Search

Fifteen soft wheat varieties were evaluated for their grain, milling, flour and dough mixing characteristics, as well as their solvent retention capacities (SRCs), pasting properties and suitability for making baking powder biscuits, to identify wheat quality characteristics required for making biscuits. Grain and flour protein contents and sodium dodecyl sulfate sedimentation (SDSS) volume showed positive relationships with biscuit height and shape factor (SF). Kernel hardness, damaged starch content and water SRC exhibited negative correlations with biscuit specific volume (SV), while peak viscosity and grain protein content were positively associated with biscuit SV. Stepwise multiple regression analysis indicated that biscuit height and SV can be predicted from flour protein content (R 2 = 0.65) and damaged starch content (R 2 = 0.69), respectively; while SDSS volume and flour yield together predict biscuit SF (R 2 = 0.83). Cluster analysis based on biscuit height and SF indicated that seven soft wheat varieties with flour protein contents greater than 7.9% and SDSS volumes lower than 32.0 mL produce good-quality biscuits with high height, intermediate SF, great SV and soft crumb. The results of this study suggest that soft wheat flours with intermediate-to-high protein contents (7.9–9.7%), intermediate SDSS volumes (20.0–32.0 mL) and low damaged starch contents (1.9–3.4%) are suitable for making desirable-quality biscuits. [ABSTRACT FROM AUTHOR]

Easy and clean separation of starchy endosperm from bran during milling could have a significant contribution to the increased flour yield. Starch content and DMSO extractable content of bran were determined as the estimates for remnant endosperm content of bran for 61 and 100 soft red winter (SRW) wheat genotypes grown in 2013 and 2014, respectively. DMSO extractable content was found to be more reliable in the estimation of remnant endosperm content of bran than was starch content with better reproducibility. Flour yields of the 2013 and 2014 SRW wheat varieties tested ranged from 65.1 to 72.4% (w/w), and 63.6–73.9% (w/w), respectively. The remnant endosperm content of bran estimated using the DMSO extractable content ranged from 33.9 to 43.6% (w/w) and 35.4–47.4% (w/w) for the 2013 and 2014 crops, respectively. The remnant endosperm content was significantly related to flour yield with a correlation coefficient of r = −0.54 ( P < 0.001) from the 2014 crop, which was greater than that for any other grain characteristics including test weight, kernel hardness, and kernel weight. The degree of endosperm separation varied with different wheat varieties, different bran pieces and even different parts of the same piece of bran. [ABSTRACT FROM AUTHOR]

Abstract: Gelatinized waxy and normal corn starches at various concentrations (20–50%) in water were stored under temperature cycles of 4°C and 30°C (each for 1 day) up to 7 cycles or at a constant temperature of 4°C for 14 days to investigate the effects of temperature cycling on the retrogradation of both starches. Compared to starches stored only at 4°C, both starches stored under the 4/30°C temperature cycles exhibited smaller melting enthalpy for retrogradation (ΔH r), higher onset temperature (T o), and lower melting temperature range (T r) regardless of the starch concentration tested. Fewer crystallites might be formed under the temperature cycles compared to the isothermal storage, but the crystallites formed under temperature cycling appeared more homogeneous than those under the isothermal storage. The effect of starch content on the retrogradation was greater when the starch gels were stored under cycled temperatures. The reduction in ΔH r and the increase in conclusion temperature (T c) by retrogradation under 4/30°C temperature cycles became more apparent when the starch concentration was lower (20 or 30%). Degree of retrogradation based on melting enthalpy was greater in normal corn starch than in waxy corn starch when starch content was low. [Copyright &y& Elsevier]

Abstract: Waxy maize starch gels prepared from 40% starch solids were retrograded, either isothermally at 4°C or at cycles of 4°C and 30°C (2 days each), for 16 days. The properties of retrograded starch gels were determined by differential scanning calorimetry (DSC), X-ray diffraction patterns, textural properties, and in vitro digestibility. The starch crystals formed in the gel stored under the 4/30°C cycled conditions melted at a higher onset temperature with a narrower endothermic peak and a lower enthalpy than those formed under constant temperature storage at 4°C. No differences between the two storage conditions were observed in the X-ray diffraction patterns of retrograded starch. The glass transition temperature increased and the ice melting enthalpy decreased throughout the retrogradation process regardless of the temperature cycle. The starch gel stored under the cycled temperature conditions exhibited slightly lower and greater ice melting enthalpy than those stored under the constant 4°C. The starch gel retrograded at the cycled temperature conditions remained softer than those stored under constant temperature with similar springiness. The cycled temperature storage induced a greater amount of resistant starch and reduced the in vitro glycemic index more effectively than the isothermal storage condition. [Copyright &y& Elsevier]

