Search

Black, brown, and white mustards are important spice and oil crops cultivated worldwide. In this study, the effect of mustard lines in terms of growth and yield under spring sown conditions during 2 years (2020 and 2021) was investigated under semi-arid climatic conditions in Ankara, Turkey. Fifteen lines and one standard were used in this study. The experiment was carried out according to the randomized block trial design with four replications. The results demonstrated statistically significant lines × years interaction for plant height, number of branches, number of capsules, number of seeds, thousand-seed weight, seed yield and crude oil yield of black, brown, and white mustard lines. The days to emergence, 4–6 leaves rosette stages, 50% flowering, 50% encapsulation, and harvest varied according to species and years. The better production year was 2021, when the highest seed yield (3080 kg ha−1) and oil yield (612 kg ha−1) were determined from the Brassica juncea-Bj3 line, while the lower production year was 2020, when the lowest seed yield (572 kg ha−1) and oil yield (133 kg ha−1) were detected for the B. nigra-Bn5 line. The B. juncea-Bj3 line for crude oil yield (612 kg ha−1) and the Sinapis alba-Sa5 line for seed yield (2282 kg ha−1) appeared to be superior in performance compared to the other lines and standards. The lines can be further exploited for breeding programs through selection and hybridization. Considering the yield data of the lines, it was detected that the lines of Brassica juncea, Sinapis alba and Brassica nigra have an important potential as a raw material resource for different industries. HIGHLIGHTS: The experimental results showed the agronomic potential of growing Brassica species under spring conditions. The yield characteristics of 15 Brassica lines were significantly affected by the environmental situation. The Brassica juncea-Bj3 and Sinapis alba-Sa2 lines were the superior lines and had a high potential for breeding new Brassica cultivars. [ABSTRACT FROM AUTHOR]

Sinapis alba genome has been utilized as a donor for abiotic and biotic stress tolerance, yet there seems to be a gap in exploring its potential contribution to yield-related traits. The greater number of lateral branches in Brassica plants provides new sites for bearing siliquae and emphasizes their profound impact on yield potential. The present investigation involves the morphological characterization of 94 backcross introgression lines (BCILs) over two consecutive crop seasons, coupled with genotyping by 277 S. alba genome-specific monoallelic microsatellite markers to decipher the genetic loci contributing to higher branching number traits. The results revealed significant QTLs governing primary (PB) and secondary branching (SB). In CS-I, two QTLs linked to PB collectively explained 46.50% of the phenotypic variance (PVE), exhibiting positive additive effects, signifying their contribution to increased branch numbers in BCILs. Two QTLs associated with SB were also identified, with LODs of 5.07 and 4.21 contributing 22.55 and 17.90%, respectively, to the PVE. During the CS-II, one QTL was identified for PB, explaining 28.04% of the PVE at a 20.97 LOD value, and one major QTL for SB was identified (27.52% of the PVE). Moreover, we also identified 40 potential genes within the QTL regions, with sixteen genes homologous to the ANT, MAX2, PNH, RAX2, SEU, CRE1, and RAMOSUS1 of Arabidopsis and pea, and a total of nine unknown genes with a role in branching that were introgressed from S. alba to B. juncea. This is the first study to identify introgressed candidate genes involved in Brassica branching. [ABSTRACT FROM AUTHOR]

In addressing the time-consuming and labor-intensive issues inherent in traditional marker selection mode including systematic isolation, structural elucidation, and activity screening of indicator components for a single traditional Chinese medicine (TCM), the aim of this study was to develop a method for quick simultaneous identification of multiple medicinal drugs by using high-performance thin-layer chromatography (HPTLC) technique featuring the advantages of being intuitive, easy to operate, and offering multi-dimensional information. Taking three TCMs originating from five closely related different species from Cruciferae family as an example, the study conducted parallel comparisons of optimized TLC chromatograms of seeds from the five species Lepidium apetalum, Descurainia sophia, Raphanus sativus, Sinapis alba, and Brassica juncea under different detection wavelength lights; eight characteristic components were distinctly discovered, and among them one known common constituent identified as sinapine. Subsequently, seven characteristic components were isolated on a small scale and within a short-time, and elucidated structurally. Lastly, for each seed, a combination of the common constituent and most of one of its characteristic components were chosen as identification markers for the respective seed. To sum up, a unified HPTLC method with different detection wavelengths and different marker combinations was established for the simultaneous identification of five seed-originated medicines. This research approach, characterized by simplicity, cost-effectiveness, and rapidity, presents a highly efficient alternative for establishing identification methods for chemically similar multiple TCMs from closely related species. [ABSTRACT FROM AUTHOR]

