Search

Background and Purpose: While patient-specific quality assurance (PSQA) has been integral to intensity-modulated treatments, its value is debated. A systems approach to safety is essential for understanding complex systems like radiation oncology but is often overlooked in PSQA research. This study aims to elucidate PSQA's fundamental value and identify opportunities for enhancing safety in intensity-modulated treatments., Materials and Methods: First, causal scenarios that could lead to patient harm were identified using a prospective safety assessment technique developed for complex systems. Second, PSQA's ability to mitigate these scenarios was evaluated using standard stability and control principles. The analysis also included safeguards related to PSQA, such as daily linac QA, equipment commissioning, and equipment design., Results: Ten causal scenarios were identified, highlighting well-known issues like flawed algorithms, data corruption, and hardware errors. Mitigation is achieved through advanced dose calculation and optimization algorithms, software and data integration, and preconfigured beam data, which improve decision-making and system state determination. Modern linac control systems enhance all aspects of system stability and control. Commissioning, daily linac QA, and PSQA are effective in enhancing the determination of system states only when feedback is non-overlapping and unambiguous., Conclusion: Given equipment improvement and related safeguards, the feedback generated from PSQA has diminished in value. To better complement other safeguards, PSQA should evolve to provide automated, unambiguous detection of any potential catastrophic treatment deviations prior to treatment. This evolution would allow physicists to focus on more critical aspects of patient care in radiation oncology., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Background: Quality assurance (QA) on a daily basis is an essential task in radiotherapy. In pencil beam scanning proton therapy (PBS), there is a lack of available practical QA devices for routine daily QA in comparison to conventional radiotherapy., Purpose: The aim was to characterize and evaluate a prototype for the task of daily QA routine for PBS with parameters recommended by the AAPM TG 224, that is, the dose output constancy, the spot position and the distal range verification. Furthermore, a time efficient calibration method for fast and reliable daily QA routine was established for the prototype., Methods: First, a calibration routine was designed and evaluated, which characterizes the array response and allows for a conversion of the measured signal to clinically needed QA parameters. Finally, a time and resource efficient daily QA routine was developed and tested., Results: The prototype array can distinguish spot position deviations with sub-millimeter accuracy, as well as changes in the spot size in terms of FWHM with a 2 % $\%$ sensitivity. The range and thus the energy can be evaluated at different depths also with sub-millimeter precision. After some training, the setup of the prototype device took roughly two minutes and the total beamtime was about one minute on cyclotron site and five minutes for synchrotrons., Conclusions: A prototype for daily QA in spot scanning proton therapy was evaluated, which features a fast and easy setup and allows for measuring relevant beam parameters, typically within less than a minute of beam time. All QA parameters as recommended by the AAPM TG 224 report can be analyzed with sufficient accuracy., (© 2024 Sun Nuclear Corp. Journal of Applied Clinical Medical Physics published by Wiley Periodicals LLC on behalf of American Association of Physicists in Medicine.)

