Search

Coronary artery disease (CAD) is a chronic disease associated with high mortality and morbidity. Although treatment with drug-eluting stents is the most frequent interventional approach for coronary artery disease, drug-coated balloons (DCBs) constitute an innovative alternative, especially in the presence of certain anatomical conditions in the local coronary vasculature. DCBs allow the fast and homogenous transfer of drugs into the arterial wall, during the balloon inflation. Their use has been established for treating in-stent restenosis caused by stent implantation, while recent clinical trials have shown a satisfactory efficacy in de novo small-vessel disease. Several factors affect DCBs performance including the catheter design, the drug dose and formulation. Cleverballoon focuses on the design and development of an innovative DCB with everolimus. For the realization of the development of this new DCB, an integrated approach, including in- vivo, in-vitro studies and in-silico modelling towards the DCB optimization, is presented.Clinical Relevance-The proposed study introduces the integration of in- vivo, in-vitro and in silico approaches in the design and development process of a new DCB, following the principles of 3R's for the replacement, reduction, and refinement of animal and clinical studies.

A preliminary analysis was conducted on data acquired from RNA sequencing and SomaScan platforms, for the classification of patients with Inflammation of Unknown Origin. To this end, a multimodal data integration approach was designed, by combining the two platforms, in order to assess the potentiality of learning estimators, using the differentially expressed features from the independent profiling experiments of both platforms. The classification framing was the differentiation of Inflammation of Unknown Origin patients against a multitude of Systemic Autoinflammatory disease patients. Separate false discovery rate analyses were performed on each dataset to extract statistically significant features between the two designated sample groups. Genomic analysis managed higher overall classification metrics compared to proteomic analysis, averaging an ~19% increase overall metrics and classifiers, with a ~0.07% increase in standard error. The multimodal data integration approach achieved similar results to the individual platforms' analyses. More specifically, it managed the same classification accuracy, sensitivity, and specificity scores as the best individual analysis, with the simple Logistic Regression estimator.Clinical Relevance- This study highlights the advantage of exploiting RNA sequencing data to identify potential Inflammation of Unknown Origin disease specific biomarkers, even against other Systemic Autoinflammatory diseases. These findings are further emphasized given the non-apparent clinical discrepancy between Inflammation of Unknown Origin and other Systemic Autoinflammatory diseases.

Dementia is the main cause of disability in elderly populations. It has been shown that the risk factors of dementia are a mixture of pathological, lifestyle and heritable factors, with some of those being provably modifiable. Early diagnosis of dementia and approaches to slow down its evolution are currently the most prominent management methodologies due to lack of a cure. For that reason, a plethora of home-based assistive technologies for dementia management do exist, with most of them focusing on the improvement of memory and thinking. The main objective of LETHE is prevention in the whole spectrum of cognitive decline in the elderly population at risk reaching from asymptomatic to subjective or mild cognitive impairment to prodromal Dementia. LETHE will provide a Big Data collection platform and analysis system, that will allow prevention, personalized risk detection and intervention on cognitive decline. Through the subsequent 2-year clinical trial, the LETHE system, as well as the respective knowledge gained will be evaluated and validated. The scope of the current paper is to introduce the LETHE study and its respective novel platform as a holistic approach to multidomain lifestyle intervention trial studies. The present work depicts the architectural perspective and extends beyond state-of-the-art guidelines and approaches to health management systems and cloud platform development.Clinical Relevance - Patient Management Systems as well as lifestyle management platforms have significant clinical relevance as they allow for remote and continuous monitoring of patients' health status. LETHE aims to improve patient outcomes by providing predictive models for cognitive decline and patient adherence to the multimodal lifestyle intervention, enabling prompt and appropriate medical decisions.

Bioresorbable Vascular Scaffolds (BVS), developed to allow drug deliver and mechanical support, followed by complete resorption, have revolutionized atherosclerosis treatment. InSilc is a Cloud platform for in silico clinical trials (ISCT) used in the design, development and evaluation pipeline of stents. The platform integrates beyond the state-of-the-art multi-disciplinary and multiscale models, which predict the scaffold's performance in the short/acute and medium/long term. In this study, a use case scenario of two Bioabsorbable Vascular Stents (BVSs) implanted in the same arterial anatomy is presented, allowing the whole InSilc in silico pipeline to be applied and predict how the different aspects of this intervention affect the success of stenting process.

Cardiovascular disease (CVD) and especially atherosclerosis are chronic inflammatory diseases which cause the atherosclerotic plaque growth in the arterial vessels and the blood flow reduction. Stents have revolutionized the treatment of this disease to a great extent by restoring the blood flow in the vessel. The present study investigates the performance of the blood flow after stent implantation in patient-specific coronary artery and demonstrates the effect of using Newtonian vs. non-Newtonian blood fluid models in the distribution of endothelial shear stress. In particular, the Navier-Stokes and continuity equations were employed, and three non-Newtonian fluid models were investigated (Carreau, Carreau-Yasuda and the Casson model). Computational finite elements models were used for the simulation of blood flow. The comparison of the results demonstrates that the Newtonian fluid model underestimates the calculation of Endothelial Shear Stress, while the three non-Newtonian fluids present similar distribution of shear stress. Keywords: Blood flow dynamics, stented artery, non-Newtonian fluid. Clinical Relevance- This work demonstrates that when blood flow modeling is performed at stented arteries and predictive models are developed, the non-Newtonian nature of blood must be considered.

