Search

Lightweight fibre-reinforced concrete integrates the advantages of lightweight aggregates with the strength-enhancing properties of fibres, resulting in a lighter composite with enhanced impact and mechanical performance. However, achieving an optimal balance between structural weight, and performance remains a challenging endeavour. This study investigates the mechanical properties, impact energy absorptions, flexural toughness, and crack resistance of lightweight fibre-reinforced concrete with the coarse aggregate entirely replaced with lightweight expanded clay aggregate (LECA). Concrete mixes containing 0 %, 0.5 %, 0.75 %, and 1.0 % Polypropylene fibre (PPF) and 10 % micro-silica were experimentally investigated. Predictions for concrete mixes with up to 2 % PPF were made using regression models developed from experimental data. The experimental and predicted results were analysed using response surface methodology. The findings reveal significant enhancements of up to 300 % and 570 % in toughness indices I5 and I10 at 1 % PPF, coupled with a 55.4 % increase in residual strength. Furthermore, an optimised slab thickness of 47 mm containing 1.73 % PPF yielded optimal impact energy absorption of 680 J and 2384 J and crack resistance of 3823 MPa and 16279 MPa at service and ultimate loading, respectively. These metrics represent improvements of 4.8, 15.2, 37, and 56 times, respectively, compared to the control samples. These substantial advancements highlight the potential of lightweight fibre-reinforced LECA concrete in engineering applications where balancing impact energy absorption, crack resistance, and structural weight is crucial. This innovative approach promises a transformative impact on the construction industry, paving the way for more efficient and resilient infrastructure.

Adding polypropylene fibre (PPF) to recycled aggregate concrete (RAC) not only improves performance but also has economic benefits. The effects of single-blend and double-blend micro- and macro-PPFs in RAC specimens were studied. Micro- and macro-PPFs were used to design and produce 30 groups of PPF-reinforced RAC specimens with 0%, 25% and 50% coarse aggregate (CA) substitution rates. Controlling the fibre mixing proportions, the stress–strain curve, elastic modulus, peak strength, peak strain and acoustic emission amplitude–frequency extremum (AFE) of each group of specimens were obtained. The elastic modulus and peak stress of specimens without PPFs decreases gradually with an increase of the CA substitution rate. However, there was a certain increase in elastic modulus and peak stress when PPFs were added. A damage constitutive model for PPF-reinforced RAC was established. By fitting this model, it was found that although the elastic modulus and peak stress of the RAC specimens increased by a certain extent, the fitting parameters of RAC were greater than those of ordinary concrete and the RAC post-peak strength was lower. The evolution law of acoustic emission AFE of PPF-reinforced RAC was studied. It was found that the cumulative AFE of RAC with PPF was larger, indicating that the PPFs limited crack propagation and increased the fracture energy. [ABSTRACT FROM AUTHOR]

An indoor accelerated freezing and thawing test of polypropylene fibre-reinforced concrete in chloride and sulphate environments was conducted using the "fast-freezing method" with the objective of investigating the damage law of the post-freezing mechanical properties of hydraulic concrete structures and studying the effects of different mixing amounts of polypropylene fibres on the mechanical properties of concrete. Furthermore, in order to reduce the cost of concrete tests and shorten the time required for conducting concrete tests, a backpropagation neural network based on a Beetle Antenna Search algorithm (BAS-BPNN) was established to simulate and predict the mechanical properties of polypropylene fibre-reinforced concrete. The accuracy of the model was verified. The results indicate that the order of improvement in the macro-physical properties of concrete due to fibre doping is as follows: PPF1.2 exhibited the greatest improvement in macro-physical properties of concrete, followed by PPF0.9, PPF1.5, PPF0.6, and PC. When the freezing and thawing medium and the number of cycles are identical, all four assessment indexes (R2, RMSE, SI, MAPE) demonstrate that the four groups of polypropylene fibre concrete exhibit superior performance to the control group of ordinary concrete. This indicates that polypropylene fibre can enhance the mechanical properties and freezing resistance of the concrete matrix, delay the process of freezing and thawing damage to the matrix, and extend the lifespan of the matrix, yet cannot prevent the ultimate failure of the matrix. The application of intelligent algorithms to optimise the parameters of an artificial neural network model can enhance its capacity to generalise and predict the mechanical properties of concrete. In terms of the coefficient of determination (R2), the Beetle Antenna Search algorithm (0.9782) outperforms the Particle Swarm Optimization (PSO; 0.9676), the Genetic Algorithm (GA; 0.9645), and the backpropagation neural network (BPNN; 0.9460). The improved backpropagation neural network based on the Beetle Antenna Search algorithm not only avoids the trap of local optimality but also improves the model accuracy while further accelerating the convergence speed. This approach can address the complexity, non-linearity, and modelling difficulties encountered during the freezing process of concrete. Moreover, it offers relatively accurate prediction outcomes at a reduced cost in comparison to traditional experimental methodologies. [ABSTRACT FROM AUTHOR]