Abstract: Barley (Hordeum vulgare vulgare L.) is an ancient cereal grain, which upon domestication has evolved from largely a food grain to a feed and malting grain. However, barley food use today remains important in some cultures around the world, particularly in Asia and northern Africa, and there is renewed interest throughout the world in barley food because of its nutritional value. This review covers basic and general information on barley food use and barley grain processing for food use, as well as an in-depth look at several major aspects/traits of interest for barley food use including kernel hardness and colour, grain starch, and β-glucan contents. These traits are described in terms of their effects on processing and nutrition, as well as their inheritance and the prospects for barley improvement through breeding. Whereas, the aspects listed above have been studied relatively extensively in barley in terms of content, form, genetics, physiology, and in some cases nutritional quality, little is know about functional properties for processing and food product development. Renewed interest in barley for food uses largely centres around the effects of β-glucans on lowering blood cholesterol levels and glycemic index. Wholegrain barley foods also appear to be associated with increased satiety and weight loss. There is great potential to utilise barley in a large number of cereal-based food products as a substitute partially or wholly for currently used cereal grains such as wheat (Triticum aestivum), oat (Avena sativa), rice (Oryza sativa), and maize (Zea mays). [Copyright &y& Elsevier]

Abstract The varietal differences in pre-harvest sprouting (PHS) resistance and associated grain characteristics have yet to be understood. We tested the grains of 125–166 soft winter (SW) wheat varieties grown for three years for falling number (FN), α-amylase activity, and degree of sprouting (DS) under field sprouting (FS) and spike wetting conditions, and determined the characteristics of grain produced under non-FS conditions for two years. Eleven to 31 varieties exhibited FNs higher than 200 under spike wetting conditions, and 16 to 99 varieties exhibited FNs above 300 under FS conditions. Red wheat varieties showed significantly (p < 0.05) higher FNs than soft white wheat varieties for the grains produced under FS conditions in 2015 and 2017 and subjected to spike wetting in 2017. Awned varieties showed significantly (p < 0.05) lower FNs and higher DS values than awnless varieties when subjected to spike wetting in 2016. Falling number, α-amylase activity, and DS of grain produced under FS in 2015, 2016 and 2017 exhibited significant correlations with test weight (TW) (p < 0.01) of grain produced under non-FS conditions in 2016 and 2017. Five awnless red wheat varieties exhibited relatively high FNs, even under FS and spike wetting conditions. Highlights • Soft wheat varieties show large differences in pre-harvest sprouting resistance. • Seed coat color and awn presence of wheat affect pre-harvest sprouting resistance. • High test weight potential of wheat is linked to pre-harvest sprouting resistance. [ABSTRACT FROM AUTHOR]

This study investigated the variations in the characteristics of brans obtained from a pilot-scale milling of 17 soft red winter wheat varieties and their influences on the quality of whole wheat northern-style Chinese steamed bread (CSB) prepared from blends of a base flour, brans of different wheat varieties and vital gluten. Protein, starch, total dietary fiber (DF), water extractable arabinoxylan (WEAX) and total phenolic contents of brans ranged from 14.3 to 19.1%, 12.0–19.4%, 43.5–50.3%, 0.69–1.35% and 14.3–18.9 mg/g, respectively. Surface smoothness, crumb structure and stress relaxation scores of whole wheat CSB ranged from 3.0 to 9.5, 6.5–12.5 and 24.3–34.3, respectively. Bran bound and total phenolic contents exhibited negative relationships with CSB surface smoothness and crumb structure. Bran WEAX content showed positive relationships with CSB specific volume, surface smoothness and stress relaxation scores. Bran insoluble DF content was negatively related to CSB stress relaxation score. Bran protein and starch contents showed negative and positive relationships, respectively, with CSB spread ratio score. Cluster analysis of wheat brans based on CSB surface smoothness and crumb structure indicated that bran with a low protein content, low bound and total phenolic contents, and high starch and WEAX contents is desirable for making whole wheat CSB. [ABSTRACT FROM AUTHOR]

