Search

Agricultural tractors may idle from 10 to 43% of their entire operating life and this inoperative time must be minimised because it is detrimental to the environment, public health, fuel economy, and engine lifespan (Perozzi et al., 2016). On passenger cars, start and stop (SS) systems have been extensively used, but they are not currently installed in any commercial tractor. Studies show that for very short idling stops SS systems might be ineffective for the additional energy required for re-starting the engine. This study aims to investigate the potential advantages of SS systems on agricultural tractors. To this aim, the energy required for engine start-up and the subsequent emissions were measured and then compared with the energy and the emissions during idling. Moreover, a predefined control strategy of the SS system was developed, and its potential fuel and emission savings were estimated using real-world data. In terms of fuel consumption and CO emission, turning off the engine is recommended for stops longer than 4 s and 134 s, respectively. From the collected real-world data, the tractor was run on idle for 21.7% of the entire operating duration. The results obtained with the SS control strategy developed in this paper applied to the US area, where there are 1.2 million tractors of the same power level of the tractor used in this study with a yearly usage up to 850 h, would permit to save 285.6 million litres of fuel, and, respectively of 16.5 and 754 tons of CO and CO 2. • Turning off the engine for idling stops longer than 4 s leads to fuel savings. • Turning off the engine for idling stops longer than 134 s leads to CO savings. • 45% of idling time could be avoided by farmers. • Start and Stop systems are an effective way for saving fuel and emissions. [ABSTRACT FROM AUTHOR]

This paper examines the effects of extreme temperatures on mortality rates, using random year-to-year variation in temperature based on county-level panel data from China. The analysis finds a robust, U-shaped relationship between temperature and mortality rates, indicating that extremely cold or hot temperatures lead to excess deaths. The heat-related (cold-related) effect is 3.5 times (3.2 times) as large as previous findings that used U.S. data, and it is especially large for the elderly population, mainly due to excess deaths caused by cardiovascular diseases. Applying these results to climate change predictions from Hadley Centre Global Environmental Model shows that by 2061–2080 the annual mortality rate is likely to increase by 14.2% if global greenhouse gas emissions continue to rise throughout the 21st century, the estimated health cost of which is around 0.98 trillion Chinese Yuan per year. The paper also explores households' adaptation behaviors to extreme temperatures. It finds that although urban households adaptively increase energy consumption when they are exposed to cold temperatures and purchase more air conditioners on hot and cold days, rural households are unresponsive to temperature fluctuations. This finding implies that rural people may be more resource constrained and suffer more when extreme temperatures occur. [ABSTRACT FROM AUTHOR]

Circular economy (CE) aims at sustainable development (SD) by focusing more on renewable sources of energy and precise management of waste to i) guarantee the secure access to resources, ii) combat climate change and global warming. Environmental issues arising from energy use and lack of policies to monitor them challenge sustainable development. Circular economy emphasizes the economic development with the least amount of undesirable environmental impacts. To evaluate the environmental performance of decision-making units (DMUs) with data envelopment analysis (DEA), this paper develops a common set of weights (CSW) model using the ideal point method. Therefore, energy and environmental efficiency of the organization for economic cooperation and development (OECD) countries is analyzed using the Malmquist productivity index (MPI) during 2012–2015. Although Switzerland has the highest energy and environmental efficiency during 2012–2014, findings indicate that Ireland and the USA have continuously improved their energy and environmental efficiency. • Developing common set of weight models based on ideal point method. • Common weight analysis of Malmquist productivity index. • Guaranteeing the unique optimal solution for policy making. • Analysing the energy and environmental performance of OECD countries. • Dealing with undesirable outputs for efficiency analysis. [ABSTRACT FROM AUTHOR]

