Search

In stone artefact studies, researchers often rely on qualitative classifications to describe flake scar arrangements on cores. While this approach provides a broad overview of core reduction patterns, its application can be ambiguous due to the three-dimensional complexities of core geometry and the subjective nature of qualitative classifications, making it challenging to objectively compare flake scar patterning across different analytical settings. In this study, we present a new approach to quantify one aspect of flake scar arrangement on cores: the three-dimensional orientation of core scar negatives. Using standardised digital and experimentally flintknapped cores, we demonstrate that statistical techniques from fabric analysis can quantitatively characterise the scar orientation profile of cores. Importantly, this method is able to reveal variations in the flake scar arrangements of informal cores, such as multiplatform cores. When applied to a sample of multiplatform cores from the Homo floresiensis type-site of Liang Bua in Indonesia, we identify differences in flake scar orientation between cores made by Homo floresiensis and those manufactured by modern humans who utilised the site after the disappearance of the extinct hominin. This finding suggests a possible divergence in stone knapping practices between the two hominin taxa at Liang Bua. Overall, our research provides a new quantitative approach to gain new insights into hominin technological behaviour through stone artefact analysis. It also highlights the potential of 3D analysis for advancing the field of archaeological lithic research. • A new method for quantifying the 3D orientation of flake scars on cores. • Major core types can be differentiated on the basis of flake scar orientation data. • Effective in characterising scar pattern variability among multiplatform cores. • Detected scar orientation differences at the Homo floresiensis site of Liang Bua. [ABSTRACT FROM AUTHOR]

The Homa Peninsula, in southwestern Kenya, continues to yield insights into Oldowan hominin landscape behaviors. The Late Pliocene locality of Nyayanga (∼3–2.6 Ma) preserves some of the oldest Oldowan tools. At the Early Pleistocene locality of Kanjera South (∼2 Ma) toolmakers procured a diversity of raw materials from over 10 km away and strategically reduced them in a grassland-dominated ecosystem. Here, we report findings from Sare-Abururu, a younger (∼1.7 Ma) Oldowan locality approximately 12 km southeast of Kanjera South and 18 km east of Nyayanga. Sare-Abururu has yielded 1754 artifacts in relatively undisturbed low-energy silts and sands. Stable isotopic analysis of pedogenic carbonates suggests that hominin activities were carried out in a grassland-dominated setting with similar vegetation structure as documented at Kanjera South. The composition of a nearby paleo-conglomerate indicates that high-quality stone raw materials were locally abundant. Toolmakers at Sare-Abururu produced angular fragments from quartz pebbles, representing a considerable contrast to the strategies used to reduce high quality raw materials at Kanjera South. Although lithic reduction at Sare-Abururu was technologically simple, toolmakers proficiently produced cutting edges, made few mistakes and exhibited a mastery of platform management, demonstrating that expedient technical strategies do not necessarily indicate a lack of skill or suitable raw materials. Lithic procurement and reduction patterns on the Homa Peninsula appear to reflect variation in local resource contexts rather than large-scale evolutionary changes in mobility, energy budget, or toolmaker cognition. [ABSTRACT FROM AUTHOR]

One of the methods of analysing the manufacturing process of lithic tools is by "reading" the scars of removals visible on the surface of cores or bifaces. The paper aims to review the limitations of this approach, by answering the question as to how much information from the original knapping process is still preserved in the cores and bifaces. To quantify the information loss we used experimentally knapped pieces, that we then refitted to check which removals are still visible on the surface of the analysed forms. We tested different measures of information loss in the context of removals and sequences of removals, but also the chronological relationship between sequences i.e. the number of linear extensions and missing nearest connections. On average, 39.9% of the original removals and 54.1% of the sequences of removals are preserved on the surface, but only 14.1% of the original relationships between sequences can be observed. Finally, we used simple machine learning to find an algorithm for estimating the loss of the nearest chronological relationships between sequences when no refits are available. Due to the extremely high information loss for the linear order of the knapping process we: a) propose to abandon these elements of the diacritic approach which aim to reconstruct the rhythms and schemes of knapping; b) evaluate the quality of the reconstructed knapping scheme (partial order) prior to further comparative analyses. Here we propose an algorithm to estimate the number of missing connections to test the quality of the knapping process while using diacritic schemes. • The information loss refers to detached removals and the chronological relation between them. • 39.9% of detached removals are preserved on the surface of bifaces or cores. • 14.1% of the chronological relationships between sequences of removals can be observed. • The information loss during the knapping process is substantial. • It influences the chaine operatoire analyses based on tools or cores solely. [ABSTRACT FROM AUTHOR]

The Initial Upper Paleolithic (IUP) is one of the most important phases in the recent period of the evolution of humans. During a narrow period in the first half of Marine Isotope Stage 3 laminar industries, accompanied by developed symbolism and specific blade technology, emerged over a vast area, replacing different variants of the Middle Paleolithic. In western Eurasia, the earliest appearance of IUP technology is seen at the Boker Tachtit site, dated ca. 50 ka cal BP. The earliest evidence of IUP industries in the Balkans and Central Europe, linked to the spread of Homo sapiens , has been dated to around 48 ka cal BP. A key area of IUP dispersals are the mountains and piedmont of southern Siberia and eastern Central Asia. One of the reference assemblages here is Kara-Bom, an open-air site in the Siberian Altai. Three major settlement phases are distinguished in the sediment sequence. In this paper, we present the results of new radiocarbon determinations and Bayesian models. We find that the latest phase of the IUP, Upper Paleolithic 1 ('UP1') is bracketed between 43 and 35 ka cal BP (at 95.4% probability). The earliest IUP phase, 'UP2', begins to accumulate from ca. 49 ka cal BP and ends by ca. 45 ka cal BP. The Middle Paleolithic 'MP2' assemblages all fall prior to 50 ka cal BP. We can detect a spatial distribution of dates from the geographic core of the IUP beyond the Altai where it appears around 47–45 ka cal BP. The current distribution of dates suggests a west–east dispersal of the IUP technocomplex along the mountain belts of Central Asia and South Siberia. [ABSTRACT FROM AUTHOR]

