Search

Abstract: This paper compares the influence of the molecular weight of polylelectrolytes forming polyelectrolyte multilayers (PEM) on wood fibers on adhesion and paper strength. Sheets were made from fibers treated with poly(allylamine hydrochloride) (PAH)/poly(acrylic acid) (PAA) of molecular mass 70,000 and 240,000, respectively, and of poly(dimethyldiallylammonium chloride) (PDADMAC)/poly(styrene sulfonate) (PSS) of molecular mass 30,000 and 80,000, respectively. The results were compared to what has recently been reported for PEM formation on fibers using a low-molecular-mass combination of PAH and PAA and a high-molecular-mass combination of PDADMAC/PSS. There was a less significant improvement in the case of the low-molecular-mass PDADMAC/PSS and the high-molecular-mass PAH/PAA. The adsorbed amounts of PAH and PDADMAC were also determined, showing a lower adsorbed amount of the low-molecular-mass PAH than of the high-molecular-mass PDADMAC. The amount of low-molecular-mass PDADMAC was similar to that found for high-molecular-mass PDADMAC/PSS. Individual fibers were partly treated and studied, showing a less significant decrease in wettability with low-molecular-mass PDADMAC/PSS than with the high-molecular-mass combination. The effect of the molecular weight on the adhesion was discussed in terms of the structure and wettability of the PEMs. [Copyright &y& Elsevier]

Abstract: In this study, particle polyelectrolyte complexes (PPECs) were formed by mixing cationic polyacrylamide (CPAM) and silica nanoparticles using the jet mixing technique. Within certain limits, the size of the formed PPECs could be controlled. The aim was to prepare PPECs with embedded sacrificial bonds, similar to those found in bones. Examination of PPEC adsorption to silica model surfaces indicated that smaller PPECs adsorbed to a higher level than larger ones, due to the higher diffusion speed of smaller complexes. Adsorption studies of the same components as in the PPECs, but arranged in multilayers, that is, particle polyelectrolyte multilayers (PPEMs), indicated a stable, gradual build-up of material on the surface with smaller nanoparticles, whereas PPEMs comprising elongated nanoparticles appeared to be more loosely adsorbed onto the surface when the nanoparticles were in the outer layer, due to repulsive forces within the adsorbed layer. The AFM colloidal probe technique was used to study the interaction between surfaces treated with PPECs, multilayers, or polyelectrolyte complexes (PECs). The results showed that the expected long-range disentanglement could be achieved with PPECs but that the pull-off forces were generally low. Treatment with PPEMs comprising the same polymer and nanoparticle components produced higher pull-off values, together with disentanglement behaviour, possibly due to better contact between the surfaces. Adhesion experiments with polymer PECs showed significantly higher pull-off values than with the PPECs, probably due to polymer interdiffusion across the surface boundary. [Copyright &y& Elsevier]