Search

The hole‐transporting material (HTM), poly (3,4‐ethylene dioxythiophene) poly(styrene sulfonate) (PEDOT : PSS), is the most widely used material in the realization of high‐efficiency organic solar cells (OSCs). However, the stability of PEDOT : PSS‐based OSCs is quite poor, arising from its strong acidity and hygroscopicity. In addition, PEDOT : PSS has an absorption in the infrared region and high highest occupied molecular orbital (HOMO) energy level, thus limiting the enhancement of short‐circuit current density (Jsc) and open‐circuit voltage (Voc), respectively. Herein, two asymmetric self‐assembled molecules (SAMs), namely BrCz and BrBACz, were designed and synthesized as HTM in binary OSCs based on the well‐known system of PM6 : Y6, PM6 : eC9, PM6 : L8‐BO, and D18 : eC9. Compared with BrCz, BrBACz shows larger dipole moment, deeper work function and lower surface energy. Moreover, BrBACz not only enhances photon harvesting in the active layer, but also minimizes voltage losses as well as improves interface charge extraction/ transport. Consequently, the PM6 : eC9‐based binary OSC using BrBACz as HTM exhibits a champion efficiency of 19.70 % with a remarkable Jsc of 29.20 mA cm−2 and a Voc of 0.856 V, which is a record efficiency for binary OSCs so far. In addition, the unencapsulated device maintains 95.0 % of its original efficiency after 1,000 hours of storage at air ambient, indicating excellent long‐term stability. [ABSTRACT FROM AUTHOR]

Organic solar cells (OSCs) have attracted a great deal of attention in the field of clean solar energy due to their advantages of transparency, flexibility, low cost and light weight. Introducing them to the market enables seamless integration into buildings and windows, while also supporting wearable, portable electronics and internet-of-things (IoT) devices. With the development of photovoltaic materials and the optimization of fabrication technology, the power conversion efficiencies (PCEs) of OSCs have rapidly improved and now exceed 20%. However, there is a significant lack of focus on material stability and device lifetime, causing a severe hindrance to commercial applications. In this review, we carefully review important strategies employed to improve the stability of OSCs over the past three years from the perspectives of material design and device engineering. Furthermore, we analyze and discuss the current important progress in terms of air, light, thermal and mechanical stability. Finally, we propose the future research directions to overcome the challenges in achieving highly stable OSCs. We expect that this review will contribute to solving the stability problem of OSCs, eventually paving the way for commercial applications in the near future. [ABSTRACT FROM AUTHOR]

In recent years, the surface modification of perovskite by wide band‐gap insulating materials has been one of the main strategies to achieve efficient and stable perovskite solar cells (PSCs). Unfortunately, a significant hurdle in this approach is the dilemma surrounding the quality of passivation and the transport of charges. Here, this trade‐off is overcome by introducing self‐assembled diphenylphosphinic acid (DPPA) porous layer. Applying highly concentrated DPPA solution on the perovskite surface not only provides excellent passivation of entire surface, but also the excess DPPA will form a self‐assembled porous insulating layer (PIL), which forms random submicron‐sized openings at the interface of the insulating layer for accelerated charge transport. In addition, the energy level of the perovskite surface can be modulated by this insulating material to facilitate carrier transport. As a result, an impressive power conversion efficiency (PCE) over 24% has been achieved in methylammonium‐free p‐i‐n devices with an ultrahigh fill factor (FF) of 84.7%. The unencapsulated devices exhibit excellent thermal and operational stability. This work paves a way for establishment of an effective passivation and facilitated transport simultaneously. [ABSTRACT FROM AUTHOR]

Comprehensive Summary Inverted (p‐i‐n) perovskite solar cells (PSCs) are favored by researchers owing to their superior compatibility with flexible substrates and tandem device fabrication. Additionally, the hole transport layer (HTL) serves as a template for perovskite growth, which is critical for enhancing the device performance. However, the current research on how the HTL promotes perovskite crystallization is insufficient. Here, 4PADCB, a self‐assembled monolayer (SAM) hole transport material, was optimized as a superior template for perovskite growth through comparative analysis; accordingly, compact perovskite film with vertical growth was prepared. The better matched energy level alignment between 4PADCB and perovskite suppressed nonradiative recombination at the interface and enabled rapid hole extraction. Moreover, high‐quality perovskite film growth on 4PADCB exhibited lower Young's modulus and less residual stress. By integrating 4PADCB into p‐i‐n PSCs, the optimal device achieved a power conversion efficiency of 24.80%, with an open‐circuit voltage of 1.156 V, thus achieving the best rank among devices without perovskite post‐treatment, additives, dopants, or intermediate layers. Furthermore, the unencapsulated device demonstrated exceptional thermostability and photostability under maximum power point tracking. Thus, this work provides a new understanding for the development of novel SAMs and perovskite growth, and it is expected to further improve device performance. [ABSTRACT FROM AUTHOR]