This paper investigates core reduction intensity in the early Protoaurignacian lithic assemblage from Fumane Cave in northeastern Italy. Reduction intensity serves as a key tool to characterize blank selection strategies, raw material management, and the variability of knapping strategies throughout the reduction sequence by reconstructing the operatory field of core assemblages. Finally, it also aids in addressing the relationship between blades and bladelets, providing valuable insights into the behavioral and chrono-cultural significance of laminar productions within the Aurignacian technocomplex. To achieve these research goals, experimental work employing 3D scanning technology was conducted. This facilitated the comparison of different methods and variables for measuring reduction intensity, including the percentage of non-cortical surface, the Scar Density Index (SDI), and a novel adaptation of the Volumetric Reconstruction Method (VRM). Results demonstrate the effectiveness and potential of adapting the VRM for the study of reduction intensity in Upper Paleolithic laminar cores, and the provided R scripts and datasets will enable this method to be applied to other contexts with minimal need for modification to the workflow. Analysis of reduction intensity measures applied to the Protoaurignacian assemblage from Fumane Cave reveals slight variations based on factors such as the abundance and proximity of selected raw materials for blank production. Notably, the most prevalent raw material variety, the Maiolica, yields a higher number of less reduced cores, while reduction levels across all cores discarded at the site remain relatively high. The observed variability in the operatory field and the interrelation between blade and bladelet productions underscore the complexity and flexibility of Protoaurignacian behavior. This inherent complexity challenges any definitive separation between the operatory fields of blade and bladelet productions. These findings are particularly important to emphasize the importance of considering reduction intensity when examining technological variability and human behavior in Aurignacian studies. The proposed adaptation of the VRM and the effective combination with other measures of reduction, promises to allow future research to incorporate reduction intensity as a vital temporal component within studies on stone tool production. This integration offers a pathway to enhancing our understanding of the adaptive behaviors exhibited by Homo sapiens across diverse ecological settings and provides a clearer framework for better framing the development of the Upper Paleolithic. • Tested an adapted version of the VRM on blade & bladelet cores using experimental knapping and 3D scanning technology. • VRM effective with laminar core types, enhanced by methods like the SDI for comprehensive reduction intensity insights. • VRM & SDI used to explore raw material, core classification, and blank production in the Protoaurignacian from Fumane cave. • Results highlight challenges in separating the operatory fields of blade & bladelet productions in the Protoaurignacian. [ABSTRACT FROM AUTHOR]

The oldest recognized artifacts at the Swartkrans cave hominid-bearing site in South Africa have long been known to occur in the Lower Bank of Member 1, now dated with the cosmogenic nuclide burial method to ca. 1.8–2.19 Ma. However, the affinities of this industry have been debated due to small sample size. In this paper we present newly excavated material from the Lower Bank retrieved since 2005 in the Swartkrans Paleoanthropological Research Project. The sample is now large enough to confirm its affinity with the Oldowan industrial complex. The assemblage is highly expedient and core reduction strategies are largely casual. Although freehand flaking is present, the bipolar technique is most significant, even in non-quartz raw materials. The Swartkrans assemblage shows some significant contrasts with the Sterkfontein Oldowan, ca. 2.18 Ma, which can be explained by its closer proximity to raw material sources, its somewhat different geographic context, and its more expedient nature. The Swartkrans Oldowan now provides us with the first good indication of Oldowan variability in southern Africa, where only two sizeable assemblages have thus far been discovered. Comparisons are made with other sites across Africa that help to place this variability within our overall understanding of the Oldowan industrial complex. [ABSTRACT FROM AUTHOR]

The lithic assemblages at the Oldowan-Acheulean transition in Bed II of Olduvai Gorge, Tanzania, represent a wide variety of raw materials reflecting both the diversity of volcanic, metamorphic, and sedimentary source materials available in the Olduvai basin and surroundings and the preferences of the tool-makers. A geochemical and petrographic systematic analysis of lava-derived archaeological stone tools, combined with textural and mineralogical characterization of quartzite, chert, and other metamorphic and sedimentary raw materials from two Middle and Upper Bed II sites, has enabled us to produce a comprehensive dataset and characterization of the rocks employed by Olduvai hominins, which is used here to establish a referential framework for future studies on Early Stone Age raw material provenancing. The use of rounded blanks for most lava-derived artifacts demonstrates that hominins were accessing lava in local stream channels. Most quartzite artifacts appear to derive from angular blocks, likely acquired at the source (predominantly Naibor Soit hill), though some do appear to be manufactured from stream-transported quartzite blanks. Raw material composition of the EF-HR assemblage indicates that Acheulean hominins selected high-quality lavas for the production of Large Cutting Tools. On the other hand, the HWK EE lithic assemblage suggests that raw material selectivity was not entirely based on rock texture, and other factors, such as blank shape and availability of natural angles suitable for flaking, played a major role in Oldowan reduction sequences. [ABSTRACT FROM AUTHOR]

Debates regarding the validity of the Developed Oldowan as separate cultural facies within the Oldowan techno-complex have primarily concentrated on the Developed Oldowan B/Acheulean transition, with little attention paid to the validity of the Developed Oldowan A (DOA) as a valid technological differentiation. This study presents a diachronic technological analysis and comparison of Oldowan and DOA lithic assemblages from Olduvai Gorge, Tanzania, dated between 1.84 and 1.6 Ma, to test the validity of Leakey's original distinction between these two cultural facies. The results from this comparative analysis show very few technological differences between the lithic assemblages previously assigned to the DOA and Classic Oldowan. Significant diachronic variation in raw material availability and use is, however, identified between Bed I and Lower/Middle Bed II of Olduvai Gorge, which may go some way to explaining the originally perceived techno-cultural differences. The results suggest an increase in hominin knapping and percussive activities, as well as a clear ability to preferentially select high quality raw materials stratigraphically above Tuff IF. Technological innovation and complexity, however, does not seem to vary significantly between the Classic Oldowan and DOA assemblages. The results of this analysis along with similar studies from the wider eastern African region lead to the conclusion that the term Developed Oldowan A should no longer be used. [ABSTRACT FROM AUTHOR]

HWK EE is a little-known archaeological site from the top of Lower Bed II and the basal part of Middle Bed II, Olduvai Gorge, Tanzania. The site was originally excavated in the early 1970s by Mary Leakey, but the excavations and resulting lithic and fossil assemblages were never described. Here we report for the first time on the lithic and fossil assemblages that were recovered by Mary Leakey from the site. The lithic assemblage is one of the largest of any Oldowan site and is characterized by a core-and-flake technology with simple flaking techniques and minimal reduction of cores. Retouched flake frequencies and battered tools are higher than those reported for Olduvai Bed I and Lower Bed II assemblages, but flaking schemes are poorly organized. The fossil assemblage is well-preserved, taxonomically-rich, but dominated by bovids, and includes abundant feeding traces of both hominins and carnivores. Hominins are inferred to have broken the majority of limb bones at the site for access to marrow, while both carnivores and hominins likely had access to at least some flesh. HWK EE may represent one of the last Homo habilis sites at Olduvai Gorge, and is important to understanding the behavioral and cultural mechanisms that led to the emergence of the Acheulean and Homo erectus in the region. [ABSTRACT FROM AUTHOR]