Introduction: New radiotherapy machines such as Halcyon are capable of delivering dose-rate of 600 monitor-units per minute, allowing large numbers of patients treated per day. However, patient-specific quality assurance (QA) is still required, which dramatically decrease machine availability. Innovative artificial intelligence (AI) algorithms could predict QA result based on complexity metrics. However, no AI solution exists for Halcyon machines and the complexity metrics to be used have not been definitively determined. The aim of this study was to develop an AI solution capable of firstly determining the complexity indices to be obtained and secondly predicting patient-specific QA in a routine clinical setting., Methods: Three hundred and eighteen beams from 56 patients with breast cancer were used. The seven complexity indices named Modulation-Complexity-Score (MCS), Small-Aperture-Score (SAS10), Beam-Area (BA), Beam-Irregularity (BI), Beam-Modulation (BM), Gantry and Collimator angles were used as input to the AI model. Machine learning (ML) and deep learning (DL) models using tensorflow were set up to predict DreamDose QA conformance., Results: MCS, BI, gantry and collimator angle are not correlated with QA compliance. Therefore, ML and DL models were trained using SAS10, BA and BM complexity indices. ROC analyses enabled to find best predicted probability threshold to increase specificity and sensitivity. ML models did not show satisfactory performance with an area under-the-curve (AUC) of 0.75 and specificity and sensitivity of 0.88 and 0.86. However, optimised DL model showed better performance with an AUC of 0.95 and specificity and sensitivity of 0.98 and 0.97., Conclusion: The DL model demonstrated a high degree of accuracy in its predictions of the quality assurance (QA) results. Our online predictive QA-platform offers significant time savings in terms of accelerator occupancy and working time., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Purpose: Volumetric modulated arc therapy (VMAT) is a widespread technique for the delivery of normo-fractionated radiation therapy (NFRT) and stereotactic body radiation therapy (SBRT). It is associated with a significant hardware burden requiring dose rate modulation, collimator movement and gantry rotation synchronisation. Patient specific quality assurance (PSQA) guarantees that the linacs can precisely and accurately deliver the planned dose. However, PSQA requires a significant time allocation and class solutions to reduce this while guaranteeing the deliverability of the plans should be investigated., Methods: In this study, an in-house developed Eclipse Scripting API (ESAPI) script was used to extract five independent plan complexity metrics from N = 667 VMAT treatment fields. The correlation between metrics and portal dosimetry measurements was investigated with Pearson correlation, box plot analysis and receiver operating characteristic curves, which were used to defined the best performing metric and its threshold., Results: The incidence of fields failing the clinical PSQA criteria of 3%/2mm (NFRT) and 3%/1.5mm (SBRT) was low (N = 1). The mean MLC opening was the metric with the highest correlation with the portal dosimetry data and among the best in discriminating the requirement of PSQA. The thresholds of 16.12 mm (NFRT) and 7.96 mm (SBRT) corresponded to true positive rates higher than 90%., Conclusions: This work presents a quantitative approach to reduce the time allocation for PSQA by identifying the most complex plans demanding a dedicated measurement. The proposed method requires PSQA for approximately 10% of the plans. The ESAPI script is distributed open-source to ease the investigation and implementation at other institutions., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier GmbH.. All rights reserved.)

This study aimed to investigate the influence of gantry angle increment (Inc) parameters on the Monaco treatment planning system for volumetric modulated arc therapy (VMAT) in right breast cancer, and to determine the optimal Inc parameters. Twenty-three patients with right breast cancer at the Sir Run Run Shaw Hospital from August 2022 to August 2023 were retrospectively selected. Four VMAT plans were generated for each patient incorporating Inc of 10°, 20° (control group), 30°, and 40°, while the other optimization parameters and constraint functions remained constant. The D98 and conformity index were lower in the Inc30 and Inc40 groups than in the Inc20 group. As Inc increased from 10° to 30°, the irradiated dose to the ipsilateral lung, including the V20, V5, and Dmax, mean dose, gradually increased. There were no statistically significant differences in the irradiated dose to the contralateral breast, contralateral lung, heart, esophagus, and brachial plexus. The number of monitor units and control points decreased with increasing Inc. Smaller Inc values can achieve higher target coverage and lower irradiated dose to the ipsilateral lung, but will reduce delivery efficiency. Considering the plan quality and delivery efficiency, an Inc of 10° or 20° is recommended for right breast cancer VMAT plans., Competing Interests: The authors have no conflicts of interest to disclose., (Copyright © 2024 the Author(s). Published by Wolters Kluwer Health, Inc.)