Polyurethanes (PUs) are a special class of polymeric materials that differ significantly from most other types of plastic in many aspects. They can be utilized in a wide range of products, including paints, coatings, elastomers, insulators, elastic fibers, and foams. PU foams are especially important as part of various convenience products. PU products often end up in landfills when they are no longer useful and can release toxic compounds when damaged by humans or microbes. Therefore, the ecotoxicological assessment of PU foams is essential. In this paper, five PU foam samples were prepared with different NCO indices (NCO-0.8, 0.9, 1.0, 1.1, and 1.2) and together with the Control sample (a previously tested non-toxic foam sample) were applied to develop toxicity tests procedure, while intentionally prepared Toxic foam has been used to verify the accuracy of the developed testing procedure. Two test organisms were successfully applied, Sinapis alba (white mustard) seeds and Escherichia coli (non-pathogenic) bacterial model organisms, and toxicity tests were adapted for the examination of PU-derived substances. Regarding Sinapis alba test, the highest NCO index (NCO-1.2) significantly reduced root length by 9.8 % compared to the Control sample. In the bacterial test, it was observed that the samples containing NCO-1.1 and NCO-1.2 had lower colony numbers (5.0 × 108 and 4.9 × 108 CFU/mL respectively) in comparison to the Control plate (9.6 × 108 CFU/mL). All in all, two toxicity tests were successfully adapted for PU foams, and both are applicable in their ecotoxicological assessment.

Traffic-related particulate matter emissions have been considerably reduced due to stringent regulations in Europe. However, emission of diesel-powered vehicles still poses a significant environmental threat, affecting rural ecosystems and agriculture. Several studies have reported that polycyclic aromatic hydrocarbons (PAHs), a group of potentially toxic organic compounds, can accumulate in crops and vegetables. In our study, white mustard (Sinapis alba L.) plants were experimentally treated with an extract of diesel exhaust. PAH concentrations were measured in the different plant compartments (stems, leaves and seeds), bioconcentration factors (BCFs) were also calculated. Significant accumulation was measured in the leaves and seeds, stems showed lower accumulation potential. All plant matrices showed high tendency to accumulate higher molecular weight PAHs, BCF was the highest in the 6-ring group. The fact that considerable accumulation was experienced in the seeds might show the risk of cultivating crops nearby roads highly impacted by traffic-related emissions. [ABSTRACT FROM AUTHOR]

BACKGROUND: Improving crop resistance to insect herbivores is a major research objective in breeding programs. Although genomic technologies have increased the speed at which large populations can be genotyped, breeding programs still suffer from phenotyping constraints. The pollen beetle (Brassicogethes aeneus) is a major pest of oilseed rape for which no resistant cultivar is available to date, but previous studies have highlighted the potential of white mustard as a source of resistance and introgression of this resistance appears to be a promising strategy. Here we present a phenotyping protocol allowing mid‐throughput (i.e., increased throughput compared to current methods) acquisition of resistance data, which could then be used for genetic mapping of QTLs. RESULTS: Contrasted white mustard genotypes were selected from an initial field screening and then evaluated for their resistance under controlled conditions using a standard phenotyping method on entire plants. We then upgraded this protocol for mid‐throughput phenotyping, by testing two alternative methods. We found that phenotyping on detached buds did not provide the same resistance contrasts as observed with the standard protocol, in contrast to the phenotyping protocol with miniaturized plants. This protocol was then tested on a large panel composed of hundreds of plants. A significant variation in resistance among genotypes was observed, which validates the large‐scale application of this new phenotyping protocol. CONCLUSION: The combination of this mid‐throughput phenotyping protocol and white mustard as a source of resistance against the pollen beetle offers a promising avenue for breeding programs aiming to improve oilseed rape resistance. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Abstract Background Iron oxide mineral–humic complexes serve as a reservoir of bioavailable Fe for plants, releasing metal ligands and providing Fe–humic complexes directly usable by plant Fe-uptake mechanisms. In this study, we synthesized and characterized goethite α-FeOOH (G) nanoparticles (NPs) intercalated in coal (GC) to estimate the bioactivity effect of humic acids (HA). The synthesized GC NPs were characterized by X-ray diffraction, scanning electron microscopy (SEM), Mössbauer spectroscopy, N2 adsorption–desorption Brunauer–Emmett–Teller (BET) specific surface area, zeta potential, hydrodynamic particle diameter, iron ions release, and a phytoassay method of root elongation using the higher plant Sinapis alba. Results X-ray diffraction revealed that G was the primary phase in both GC and GC–HA complexes. Mössbauer spectroscopy analysis identified a goethite-doped Fe2+-in the GC samples. The intercalation of G into the coal matrix increased the specific surface area of GC, enhancing its HA sorption capacity. In addition, GC–HA demonstrated superior plant growth stimulation compared to HA and GC alone, indicating its role in colloidal stability. In contrast to GC, GC–HA exhibited a more consistent and time-dependent release of Fe3+ and Fe2+. This sustained Fe release from GC–HA, coupled with the formation of Fe3+ and more bioavailable (soluble) Fe2+ humic complexes is a promising result in terms of iron nanofertilizers production. Conclusions The use of goethite nanoparticles intercalated within a coal matrix and subsequently complexed with HA contributes to prolonged phytoactivity by employing slowly released nutrient additives within the coal mesoporous matrix. Graphical Abstract

