Search

Soil organic matter and pores distribution within aggregates were studied using X-ray computed tomography (XCT; Nikon XT H 225ST and GE Phoenix L240) and advanced 2D/3D measurements by the digital Keyence VHX-6000 microscope (Japan). A new methodological approach with computed tomography involvement for studying the spatial arrangement of pores, porosity, and soil morphology is presented. Changes in studied parameters are documented along the transect of intensively used Haplic Chernozem. Soil disturbance due to erosion and colluvial soil profile formation is reported. Moreover, soil organic matter quality and aggregate stability were evaluated. Obtained results showed statistically significant differences between the control and eroded sites and between eroded and accumulated sites. The correlation coefficients were the highest for soil organic carbon (SOC) and humic substances CHS (r = 0.805) and CHS and CHA/CFA (r = 0.764). The highest porosity, aggregates stability and coefficients stability were confirmed on the eroded site. The computed tomography measurements also document the high disturbance of Haplic Chernozem on the control site and the newly formed profile of Colluvisol. Despite excellent complementary technique further research is necessary to improve micro-XCT resolution and capacity for the soil micromorphological study.

BackgroundOver the past 25 years, the development of multiuser applications has seen considerable advancements and challenges. The technological development in this field has emerged from simple chat rooms through videoconferencing tools to the creation of complex, interactive, and often multisensory virtual worlds. These multiuser technologies have gradually found their way into mental health care, where they are used in both dyadic counseling and group interventions. However, some limitations in hardware capabilities, user experience designs, and scalability may have hindered the effectiveness of these applications. ObjectiveThis systematic review aims at summarizing the progress made and the potential future directions in this field while evaluating various factors and perspectives relevant to remote multiuser interventions. MethodsThe systematic review was performed based on a Web of Science and PubMed database search covering articles in English, published from January 1999 to March 2024, related to multiuser mental health interventions. Several inclusion and exclusion criteria were determined before and during the records screening process, which was performed in several steps. ResultsWe identified 49 records exploring multiuser applications in mental health care, ranging from text-based interventions to interventions set in fully immersive environments. The number of publications exploring this topic has been growing since 2015, with a large increase during the COVID-19 pandemic. Most digital interventions were delivered in the form of videoconferencing, with only a few implementing immersive environments. The studies used professional or peer-supported group interventions or a combination of both approaches. The research studies targeted diverse groups and topics, from nursing mothers to psychiatric disorders or various minority groups. Most group sessions occurred weekly, or in the case of the peer-support groups, often with a flexible schedule. ConclusionsWe identified many benefits to multiuser digital interventions for mental health care. These approaches provide distributed, always available, and affordable peer support that can be used to deliver necessary help to people living outside of areas where in-person interventions are easily available. While immersive virtual environments have become a common tool in many areas of psychiatric care, such as exposure therapy, our results suggest that this technology in multiuser settings is still in its early stages. Most identified studies investigated mainstream technologies, such as videoconferencing or text-based support, substituting the immersive experience for convenience and ease of use. While many studies discuss useful features of virtual environments in group interventions, such as anonymity or stronger engagement with the group, we discuss persisting issues with these technologies, which currently prevent their full adoption.

High-entropy ceramic-based cermets represent a new and promising direction in improving the mechanical properties of conventional hardmetals through the formation of complex microstructures during synthesis. This has been systematically studied in two Co-free, high-entropy (Ti,Zr,Hf,Nb,Ta)C ceramic-based cermets using 10 wt% Ni and 10 wt% FeCrAl metallic binders during hot-press and spark plasma sintering. Fully densified microstructures were achieved in the temperature range of 1400–1500 °C, which is below the melting points of the pure Ni and FeCrAl alloy, owing to the liquid-phase assisted sintering. The optimal densification routes resulted in Vickers hardness (HV30) of 16.77 ± 0.72 and 18.32 ± 0.99 GPa, and fracture toughness (KIc_SENB) of 5.31 ± 0.41 and 4.83 ± 0.50 MPa m0.5, respectively for the Ni and FeCrAl bonded cermets. The improved damage tolerance of these cermets compared to the base (Ti,Zr,Hf,Nb,Ta)C high-entropy carbide is related to the reduced grain size and microstructural toughening mechanisms (e.g. crack deflection and bridging).