Purpose: To determine if patient-specific IMRT quality assurance can be measured on any matched treatment delivery system (TDS) for patient treatment delivery on another., Methods: Three VMAT plans of varying complexity were created for each available energy for head and neck, SBRT lung, and right chestwall anatomical sites. Each plan was delivered on three matched Varian TrueBeam TDSs to the same Scandidos Delta 4 Phantom+ diode array with only energy-specific device calibrations. Dose distributions were corrected for TDS output and then compared to TPS calculations using gamma analysis. Round-robin comparisons between measurements from each TDS were also performed using point-by-point dose difference, median dose difference, and the percent of point dose differences within 2% of the mean metrics., Results: All plans had more than 95% of points passing a gamma analysis using 3%/3 mm criteria with global normalization and a 20% threshold when comparing measurements to calculations. The tightest gamma analysis criteria where a plan still passed > 95% were similar across delivery systems-within 0.5%/0.5 mm for all but three plan/energy combinations. Median dose deviations in measurement-to-measurement comparisons were within 0.7% and 1.0% for global and local normalization, respectively. More than 90% of the point differences were within 2%., Conclusion: A set of plans spanning available energies and complexity levels were delivered by three matched TDSs. Comparisons to calculations and between measurements showed dose distributions delivered by each TDS using the same DICOM RT-plan file meet tolerances much smaller than typical clinical IMRT QA criteria. This demonstrates each TDS is modeled to a similar accuracy by a common class (shared) beam model. Additionally, it demonstrates that dose distributions from one TDS show small differences in median dose to the others. This is an important validation component of the common beam model approach, allowing for operational improvements in the clinic., (© 2024 The Author(s). Journal of Applied Clinical Medical Physics is published by Wiley Periodicals, Inc. on behalf of The American Association of Physicists in Medicine.)

This investigation aimed to optimize gradient positioning for radiochromic film calibration to facilitate a uniform distribution of calibration points. The study investigated the influence of various parameters on gradient dose profiles generated by a physical wedge, assessing their impact on the field's dose dynamic range, a scalar quantity representing the span of absorbed doses. Numerical parameterization of the physical wedge profile was used to visualize and quantify the impact of field size, depth, and energy on the dynamic range of dose gradients. This concept enabled the optimization of the gradient positioning and estimation of the necessary number of exposures for the desired calibration dose range. An optimization algorithm based on histogram bin height minimization was developed and presented. The maximum dynamic range was achieved with a 20 × $\times$ 20 cm 2 $\textrm {cm}^{2}$ field size at 5 cm depth. Optimization of wedge gradient positioning yielded the most uniform dose distribution with 7 exposures for the [1,10] Gy range and 8 exposures for the [1,20] Gy range. Film calibration using gradients centered at 1.6, 3, 3.5, and 7 Gy central axis (CAX), obtained through optimized gradient positioning, was showcased. The presented work demonstrates the potential for an improved film calibration process, with efficient material utilization and enhanced dosimetric accuracy for clinical applications. While the method was described for the use of a physical wedge, the methodology can be easily extended to the use of a more convenient dynamic wedge., (© 2024 The Author(s). Journal of Applied Clinical Medical Physics published by Wiley Periodicals LLC on behalf of American Association of Physicists in Medicine.)