The research aims to study the behaviour of concrete columns reinforced with fibreglass as bars exposed to seawater. Firstly, hardened concrete properties as the compressive strength and the tensile strength were investigated at ages 14, 28, and 56 days. Secondly, the experimental testing also involved casting 18 short concrete columns that have a length of 300 mm with the cross-sectional dimensions of 100 mm × 100 mm. Six samples were plain concrete, six were reinforced with a diameter of 6 mm longitudinal fibreglass bars, and six polypropylene fibre concrete columns were reinforced with a diameter of 6 mm fibreglass bars. The results added useful information using fibreglass bars (anti-corrosion materials) as reinforced longitudinal concrete columns, so the ultimate load of the reinforced concrete column with fibreglass rod exposed to seawater was 174.8 kN that it was higher than that of the plain concrete column at 104.9 kN. Thus, the fibreglass reinforcement technology enhances the capacity of the columns. So, it could be used in non-impacting structural parts. Meanwhile, the ultimate load of the fibre-reinforced concrete column with fibreglass rod exposed to seawater was 201.8 kN. It is 15.4% higher than that of the ultimate axial load of the reinforced concrete column with fibreglass rods only. Also, the results achieved of this research were encouraging, as the maximum failure load for short columns reinforced with fibreglass rods reached approximately 84 to 87% of failure load relative to polypropylene fibre concrete columns containing reinforcing fibreglass bars. As a result, the structural behaviour bars have been enhanced using fibreglass rod and polypropylene fibre.

With the rapid development of the global construction industry, not only a large amount of construction waste has been derived, but also a growing shortage of natural sand resources emerges. Aiming at the above problems, this study uses waste concrete and artificial sand as recycled coarse and fine aggregates to form a new type of recycled concrete. 135 standard cubes and prismatic test blocks were produced. Concrete mixtures were prepared with recycled concrete aggregate and artificial sand to fully replace natural aggregates. This study investigates the mechanical properties of recycled concrete containing artificial sand and polypropylene fibers. Polypropylene fiber content varied from 0-1.5% by mass. Experimental results showed the addition of fibers enhanced the compressive strength and ductility. The optimum fiber dosage was 0.6% for strength gain. However, elastic modulus decreased with increasing fiber content due to increased porosity. The findings demonstrate the feasibility of recycled concrete with artificial sand and polypropylene fibers as an environmentally-friendly construction material.

The Fibre reinforced concrete (FRC) has become popular in construction industry in last few decades. Various natural and artificial fibres are added in concrete to enhance the crack resistance property by developing some bonding between fibre and concrete. FRC is not only performs better than conventional concrete but also the fibre reinforced concrete (FRC) has become popular in construction industry in last few decades. FRC is not only performs better than conventional concrete but also it reduces environmental pollution. Actually in many rural area, people are not concerned about the pollution and hygiene. The unused portion of sugarcane fibre, banana fibre, jute fibre are thrown into pond/ lake. After few days they decompose and rotten, that causes pollution in waterbody and disturb the ecosystem. The fibres can be used as additive in concrete to enhance their overall performance as well as to reduce environmental pollution. In this paper, a state-of-art review has been investigated on FRC and its different benefits. Different fibres such as jute fibre, coconut fibre, polypropylene, basalt, areca leaf, glass, mask, plastic, carbon and steel fibre were incorporated in concrete by several researchers in the past decades that have been highlighted in detail in this paper. The performance has been evaluated in terms of load displacement hysteretic pattern, stiffness, ductility, energy dissipation, crack resistance, durability and workability of FRC. The virtue and limitations of FRC have also been discussed. From the existing literature, it is found that the performance of FRC under dynamic load, Damage assessment, Time dependent assessment of damage, Effect of fibre in high-performance concrete (HPFRC) and Life cycle assessment are found as major literature gap that needs to be fulfilled. A case study on damage assessment of FRC has also been conducted in this paper. From the result it is found that the Carbon fibre reinforced concrete (CFRC), Steel fibre reinforced concrete (SFRC) and Areca leaf sheath fibre reinforced concrete (ALSFRC) are experiencing lesser damage in compared to normal concrete without fibre. Based on the existing literature the future scope and probable direction of research of FRC have also been highlighted. [ABSTRACT FROM AUTHOR]