The dispersal of Neanderthals and their genetic and cultural interactions with anatomically modern humans and other hominin populations in Eurasia are critical issues in human evolution research. Neither Neanderthal fossils nor typical Mousterian assemblages have been reported in East Asia to date. Here we report on artifact assemblages comparable to western Eurasian Middle Paleolithic (Mousterian) at Jinsitai, a cave site in North China. The lithic industry at Jinsitai appeared at least 47–42 ka and persisted until around 40–37 ka. These findings expand the geographic range of the Mousterian-like industries at least 2000 km further to the east than what has been previously recognized. This discovery supplies a missing part of the picture of Middle Paleolithic distribution in Eurasia and also demonstrates the makers' capacity to adapt to diverse geographic regions and habitats of Eurasia. [ABSTRACT FROM AUTHOR]

The aim of this paper is to apply a previously published method (Bargalló and Mosquera, 2014) to the archaeological record, allowing us to identify the hand laterality of our ancestors and determine when and how this feature, which is exhibited most strongly in humans, appeared in our evolutionary history. The method focuses on identifying handedness by looking at the technical features of the flakes produced by a single knapper, and discovering how many flakes are required to ascertain their hand preference. This method can potentially be applied to the majority of archaeological sites, since flakes are the most abundant stone tools, and stone tools are the most widespread and widely-preserved remains from prehistory. For our study, we selected two Spanish sites: Gran Dolina-TD10.1 (Atapuerca) and Abric Romaní (Barcelona), which were occupied by pre-Neanderthal and Neanderthal populations, respectively. Our analyses indicate that a minimum number of eight flakes produced by the same knapper is required to ascertain their hand preference. Even though this figure is relatively low, it is quite difficult to obtain from many archaeological sites. In addition, there is no single technical feature that provides information about handedness, instead there is a combination of eight technical features, localised on the striking platforms and ventral surfaces. The raw material is not relevant where good quality rocks are used, in this case quartzite and flint, since most of them retain the technical features required for the analysis. Expertise is not an issue either, since the technical features analysed here only correlate with handedness (Bargalló and Mosquera, 2014). Our results allow us to tentatively identify one right-handed knapper among the pre-Neanderthals of level TD10.1 at Gran Dolina (Atapuerca), while four of the five Neanderthals analysed from Abric Romaní were right-handed. The hand preference of the fifth knapper from that location (AR5) remains unclear. [ABSTRACT FROM AUTHOR]

With its well-preserved archaeological and environmental records, Aghitu-3 Cave permits us to examine the settlement patterns of the Upper Paleolithic (UP) people who inhabited the Armenian Highlands. We also test whether settlement of the region between ∼39–24,000 cal BP relates to environmental variability. The earliest evidence occurs in archaeological horizon (AH) VII from ∼39–36,000 cal BP during a mild, moist climatic phase. AH VI shows periodic occupation as warm, humid conditions prevailed from ∼36–32,000 cal BP. As the climate becomes cooler and drier at ∼32–29,000 cal BP (AH V-IV), evidence for occupation is minimal. However, as cooling continues, the deposits of AH III demonstrate that people used the site more intensively from ∼29–24,000 cal BP, leaving behind numerous stone artifacts, faunal remains, and complex combustion features. Despite the climatic fluctuations seen across this 15,000-year sequence, lithic technology remains attuned to one pattern: unidirectional reduction of small cores geared towards the production of bladelets for tool manufacture. Subsistence patterns also remain stable, focused on medium-sized prey such as ovids and caprids, as well as equids. AH III demonstrates an expansion of social networks to the northwest and southwest, as the transport distance of obsidian used to make stone artifacts increases. We also observe the addition of bone tools, including an eyed needle, and shell beads brought from the east, suggesting that these people manufactured complex clothing and wore ornaments. Remains of micromammals, birds, charcoal, pollen, and tephra relate the story of environmental variability. We hypothesize that UP behavior was linked to shifts in demographic pressures and climatic changes. Thus, by combining archaeological and environmental data, we gain a clearer picture about the first UP inhabitants of the Armenian Highlands. [ABSTRACT FROM AUTHOR]

This study presents the earliest evidence of long-distance obsidian transport at the ∼200 ka Sibilo School Road Site (SSRS), an early Middle Stone Age site in the Kapthurin Formation, Kenya. The later Middle Pleistocene of East Africa (130–400 ka) spans significant and interrelated behavioral and biological changes in human evolution including the first appearance of Homo sapiens . Despite the importance of the later Middle Pleistocene, there are relatively few archaeological sites in well-dated contexts ( n < 10) that document hominin behavior from this time period. In particular, geochemically informed evidence of long-distance obsidian transport, important for investigating expansion of intergroup interactions in hominin evolution, is rare from the Middle Pleistocene record of Africa. The SSRS offers a unique contribution to this small but growing dataset. Tephrostratigraphic analysis of tuffs encasing the SSRS provides a minimum age of ∼200 ka for the site. Levallois points and methods of core preparation demonstrate characteristic Middle Stone Age lithic technologies present at the SSRS. A significant portion (43%) of the lithic assemblage is obsidian. The SSRS obsidian comes from three different sources located at distances of 25 km, 140 km and 166 km from the site. The majority of obsidian derives from the farthest source, 166 km to the south of the site. The SSRS thus provides important new evidence that long-distance raw material transport, and the expansion of hominin intergroup interactions that this entails, was a significant feature of hominin behavior ∼200 ka, the time of the first appearance of H. sapiens , and ∼150,000 years before similar behaviors were previously documented in the region. [ABSTRACT FROM AUTHOR]