Background and Purpose: Radiotherapy trial quality assurance (RT QA) is crucial for ensuring the safe and reliable delivery of radiotherapy trials, and minimizing inter-institutional variations. While previous studies focused on outlining and planning quality assurance (QA), this work explores the process of Image-Guided Radiotherapy (IGRT), and adaptive radiotherapy. This study presents findings from during-accrual QA in the RAIDER trial, evaluating concordance between online and offline plan selections for bladder cancer participants undergoing adaptive radiotherapy. RAIDER had two seamless stages; stage 1 assessed adherence to dose constraints of dose escalated radiotherapy (DART) and stage 2 assessed safety. The RT QA programme was updated from stage 1 to stage 2., Materials and Methods: Data from all participants in the adaptive arms (standard dose adaptive radiotherapy (SART) and DART) of the trial was requested (33 centres across the UK, Australia and New Zealand). Data collection spanned September 2015 to December 2022 and included the plans selected online, on Cone-Beam Computed Tomography (CBCT) data. Concordance with the plans selected offline by the independent RT QA central reviewer was evaluated., Results: Analysable data was received for 72 participants, giving a total of 884 CBCTs. The overall concordance rate was 83% (723/884). From stage 1 to stage 2 the concordance in the plans selected improved from 75% (369/495) to 91% (354/389)., Conclusion: During-accrual IGRT QA positively influenced plan selection concordance, highlighting the need for ongoing support when introducing a new technique. Overall, it contributes to advancing the understanding and implementation of QA measures in adaptive radiotherapy trials., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Robert Huddart reports grants received by their institution from Cancer Research UK, MSD and Roche, consultation fees from Janssen, Bristol Myers Squibb, Astellas, Roche and Nektar Pharmaceuticals, payment or honoraria from Roche, Bristol Myers Squibb and Merck, support for attending meetings and/or travel from MSD, Roche and Janssen, participation on a data safety monitoring board or advisory board for Biontech, Gilead and Merck and leadership or fiduciary role at Cancer Centre London, Parkside. Shaista Hafeez reports grants from NIHR Biomedical Research Centre at The Royal Marsden NHS Foundation Trust and The Institute of Cancer Research, non-financial support from Elekta (Stockholm, Sweden), personal fees and non-financial support from Roche, non-financial support from Merck Sharp & Dohme (MSD), outside the submitted work. EH reports non-financial support (study drug supplies) received by their institution from Astra-Zeneca and Bayer, outside the submitted work. EH also reports grants received by their institution from Cancer Research UK (within scope of submitted work and outside the submitted work) and Prostate Cancer UK (outside submitted work). Amanda Webster, Michael Francis, Hannah Gribble, Clare Griffin, Vibeke N Hansen, Rebecca Lewis, Helen McNair and Elizabeth Miles have no conflicts to declare, (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Purpose: We aimed to show the framework of the six-sigma methodology (SSM) that can be used to determine the limits of QC tests for the linear accelerator (Linac). Limits for QC tests are individually determined using the SSM., Methods and Materials: The SSM is based on the define-measure-analyze-improve-control (DMAIC) stages to improve the process. In the "define" stage, the limits of QC tests were determined. In the "measure" stage, a retrospective collection of daily QC data using a Machine Performance Check platform was performed from January 2020 to December 2022. In the "analyze" stage, the process of determining the limits was proposed using statistical analyses and process capability indices. In the "improve" stage, the capability index was used to calculate the action limits. The tolerance limit was established using the larger one of the control limits in the individual control chart (I-chart). In the "control" stage, daily QC data were collected prospectively from January 2023 to May 2023 to monitor the effect of action limits and tolerance limits., Results: A total of 798 sets of QC data including beam, isocenter, collimation, couch, and gantry tests were collected and analyzed. The Collimation Rotation offset test had the min-Cp, min-Cpk, min-Pp, and min-Ppk at 2.53, 1.99, 1.59, and 1.25, respectively. The Couch Rtn test had the max-Cp, max-Cpk, max-Pp, and max-Ppk at 31.5, 29.9, 23.4, and 22.2, respectively. There are three QC tests with higher action limits than the original tolerance. Some data on the I-chart of the beam output change, isocenter KV offset, and jaw X1 exceeded the lower tolerance and action limit, which indicated that a system deviation occurred and reminded the physicist to take action to improve the process., Conclusions: The SSM is an excellent framework to use in determining the limits of QC tests. The process capability index is an important parameter that provides quantitative information on determining the limits of QC tests., (© 2024 The Author(s). Journal of Applied Clinical Medical Physics published by Wiley Periodicals LLC on behalf of American Association of Physicists in Medicine.)

