Search

In this study, magnetohydrodynamic cross fluid model is used to formulate the 2D boundary layer equations of fluid moving on the parabolic surface. The surface is assumed to be in vertical shape due to the convection. The underlying effects of viscous dissipation and chemical reaction are modeled to observe the transportation of heat and mass rate. To understand fluid behavior, the thermophysical properties are considered as variable because they have huge influence in food processing, viscometers, lubricants and various industrial works. The assumed geometry of fluid flows is similar in shape of bullet, submarine, aircraft and car's bonnet, namely paraboloid surface. The modeled equations of cross fluid with mentioned effects are obtained in form of PDEs and then converted these equations in form of ODEs by assuming set of scaling transformations. For the sake of numerical and graphical outcomes, the resulting equations are solved numerically on Matlab software via BVP4c method. Results achieved across velocity indicate that the decay happens by numerous values of Weissenberg number, power law index, viscosity parameter and Hartmann number. The temperature and concentration fields attained increasing influence by thermal conductivity coefficient, Eckert number and thermal diffusivity parameter. [ABSTRACT FROM AUTHOR]

In the present analysis, tangent hyperbolic fluid is assumed to be flowing over a stretching cylinder. The thermophysical characteristics of fluids are assumed to be variable. The thermal and solutal rates are investigated by using viscous dissipation, activation energy, and thermal radiation. The governing equations occur in the form of partial differential equations, and then these equations are transformed into ordinary differential equations by using similarity transformations. Then, by using the BVP4C method, we obtain the numerical solution to the equations. The impacts of the involved parameters, such as Prandtl, Weissenberg, Schmidt, Eckert number, viscosity coefficient, and thermal radiation parameters, are presented through the graphs. The velocity profile decreases due to the power law index, Weissenberg number, and temperature-dependent viscosity. However, it increases due to the Darcy-Forchheimer number and curvature parameter. The temperature distribution rises with the Eckert number, curvature parameter, and radiation parameter. On the other hand, it declined for the Prandtl number and power law index. Similarly, the concentration profile increases for the activation energy, reaction rate, and temperature difference parameter, but it decreases for the curvature parameter and Schmidt number. • Darcy-Forchheimer and temperature dependent viscosity of tangent hyperbolic fluid. • Viscous dissipation, activation enrgy and thermal radiation is assumed. • The MATLAB programme is used to graphically analyze the behavior. • Stretching cylinder is considered. [ABSTRACT FROM AUTHOR]

AbstractIn the present work, the author used a multistep numerical approach, namely the Milne (Predictor and Corrector) method with the Runge-Kutta method, to discuss the synergistic impacts of magnetohydrodynamic (MHD) and stagnation point flow involving a tangent hyperbolic fluid on the surface of a stretched cylinder. The flow field study is constructed with the impact of heat source/sink, chemically reactive species, and the joule heating effect. The phenomenon of concentration and temperature stratification is also taken into account. The Soret and Dufour effects are used to determine the solutal and thermal performance. To create a mathematical model of a physical occurrence, momentum, energy, and concentration laws are employed. The appropriate transformations can be used to convert nonlinear partial differential equations into ordinary differential equations. The Milne (Predictor-Corrector) method along with the Runge-Kutta 4th order scheme is used to determine the numerical findings. The graphical and numerical findings are depicted to show how several parameters influence the respective fields. The finding indicates that the velocity of fluid reduces by making variation in the Hartmann number whereas the temperature region enhances due to Hartmann number. The movement of fluid increases when the stretching ratio parameter is higher but decreases when the Weissenberg number and curvature parameter are higher. The Soret number reduces the concentration region and Dufour number enhances the temperature profile. The temperature distribution rises with higher inputs of the heat source but declines for the heat sink constrain and thermal stratification coefficient. Similarly, the concentration region upsurges for the stretching ratio parameter, while it decreases for the chemical reaction rate and solutal stratification. [ABSTRACT FROM AUTHOR]

This work dealing to solve the numerical results of magnetohydrodynamic flow material (Casson fluid) moving over the slender parabolic surface with temperature dependent viscosity. To make the enhancement in the thermal and solutal fields, we have determined the impact of thermal radiation, viscous dissipation, joule heating, and chemical reaction on the considered flow material. Due to huge applications in coating processes and aerodynamic industries, the suction/Injection is assumed at the surface. With the help of assumed assumptions, the governing equations are obtained in partial differential equation forms, and these equations are translated into ordinary differential equations form by using the Levy‐Lee similarity transformations. The translated forms of ODE's are then numerically solved by using the Adams‐Milne (Predictor–Corrector) technique. The graphical and numerical findings are determined by producing the emerging parameters. The decrement in velocity is noted due to fluid parameter and suction coefficient whereas the enhancement happens due to natural convection. The numerical determination of physical quantities including, Nusselt number, Skin friction and Sherwood number are also examined here and compared the findings with two numerical techniques (Adam‐Milnes and Bvp4c method). [ABSTRACT FROM AUTHOR]