In the context of the Western European Acheulean Project, this study aims to characterize Acheulean technology in Western Europe through the analysis of handaxes and cleavers from 10 key sites (Britain 4, France 4, and Spain 2) to acquire a regional view of the occupation. The historically different systems used to categorize and analyze the data have made it difficult to compare results. Here we apply a unified and simple method (Western European Acheulean Project) that combines the traditional technological and metrical analysis of assemblages containing handaxes and cleavers with an in-depth geometric morphometric approach using three-dimensional models. This approach allows us to achieve a regional interpretation that identifies innovations through time and shaping strategies across the area. Our findings indicate the existence of two main technological groups in the sampled record: 1) northwestern and central France and Britain, from MIS 17/16 to MIS 11, and 2) Atlantic edge (Atapuerca in Spain and Menez-Dregan in France), from MIS 12/11 to MIS 8. Based on our technological analysis, the shaping of handaxes and cleavers was developed through time as a continuum of accumulative actions, with longer and more complex shaping strategies over time. Shaping technology shows traditions of manufacture over both time and geographical areas, which suggest cultural diffusion. Our geometric morphometric analysis further helped to identify not only general trends but also local adaptations in handaxe forms. Based on our findings, there were no apparent sudden innovations, but rather the application and development of specific techniques to refine size and shape. [ABSTRACT FROM AUTHOR]

The Levantine Early Upper Paleolithic (ca. 45–30 ka) has been a focus of research because of its unique position as a conduit of human, flora, and fauna species between Africa and Eurasia. Studies have mainly focused on the Early Ahmarian and Levantine Aurignacian, two entities, the former endemic and the latter foreign, which are considered to have coinhabited the region during that period. However, other cultural entities, such as the Atlitian in the Mediterranean region and the Arkov-Divshon in the arid regions of the southern Levant received less attention, and accordingly, suffer from broad definitions and chronological insecurity. These cultures hold potential insights regarding nuanced adaptations, reciprocal influences, and diachronic assimilation processes. The recently discovered site of Nahal Rahaf 2 Rockshelter in the Judean Desert provides integral information on one of these entities—the Arkov-Divshon. Two excavation seasons revealed a sequence of archaeological layers, with lithic assemblages in which laterally carinated items were prominent. Alongside rich faunal assemblages, other components of the material culture include perforated marine shells and bone tools, marking the first association of these elements with Arkov-Divshon and implying some degree of contact with the Mediterranean regions of the Levant. Good preservation of organic materials allowed radiocarbon dating of the human occupation at the site to ca. 37.5–34.0 ka cal BP, indicating chronological overlap with the Levantine Aurignacian, and possibly also with the latest phases of the Early Ahmarian. Thus, challenging the validity of the widely accepted 'Two Tradition' Model of the Levantine Upper Paleolithic. Lithic analyses suggest the use of one main reduction sequence and the primary production of bladelets from carinated items. Faunal remains suggest targeted hunting of ibex and gazelle. Botanical remains and sedimentary analyses suggest roughly similar environmental conditions, with a possible woodier environment in the surroundings of the site. [ABSTRACT FROM AUTHOR]

The three main types of tanged flint arrowheads (A, B, and C) characteristic of the Neolithic Pitted Ware hunter, fisher and gatherers of southwestern Scandinavia are traditionally viewed as chronological conditioned. However, recent studies have shown their simultaneity during the early 3rd millennium BC. Based on a study of more than 1500 arrowheads from Denmark and western Sweden, this paper explains the stylistic variation of the Pitted Ware arrowheads as functional determined representing two main categories: relatively short and wide hunting arrowheads (type A) and long and slender war arrowheads (type C). Type B represents a multifunctional group of arrowheads that mixes features from type A and C. Furthermore, diverging production schemes ( schema opératoire ) used for the shaping of hunting arrowheads has helped to identify social groupings within the larger southwestern Scandinavian Pitted Ware complex and contact across the Kattegat during the Middle Neolithic. [ABSTRACT FROM AUTHOR]

This study utilises geochemical provenancing of silcrete raw materials, in combination with chaîne opératoire analyses, to explore lithic procurement and behavioural patterns in the northern Kalahari Desert during the Middle Stone Age (MSA). New data from the sites of Rhino Cave, Corner Cave, and ≠Gi in northwest Botswana, combined with earlier results from White Paintings Shelter, reveal that the long distance transport of silcrete for stone tool manufacture was a repeated and extensively used behaviour in this region. Silcrete was imported over distances of up to 295 km to all four sites, from locations along the Boteti River and around Lake Ngami. Significantly, closer known sources of silcrete of equivalent quality were largely bypassed. Silcrete artefacts were transported at various stages of production (as partially and fully prepared cores, blanks, and finished tools) and, with the exception of ≠Gi, in large volumes. The import occurred despite the abundance of locally available raw materials, which were also used to manufacture the same tool types. On the basis of regional palaeoenvironmental data, the timing of the majority of silcrete import from the Boteti River and Lake Ngami is constrained to regionally drier periods of the MSA. The results of our investigation challenge key assumptions underlying predictive models of human mobility that use distance-decay curves and drop-off rates. Middle Stone Age peoples in the Kalahari appear to have been more mobile than anticipated, and repeatedly made costly choices with regard to both raw material selection and items to be transported. We conclude that (i) base transport cost has been overemphasised as a restrictive factor in predictive models, and (ii) factors such as source availability and preference, raw material quality, and potential sociocultural influences significantly shaped prehistoric landscape use choices. [ABSTRACT FROM AUTHOR]

Transitional moments in prehistory are of broad interest in archaeology. Immediately following the Last Glacial Maximum, two technological shifts occurred in SW Europe: in France, at ∼18,000 uncal. BP, an industry characterized by large Solutrean projectiles was replaced by the well-defined Badegoulian industry; a thousand years later in Vasco-Cantabrian Spain, Solutrean technologies were gradually replaced by Magdalenian antler point ( sagaie ) and lithic inset composite weapons. The Solutrean–Magdalenian transition remains ill-defined in Vasco-Cantabria, where very few “transitional” assemblages dating to the c. 17–16,000 uncal. BP interval have been identified, leaving questions as to how the changes occurred and what kinds of relationships existed between French and Spanish groups during this period. Urtiaga cave (Guipúzcoa) Level F (17,050 ± 140 uncal. BP) contributes a new Initial Magdalenian archaeological sample to the discussion of Last Glacial behavioral change during a technological transition. This paper synthesizes the results of a detailed lithic analysis with findings from previous studies of fauna and osseous industry from Urtiaga Level F. Then, the analysis explores Initial Magdalenian organizational behaviors through a series of lithic procurement/mobility models that show dynamic land use in eastern Vasco-Cantabria. Finally, Urtiaga Level F was compared to four other Initial Magdalenian occupations in the region, demonstrating that lithic maintenance—in manufacture, use, and rejuvenation—was a significant factor in how Initial Magdalenian groups organized their landscape-level behavioral strategies. The archaeological assemblages from Urtiaga cave are important contributions to archaeological questions surrounding the Solutrean–Magdalenian transition, providing further evidence for in situ technological change in Vasco-Cantabria. Additionally, the economic analyses discussed in this paper provide new attributes that archaeologists can use to identify Initial Magdalenian sites on the landscape. This study develops a methodological procedure that is broadly applicable to archaeological studies related to prehistoric cultural transitions and to those studies that apply data from collections recovered during the early 20th century to modern interpretive frameworks. [ABSTRACT FROM AUTHOR]