Atherosclerosis is one of the most mortal diseases that affects the arterial vessels, due to accumulation of plaque, altering the hemodynamic environment of the artery by preventing the sufficient delivery of blood to other organs. Stents are expandable tubular wires, used as a treatment option. In silico studies have been extensively exploited towards examining the performance of such devices by employing Finite Element Modeling. This study models the crimping stage during stent implantation to examine the effect of inclusion of pre-stress state of the stent. The results show that modeling of the crimping stress state of the stent prior to the deployment results in under-expansion of the stent, due to the indirect inclusion of strain-induced hardening effects. As a result, it is evident that the compressive stent stress configuration is important to be considered in the computational modeling approaches of stent deployment.

The introduction of Bioresorbable Vascular Scaffolds (BVS) has revolutionized the treatment of atherosclerosis. InSilc is an in silico clinical trial (ISCT) platform in a Cloud-based environment used for the design, development and evaluation of BVS. Advanced multi-disciplinary and multiscale models are integrated in the platform towards predicting the short/acute and medium/long term scaffold performance. In this study, InSilc platform is employed in a use case scenario and demonstrates how the whole in silico pipeline allows the interpretation of the effect of the arterial anatomy configuration on stent implantation.

This case-study examines the release time of the everolimus drug from an experimental biodegrading coating of a Rontis corp. drug eluting stent (DES). The controlled drug release is achieved by the degradation of the coating, which consists of a mixture of polylactic co-glycolic acid (PLGA) and everolimus (55:45). In our analysis, we used the outcome of another study, which contains the geometry of an in-silico deployed Rontis corp. stent in a 3D reconstructed coney arterial segment. Using this geometry as input, the everolimus release was simulated using a computational model that includes: i) modeling of the blood flow dynamics, ii) modeling of PLGA degradation, and iii) modeling of the everolimus advection and diffusion towards both the lumen and the arterial wall. The results show the rapid release of everolimus. This is justified due to the high porosity of the coating, which is caused by the initial high concentration of everolimus in the coating.Clinical Relevance - The methodology presented in this work is an additional step towards predicting accurately drug release from DES. Also, the results of our work prove that high drug concentration in the coating causes its rapid release, which could be used as input in the design of new DES.

Atherosclerosis is a chronic inflammatory disease associated with heart attack and stroke. It causes the growth of atherosclerotic plaques inside the arterial vessels, which in turn results to the reduction of the blood flow to the different organs. Drug-Eluting Stents (DES) are mesh-like wires, carrying pharmaceutical coating, designed to dilate and support the arterial vessel, restore blood flow and through the controlled local drug delivery inhibit neo-intimal thickening. In silico modeling is an efficient method of accurately predicting and assessing the performance of the stenting procedure. The present in silico study investigates the performance of two different stents (Bare Metal Stent, Drug-Eluting Stent) in a patient-specific coronary artery and assesses the effect of stent coating, considering that the same procedural approach is followed by the interventional cardiologist. The results demonstrate that even if small differences are obtained in the two models, the incorporation of the stent coatings (in DES) does not significantly affect the outcomes of the stent deployment, the stresses and strains in the scaffold and the arterial tissue. Nevertheless, it is suggested that regarding the DES expansion, higher pressure should be applied at the inner surface of the stent.

Quantitative Coronary Angiography (QCA) is an important tool in the study of coronary artery disease. Validation of this technique is crucial for their ongoing development and refinement although it is difficult due to several factors such as potential sources of error. The present work aims to a further validation of a new semi-automated method for three-dimensional (3D) reconstruction of coronary bifurcations arteries based on X-Ray Coronary Angiographies (CA). In a dataset of 40 patients (79 angiographic views), we used the aforementioned method to reconstruct them in 3D space. The validation was based on the comparison of these 3D models with the true silhouette of 2D models annotated by an expert using specific metrics. The obtained results indicate a good accuracy for the most parameters (≥ 90 %). Comparison with similar works shows that our new method is a promising tool for the 3D reconstruction of coronary bifurcations and for application in everyday clinical use.

In the recent years, Bioresorbable Vascular Scaffolds (BVS) for the treatment of atherosclerosis have been introduced. InSilc is a cloud based in silico clinical trial (ISCT) platform for drug-eluting BVS. The platform integrates multidisciplinary and multiscale models predicting the BVS performance. In this study, we present a use case scenario and demonstrate the functioning of the individual modules and of the whole pipeline and the ability to predict BVS short, medium, long-term outcomes.