Quality characteristics of northern-style Chinese steamed bread (CSB) prepared from two soft red winter (SRW) wheat flours blended with 0–30% waxy wheat flour (WWF) were analyzed to estimate the influence of starch amylose content. The increased proportion of WWF in blends raised mixograph absorption with insignificant changes in protein content and dough strength-related parameters. WWF incorporation generally increased specific volume and crumb softness of CSB. The analysis of covariance revealed that CSB quality attributes were little affected by protein content and dough strength-related parameters, indicating that starch amylose content was largely responsible for the changes in CSB quality. Flour blends with 5–10% WWF, of which starch amylose content was 22.4–24.7%, produced CSB with superior crumb structure compared to other blends, but insignificant changes in surface smoothness, stress relaxation and total score compared to the respective control wheat flours. Flour blends with 15% WWF to produce a starch amylose content of 21.4–22.7% exhibited reduced staling of CSB with total scores comparable to the respective control wheat flours. CSB prepared from blends with more than 10% WWF exhibited a higher soluble starch content, indicative of reduced starch retrogradation, than that prepared from wheat flours without WWF during storage for 3 days. [ABSTRACT FROM AUTHOR]

The influence of added phytate on dough properties and bread baking quality was studied to determine the role of phytate in the impaired functional properties of whole grain wheat flour for baking bread. Phytate addition to refined flour at a 1% level substantially increased mixograph mixing time, generally increased mixograph water absorption, and reduced the SDS-unextractable protein content of dough before and after fermentation as well as the loaf volume of bread. The added phytate also shifted unextractable glutenins toward a lower molecular weight form and increased the iron-chelating activity of dough. It appears that phytate negatively affects gluten development and loaf volume by chelating iron and/or binding glutenins, and consequently interfering with the oxidative cross-linking of glutenin molecules during dough mixing. Phytate could be at least partially responsible for the weak gluten network and decreased loaf volume of whole wheat flour bread as compared to refined flour bread. [ABSTRACT FROM AUTHOR]

Abstract: Kernel hardness, an important quality trait of cereal grains, is known to influence pearling properties and malting quality of barley. To understand the endosperm micro-structural features of kernels and their relationship to kernel hardness, endosperms of three hard and three soft hulled spring barley lines based on single kernel characterization system hardness index were observed under light (LM) and scanning electron (SEM) microscopy. Under LM, endosperm cell wall of the three hard kernel lines was significantly thicker than that of the three soft kernel lines. Hard and soft lines showed differences in the degree of starch-protein association and continuity of protein matrix under the SEM. Hard kernel lines with a continuous protein matrix exhibited greater starch-protein adhesion than the soft kernel lines, suggesting that starch-protein binding may be one of the factors influencing barley kernel hardness. SEM of flour particles of soft kernel lines showed numerous well defined individual A and B-type starch granules, while, flour of hard kernel lines mostly showed small flour aggregates with few individual starch granules. [Copyright &y& Elsevier]

This study investigated the effects of wheat bran pre-treatments by autoclaving, roasting, jet cooking, extrusion, puffing and high-temperature-high-pressure (HTHP) cooking on the properties of whole wheat meal (WWM) and the sensory attributes of Chinese steamed bread (CSB) and pancakes prepared from blends of refined flours and brans. All the pre-treatments of bran imparted negative influences on the gluten index of WWMs compared to untreated bran. Pre-hydration of bran and its incorporation into the fully developed dough of refined flour significantly improved the specific volume, surface smoothness and crumb structure of CSB. Autoclaving, roasting, jet cooking and puffing of bran resulted in no apparent positive effects on CSB sensory attributes. HTHP cooking significantly increased CSB specific volume, but negatively affected the flavor by increasing bitterness. Extrusion of bran improved CSB crumb structure, stress relaxation score and springiness. No apparent improvement in the sensory attributes was observed in pancakes with roasted, jet-cooked, extruded and puffed brans. The autoclaved bran produced pancakes of higher crumb moistness than untreated bran. The results suggest that extrusion and autoclaving of bran prior to being blended with refined flour would be effective ways to improve the quality of whole wheat CSB and pancakes, respectively. [Display omitted] • Hydrothermal and pressure treatments of bran affected the gluten index of WWM. • Pre-hydration of bran and incorporation after dough development increased CSB volume. • Extruded bran improved CSB crumb structure, stress relaxation score and springiness. • Autoclaving of bran was an effective way to improve the moistness of pancakes. [ABSTRACT FROM AUTHOR]