Evidence-based medicine drives patient care decision-making; thus, accurate and complete reporting in scientific publications is paramount. A checklist for complete reporting of veterinary radiation therapy was proposed in 2012 using the recommendations of the International Commission of Radiation Units and Measurements (ICRU). The purpose of this study is to review the 2012 checklist and propose updates based on changes in technology. Significant technology advancements have gained traction in veterinary medicine, including intensity-modulated radiation therapy (IMRT) and stereotactic radiation therapy (SRT), both of which have related modality-specific ICRU reporting recommendations. The 2012 checklist and proposed 2024 checklist are then used to assess the completeness of reporting in veterinary radiation oncology publications between 2015 and 2022, of which one hundred and eight publications met the inclusion criteria. Prior to the publication of the 2012 checklist (2005-2010), only nine checklist items showed a good level of completeness in reporting, and from 2015 to 2022, this increased to 16 items. Encouraging and/or requiring the use of reporting checklists at the time of manuscript submission may be responsible for this improvement in reporting. Using the 2024 checklist, which is more relevant to publications discussing IMRT and SRT treatments, only 14 of the analyzed checklist items (34%) show a good level of completeness in reporting, suggesting there is a need for updated guidelines to capture the nuances of advanced techniques. This study proposes a 2024 checklist that can be used as a guideline for future reporting of radiation therapy in veterinary medicine., (© 2024 The Author(s). Veterinary Radiology & Ultrasound published by Wiley Periodicals LLC on behalf of American College of Veterinary Radiology.)

Purpose: A higher minimum monitor unit (minMU) for pencil-beam scanning proton beams in intensity-modulated proton therapy is preferred for more efficient delivery. However, plan quality may be compromised when the minMU is too large. This study aimed to identify the optimal minMU (OminMU) to improve plan delivery efficiency while maintaining high plan quality., Methods: We utilized clinical plans including six anatomic sites (brain, head and neck, breast, lung, abdomen, and prostate) from 23 patients previously treated with the Varian ProBeam system. The minMU of each plan was increased from the current clinical minMU of 1.1 to 3-24 MU depending on the daily prescribed dose (DPD). The dosimetric parameters of the plans were evaluated for consistency against a 1.1-minMU plan for target coverage as well as organs-at-risk dose sparing. DPD/minMU was defined as the ratio of DPD to minMU (cGy/MU) to find the OminMU by ensuring that dosimetric parameters did not differ by >1% compared to those of the 1.1-minMU plan., Results: All plans up to 5 minMU showed no significant dose differences compared to the 1.1-minMU plan. Plan qualities remained acceptable when DPD/minMU ≥35 cGy/MU. This suggests that the 35 cGy/MU criterion can be used as the OminMU, which implies that 5 MU is the OminMU for a conventional fraction dose of 180 cGy. Treatment times were decreased by an average of 32% (max 56%, min 7%) and by an average of 1.6 min when the minMU was increased from 1.1 to OminMU., Conclusion: A clinical guideline for OminMU has been established. The minMU can be increased by 1 MU for every 35 cGy of DPD without compromising plan quality for most cases analyzed in this study. Significant treatment time reduction of up to 56% was observed when the suggested OminMU is used., (© 2024 The Author(s). Journal of Applied Clinical Medical Physics published by Wiley Periodicals LLC on behalf of American Association of Physicists in Medicine.)