Abstract: This paper provides new evidence on the relationship between management practices and firm performance. We interviewed managers of 190 randomly selected manufacturing plants in the UK and matched their responses with official business microdata. We find that climate friendly management practices are associated with lower energy intensity and higher productivity. Firms that adopt more such practices also conduct more climate friendly R&D which will sustain future growth in energy efficiency. Our findings are akin to the “energy efficiency paradox” and highlight the linkages between particular management practices and firm-level energy efficiency. We also find a strong empirical link between climate friendly management practices and organizational structure. Firms are more likely to adopt such practices if climate change issues are managed by the environmental or energy manager, and if this manager is close to the CEO. Adoption is less likely when the CEO is in charge of climate change issues. [Copyright &y& Elsevier]

This paper summarises the methodology and results of work involved in the investigation of energy demand in six Chinese villages included in the SUCCESS Project. The procedures used to collect data associated with local energy demand are explained and the approach to data analysis is explained. Results are provided in terms for delivered energy consumption, as an indicator of energy demand; primary energy consumption, as an indicator of energy resource depletion; and carbon dioxide emissions, as an indicator of global climate change. Similarities and differences between results for this sample of villages are considered. The important causes of differences in results are investigated. [Copyright &y& Elsevier]

To tackle climate change, Chinese government has applied an array of mitigating measures to reduce CO2 emissions. During the 11th Five-year Plan, Chinese government set the emission reduction target policy to reduce energy consumption per unit of gross domestic product (GDP) by 20%. This paper attempts to estimate the effect of this emission reduction target policy on industrial performance from complexity perspective. The result shows more complex industrial structure is related to less coal consumption. In general, emission reduction target policy has a negative effect on the probability of branching into new industries and lower the productivity and profitability of a given industry. However, this negative effect is weaker for more complex industries. Only for industries with very high complexity, emission reduction target policy can improve the performance of an industry rather than exerting a negative effect. Our finding not only helps to design a more effective policy to achieve industrial development strategy, but also provides a potential way to achieve economic growth while reduce the emission of greenhouse gases at the same time. • We investigate the impact of Emission reduction target policy(ERT) on industrial performance from complexity perspective. • We apply the method of reflection to calculate the Economic Complexity of provinces and Industry Complexity of industries. • More complex industrial structure contributes to the coal consumption reduction. • ERT has negative effects on the probability of branching into new industries, lowers the productivity and profitability of a given industry. • ERT has weaker negative effects for more complex industries. [ABSTRACT FROM AUTHOR]

Toll plazas are places on the road network where increased emissions of exhaust gases occur due to changes in vehicle driving regime in their corresponding impact areas. Therefore, they provide a great potential in terms of the ability to significantly reduce the emission of pollutants by using advanced technologies. In light of this, this paper aims at getting the most accurate quantification of pollutant emission (CO, CO2, HC and NOx) for the various vehicle categories which use Manuel System (MS), Electronic toll collection (ETC) with mechanical barriers and Multi Lane Free Flow (MLFF) system, for determining ecological benefits that can be achieved using advanced tolling systems. The measurement of the emission of harmful gases was carried out in real field conditions for the five most common classes of passenger cars, light truck and semi-trailer-truck. Vehicle speed, fuel consumption and emission of pollutants were recorded every second, in various driving processes in the impact areas of toll plazas, as well as in numerous scenarios that involve a different number of vehicles in a queue. The obtained results show that the use of the MLFF system, compared to the MS, can achieve a reduction in CO2 in the range of 25%–45% and the reduction in NOx in the range of 32%–98%, depending on the type of vehicle and the considered scenario. The case study of the tolling system in the Republic of Serbia, on a sample of 77,408,112 vehicles, has shown that moving from the existing to an advanced MLFF tolling system allows for annual ecological benefits ranging from 1,349,862 € to 1,491,391 €. • Field research of car and truck pollutant emission using different toll systems. • Determination of emission of different driving modes for the tested toll systems. • Significant ecological benefits achieved by the advanced toll system implementation. • Contribution to reduction of greenhouse gases, global warming and climate change. • Ecological benefits quantified through the Case Study of the Republic of Serbia. [ABSTRACT FROM AUTHOR]