Search

2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) is one of the high-energy oxidants, but has limited application due to its high sensitivity. In this work, polyvinylidene fluoride (PVDF) was used as a co-oxidizer, which is expected to increase the safety of CL-20. One kind of novel graphene-based carbohydrazide complex (GCCo and GCNi) was employed to modify the properties of dual-oxidant CL-20@PVDF composites by the spray drying method and compared with traditional nanocarbon materials (CNTs and GO). The properties of these composites were investigated using the TGA/DSC technique and impact test. The results show that GCCo and GCNi could increase the activation energy (Ea) of CL-20@PVDF composites, and change the physical model of CL-20@PVDF, which followed the random chain scission model and then the first-order reaction model. In addition, these nanocarbon materials could reduce the impact sensitivity of CL-20@PVDF by their unique structure. Besides that, a dual-oxidant CL-20@PVDF system was used to improve the combustion property of Boron. GCCo and GCNi with the synergetic effect could increase the flame temperature and control the burn rate of CL-20@PVDF@B compared with CNTs and GO. The energetic nanocarbon catalyst-modified oxidant provides a facile method for stabilizing high-energy but sensitive materials to broaden their application. [ABSTRACT FROM AUTHOR]

Direct initiation of secondary explosives by a semiconductor laser is highly demanded, but it is challenging to exclude the use of sensitive primers. Most laser-sensitive energetic materials are usually mechanically sensitive. In order to reduce the mechanical sensitivity (MS) of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) while improving laser absorbance in the near-infrared band, spherical CL-20 composites (SCCs) embedded with nano aluminum (Al) powder and graphene-based catalyst (GO-CHZ-Co) were prepared by a spray drying method. These SCCs have been characterized comprehensively in terms of their morphologies, particle size distribution, laser absorbance, thermal decomposition behaviors, MS, and laser ignition properties. Results show that the maximum critical impact energy of SCCs was 3.8 J, which is 2.8 J higher than that of pristine ε-CL-20. The critical friction load was increased by at most 108 N compared to pristine CL-20. The absorbance has also been significantly increased up to almost 70% in the wavelength between 400 and 1400 nm, where the peak absorption is located in the region of 800-900 nm. In addition, the initial decomposition temperature ( T i ) of SCCs is lower than that of pure CL-20, especially in the presence of GO-CHZ-Co. The apparent activation energy ( E a ) for the decomposition of SCCs was largely dependent on the particle size of Al. Preliminary ignition tests indicate that the SCCs can be ignited successfully by a small-power laser.