutectic solvents, as well as highlighting its specific significance in natural product development and utilization. [ABSTRACT FROM AUTHOR]

Organic dyes are widely used in many important areas, but they also bring many issues for water pollution. To address the above issues, a reconstructed kaolinite hybrid compound (γ-AlOOH@A-Kaol) was obtained from raw kaolinite (Kaol) in this work. The product was then characterized by X-ray diffraction (XRD), Fourier-transform infrared (ATR-FTIR), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM), and the absorption properties of γ-AlOOH@A-Kaol for congo red were further studied. The results demonstrated that flower-like γ-AlOOH with nanolamellae were uniformly loaded on the surface of acid-treated Kaol with a porous structure (A-Kaol). In addition, the surface area (36.5 m2/g), pore volume (0.146 cm3/g), and pore size (13.0 nm) of γ-AlOOH@A-Kaol were different from those of A-Kaol (127.4 m2/g, 0.127 cm3/g, and 4.28 nm, respectively) and γ-AlOOH (34.1 m2/g, 0.315 cm3/g, and 21.5 nm, respectively). The unique structure could significantly enhance the sorption capacity for congo red, which could exceed 1000 mg/g. The reasons may be ascribed to the abundant groups of -OH, large specific surface area, and porous structure of γ-AlOOH@A-Kaol. This work provides an efficient route for comprehensive utilization and production of Kaol-based compound materials that could be used in the field of environmental conservation. [ABSTRACT FROM AUTHOR]

In this work, a bio-based material (CGP) is obtained by combing chitosan, gelatin and polyvinyl alcohol through a simple solution mixing to simultaneously address polylactic acid film (PLA)' flammability and poor barrier, toughness and antibacterial properties by soaking. The results of open fire testing show that modified PLA films can effectively prolong the combustion time, improve the thermal stability and reduce the release of heat in the cone calorimeter test. For the PLA sample after soaking for 5 times (PLA-5) in particular, it can reduce the peak heat release rate (pHRR) and total heat release (THR) values to 85.8 kW/m2 and 1.3 MJ/m2 from the values of 129.5 kW/m2 and 1.8 MJ/m2 for PLA, respectively. Structural analysis suggests that CGP primarily operates in the condensed phase by forming physical barriers. Meanwhile, the modified PLA films can exhibit superior barrier effects, which indicate the oxygen transmission rate value of PLA-5 decreases to 0.9 cm3/(m2·day) from the 392.5 cm3/(m2·day) of raw PLA film. Moreover, the PLA-5 also have excellent toughness (the value increased to 200.5 % from 31.0 %) and persistent antibacterial effects (it still has 100 % sterilization after 500 days). • A bio-based multi-functional coating (CGP) was fabricated and coated on the PLA film. • CGP (average thickness was 1.26 μm) could as a fire shield for underlying substrates. • The flame-retardant mechanism was deeply studied of PLA-5. • PLA-5 strain was obviously enhanced vis-à-vis PLA, and the reason was deeply studied. • CGP can endow PLA with excellent properties of barrier and persistent antibacterial. [ABSTRACT FROM AUTHOR]

Ethylene vinyl acetate copolymer (EVA) is widely applied in many important fields, but its broader utility is impeded by its flammability. To address this problem, the pre-acidified kaolinite (AKaol) by sulfuric acid was further dealt with TiO 2 loading and Zn2+ doping to obtain Zn/TiO 2 @AKaol to improve the flame retardancy and smoke suppression of EVA composites containing intumescent flame retardants (IFR) typically. The results showed that the addition of 1 wt% Zn/TiO 2 @AKaol improved the flame retardancy and reduced the smoke release of EVA/IFR composite. The limiting oxygen index (LOI) value of the EVA/IFR composite containing Zn/TiO 2 @AKaol increased to 32.7 % from 27.3 % of EVA/IFR composite. In the cone calorimeter test (CCT), the peak heat release rate (pHRR) and total heat release (THR) values were reduced to 297.5 kW/m2 and 98.8 MJ/m2 from the 409.9 kW/m2 and 109.3 MJ/m2 of EVA/IFR composite, respectively. Meanwhile, the values of total smoke production (TSP) in the CCT and smoke density tests in building materials were reduced to 13.5 m2 and 33.39 % of EVA/IFR/Zn/TiO 2 @AKaol composite from 18.4 m2 and 63.91 % of EVA/IFR composite, respectively. Based on the mechanism analysis, it was proposed that Zn/TiO 2 @AKaol not only promoted the production of P· in advance, but also increased a cross-linked structure char in the condensed phase to achieve flame retardancy and smoke suppression of EVA composites. [ABSTRACT FROM AUTHOR]