Whole wheat products have gained popularity in recent years due to the health and nutritional benefits, with Asian salted noodles as one formulation. However, there is a general perception of decreased product quality and sensory acceptance of whole wheat noodles This study examined changes to sensory properties, texture (tensile and compressive strength), color, and cooking loss of noodles prepared from blends of wheat flour and bran that underwent five forms of hydro, thermal, pressure and their combined treatments: autoclaving, extrusion, jet-cooking, puffing, and roasting. Including the control (bran without processing) all six treatments were deemed palatable by sensory panel evaluation despite having statistically significant differences in physiochemical and sensory properties. For instance, 10 of the 22 sensory properties demonstrated significant differences among treatments. Bran processing tended to result in weaker (tensile and compressive strength) and stickier noodles while allowing for greater uptake of water during cooking. Image 1 • Five thermal and pressure processing treatments of wheat bran were studied. • Puffing bran pretreatment produced the greatest number of favorable sensory ratings. • Mouthfeel ratings are correlated with compressive and tensile physical properties. [ABSTRACT FROM AUTHOR]

Aleurone flour is a nutrient-dense ingredient that can be incorporated into food products to improve nutritional and health benefits. The objective of this research was to evaluate dough and instant noodle quality using wheat flour/aleurone flour blends. Six blends of refined hard red spring wheat flour and aleurone flour at 100/0, 95/5, 90/10, 85/15, 80/20, and 75/25 blend ratios (g/g) were used to make instant noodles. Flour proteins increased by 3.7–13.1 g/kg with 50–250 g/kg aleurone flour substitution. Dough water absorption (65.6–75.4%) and mixing stability (15.2–17.6 min) were increased due to increased flour protein content after the inclusion of aleurone flour. However, the cooking yield of final instant noodle (142-127%) gradually declined with more aleurone flour substitution because of lower total starch and higher protein. Cooked noodle hardness (5.36–7.56 N) increased while springiness (0.962–0.937), cohesiveness (0.735–0.652) and resilience values (0.446–0.376) declined with increasing aleurone flour substitution due primarily to higher fiber content. Aleurone flour substitution for refined flour in instant noodle greatly increased total phenolic content and total dietary fiber content, effectively promoting its nutritional and health benefits to consumers. • Aleurone flour increased protein and mineral content of the flour blend. • Aleurone flour substitution increased dough stability and reduced paste viscosity. • Cooking yield, noodle color and texture were affected by aleurone substitution. • Aleuorne flour significantly increased dietary fiber content of instant noodles. • Aleurone flour significantly increased phenolics content of instant noodle. [ABSTRACT FROM AUTHOR]

Knowledge of HMW-GS composition and rye translocations of U.S. eastern soft winter (ESW) wheat, and their associations with protein characteristics will be helpful for the identification and selection of genotypes possessing the appropriate gluten strength for wheat-based products. HMW-GS composition and rye translocations of 149 ESW wheat varieties and their relationships with lactic acid solvent retention capacity and SDSS volume were determined. Subunits 2*, 7 + 8 and 2 + 12 are the predominant HMW-GSs in ESW wheat with frequencies of 72.7%, 47.7% and 36.7%, respectively. Two rare subunits, 2.. at Glu-A1 locus and 2+12 1 at Glu-D1 locus, were detected for the first time in ESW wheat, with frequencies of 1.6% and 21.9%, respectively. 1BL/1RS and 1AL/1RS translocations were observed in 18.8% and 10.9% of ESW wheat, respectively. Subunits 13 + 16, 5 + 10, and the absence of 1BL/1RS translocation showed associations with strong protein strength, whereas subunits 2+12 1 were associated with weak protein strength. Four HMW-GS profiles (2*, 7 + 8, 2+12 1), (2*, 7 + 8, 5 + 10), (2*, 7 + 9, 2 + 12), and (2*, 7 + 8, 2 + 12) were predominantly observed in 50.1% of ESW wheat. ESW wheat genotypes carrying subunits 13 + 16 or 7* + 8 at Glu-B1 locus and 5 + 10 at Glu-D1 locus without 1BL/1RS translocation are expected to produce wheat grain containing strong-gluten proteins. Image 1 • Wide variation in HMW-GS and rye translocations among U.S. soft winter wheat (SWW). • Subunits 2..at Glu-A1 and 2+12 1 at Glu-D1 were observed for the first time in SWW. • Glu-D1 had the highest genetic diversity and the greatest effect on protein strength. • Subunits 2+12 1 with a frequency of 21.9% were associated with weak protein strength. [ABSTRACT FROM AUTHOR]