Search

A comprehensive quantitative root cause study of defect evolution leading to memory window closure from a charge balance and charge trapping perspective throughout all phases of a Si channel Hf0.5Zr0.5O2 (HZO) ferroelectric field-effect-transistor (FEFET) is reported. Starting with the first write pulse, an excessive SiO2 interlayer field is revealed that triggers the creation of defect levels Dit in excess of 1015 cm−2 eV−1 at the HZO–SiO2 interface screening ferroelectric (FE) polarization while enabling FE switching. Under subsequent early bipolar fatigue cycling (up to 104 cycles), defect creation commences at the SiO2–Si interface due to the high injected hole fluence (0.39 C/m2) during each stress pulse causing negative bias instability (NBI), which shifts the threshold voltage of the erase state VT,ERS by −0.3 V with accrual of permanently captured charge Nit of up to +5 × 10−3 C/m2 (3 × 1012 cm−2). Subsequently, Nit NBI generation at the SiO2–Si interface accelerates reaching levels of +7 × 10−2 C/m2, locking both FEFET program and erase drain current vs gate–source-voltage (ID–VGS) characteristics in the FEFET on-state inducing memory window closure at 105 cycles while FE switching (switched polarization Psw = 0.34 C/m2) remains essentially intact. These findings guide the down-selection toward suitable semiconductor/FE systems for charge balanced, reliable, and high endurance FEFETs. [ABSTRACT FROM AUTHOR]

In this article, a 0.7 nm thick monolayer MoS2 nanosheet gate-all-around field effect transistors (NS-GAAFETs) with conformal high- κ metal gate deposition are demonstrated. The device with 40 nm channel length exhibits a high on-state current density of ~410 μ A μ m−1 with a large on/off ratio of 6 × 108 at drain voltage = 1 V. The extracted contact resistance is 0.48 ± 0.1 kΩ μ m in monolayer MoS2 NS-GAAFETs, thereby showing the channel-dominated performance with the channel length scaling from 80 to 40 nm. The successful demonstration of device performance in this work verifies the integration potential of transition metal dichalcogenides for future logic transistor applications. [ABSTRACT FROM AUTHOR]

Carbon nanotube (CNT) field effect transistors (CNFETs) show promise for the next generation VLSI systems due to their excellent scalability, energy efficiency, and speed. However, high leakage current is a drawback of large diameter CNTs (diameter (DCNT) ≥ 1.4 nm) due to the small electronic band gap (EG) ≤ 0.6 eV and effective mass. This work investigates the on‐current and off‐current tradeoff for two populations of semiconducting‐enriched CNT with DCNT ≈ 1.0 nm displaying a simultaneous 50x improvement in minimun current (IMIN) with 2.5x degradation in contact resistance compared to DCNT ≈ 1.4 nm using a Pd side‐bonded contact. A method to enhance the performance of low‐leakage CNFETs is demonstrated using sub‐monolayer self‐aligned contact doping with 0.8 nm of MoOX, which delivers a 57% reduction in contact resistance to DCNT ≈ 1.0 nm. Robustness is verified after annealing at 200 °C for 30 min and monitoring stability across 6 months post‐fabrication with no change in electrical behaviors. [ABSTRACT FROM AUTHOR]

Semiconducting single‐walled carbon nanotube (CNT) is a promising candidate as a channel material for advanced logic transistors, attributed to the ultra‐thin 1‐nm cylindrical geometry, high mobility, and high carrier injection velocity. However, the presence of undesired CNT bundles in the CNT arrays for wafer‐scale device fabrication, even when utilizing the state‐of‐the‐art dimension‐limited self‐alignment (DLSA) method, poses challenges. These CNT bundles degrade the transistor gate's efficiency in controlling the flow of charge carriers in the CNT channel, leading to pronounced device‐to‐device variability. Here, a novel method is introduced to alleviate bundling in CNT arrays assembled via DLSA, by involving small molecule additive to screen the attractive van der Waals force between neighboring CNTs during the DLSA process, resulting in over 50% reduction in CNT bundling. Furthermore, a pioneering methodology for quantifying CNT bundles is presented and employed experimentally to assess bundles in dense CNT arrays assembled by DLSA using transmission electron microscopy. Both experimental data and molecular dynamics simulation reveal that CNT bundling originates from van der Waals attraction between CNTs, and the disturbed liquid‐liquid interface by accumulating excess polar molecules. These findings illuminate new pathways for realizing dense, bundle‐free CNT arrays. [ABSTRACT FROM AUTHOR]

In this article, a 0.7 nm thick monolayer MoS 2 nanosheet gate-all-around field effect transistors (NS-GAAFETs) with conformal high- κ metal gate deposition are demonstrated. The device with 40 nm channel length exhibits a high on-state current density of ~410 μ A μ m -1 with a large on/off ratio of 6 × 10 8 at drain voltage = 1 V. The extracted contact resistance is 0.48 ± 0.1 kΩ μ m in monolayer MoS 2 NS-GAAFETs, thereby showing the channel-dominated performance with the channel length scaling from 80 to 40 nm. The successful demonstration of device performance in this work verifies the integration potential of transition metal dichalcogenides for future logic transistor applications., (© 2024 IOP Publishing Ltd.)