Background: Quality assurance (QA) for ultra-high dose rate (UHDR) irradiation is a crucial aspect in the emerging field of FLASH radiotherapy (FLASH-RT). This innovative treatment approach delivers radiation at UHDR, demanding careful adoption of QA protocols and procedures. A comprehensive understanding of beam properties and dosimetry consistency is vital to ensure the safe and effective delivery of FLASH-RT., Purpose: To develop a comprehensive pre-treatment QA program for cyclotron-based proton pencil beam scanning (PBS) FLASH-RT. Establish appropriate tolerances for QA items based on this study's outcomes and TG-224 recommendations., Methods: A 250 MeV proton spot pattern was designed and implemented using UHDR with a 215nA nozzle beam current. The QA pattern that covers a central uniform field area, various spot spacings, spot delivery modes and scanning directions, and enabling the assessment of absolute, relative and temporal dosimetry QA parameters. A strip ionization chamber array (SICA) and an Advanced Markus chamber were utilized in conjunction with a 2 cm polyethylene slab and a range (R 80 ) verification wedge. The data have been monitored for over 3 months., Results: The relative dosimetries were compliant with TG-224. The variations of temporal dosimetry for scanning speed, spot dwell time, and spot transition time were within ± 1 mm/ms, ± 0.2 ms, and ± 0.2 ms, respectively. While the beam-to-beam absolute output on the same day reached up to 2.14%, the day-to-day variation was as high as 9.69%. High correlation between the absolute dose and dose rate fluctuations were identified. The dose rate of the central 5 × 5 cm 2 field exhibited variations within 5% of the baseline value (155 Gy/s) during an experimental session., Conclusions: A comprehensive QA program for FLASH-RT was developed and effectively assesses the performance of a UHDR delivery system. Establishing tolerances to unify standards and offering direction for future advancements in the evolving FLASH-RT field., (© 2024 The Author(s). Journal of Applied Clinical Medical Physics published by Wiley Periodicals LLC on behalf of American Association of Physicists in Medicine.)

As a component of myeloablative conditioning before allogeneic hematopoietic stem cell transplantation (HSCT), Total Body Irradiation (TBI) is employed in radiotherapy centers all over the world. In recent and coming years, many centers are changing their technical setup from a conventional TBI technique to multi-isocenter conformal arc therapy techniques such as Volumetric Modulated Arc Therapy (VMAT) or Helical Tomotherapy (HT). These techniques allow better homogeneity and control of the target prescription dose, and provide more freedom for individualized organ-at-risk sparing. The technical design of multi-isocenter/multi-plan conformal TBI is complex and should be developed carefully. A group of early adopters with conformal TBI experience using different treatment machines and treatment planning systems came together to develop technical recommendations and share experiences, in order to assist departments wishing to implement conformal TBI, and to provide ideas for standardization of practices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Purpose: To demonstrate the impact of implementing hypofractionated prescription regimens and advanced treatment techniques on institutional operational hours and radiotherapy personnel resources in a multi-institutional setting. The study may be used to describe the impact of advancing the standard of care with modern radiotherapy techniques on patient and staff resources., Methods: This study uses radiation therapy data extracted from the radiotherapy information system from two tertiary care, university-affiliated cancer centers from 2012 to 2021. Across all patients in the analysis, the average fraction number for curative and palliative patients was reported each year in the decade. Also, the institutional operational treatment hours are reported for both centers. A sub-analysis for curative intent breast and lung radiotherapy patients was performed to contextualize the impact of changes to imaging, motion management, and treatment technique., Results: From 2012 to 2021, Center 1 had 42 214 patient plans and Center 2 had 43 252 patient plans included in the analysis. Averaged over both centers across the decade, the average fraction number per patient decreased from 6.9 to 5.2 (25%) and 21.8 to 17.2 (21%) for palliative and curative patients, respectively. The operational treatment hours for both institutions increased from 8 h 15 min to 9 h 45 min (18%), despite a patient population increase of 45%., Conclusion: The clinical implementation of hypofractionated treatment regimens has successfully reduced the radiotherapy workload and operational treatment hours required to treat patients. This analysis describes the impact of changes to the standard of care on institutional resources., (© 2024 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals LLC on behalf of American Association of Physicists in Medicine.)

