Search

This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide (Ta2O5) Bragg reflectors on silicon (Si) wafer. The stack is analyzed with X-ray reflectivity (XRR) and high-resolution X-ray diffraction (HRXRD). The resonator shows a coupling coefficient (k2) of 2.0%, high series quality factor (Qs) of 156, shunt quality factor (Qp) of 142, and maximum Bode quality factor (Qmax) of 210. The third-order harmonics at 59.64 GHz is also observed with k2 around 0.6% and Q around 40. Upon further development, the reported acoustic resonator platform can enable various front-end signal-processing functions, e.g., filters and oscillators, at future frequency range 3 (FR3) bands., Comment: 5 pages, 9 figures, 5 tables

This work reports the procedure for modeling piezoelectric acoustic resonators and filters at millimeter wave (mmWave). Different from conventional methods for lower frequency piezoelectric devices, we include both acoustic and electromagnetic (EM) effects, e.g., self-inductance, in both the circuit-level fitting and finite element analysis, toward higher accuracy at higher frequencies. To validate the method, thin-film lithium niobate (LiNbO3) first-order antisymmetric (A1) mode devices are used as the testbed, achieving great agreement for both the standalone resonators and a fifth-order ladder filter. Upon further development, the reported acoustic and EM co-modeling could guide the future design of compact piezoelectric devices at mmWave and beyond., Comment: 6 pages, 11 figures, submitted to IEEE JMEMS

As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode enable monolithic multi-frequency fabrication, transversal filters, correlators, and other compact signal processing components. In this work, we present thin-film lithium niobate (LN) S0 resonators scaled up to 16 GHz. Specifically, we study the characteristics of the S0 mode as the wavelength is minimized and showcase a device at 14.9 GHz with a Bode Q maximum of 391, a k2 of 6%, and a figure of merit (FoM) of 23.33, surpassing the state-of-the-art (SoA) in its frequency range., Comment: 4 pages, 8 figures, to be presetned in Hilton Head 2024,the 19th in the series of Hilton Head Workshops on the science and technology of solid-state sensors, actuators, and microsystems

Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard limit using typical transducer designs. In this work, we present an ultra-wideband transducer design utilizing a tapered electrode configuration to overcome this limitation. The design is realized on a lithium niobate (LN) on silicon carbide platform, utilizing a combination of first and higher order shear-horizontal modes to generate the ultra-wideband response. The implementation shows a fractional bandwidth (FBW) of 55% at 2.23 GHz with an associated insertion loss (IL) of 26 dB for the measured 50 ohm case. Upon improved impedance matching, this performance could be improved to 79% FBW and an IL of 16.5 dB. Upon further development, this ultra-wideband design could be reasonably scaled towards improved FBW and IL trade off to enable improved usability for cases where bandwidth should be prioritized., Comment: 4 pages, 5 figures, to be presetned in Hilton Head 2024,the 19th in the series of Hilton Head Workshops on the science and technology of solid-state sensors, actuators, and microsystems

This work reports the first study of periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) resonators at cryogenic temperatures. We experimentally investigate the temperature dependency of resonant frequencies and quality factor (Q) of higher-order Lamb modes up to 20 GHz between 80{\deg}K and 297{\deg}K, using a tri-layer P3F LiNbO3 resonators as the experimental platform. The supported thickness-shear Lamb modes between second-order symmetric (S2) and eleventh-order antisymmetric (A11) modes show temperature coefficients of frequency (TCF) averaging -68.8 ppm/K. Higher Q and more pronounced spurious modes are observed at lower temperatures for many modes. Upon further study, the cryogenic study will be crucial for identifying dominant loss mechanisms and origins of spurious modes in higher-order Lamb wave devices for millimeter-wave applications., Comment: 4 pages, 4 figures, submitted to IEEE IMS 2024

In this work, we demonstrate a C-band shear-horizontal surface acoustic wave (SH-SAW) resonator with high electromechanical coupling (kt2) of 22% and a quality factor (Q) of 565 based on a thin-film lithium niobate (LN) on silicon carbide (SiC) platform, featuring an excellent figure-of-merit (FoM = kt2*Q ) of 124 at 6.5 GHz, the highest FoM reported in this frequency range. The resonator frequency upscaling is achieved through wavelength ($\lambda$) reduction and the use of thin aluminum (Al) electrodes. The LN/SiC waveguide and synchronous resonator design collectively enable effective acoustic energy confinement for a high FoM, even when the normalized thickness of LN approaches a scale of 0.5$\lambda$ to 1$\lambda$. To perform a comprehensive study, we also designed and fabricated five additional resonators, expending the $\lambda$ studied ranging from 480 to 800 nm, in the same 500 nm-thick transferred Y-cut thin-film LN on SiC. The fabricated SH-SAW resonators, operating from 5 to 8 GHz, experimentally demonstrate a kt2 from 20.3% to 22.9% and a Q from 350 to 575, thereby covering the entire C-band with excellent performance., Comment: 4 pages, 5 figures, 1 table

This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter features a compact footprint of 0.64 mm2. The third-order ladder filter is implemented with electrically coupled resonators in 150 nm bi-layer P3F 128 rotated Y-cut LiNbO3 thin film, operating in second-order symmetric (S2) Lamb mode. The record-breaking performance is enabled by the P3F LiNbO3 platform, where piezoelectric thin films of alternating orientations are transferred subsequently, facilitating efficient higher-order Lamb mode operation with simultaneously high quality factor (Q) and coupling coefficient (k2) at millimeter-wave (mmWave). Also, the multi-layer P3F stack promises smaller footprints and better nonlinearity than single-layer counterparts, thanks to the higher capacitance density and lower thermal resistance. Upon further development, the reported P3F LiNbO3 platform is promising for compact filters at mmWave., Comment: 4 pages, 7 figures, IEEE Microwave and Wireless Technology Letters

In this work, we investigate the frequency scaling of shear-horizontal (S.H.) surface acoustic wave (SAW) resonators based on a lithium niobate on insulator (LNOI) substrate into the centimeter bands for 6G wireless systems. Prototyped resonators with wavelengths ranging between 240 nm and 400 nm were fabricated, and the experimental results exhibit a successful frequency scaling between 9.05 and 13.37 GHz. However, a noticeable performance degradation can be observed as the resonance frequency (fs) scales. Such an effect is expected to be caused by non-ideal helec/{\lambda} for smaller {\lambda} devices. The optimized LNOI SH-SAW with a {\lambda} of 400 nm exhibits a fs of 9.05 GHz, a keff2 of 15%, Qmax of 213 and a FoM of 32, which indicates a successful implementation for device targeting centimeter bands., Comment: 4 pages, 7 figures, 1 table, submitted to IEEE IC-MAM 2024