Incomplete data indicate that coal gangue is accumulated in China, with over 2000 gangue hills covering an area exceeding 200,000 mu and an annual growth rate surpassing 800 million tons. This accumulation not only signifies a substantial waste of resources but also poses a significant danger to the environment. Utilizing coal gangue as an aggregate in the production of coal-gangue concrete offers an effective avenue for coal-gangue recycling. However, compared with ordinary concrete, the strength and ductility of coal-gangue concrete require enhancement. Due to coal-gangue concrete having higher brittleness and lower deformation resistance than ordinary concrete, basalt fibre (BF) is a green, high-performance fibre that exhibits excellent bonding properties with cement-based materials, and polypropylene fibre (PF) is a flexible fibre with high deformability; thus, we determine if adding BF and PF to coal-gangue concrete can enhance its ductility and strength. In this paper, the stress–strain curve trends of different hybrid basalt–polypropylene fibre-reinforced coal-gangue concrete (HBPRGC) specimens under uniaxial compression are studied when the matrix strengths are C20 and C30. The effects of BF and PF on the mechanical and energy conversion behaviours of coal-gangue concrete are analysed. The results show that the ductile deformation of coal-gangue concrete can be markedly enhanced at a 0.1% hybrid-fibre volume content; HBPRGC-20-0.1 and HBPRGC-30-0.1 have elevations of 53.66% and 51.45% in total strain energy and 54.11% and 50% in dissipative energy, respectively. And HBPRGC-20-0.2 and HBPRGC-30-0.2 have elevations of 31.95% and 30.32% in total strain energy and −3.46% and 28.71% in dissipative energy, respectively. With hybrid-fibre volume content increased, the elastic modulus, the total strain energy, and the dissipative energy all show a downward trend. Therefore, 0.1% seems to be the optimum hybrid-fibre volume content for well-enhancing the ductility and strength of coal-gangue concrete. Finally, the damage evolution and deformation trends of coal-gangue concrete doped with fibre under uniaxial action are studied theoretically, and the constitutive model and damage evolution equation of HBPRGC are established based on Weibull theory The model and the equation are in good agreement with the experimental results. [ABSTRACT FROM AUTHOR]

An indoor accelerated freezing and thawing test of polypropylene fibre-reinforced concrete in chloride and sulphate environments was conducted using the “fast-freezing method” with the objective of investigating the damage law of the post-freezing mechanical properties of hydraulic concrete structures and studying the effects of different mixing amounts of polypropylene fibres on the mechanical properties of concrete. Furthermore, in order to reduce the cost of concrete tests and shorten the time required for conducting concrete tests, a backpropagation neural network based on a Beetle Antenna Search algorithm (BAS-BPNN) was established to simulate and predict the mechanical properties of polypropylene fibre-reinforced concrete. The accuracy of the model was verified. The results indicate that the order of improvement in the macro-physical properties of concrete due to fibre doping is as follows: PPF1.2 exhibited the greatest improvement in macro-physical properties of concrete, followed by PPF0.9, PPF1.5, PPF0.6, and PC. When the freezing and thawing medium and the number of cycles are identical, all four assessment indexes (R2, RMSE, SI, MAPE) demonstrate that the four groups of polypropylene fibre concrete exhibit superior performance to the control group of ordinary concrete. This indicates that polypropylene fibre can enhance the mechanical properties and freezing resistance of the concrete matrix, delay the process of freezing and thawing damage to the matrix, and extend the lifespan of the matrix, yet cannot prevent the ultimate failure of the matrix. The application of intelligent algorithms to optimise the parameters of an artificial neural network model can enhance its capacity to generalise and predict the mechanical properties of concrete. In terms of the coefficient of determination (R2), the Beetle Antenna Search algorithm (0.9782) outperforms the Particle Swarm Optimization (PSO; 0.9676), the Genetic Algorithm (GA; 0.9645), and the backpropagation neural network (BPNN; 0.9460). The improved backpropagation neural network based on the Beetle Antenna Search algorithm not only avoids the trap of local optimality but also improves the model accuracy while further accelerating the convergence speed. This approach can address the complexity, non-linearity, and modelling difficulties encountered during the freezing process of concrete. Moreover, it offers relatively accurate prediction outcomes at a reduced cost in comparison to traditional experimental methodologies.