Economic growth is rarely examined for ancient states and empires despite its prominence as a topic in modern economies. The concept is debated, and many measures of growth are inaccessible for most of the ancient world, such as gross domestic product (GDP). Scholars generally have been pessimistic about ancient economic growth, but expectations derived from dramatic growth in modern economies can lead to overlooking important evidence about economic change in the past. The measure of economic growth that we adopt focuses on the economic well-being of ordinary households. We evaluate one domain of evidence: imported obsidian implement consumption in the coastal lowlands of Mesoamerica. We situate the obsidian study against a backdrop of ideas concerning economic growth in ancient societies because such topics have received only modest attention for Mesoamerica. For the major Mesoamerican ceramic periods, we (1) display the already-known early technological shift in predominant techniques of obsidian implement production—from percussion and bipolar flakes to prismatic pressure blades—that led to more efficient tool production for long-distance trade, (2) note other lithic technological improvements, and (3) evaluate increased obsidian access with a growing market system in the last centuries of the prehispanic record. [ABSTRACT FROM AUTHOR]

The main goal of this work is to illustrate the interpretative potential of regionally oriented tool-use-life approaches to infer patterns of mobility, occupational intensity, and assemblage formation processes. We apply a wide reduction analysis to 15 Late Upper Paleolithic lithic assemblages. We perform an exploratory data analysis to observe reduction intensity tendencies among the different assemblages, and we characterize reduction distribution patterns using Weibull probability distribution functions. To avoid sampling effects, resampling and bootstrapping were performed. The Weibull profiles of the analyzed data show different degrees of occupational intensity and/or length that are not observable through the classical techno-typological approaches. A referential reduction space is also simulated to create a frame to interpret our results in a more absolute scale. [ABSTRACT FROM AUTHOR]

The lithic assemblage of the Pont-de-Lavaud site (Indre, France) shows a technical choice within the Lower Pleistocene European Mode 1 sites, which is defined by the widespread use of the bipolar-on-anvil knapping technique. Although it is traditionally considered an expedient percussion method, in this lithic assemblage a selective technical behavior regarding the reduction methods and raw material is identified. In this respect, different knapping methods are applied in accordance with a combination of the percussion axis and the recurrence of the reduction series. These features are also observed in the archaeological record from other Lower and Middle Pleistocene sites, which are discussed in the text. The role of this knapping technique in the hominin technology is, in our opinion, greater than previously believed. Its implementation cannot be considered as proof of opportunistic or expedient activities. The bipolar-on-anvil technique is applied in different contexts, on different raw materials and as a technical choice or gesture in the reduction sequences. Because of its low technical requirements, it can be considered as a successful technological strategy for overcoming raw material constraints for producing some specific types of pieces. Its ubiquitous presence, both from a diachronic and geographical point of view, is proof of its considerable technical versatility and, hence, of Mode 1 hominin technological flexibility and capabilities. [ABSTRACT FROM AUTHOR]

The Gademotta and Kulkuletti site complex, located in the central part of the Main Ethiopian Rift, is known to be one of the richest early Middle Stone Age (MSA) sequences in East Africa. The technological assessment of three main sites provides evidence of major changes in the production of convergent tools over a period from before 280 ka (thousands of years ago) to ca. 100 ka. Important diachronic changes are identified in the manufacturing process of convergent tools, by shaping or retouching of predetermined points, and in the core reduction process that produced the corresponding blanks. These are: 1) the development of specific Levallois methods for the production of points (classical Levallois point production and Nubian type 1 core reduction); and 2) the shift from uni-bifacial invasive shaping of convergent tools to localized slight retouch of predetermined points. These technological changes in convergent tool production reveal the gradual emergence of a new set of technological behaviors that can be considered specific to the MSA. While the eastern African MSA is often considered as stable over time with minimal innovation, our results provide an insight into local behavioral mechanisms that have given rise to changes in technological systems during the early MSA. [ABSTRACT FROM AUTHOR]

Within the various archaeological horizons in Schöningen, the presence of hominins is repeatedly demonstrated by the recovery of stone artifacts, broken bones, and bones with cut marks. The Spear Horizon, 13 II–4, with its ca. 1500 stone artifacts and ca. 12,000 faunal remains, represents by far the richest archaeological layers in Schöningen. Systematic waterscreening over a period of 15 years has fostered the recovery of numerous small flakes that otherwise would have remained undetected. Based on the stone artifacts published by H. Thieme and the lithic artifacts recovered from the ongoing excavations of the University of Tübingen and the Archaeological Heritage Office of Lower Saxony since 2008, we present here the main aspects of these lithic assemblages. The main features of the lithic assemblages recovered from the different find horizons and concentrations provide a consistent signature, suggesting a robust and repetitive technological strategy. The assemblages, which are made of local, high quality flint, lack handaxes and are clearly not related to the Acheulean. Intensely retouched scrapers, as well as denticulates, notched pieces, and points on thick flakes, angular debris, and non-anthropogenic thermal spalls are the most numerous retouched forms. The assemblages also contain a smaller number of thinner forms. Reduction sequences are short and Levallois technology is absent. Although some of the retouched forms are reminiscent of the Middle Paleolithic, the relatively non-standardized short reduction sequences technically oriented toward the production of thick and broad flakes are consistent with a classification in the late Lower Paleolithic. [ABSTRACT FROM AUTHOR]