The aim of this work is to present a natural convective and squeezing flow model of two-dimensional couple stress nanofluid which is flowing on the sensory surface with variable fluid viscosity. The fluid flowing on a microcantilever sensory surface and squeezing is happening at free stream. The sensor is also useful to detect the movement of fluid and the variations in thermal and solutal rates. The Cattaneo–Christov model is adopted along with nanoparticle and chemical reaction to explore the transmission of heat and mass rates. The analysis of heat transmission in non-Newtonian couple stress fluid flowing on squeezed sensory surface by using the Cattaneo–Christov heat conduction model has various industrial and scientific applications including the polymer processing, wastewater treatment, chemical reactors, biomedical flows, cooling and heating processes in industries, heat exchangers, microfluidics, oil and gas industries. All the assumptions are applied in the basic governing laws laws and then we get the model of the partial differential equations. The governing model of equations is transmuted into ordinary differential equations form via the transformations and then the numerical results of these ODE’s are examined with a well-defined numerical technique “Shooting Method”. For higher inputs of couple stress, squeezing index and permeability velocity, the fluid’s internal velocity decreases. Because of the Prandtl number and thermal relaxation coefficient, the heat transfer mechanism slows down. Mass transfer increases for greater inputs of the thermal diffusivity coefficient and decreases due to concentration relaxation. Further, the numerical dependency of emerging parameters on the skin friction is illustrated in tabular form. The parametric effects on the model (velocity, temperature and concentration) are introduced using numerical values shown in the table. [ABSTRACT FROM AUTHOR]

The analysis of non-Newtonian fluid flow over an oscillating surface often involves numerical simulations and experimental investigations. Computational fluid dynamics method including finite difference or finite element techniques can be used to crack the governing equations of the fluid flow. In this work, we used the Crank–Nicolson numerical technique to analyze the numerical behavior of unsteady boundary layer flow of Casson fluid with natural convection past an oscillating vertical plate. The temperature-dependent viscosity is assumed for the flow analysis. The impact of chemical reaction and heat generation coefficient is used to examine the mass and heat transferal rates. The investigation of non-Newtonian fluid flow over an oscillating surface is crucial for a wide range of industrial, biomedical, and scientific applications. The governing model of equations occurs in the form of nondimensional PDEs and then we use the dimensionless variables in order to achieve the dimensional PDEs. These equations are numerically solved by using the Crank–Nicolson technique. The Crank–Nicolson scheme is used because it has the ability to provide accurate and stable solutions and make it a valuable numerical technique in various scientific and engineering disciplines. The findings indicate the significance of numerous parameters on the mass, velocity and energy regions. The numerical outcomes of skin friction are observed due to fluid parameter, viscosity parameter, Grashof numbers of heat and solutal rates. [ABSTRACT FROM AUTHOR]

The peristaltic transport of Carreau-Yasuda fluid model over a sinusoidal medium of non-Newtonian nano flow is examined. In this analysis, the channel walls are considered as ciliated with the higher and lower walls. The formulation of the 2D fluid model depends on the nonlinear (PDEs) that are transformed into simple ordinary (ODEs) by applying the dimensionless parameters and long-wavelength approximation. The numerical solution of the 2D system is taken out by applying the MATHEMATICA solver NDSolve function. The impact of various parameters, such as, flow rate parameter F , wave-length number δ , Brownian motion number N b , thermophoresis number N t , and account of eccentricity α on the velocity profile, temperature distribution, and concentration distribution and stream function are addressed with graphs. [ABSTRACT FROM AUTHOR]

The present approach aims to describe the Soret and Dufour effects on the peristaltic flow of heat and mass transfer for two-dimensional tangent hyperbolic fluid model having cilia walls and electro-osmotic phenomenon in an asymmetric channel. To construct the governing equations, this model employs the long wavelength and low Reynolds number approach. The peristaltic phenomenon due to pressure with electro-osmotic flow have been developed. The flow also comprises of heat and mass rate and this phenomenon have been investigated along with viscous dissipation. The impacts of relevant variables on the velocity, temperature and concentration have been examined by using the graphical results in MATHEMATICA. Overall, the objectives of this work involve a comprehensive investigation of the complex interplay between various physical effects and fluid behavior within an asymmetric channel. This research aims to provide insights into the behavior of the system and its potential applications, especially in fields like microfluidics, biotechnology or materials science. [ABSTRACT FROM AUTHOR]