Alternaria blight is a devastating disease that causes significant crop losses in oilseed Brassicas every year. Adoption of conventional breeding to generate disease-resistant varieties has so far been unsuccessful due to the lack of suitable resistant source germplasms of cultivated Brassica spp. A thorough understanding of the molecular basis of resistance, as well as the identification of defense-related genes involved in resistance responses in closely related wild germplasms, would substantially aid in disease management. In the current study, a comparative transcriptome profiling was performed using Illumina based RNA-seq to detect differentially expressed genes (DEGs) specifically modulated in response to Alternaria brassicicola infection in resistant Sinapis alba, a close relative of Brassicas, and the highly susceptible Brassica rapa. The analysis revealed that, at 48 hpi (hours post inoculation), 3396 genes were upregulated and 23239 were downregulated, whereas at 72 hpi, 4023 genes were upregulated and 21116 were downregulated. Furthermore, a large number of defense response genes were detected to be specifically regulated as a result of Alternaria infection. The transcriptome data was validated using qPCR-based expression profiling for selected defense-related DEGs, that revealed significantly higher fold change in gene expression in S. alba when compared to B. rapa. Expression of most of the selected genes was elevated across all the time points under study with significantly higher expression towards the later time point of 72 hpi in the resistant germplasm. S. alba activates a stronger defense response reaction against the disease by deploying an array of genes and transcription factors involved in a wide range of biological processes such as pathogen recognition, signal transduction, cell wall modification, antioxidation, transcription regulation, etc. Overall, the study provides new insights on resistance of S. alba against A. brassicicola, which will aid in devising strategies for breeding resistant varieties of oilseed Brassica. [ABSTRACT FROM AUTHOR]

Alternaria blight is a devastating disease that causes significant crop losses in oilseed Brassicas every year. Adoption of conventional breeding to generate disease-resistant varieties has so far been unsuccessful due to the lack of suitable resistant source germplasms of cultivated Brassica spp. A thorough understanding of the molecular basis of resistance, as well as the identification of defense-related genes involved in resistance responses in closely related wild germplasms, would substantially aid in disease management. In the current study, a comparative transcriptome profiling was performed using Illumina based RNA-seq to detect differentially expressed genes (DEGs) specifically modulated in response to Alternaria brassicicola infection in resistant Sinapis alba, a close relative of Brassicas, and the highly susceptible Brassica rapa. The analysis revealed that, at 48 hpi (hours post inoculation), 3396 genes were upregulated and 23239 were downregulated, whereas at 72 hpi, 4023 genes were upregulated and 21116 were downregulated. Furthermore, a large number of defense response genes were detected to be specifically regulated as a result of Alternaria infection. The transcriptome data was validated using qPCR-based expression profiling for selected defense-related DEGs, that revealed significantly higher fold change in gene expression in S. alba when compared to B. rapa. Expression of most of the selected genes was elevated across all the time points under study with significantly higher expression towards the later time point of 72 hpi in the resistant germplasm. S. alba activates a stronger defense response reaction against the disease by deploying an array of genes and transcription factors involved in a wide range of biological processes such as pathogen recognition, signal transduction, cell wall modification, antioxidation, transcription regulation, etc. Overall, the study provides new insights on resistance of S. alba against A. brassicicola, which will aid in devising strategies for breeding resistant varieties of oilseed Brassica.

Polyurethanes (PUs) are a special class of polymeric materials that differ significantly from most other types of plastic in many aspects. They can be utilized in a wide range of products, including paints, coatings, elastomers, insulators, elastic fibers, and foams. PU foams are especially important as part of various convenience products. PU products often end up in landfills when they are no longer useful and can release toxic compounds when damaged by humans or microbes. Therefore, the ecotoxicological assessment of PU foams is essential. In this paper, five PU foam samples were prepared with different NCO indices (NCO-0.8, 0.9, 1.0, 1.1, and 1.2) and together with the Control sample (a previously tested non-toxic foam sample) were applied to develop toxicity tests procedure, while intentionally prepared Toxic foam has been used to verify the accuracy of the developed testing procedure. Two test organisms were successfully applied, Sinapis alba (white mustard) seeds and Escherichia coli (non-pathogenic) bacterial model organisms, and toxicity tests were adapted for the examination of PU-derived substances. Regarding Sinapis alba test, the highest NCO index (NCO-1.2) significantly reduced root length by 9.8 % compared to the Control sample. In the bacterial test, it was observed that the samples containing NCO-1.1 and NCO-1.2 had lower colony numbers (5.0 × 10 8 and 4.9 × 10 8  CFU/mL respectively) in comparison to the Control plate (9.6 × 10 8  CFU/mL). All in all, two toxicity tests were successfully adapted for PU foams, and both are applicable in their ecotoxicological assessment., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)