The Lower Paleolithic locality of Schöningen 13 II-4 is famous for the discovery of wooden spears found amongst the butchered remains of numerous horses and other large herbivores. Although the spears have attracted the most interest, other aspects of the associated artifact assemblage have received less attention. Here we describe an extraordinary assemblage of 88 bone tools from the ‘Spear Horizon.’ This sample includes numerous long-bone shaft fragments (mostly of horse), three ribs used as ‘retouchers’ to resharpen flint tools, and a complete horse innominate that was used as an anvil in bipolar knapping. Most of the retouchers were prepared by scraping the diaphysis of fresh and dry long-bones. Technological analysis of the associated lithic assemblage demonstrates exhaustive resharpening to maintain functional cutting edges. Whereas the flint tools were brought to the site, curated, and maintained, the retouchers had a shorter use-history and were either discarded after a limited period or broken to extract marrow. Horse and bison metapodials with flaked and rounded epiphyses are interpreted as hammers used to break marrow bones. Several of the ‘metapodial hammers’ were additionally used as knapping percussors. These constitute the earliest evidence of multi-purpose bone tools in the archeological record. Our results highlight the advanced knowledge in the use of bones as tools during the Lower Paleolithic, with major implications for understanding aspects of non-lithic technology and planning depth in early hominins. [ABSTRACT FROM AUTHOR]

This paper emphasises sub-regional variation in the timing and nature of subsistence changes in the New Guinea Highlands at the Pleistocene–Holocene transition. An analysis of the Kiowa lithic assemblage was used to examine the interplay between tool technology, mobility levels, and subsistence strategies by investigating changes in the procurement, manufacture, and use of different raw stone materials in an overall lithic technology. Throughout Kiowa’s occupation local stone was used extensively, and over time people increased their knowledge of the local lithic landscape, using more diverse local raw materials. Since the terminal Pleistocene, people carried reliable polished axes for a variety of activities and made expedient use of locally abundant river pebbles, while smaller nodules were located and carried as mobile toolkits to facilitate longer distance hunting and collecting excursions. In the mid Holocene exotic raw materials were also traded from more distant zones. The abandonment of Kiowa in the late Holocene shows that hunting became less economically important as cultivation developed in the area. Technological changes, in combination with changes in faunal remains are suggestive of increasing activity at Kiowa through the Holocene as the site became specialised for bat hunting, perhaps driven by restricted land use and reduced mobility, reciprocally affected by increasing populations and the intensification of plant food production in the Highlands generally. Despite this, evidence for changes to horticulture around Kiowa itself, in the Chimbu area, is limited to the mid-late Holocene, indicating that the early development of agriculture in the Wahgi may have been relatively localised, and did not necessarily displace existing subsistence strategies elsewhere in the Highlands. [ABSTRACT FROM AUTHOR]

Across Europe the period 45–40 ka (thousands of years ago) is associated with several technological changes, including the emergence of the Châtelperronian technocomplex in France and northern Spain. The Châtelperronian, stratigraphically located between the Mousterian and Aurignacian, is characterized by Upper Palaeolithic features, such as volumetric blade reduction, curved backed blades, end-scrapers, bladelets, bone tools and ornaments. Concurrently, repeated, though debated, associations with Neanderthal remains and Mousterian elements suggest a local technological development. Following recent critiques and cumulating technological studies, this paper provides data-driven contextualisations of the Châtelperronian and late Mousterian archaeological records and a primary comparative assessment of a major linking element, backed knives, to re-assess the origin of the Châtelperronian. The results demonstrate the challenging nature of the 50–35 ka record, with many interpretive problems caused by poorly recorded excavations, resulting in only 25 well-contextualised assemblages from the claimed 143 Châtelperronian find spots. These 25 assemblages facilitate more detailed chronostratigraphic and typo-technological assessments and show that the Châtelperronian has a homogenous set of technologies and tools. A similar evaluation of the late Mousterian indicates a wide-ranging late Neanderthal skill set, commonly including laminar blank production and backing. Further, conceptual similarities were noted both in blank selection and edge modification between Mousterian and Châtelperronian backed knives, alongside their near-absence in other, contemporaneous technocomplexes. A Europe-wide contextualisation shows that while the current coarse-grained record still allows for several potential scenarios, the data throughout this paper point towards a most parsimonious model of a Châtelperronian made by Neanderthals, with roots in the late Middle Palaeolithic technological skill set. However, this change seems triggered by early arrivals of modern humans either indirectly, through stimulus diffusion, or directly, after ca. 42 ka. Fully testing this model requires an ongoing focus on site formation and assemblage integrity, alongside in-depth analyses of recently excavated assemblages and existing collections. [ABSTRACT FROM AUTHOR]

Published ages of >50 ka for occupation at Madjedbebe (Malakunanja II) in Australia's north have kept the site prominent in discussions about the colonisation of Sahul. The site also contains one of the largest stone artefact assemblages in Sahul for this early period. However, the stone artefacts and other important archaeological components of the site have never been described in detail, leading to persistent doubts about its stratigraphic integrity. We report on our analysis of the stone artefacts and faunal and other materials recovered during the 1989 excavations, as well as the stratigraphy and depositional history recorded by the original excavators. We demonstrate that the technology and raw materials of the early assemblage are distinctive from those in the overlying layers. Silcrete and quartzite artefacts are common in the early assemblage, which also includes edge-ground axe fragments and ground haematite. The lower flaked stone assemblage is distinctive, comprising a mix of long convergent flakes, some radial flakes with faceted platforms, and many small thin silcrete flakes that we interpret as thinning flakes. Residue and use-wear analysis indicate occasional grinding of haematite and woodworking, as well as frequent abrading of platform edges on thinning flakes. We conclude that previous claims of extensive displacement of artefacts and post-depositional disturbance may have been overstated. The stone artefacts and stratigraphic details support previous claims for human occupation 50–60 ka and show that human occupation during this time differed from later periods. We discuss the implications of these new data for understanding the first human colonisation of Sahul. [ABSTRACT FROM AUTHOR]

This paper re-examines lithic technological variability of the Early Ahmarian, one of the early Upper Palaeolithic cultural entities in the Levant, which has often been regarded as a precursor of the Protoaurignacian (the early Upper Palaeolithic in Europe) in arguments for the occurrence of a cultural spread in association with the dispersal of Homo sapiens from the Levant to Europe. Using quantitative data on several lithic techno-typological attributes, we demonstrate that there is a significant degree of variability in the Early Ahmarian between the northern and southern Levant, as previously pointed out by several researchers. In addition, we suggest that the technology similar to the southern Early Ahmarian also existed in the northern Levant, i.e., the Ksar Akil Phase 4 group (the KA 4 group), by introducing new Upper Palaeolithic assemblages from Wadi Kharar 16R, inland Syria. We then review currently available stratigraphic records and radiocarbon dates (including a new date from Wadi Kharar 16R), with special attention to their methodological background. As a result, we propose alternative chronological scenarios, including one that postulates that the southern Early Ahmarian and the KA 4 group appeared later than the northern Early Ahmarian with little or no overlap. On the basis of the alternative scenarios of chronological/geographical patterns of the Early Ahmarian variability, we propose four possible relationships between the Protoaurignacian and the Early Ahmarian, including a new scenario that the appearance of the Protoaurignacian preceded those of similar technological entities in the Levant, i.e., the southern Early Ahmarian and the KA 4 group. If the last hypothesis is substantiated, it requires us to reconsider the model of a Levantine origin of the Protoaurignacian and its palaeoanthropological implications. [ABSTRACT FROM AUTHOR]