Introduction: Daily quality assurance is an integral part of a radiotherapy workflow to ensure the dose is delivered safely and accurately to the patient. It is performed before the first treatment of the day and needs to be time and cost efficient for a multiple gantries proton center. In this study, we introduced an efficient method to perform QA for output constancy, range verification, spot positioning accuracy and imaging and proton beam isocenter coincidence with DailyQA3., Methods: A stepped acrylic block of specific dimensions is fabricated and placed on top of the DailyQA3 device. Treatment plans comprising of two different spread-out Bragg peaks and five individual spots of 1.0 MU each are designed to be delivered to the device. A mathematical framework to measure the 2D distance between the detectors and individual spot is introduced and play an important role in realizing the spot positioning and centering QA. Lastly, a 5 months trends of the QA for two gantries are presented., Results: The outputs are monitored by two ion chambers in the DailyQA3 and a tolerance of ± 3 % $ \pm 3\% $ are used. The range of the SOBPs are monitored by the ratio of ion chamber signals and a tolerance of ± 1 mm $ \pm 1\ {\mathrm{mm}}$ is used. Four diodes at ± 10 cm $ \pm 10\ {\mathrm{cm}}$ from the central ion chambers are used for spot positioning QA, while the central ion chamber is used for imaging and proton beam isocenter coincidence QA. Using the framework, we determined the absolute signal threshold corresponding to the offset tolerance between the individual proton spot and the detector. A 1.5 mm $1.5\ {\mathrm{mm}}$ tolerances are used for both the positioning and centering QA. No violation of the tolerances is observed in the 5 months trends for both gantries., Conclusion: With the proposed approach, we can perform four QA items in the TG224 within 10 min., (© 2024 The Authors. Journal of Applied Clinical Medical Physics is published by Wiley Periodicals, Inc. on behalf of The American Association of Physicists in Medicine.)

Purpose: This study aimed to improve the safety and accuracy of radiotherapy by establishing tolerance (TL) and action (AL) limits for the gamma index in patient-specific quality assurance (PSQA) for intensity-modulated radiation therapy (IMRT) and volumetric-modulated arc therapy (VMAT) using SunCHECK software, as per AAPM TG-218 report recommendations., Methods: The study included 125 patients divided into six groups by treatment regions (H&N, thoracic and pelvic) and techniques (VMAT, IMRT). SunCHECK was used to calculate the gamma passing rate (%GP) and dose error (%DE) for each patient, for the planning target volume and organs at risk (OARs). The TL and AL were then determined for each group according to TG-218 recommendations. We conducted a comprehensive analysis to compare %DE among different groups and examined the relationship between %GP and %DE., Results: The TL and AL of all groups were more stringent than the common standard as defined by the TG218 report. The TL and AL values of the groups differed significantly, and the values for the thoracic groups were lower for both VMAT and IMRT. The %DE of the parameters D 95% , D 90% , and D mean in the planning target volume, and D mean and D max in OARs were significantly different. The dose deviation of VMAT was larger than IMRT, especially in the thoracic group. A %GP and %DE correlation analysis showed a strong correlation for the planning target volume, but a weak correlation for the OARs. Additionally, a significant correlation existed between %GP of SunCHECK and Delta4., Conclusion: The study established TL and AL values tailored to various anatomical regions and treatment techniques at our institution. Establishing PSQA workflows for VMAT and IMRT offers valuable clinical insights and guidance. We also suggest developing a standard combining clinically relevant metrics with %GP to evaluate PSQA results comprehensively., (© 2024 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals LLC on behalf of American Association of Physicists in Medicine.)

Aim: To assess the precision of dose calculations for Volumetric Modulated Arc Therapy (VMAT) using megavoltage (MV) photon beams, we validated the accuracy of two algorithms: AUROS XB and Analytical Anisotropic Algorithm (AAA). This validation will encompass both flattening filter (FF) and flattening filter-free beam (FFF) modes, using AAPM Medical Physics Practice Guideline (MPPG 5b)., Materials and Methods: VMAT validation tests were generated for 6 MV FF and 6 MV FFF beams using the AAA and AXB algorithms in the Eclipse V.15.1 treatment planning system (TPS). Corresponding measurements were performed on a linear accelerator using a diode detector and a radiation field analyzer. Point dose (PD) and in-vivo measurements were conducted using an A1SL ion chamber and (TLD) from Thermofisher, respectively. The Rando Phantom was employed for end-to-end (E2E) tests., Results: The mean difference (MD) between the TPS-calculated values and the measured values for the PDD and output factors were within 1% and 0.5%, respectively, for both 6 MV FF and 6 MV FFF. In the TG 119 sets, the MD for PD with both AAA and AXB was <0.9%. For the TG 244 sets, the minimum, maximum, and mean deviations in PD for both 6 MV FF and 6 MV FFF beams were 0.3%, 1.4% and 0.8% respectively. In the E2E test, using the Rando Phantom, the MD between the TLD dose and the TPS dose was within 0.08% for both 6 MV FF (p=1.0) and 6 MV FFF (0.018) beams., Conclusion: The accuracy of the TPS and its algorithms (AAA and AXB) has been successfully validated. The recommended tests included in the VMAT/IMRT validation section proved invaluable for verifying the PDD, output factors, and the feasibility of complex clinical cases. E2E tests were instrumental in validating the entire workflow from CT simulation to treatment delivery.

