Search

In this study, a composite modifier (CMCDL) containing coal gasification residue, dicyandiamide waste slag, and lake sediments was used to modify steel slag at high-temperature. Five kind of raw materials was analyzed in physicochemical properties, mineral composition and microstructure, cementitious properties and soundness, and particle size analysis, the same to steel slag after high-temperature modification (SHTM). The new mineral phases were found that tricalcium aluminate (C3A), gehlenite (C2AS), magnetite (Fe3O4), spinels (MgFe2O4), quartz (SiO2), celite (C6AF2) and diopside (CMS2) formed in the SHTM when the mass fraction increase from 10% to 30% in CMCDL. The HTM with CMCDL increases the glass phase and hydrated mineral (C3A, C3S, C2S) and in raw steel slag, promoting the disassembled of RO phase, turning the phase from FeO into MgFe2O4 and Fe3O4. MgFe2O4 and Fe3O4 have similar crystal structures, and they form mixed spinels. When the content of CMCCL (coal gasification residue: dicyandiamide waste slag: lake sediments =7:9:4) is 20%, the temperature is 1250 °C, result showed that the mass fraction of f-CaO in SHTM using CMCCL decreases from 4.81% to 1.86%, with a decrease of 61.3%, the 28-day activity index of SHTM increases up to 17.6% compared with raw steel slag, reaching 86.2%. Therefore, the CMCDL-blended SHTM can be applied harmlessly in cement and concrete, enabling low-energy fine grinding of steel slag.

The microstructure and mechanical properties have a significant impact on the service performance of materials. This paper compared the microstructure and mechanical properties of 2024 aluminum alloy subjected to turning and ultrasonic surface rolling process (USRP). It was found that both turning and USRP can cause grain refinement and increased microhardness. The grain refinement induced by USRP was attributed to dislocation proliferation and T-phase fragmentation; At the same time, a quantitative relationship model between microhardness and microstructure during turning and USRP was constructed. The results showed that precipitation had the greatest impact on the microhardness induced by turning, while dislocations and grain refinement had the greatest impact on the microhardness induced by USRP; In addition, the mechanical performance response mechanism of the materials after turning and USRP was elucidated, and it was found that USRP can significantly enhance the yield strength of the materials.

The fatigue load that a material experiences and its microstructure are important factors influencing fatigue crack propagation behavior. This study employed laser scanning microscopy and electron backscatter diffraction (EBSD) technology, along with fatigue crack propagation experiments, to investigate the fatigue crack propagation behavior of 2024 aluminum alloy under varying stress ratios (R). The results showed that the stress amplitude (σp) was the main factor controlling the fatigue crack propagation life (N). Additionally, detailed characterization of the fatigue crack propagation path was conducted using crystal models and EBSD. A fatigue crack propagation model for 2024 aluminum alloy under different R-values was established based on the grain twist angle and Schmid factor. Finally, the impact of R on the crack tip shielding (Ks) was systematically analyzed, elucidating the intrinsic mapping relationship between R, microstructure, and crack propagation characteristics.

Trichloroethylene (TCE), a widely distributed environmental chemical contaminant, is extensively dispersed throughout the environment. Individuals who are exposed to TCE may manifest occupational medicamentose-like dermatitis due to trichloroethylene (OMDT). Renal impairment typically manifests in the initial phase of OMDT and is intricately linked to the disease progression and patient outcomes. Although recombinant human tumor necrosis factor-α receptor II fusion protein (rh TNFR:Fc) has been employed in the clinical management of OMDT, there was no substantial improvement in renal function observed in patients following one week of treatment. This study primarily examined the mechanism of TNFα- and IFNγ-induced endothelial cells (ECs) PANoptosis in TCE-induced kidney injury and hypothesized that the synergistic effect of TNFα and IFNγ could be the key factor affecting the efficacy of rh TNFR:Fc therapy in OMDT patients. A TCE-sensitized mouse model was utilized in this study to investigate the effects of TNFα and IFNγ neutralizing antibodies on renal vascular endothelial cell PANoptosis. The gene of interferon regulatory factor 1 (IRF1) in human umbilical vein endothelial cells (HUVEC) was silenced by using small interfering RNA (siRNA), and the cells were then treated with TNFα and IFNγ recombinant protein to investigate the mechanism of TNFα combined with IFNγ-induced PANoptosis in HUVEC. The findings indicated that mice sensitized to TCE exhibited increased levels of PANoptosis-related markers in renal endothelial cells, and treatment with TNFα and IFNγ neutralizing antibodies resulted in a significant reduction in PANoptosis and improvement in renal function. In vitro experiments demonstrated that silencing IRF1 could reverse TNFα and IFNγ-induced PANoptosis in endothelial cells. These results suggest that the efficacy of rh TNFR:Fc may be influenced by TNFα and IFNγ-mediated PANoptosis in kidney vascular endothelial cells. The joint application of TNFα and IFNγ neutralizing antibody represented a solid alternative to existing therapeutics.

The hydrogen absorption/desorption kinetic properties of MgH2 can be effectively enhanced by doping specific catalysts. In this work, MOFs-derived NiCu@C nanoparticles (∼15 nm) with regular core-shell structure were successfully prepared and introduced into MgH2 (denoted as MgH2NiCu@C). The onset and peak temperatures of hydrogen desorption of MgH2–11 wt.% NiCu@C are 175.0 °C and 282.2 °C, respectively. The apparent activation energy of dehydrogenated reaction is 77.2 ± 4.5 kJ/mol for MgH2–11 wt.% NiCu@C, which is lower than half of that of the as-milled MgH2. Moreover, MgH2–11 wt.% NiCu@C displays great cyclic stability. The strengthening “hydrogen pumping” effect of reversible solid solutions Mg2Ni(Cu)/Mg2Ni(Cu)H4 is proposed to explain the remarkable improvement in hydrogen absorption/desorption kinetic properties of MgH2. This work offers a novel perspective for the design of bimetallic nanoparticles and beyond for application in hydrogen storage and other energy related fields.