The spatial differentiation of forest canopy branches and leaves affects rainfall interception. However, the scientific expression of the spatial differentiation of forest canopy branches and leaves has not been clarified, and revealing the effect of spatial differentiation of branches and leaves of the vertical structure of the forest canopy on rainfall interception is difficult. Using the Pinus massoniana planted in Changting County, China, as the research object, this study quantified the spatial differentiation of canopy branches and leaves in a hierarchical manner by combining the unmanned aerial vehicle (UAV) three-dimensional point cloud model with the landscape metrics and further simulated the interception mechanism of Pinus massoniana forest canopy on rainfall of different intensities by constructing the principal component regression model. The results showed that the spatial differentiation of canopy branches and leaves in different strata responds differently to different rainfall intensities. [ABSTRACT FROM AUTHOR]

The hole-transporting material (HTM), poly (3,4-ethylene dioxythiophene) poly(styrene sulfonate) (PEDOT : PSS), is the most widely used material in the realization of high-efficiency organic solar cells (OSCs). However, the stability of PEDOT : PSS-based OSCs is quite poor, arising from its strong acidity and hygroscopicity. In addition, PEDOT : PSS has an absorption in the infrared region and high highest occupied molecular orbital (HOMO) energy level, thus limiting the enhancement of short-circuit current density (J sc ) and open-circuit voltage (V oc ), respectively. Herein, two asymmetric self-assembled molecules (SAMs), namely BrCz and BrBACz, were designed and synthesized as HTM in binary OSCs based on the well-known system of PM6 : Y6, PM6 : eC9, PM6 : L8-BO, and D18 : eC9. Compared with BrCz, BrBACz shows larger dipole moment, deeper work function and lower surface energy. Moreover, BrBACz not only enhances photon harvesting in the active layer, but also minimizes voltage losses as well as improves interface charge extraction/ transport. Consequently, the PM6 : eC9-based binary OSC using BrBACz as HTM exhibits a champion efficiency of 19.70 % with a remarkable J sc of 29.20 mA cm -2 and a V oc of 0.856 V, which is a record efficiency for binary OSCs so far. In addition, the unencapsulated device maintains 95.0 % of its original efficiency after 1,000 hours of storage at air ambient, indicating excellent long-term stability., (© 2024 Wiley‐VCH GmbH.)

The main obstacles to promoting the commercialization of perovskite solar cells (PSCs) include their record power conversion efficiency (PCE), which still remains below the Shockley-Queisser limit, and poor long-term stability, attributable to crystallographic defects in perovskite films and open-circuit voltage (V oc ) loss in devices. In this study, potassium (4-tert-butoxycarbonylpiperazin-1-yl) methyl trifluoroborate (PTFBK) was employed as a multifunctional additive to target and modulate bulk perovskite defects and carrier dynamics of PSCs. Apart from simultaneously passivating anionic and cationic defects, PTFBK could also optimize the energy-level alignment of devices and weaken the interaction between carriers and longitudinal optical phonons, resulting in a carrier lifetime of greater than 3 μs. Furthermore, it inhibited non-radiative recombination and improved the crystallization capacity in the target perovskite film. Hence, the target rigid and flexible p-i-n PSCs yielded champion PCEs of 24.99 % and 23.48 %, respectively. More importantly, due to hydrogen bonding between formamidinium and fluorine, the target devices exhibited remarkable thermal, humidity, and operational tracking at maximum power point stabilities. The reduced Young's modulus and residual stress in the perovskite layer also provided excellent bending stability for flexible target devices., (© 2024 Wiley‐VCH GmbH.)

While significant advancements in power conversion efficiencies (PCEs) of α-FAPbI 3 perovskite solar cells (PSCs) have been made, attaining controllable perovskite crystallization is still a considerable hurdle. This challenge stems from the initial formation of δ-FAPbI 3 , a more energetically stable phase than the desired black α-phase, during film deposition. This disrupts the heterogeneous nucleation of α-FAPbI 3 , causing the formation of mixed phases and defects. To this end, polarity engineering using molecular additives, specifically ((methyl-sulfonyl)phenyl)ethylamines (MSPEs) are introduced. The findings reveal that the interaction of PbI 2 -MSPEs-FAI intermediates is enhanced with the increased polarity of MSPEs, which in turn expedites the nucleation of α-FAPbI 3 . This leads to the development of high-quality α-FAPbI 3 films, characterized by vertical crystal orientation and reduced residual stresses. Additionally, the increased dipole moment of MSPE at perovskite grain boundaries attenuates Coulomb attractions among charged defects and screens carrier capture process, thereby diminishing non-radiative recombination. Utilizing these mechanisms, PSCs treated with highly polar 2-(4-MSPE) achieve an impressive PCE of 25.2% in small-area devices and 20.5% in large-area perovskite solar modules (PSMs) with an active area of 70 cm 2 . These results demonstrate the effectiveness of this strategy in achieving controllable crystallization of α-FAPbI 3 , paving the way for scalable-production of high-efficiency PSMs., (© 2023 Wiley‐VCH GmbH.)