Background: Craniospinal irradiation (CSI) poses a challenge to treatment planning due to the large target, field junction, and multiple organs at risk (OARs) involved. The aim of this study was to evaluate the performance of knowledge-based planning (KBP) in CSI by comparing original manual plans (MP), KBP RapidPlan initial plans (RP I ), and KBP RapidPlan final plans (RP F ), which received further re-optimization to meet the dose constraints., Patients and Methods: Dose distributions in the target were evaluated in terms of coverage, mean dose, conformity index (CI), and homogeneity index (HI). The dosimetric results of OARs, planning time, and monitor unit (MU) were evaluated., Results: All MP and RP F plans met the plan goals, and 89.36% of RP I plans met the plan goals. The Wilcoxon tests showed comparable target coverage, CI, and HI for the MP and RP F groups; however, worst plan quality was demonstrated in the RP I plans than in MP and RP F . For the OARs, RP F and RP I groups had better dosimetric results than the MP group ( P < 0.05 for optic nerves, eyes, parotid glands, and heart). The planning time was significantly reduced by the KBP from an average of 677.80 min in MP to 227.66 min ( P < 0.05) and 307.76 min ( P < 0.05) in RP I , and RP F , respectively. MU was not significantly different between these three groups., Conclusions: The KBP can significantly reduce planning time in CSI. Manual re-optimization after the initial KBP is recommended to enhance the plan quality., (© 2024 Wei-Ta Tsai et al., published by Sciendo.)

Background: The error magnitude is closely related to patient-specific dosimetry and plays an important role in evaluating the delivery of the radiotherapy plan in QA. No previous study has investigated the feasibility of deep learning to predict error magnitude., Objective: The purpose of this study was to predict the error magnitude of different delivery error types in radiotherapy based on ResNet., Methods: A total of 34 chest cancer plans (172 fields) of intensity-modulated radiation therapy (IMRT) from Eclipse were selected, of which 30 plans (151 fields) were used for model training and validation, and 4 plans including 21 fields were used for external testing. The collimator misalignment (COLL), monitor unit variation (MU), random multi-leaf collimator shift (MLCR), and systematic MLC shift (MLCS) were introduced. These dose distributions of portal dose predictions for the original plans were defined as the reference dose distribution (RDD), while those for the error-introduced plans were defined as the error-introduced dose distribution (EDD). Different inputs were used in the ResNet for predicting the error magnitude., Results: In the test set, the accuracy of error type prediction based on the dose difference, gamma distribution, and RDD + EDD was 98.36%, 98.91%, and 100%, respectively; the root mean squared error (RMSE) was 1.45-1.54, 0.58-0.90, 0.32-0.36, and 0.15-0.24; the mean absolute error (MAE) was 1.06-1.18, 0.32-0.78, 0.25-0.27, and 0.11-0.18, respectively, for COLL, MU, MLCR and MLCS., Conclusions: In this study, error magnitude prediction models with dose difference, gamma distribution, and RDD + EDD are established based on ResNet. The accurate prediction of the error magnitude under different error types can provide reference for error analysis in patient-specific QA.