The new chiral ligands I–III based on derivatives of imidazolidin-4-one were synthesised and characterised. The catalytic activity and enantioselectivity of their corresponding copper(II) complexes were studied in asymmetric Henry reactions. It was found that the enantioselectivity of these catalysts is overall very high and depends on the relative configuration of the ligand used; cis-configuration of ligand affords the nitroaldols with major enantiomer S- (up to 97% ee), whereas the application of ligands with trans-configuration led to nitroaldols with major R-enantiomer (up to 96% ee). The “proline-type” ligand IV was also tested in asymmetric aldol reactions. Under the optimised reaction conditions, aldol products with enantioselectivities of up to 91% ee were obtained.

Background Inhaled corticosteroids have been widely reported as a preventive measure against the development of severe forms of COVID-19 not only in patients with asthma.Methods In 654 Czech and Slovak patients with asthma who developed COVID-19, we investigated whether the correct use of inhaler containing corticosteroids was associated with a less severe course of COVID-19 and whether this had an impact on the need for hospitalisation, measurable lung functions and quality of life (QoL).Results Of the studied cohort 51.4% had moderate persistent, 29.9% mild persistent and 7.2% severe persistent asthma. We found a significant adverse effect of poor inhaler adherence on COVID-19 severity (p=0.049). We also observed a lower hospitalisation rate in patients adequately taking the inhaler with OR of 0.83. Vital capacity and forced expiratory lung volume deterioration caused by COVID-19 were significantly reversed, by approximately twofold to threefold, in individuals who inhaled correctly.Conclusion Higher quality of inhalation technique of corticosteroids measured by adherence to an inhaled medication application technique (A-AppIT) score had a significant positive effect on reversal of the vital capacity and forced expiratory lung volume in 1 s worsening (p=0.027 and p

A novel negative-sense single-stranded RNA virus showing genetic similarity to viruses of the genus Rubodvirus has been found in raspberry plants in the Czech Republic and has tentatively been named raspberry rubodvirus 1 (RaRV1). Phylogenetic analysis confirmed its clustering within the group, albeit distantly related to other members. A screening of 679 plant and 168 arthropod samples from the Czech Republic and Norway revealed RaRV1 in 10 raspberry shrubs, one batch of Aphis idaei, and one individual of Orius minutus. Furthermore, a distinct isolate of this virus was found, sharing 95% amino acid identity in both the full nucleoprotein and partial sequence of the RNA-dependent RNA polymerase gene sequences, meeting the species demarcation criteria. This discovery marks the first reported instance of a rubodvirus infecting raspberry plants. Although transmission experiments under experimental conditions were unsuccessful, positive detection of the virus in some insects suggests their potential role as vectors for the virus.

Heracleum mantegazzianum is an invasive species in middle Europe. The mode of action of its invasiveness is still not known. Our study focuses on observation of potential allelopathic influence by the production and release of phytochemicals into its environment. Plant material was collected four times within one season (April, May, June, July 2019) at locality Lekárovce (eastern Slovakia) for comparison of differences in composition and potential allelopathy. Water extracts from collected samples were used for different biological assays. The total phenols and flavonoids were determined spectrophotometrically. The profile and content of phenolic components, including coumarins, were determined by two techniques of liquid chromatography along with in vitro evaluation of the free radical scavenging activity of extracts (DPPH, Hydroxyl, Superoxide, and FRAP). The changes in composition in extracts in different seasonal periods were evident as well as potential phytotoxic activity in some concentrations on specific model plants. The slight antioxidant activity was noted. The invasiveness of the current species could be supported by the excretion of its phytochemicals into its surroundings and by different modes of action influencing living organisms in its environment.