This paper presents the lithic assemblages documented at Sima del Elefante (TE) and their importance in the context of the Early and Middle Pleistocene human occupation of Europe. We also study changes in human behaviour within the context of the palaeoenvironmental evolution of the Sierra de Atapuerca. This site has characteristics that are of great value for the study of human evolution. The lower levels of TE (Units TE7–TE14) are an essential reference for understanding the early stages of the colonization of Europe. The TE9c level has provided stone tools (Mode 1), faunal remains, and human fossils dated to 1.22 Ma (millions of years ago). Moreover, this is one of the few European sites with a stratigraphic sequence that includes remains of human occupations predating the Jaramillo subchron (Early Pleistocene) and from the Late Middle Pleistocene (Units TE18–TE19). Despite this, the presence of archaeologically sterile units (TE15–17) prevents us from establishing a continuous relationship between the Early and Middle Pleistocene human settlements and, consequently, between their technological and behavioural differences. We can, however compare the technological and palaeoeconomic strategies adopted by different species of hominins during two key phases of the occupation of Europe. [ABSTRACT FROM AUTHOR]

Microwear analysis is applied to reconstruct the function and social organisation at the Late Glacial site of Trollesgave, Denmark. As with Bromme Culture sites in general, the lithic assemblage consists of primarily three types of tools. There is a strong association between these types and their use: end scrapers for dry hide scraping; burins for working hard material, primarily bone; and tanged points primarily for projectile tips. Nearly all divergence from this pattern can be referred to as the activities of children, the products and workshops of which have previously been identified. Based on the combined information from microwear analysis, flint knapping and spatial distribution of artefacts, the assemblage is inferred as the traces of a single family hunting (and fishing) occupation. [ABSTRACT FROM AUTHOR]

The Palaeolithic of southern Central Europe has a long history of archaeological research. Particularly, the presence of numerous osseous projectile points in many early Upper Palaeolithic (EUP) assemblages in this region has attracted the attention of the international research community. However, the scarcity of properly identified and well-dated Aurignacian contexts represents an obstacle for investigation of the nature and timing of the Middle to Upper Palaeolithic transition. In this context, the question of whether Neandertals made Aurignacian osseous projectile points, either on their own or as a consequence of cultural interaction with anatomically modern humans (AMH), still remains an open issue. Here we reassess the EUP record of Slovenia by evaluating the Aurignacian character of the assemblages from Potočka zijalka, Mokriška jama and Divje babe I in the light of their suggested roots in the local Mousterian. We provide a comprehensive description of the lithic industry from Potočka zijalka, which represents one of the rare EUP assemblages of southern Central Europe with a representative number of lithic artefacts to be analysed from the perspective of lithic technology and raw material economy. Our re-analysis of the Slovenian assemblages is backed by a series of 11 new ultrafiltered collagen 14C dates obtained directly on associated osseous projectile points from the studied assemblages. The Aurignacian of Potočka zijalka underlines the remarkable consistency of the Early Aurignacian with low typo-technological variability across Europe, resulting from a marked dependence on transported toolkits and raw material conservation. The new radiocarbon determinations for the Aurignacian of Slovenia appear to post-date the 34–32 ka BP (thousands of years before present) threshold for the last Neandertals in the region. Although not falsified, the hypothesis of Aurignacian bone tools in southern Central Europe as a product of late Neandertals is not supported by our re-examination of the EUP record of Slovenia. [ABSTRACT FROM AUTHOR]

This study tests how well the ITMC (Initial-/Terminal-Mass Comparison) method of Clarkson and Hiscock (2011) measures reduction specifically on blades, a largely overlooked flake type in reduction measures. We demonstrate the utility of using platform area to model the extent of reduction on retouched blades. The platform areas of 124 blades were accurately measured in three dimensions using a digital scanner. A positive relationship was observed between 3D platform area and blade mass, with greater platform areas being associated with greater masses. Multivariate regression was used to strengthen the relationship between platform area and initial mass by isolating the variables of platform, termination and indentor type as well as external platform angle. As was proposed by Clarkson and Hiscock (2011), reduction intensity can be estimated by predicting initial blade mass from the relationship between platform area and mass, and comparing this to the observed mass of a retouched blade. Our analysis returned some surprising results that raise questions about the operation of fracture mechanics, particularly for punch blades and those with focalised platforms, and the suitability of the ITMC as a holistic method of flake reduction analysis. [ABSTRACT FROM AUTHOR]

Transformation in technological patterns associated with the Middle-to-Upper Palaeolithic transition between 50 and 40 ka in Western Europe and their relationship with the Neanderthal and Anatomically Modern Human populations and behaviors are issues that continue to stimulate heated debate. In this article we use the Middle and Early Upper Palaeolithic archaeo-stratigraphic record from the Bordes-Fitte rockshelter (les Roches d'Abilly site, Central France), a Bayesian analysis of the ages obtained by accelerator mass spectrometry radiocarbon on ultrafiltered collagen and by luminescence on quartz and feldspar grains, to establish a timeline for material culture and sedimentary dynamic changes during the Middle-to-Upper Palaeolithic transition. Technology, refitting studies and taphonomy of lithic artifacts recovered in the geoarchaeological field units D1 and D2 permit to characterize 3 reduction strategies (Levallois, Discoidal and Châtelperronian blade) that took place between the cold Heinrich events 5 and 4. We discuss the implications of the results to characterize the end of the Middle Palaeolithic, and for distinguishing anthropogenic and non-anthropogenic factors in Middle-to-Upper Palaeolithic assemblage's variability. [ABSTRACT FROM AUTHOR]