Incomplete data indicate that coal gangue is accumulated in China, with over 2000 gangue hills covering an area exceeding 200,000 mu and an annual growth rate surpassing 800 million tons. This accumulation not only signifies a substantial waste of resources but also poses a significant danger to the environment. Utilizing coal gangue as an aggregate in the production of coal-gangue concrete offers an effective avenue for coal-gangue recycling. However, compared with ordinary concrete, the strength and ductility of coal-gangue concrete require enhancement. Due to coal-gangue concrete having higher brittleness and lower deformation resistance than ordinary concrete, basalt fibre (BF) is a green, high-performance fibre that exhibits excellent bonding properties with cement-based materials, and polypropylene fibre (PF) is a flexible fibre with high deformability; thus, we determine if adding BF and PF to coal-gangue concrete can enhance its ductility and strength. In this paper, the stress–strain curve trends of different hybrid basalt–polypropylene fibre-reinforced coal-gangue concrete (HBPRGC) specimens under uniaxial compression are studied when the matrix strengths are C20 and C30. The effects of BF and PF on the mechanical and energy conversion behaviours of coal-gangue concrete are analysed. The results show that the ductile deformation of coal-gangue concrete can be markedly enhanced at a 0.1% hybrid-fibre volume content; HBPRGC-20-0.1 and HBPRGC-30-0.1 have elevations of 53.66% and 51.45% in total strain energy and 54.11% and 50% in dissipative energy, respectively. And HBPRGC-20-0.2 and HBPRGC-30-0.2 have elevations of 31.95% and 30.32% in total strain energy and −3.46% and 28.71% in dissipative energy, respectively. With hybrid-fibre volume content increased, the elastic modulus, the total strain energy, and the dissipative energy all show a downward trend. Therefore, 0.1% seems to be the optimum hybrid-fibre volume content for well-enhancing the ductility and strength of coal-gangue concrete. Finally, the damage evolution and deformation trends of coal-gangue concrete doped with fibre under uniaxial action are studied theoretically, and the constitutive model and damage evolution equation of HBPRGC are established based on Weibull theory The model and the equation are in good agreement with the experimental results.

This study was conducted to experimentally demonstrate the control the nano-, micro- and macro-scale cracking in cement-based composites by using nano-, micro- and macro-scale fibres. While micro, macro and hybrid system polypropylene (PP) fibres were used in concrete designs, micro-scale PP and multi-walled carbon nano tubes (MWCNT) were utilized in mortar mixtures. The progression of the cracks was monitored in accordance with a well-known standard and also with a modified method which enabled the investigation of plastic and restrained shrinkage. Fracture energy, flexural strength, compressive strength, modulus of elasticity and ultrasonic pulse velocity of the samples were also determined as the mechanical properties of the composites. Results showed significant improvements in the reduction of cracks, especially with hybrid fibres system. • Cracks at three levels (nano, micro and macro level) were controlled. • Effects of hybrid PP fibres on shrinkage and mechanical properties. • MWCNT dispersion without ultrasonification. • Modified test method was used for combined plastic and restrained shrinkage. • Flexural strength and fracture energy were improved by the use of fibres. [ABSTRACT FROM AUTHOR]

Economic and environmentally friendly polypropylene (PP) fibre and polyvinyl alcohol (PVA) fibre were found to be beneficial to the strength of recycled coarse aggregate concrete (RCAC), but the effects in the fracture properties of the RCAC has been overlooked. This study added PP fibre and PVA fibre to enhance the ability of the RCAC to resist crack instability expansion. The three-point bending tests were performed to compare the fracture properties of the RCAC with fibres and without fibre. The reinforcement mechanism of fibres was analyzed by the single-fibre pullout tests and scanning electron microscopy tests. The experimental results indicated that fibres could not effectively increase the compressive strength of RCAC but the splitting tensile strength of RCAC was significantly improved with the increase of the volume fraction of fibres and the optimal volume fraction of fibre was 1.5% PP fibre. The PP fibre and PVA fibre both effectively improved the fracture properties of RCAC but acted in the post-cracking stage and the linear loading stage, respectively. As a concrete manifestation of the PP fibre was more effective in increasing the peak load, unstable toughness, and fracture energy of RCAC than the PVA fibre while the PVA fibre was more effective in increasing the initial cracking load and the initial toughness. The 1.0% PP fibre had the best effect on the fracture properties, which increased peak load, unstable toughness, and fracture energy by 47.2%, 42.3%, and 5500%, respectively. The 0.2% PVA has the best effect on the fracture properties of RCAC at the stage before the cracks developed which increased initial cracking load and initial toughness by 25.2% and 43.7%, respectively. In addition, the development of cracks of RCAC with PP fibre was more tortuous than that of RCAC with PVA fibre. A reinforcement mechanism analysis showed that there were obvious diamond-shaped depressions on the surface of PP fibre which provided mechanical interlock to enhance the RCAC. The hydrogen bonds of PVA fibre also enhanced the RCAC through the hydration products attached to the surface of the PVA but it is weaker than diamond-shaped depressions. These results provided theoretical and experimental support for the research gap of PP fibre and PVA fibre in RCAC. • Roles of PP fibre and PVA fibre in the fracture properties of RCAC were explored. • The crack propagation of RCAC with PP and PVA fibre was observed based on the DIC technique. • The fracture mechanism of RCAC with PP and PVA fibre was discussed. [ABSTRACT FROM AUTHOR]