SMARTool aims to perform accurate risk stratification of coronary artery disease patients as well as to provide early diagnosis and prediction of disease progression. This is achieved by the acquisition of data from about 263 patients including computed tomography angiographic images, clinical, molecular, biohumoral, exposome, inflammatory and omics data. Data are collected in two time points with a followup period of approximately 5 years. In the first step, data mining techniques are implemented for the estimation of risk stratification. In the next step, patients, who are classified as medium to high risk are considered for coronary imaging and computational modelling of blood flow, plaque growth and stenosis severity assessment. Additionally, patients with increased stenosis are selected for stent deployment. All the above modules are integrated in a cloud-based platform for the clinical decision support (CDSS) of patients with coronary artery disease. The work presents preliminary results employing the SMARTool dataset as well as the concept and architecture of the under development platform.

The aim of this work is to present KardiaTool platform, an integrated Point of Care (POC) solution for noninvasive diagnosis and therapy monitoring of Heart Failure (HF) patients. The KardiaTool platform consists of two components, KardiaPOC and KardiaSoft. KardiaPOC is an easy to use portable device with a disposable Lab-on-Chip (LOC) for the rapid, accurate, non-invasive and simultaneous quantitative assessment of four HF related biomarkers, from saliva samples. KardiaSoft is a decision support software based on predictive modeling techniques that analyzes the POC data and other patient's data, and delivers information related to HF diagnosis and therapy monitoring. It is expected that identifying a source comparable to blood, for biomarker information extraction, such as saliva, that is cost-effective, less invasive, more convenient and acceptable for both patients and healthcare professionals would be beneficial for the healthcare community. In this work the architecture and the functionalities of the KardiaTool platform are presented.

Coronary artery disease (CAD) is the leading cause of mortality in Europe and worldwide. Atherosclerosis is the most common pathologic process that is highly related with CAD, while the implantation of drug-eluting Bioresorbable Vascular Scaffolds (BVS) is the most promising procedure for treating patients with CAD. InSilc is an textbfin silico clinical trial (ISCT) platform for the development and assessment of drugeluting BVS. The InSilc platform provides insight in the performance of drug-eluting BVS in their short term and medium/long term through the Mechanical Modelling Module, the Deployment Module, the Fluid Dynamics Module, the Myocardial Perfusion Module, the Drug-delivery Module and the Degradation Module. In order for the aforementioned modules to be developed, the utilization of the reconstructed patient specific arterial segment and the BVS design are required, which is achieved through the 3D reconstruction and plaque characterization tool.In this study, the overall architecture of the InSilc platform is presented with special emphasis on the 3D reconstruction and plaque characterization tool. The tool will be able to implement different medical image processing workflows. The workflows will require minimum user intervention in order to be used in large scale clinical trials.

The aim of this work is to present a computational approach for the estimation of the severity of heart failure (HF) in terms of New York Heart Association (NYHA) class and the characterization of the status of the HF patients, during hospitalization, as acute, progressive or stable. The proposed method employs feature selection and classification techniques. However, it is differentiated from the methods reported in the literature since it exploits information that biomarkers fetch. The method is evaluated on a dataset of 29 patients, through a 10-fold-cross-validation approach. The accuracy is 94 and 77% for the estimation of HF severity and the status of HF patients during hospitalization, respectively.

Microanastomosis is a surgical procedure used to reconnect two blood vessels using sutures. The optimal microanastomosis may be predicted by assessing the factors that influence this invasive procedure. Blood flow and hemodynamics following microanastomosis are important factors for the successful longevity of this operation. How is the blood flow affected by the presence of sutures? Computational Fluid Dynamics (CFD) is a powerful tool that permits the estimation of specific quantities, such as fluid stresses, that are hardly measurable in vivo. In this study, we propose a methodology which evaluates the alterations in the hemodynamic status due to microanastomosis. A CFD model of a reconstructed artery has been developed, based on anatomical information provided by intravascular ultrasound and angiography, and was used to simulate blood flow after microanastomosis. The 3D reconstructed arterial segments are modeled as non-compliant 1.24 - 1.47 mm diameter ducts, with approximately 0.1 mm arterial thickness. The blood flow is considered laminar and the no-slip condition is imposed on the boundary wall, which is assumed to be rigid. In analyzing the results, the distribution of the wall shear stress (WSS) is presented in the region of interest, near the sutures. The results indicate that high values of WSS appear in the vicinity of sutures. Such regions may promote thrombus formation and subsequently anastomotic failure, therefore their meticulous study is of high importance.

Endovascular stent deployment is a mechanical procedure used to rehabilitate a diseased arterial segment by restoring blood flow in occluded regions. The success or failure of the stent implantation depends on the stent device and the deployment technique. The optimal stent deployment can be predicted by investigating the factors that influence this minimally invasive procedure. In this study, we propose a methodology which evaluates the alterations in the arterial environment caused by stent deployment. A finite element model of a reconstructed right coronary artery with a stenosis was created based on anatomical information provided by intravascular ultrasound and angiography. The model was used to consider placement and performance after intervention with a commercially available Leader Plus stent. The performance of the stent, within this patient-specific arterial segment is presented, as well as the induced arterial deformation and straightening. The arterial stress distribution is analyzed with respect to possible regions of arterial injury. Our approach can be used to optimize stent deployment and to provide cardiologists with a valuable tool to visually select the position and deploy stents in patient-specific reconstructed arterial segments, thereby enabling new methods for optimal cardiovascular stent positioning.