Quantum instruments describe outcome probability as well as state change induced by measurement of a quantum system. Incompatibility of two instruments, i. e. the impossibility to realize them simultaneously on a given quantum system, generalizes incompatibility of channels and incompatibility of positive operator-valued measures (POVMs). We derive implications of instrument compatibility for the induced POVMs and channels. We also study relation of instrument compatibility to the concept of non-disturbance. Finally, we prove equivalence between instrument compatibility and postprocessing of certain instruments, which we term complementary instruments. We illustrate our findings on examples of various classes of instruments.

In 2022/2023, Europe experienced its third consecutive season of high-pathogenicity avian influenza. During this period, the Czech Republic was again severely affected. For the first time, the number of culled birds approached one million, which was three times higher than in previous seasons. In parallel to the outbreaks in poultry, mass die-offs of gulls were also observed. In the present study, we performed whole-genome sequencing and phylogenetic analysis of 137 H5N1 strains collected in the Czech Republic in 2022/2023 (94.6% of all outbreaks or locations). The analysis revealed four distinct genotypes: AB, CH, BB and AF. Phylogenetic analysis suggested that the AF genotype persisted from the previous H5N1 season without reassortment. In addition, the genotype BB, which was detected mainly in gulls, showed a noticeable strain diversity at the local level. This virus was also responsible for a single outbreak in commercially bred turkeys. Finally, an interesting spatio-temporal cluster with three co-circulating H5N1 genotypes, AB, CH and AF, was identified with no evidence of intrasubtype reassortment. Highly sensitive molecular surveillance and the timely sharing of genomic sequences and associated metadata could greatly assist in tracking the spread and detecting molecular changes associated with the increased virulence of this potentially zoonotic pathogen.

Alumina (Al2O3) ceramics are interesting for low-weight and mid-high temperature applications. The addition of indium (In) and graphene nanoplatelets (GNPs) can be used to reduce the density and modify the functional properties and mechanical performance of the ceramic matrix. GNP and In-reinforced Al2O3 matrix composites were prepared by the spark plasma sintering (SPS) technique. Monolithic Al2O3 and Al2O3 matrix composites with either 5 or 10 wt.% of In and 2 wt.% of GNPs (Al2O3-5In-2GNPs and Al2O3-10In-2GNPs) were compacted into disc-shaped samples. The microstructure was studied and characterized with light-optical microscopy (LOM) and scanning electron microscopy (SEM). Hardness was determined using the Vickers technique and tribological properties were studied by the ball-on-disk method. The coefficient of friction (COF) and specific wear rates were evaluated from tribological tests. Worn surfaces were studied by SEM and confocal microscopy. Interdiffusion transition regions were formed among individual microstructural constituents (Al2O3, In, GNPs) under high sintering temperatures, which were responsible for the balanced hardness and low porosity of the produced composites. The addition of In and graphene nanoplatelets resulted in smaller COF and wear rates indicating good improvement in the tribological behavior. The prepared Al2O3-5In-2GNP and Al2O3-10In-2GNP composites represent promising nanocomposites for self-lubricating applications.

Despite the fundamental and technological importance of the elastic constants, a suitable method for their full characterization in epitaxial films is missing. Here we show that transient grating spectroscopy (TGS) with highly k-vector-selective generation and detection of acoustic waves is capable of determination of all independent elastic coefficients of an epitaxial thin film grown on a single-crystalline substrate. This experimental setup enables detection of various types of guided acoustic waves and evaluation of the directional dependence of their speeds of propagation. For the studied model system, which is a 3μm thin epitaxial film of the NiTi shape memory alloy on an MgO substrate, the TGS angular maps include Rayleigh-type surface acoustic waves as well as Sezawa-type and Love-type modes, delivering rich information on the elastic response of the film under different straining modes. The resulting inverse problem, which means the calculation of the elastic constants from the TGS maps, is subsequently solved using the Ritz-Rayleigh numerical method. Using this approach, tetragonal elastic constants of the NiTi film and their changes with the austenite→martensite phase transition are analyzed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)