The significant development of predetermined flake technologies marks the beginning of the Middle Paleolithic in Europe. This phenomenon is not only expressed by the increase in the Levallois methods, but it also includes a diversity of other flaking methods, e.g. micro-Levallois, Kombewa, truncated-faceted and Le Pucheuil, often related to secondary reduction sequences. The tool management and use patterns they fulfill are still largely unknown due to the scarcity of use-wear analyses, whereas their technological characteristics are well defined. In this paper we present a combined technological and functional study of Le Pucheuil-type flakes (Delagnes, 1993), from the eponymous Early Middle Paleolithic site of Le Pucheuil (northwestern France). The technical investment during the reduction sequence is relatively low but flaking is nevertheless guided by specific and constant technical rules which result in the production of predetermined flakes. These flakes share common morphotechnical attributes: an acute, straight or slightly curved, distal edge opposed to a robust and wide proximal area. The use-wear analysis shows that this morphology was clearly sought after insofar as the distal acute edges were used as working edges while the proximal edges served as prehensile areas. Despite their similarity, Le Pucheuil-type flakes were used for a variety of tasks, including butchery but also hide scraping, wood and non-woody plant working. Tool management suggests that their production responded to deferred and/or collective uses. Our combined approach points to: 1. the high degree of elaborateness and flexibility of the tool management strategies developed in the Early Middle Paleolithic in Europe, 2. the presence of long-lasting and multi-activity occupations in an open-air context during the harsh environmental conditions at the beginning of the penultimate glaciation (OIS 6). The results finally show the great potential of combined technological/functional approaches to lithic assemblages as a way to refine our understanding of the technical, social and economical organization of Neanderthal hunter-gatherers, most specifically in contexts where lithics are the only preserved materials. [ABSTRACT FROM AUTHOR]

The role and significance of the Arabian Peninsula in modern human dispersals out of Africa is currently contentious. While qualitative observations of similarities between Arabian Middle Palaeolithic and African Middle Stone Age (MSA) assemblages have been made, these inferences remain untested and often situated within overly broad dichotomies (e.g., ‘Africa’ versus the ‘Levant’), which distort concepts of geographic scale and subsume local variability. Here, we quantitatively test the hypothesis that assemblages from Jubbah, in the Nefud Desert of northern Saudi Arabia are similar to MSA industries from northeast Africa. Based on the quantitative analysis of a suite of metric and morphological data describing lithic reduction sequences, our results show that early and late core reduction at Jubbah is distinct from equivalent northeast African strategies, perhaps as a result of raw material factors. However, specific techniques of core shaping, preparation and preferential flake production at Jubbah draw from a number of methods also present in the northeast African MSA. While two Jubbah lithic assemblages (JKF-1 and JKF-12) display both similarities and differences with the northeast African assemblages, a third locality (JSM-1) was significantly different to both the other Arabian and African assemblages, indicating an unexpected diversity of assemblages in the Jubbah basin during Marine Isotope Stage 5 (MIS 5, ∼125–70,000 years ago, or ka). Along with evidence from southern Arabia and the Levant, our results add quantitative support to arguments that MIS 5 hominin demography at the interface between Africa and Asia was complex. [ABSTRACT FROM AUTHOR]

Based on the evidence of a recently excavated, sealed site, situated at Ruien “Rosalinde” in the Belgian Scheldt valley, the response of hunter-gatherers to changing climate at the transition from the temperate Allerød to the cold Younger Dryas is discussed. Radiocarbon dated to the end of the Allerød or the very beginning of the Younger Dryas, the site of Ruien provides the earliest evidence of a refined lithic technology characterized by the use of a soft stone hammer and the production of straight and regular blade(let)s from intensively prepared cores with two opposite platforms and sharp striking angles. In the course of the Younger Dryas and Early Pre-boreal this knapping method will become standard all over Europe, from the Tanged Point Technocomplex in the North to the (Epi)Laborian in the South. It contrasts sharply with the knapping style of previous lithic traditions, such as the late Federmesser/Azilian and Bromme Technocomplexes, which was much less elaborated and mainly oriented towards the knapping of short irregular blades with a hard stone hammer. This apparently abrupt technological change was also accompanied by increased raw material procurement networks, extending over up to 250 km, and a marked microlithisation of the hunting equipment. Finally, the site of Ruien is also important as it demonstrates the limited archaeological visibility of Younger Dryas sites, explaining the scarcity of such sites within western Europe. [ABSTRACT FROM AUTHOR]

This article presents the results of the technological analysis of assemblages from the sites of Alto Alegre 3, Linha Policial 1 and Linha Policial 3 in the states of Santa Catarina and Rio Grande do Sul (Brazil), dated to the Early Holocene. Alongside other reduction sequences, these sites also present sequences for exclusive blade production, described for the first time for Brazilian prehistory. Despite the lack of cores, analysis of the blades has established that: (1) blade production took place using a single method, with centripetal core initialization and unidirectional production; (2) knapping techniques by direct hard and soft percussion were both used to produce blades; and (3) the blades obtained were destined for different functions, the active part mainly lateral and sometimes used without retouch. This study presents an example of obvious technological convergence, since blade production is known in other prehistoric contexts throughout the world without historical links with that observed at the three sites analyzed here. It also shows the necessity of developing detailed technological analyses to understand the settling of South America in all its complexity. [ABSTRACT FROM AUTHOR]

Overlooked in larger European syntheses for some time, northwestern France now plays an important role in a dynamic research program investigating the very end of the Lateglacial in Western Europe. The discovery of the well-preserved open-air site of La Fosse has allowed for significant advances in our understanding of different aspects of the Younger Dryas-Holocene transition in this region. This homogenous lithic assemblage adds further precision to the Lateglacial chrono-cultural sequence and provides essential new information for investigating techno-economic changes that appeared during this period. A techno-functional study of the lithic material combined with a spatial analysis of artifact distribution provides insights concerning the site's function. Several lines of evidence also shed light on occupation duration, activities carried out on-site, and the likely composition of the groups who occupied the site. The combination of the above lead us to interpret La Fosse as a large residential site. Following this, we propose a new mobility and land-use model for hunter-gatherer groups from the Younger Dryas-Preboreal transition in which La Fosse functioned as an aggregation site. This model confirms several previous hypotheses emphasizing the logistical character of mobility strategies of these societies. Finally, this scenario adds further details and precision concerning both the status and connections between different groups of sites within a complex socio-economic system. [ABSTRACT FROM AUTHOR]

Here we present a pluridisciplinary study of Cuesta de la Bajada site (Teruel, Spain). Our findings show that the site contains an early Middle Paleolithic assemblage similar to other European early Middle Paleolithic industries, allowing us to evaluate the coexistence of this industrial tradition with the Acheulean technocomplex in southwest Europe. The process of lithic production at Cuesta de la Bajada represents a technology focused on debitage, the application of technical concepts such as ramified production sequences, and the recycling of flakes via the resharpening of tools and exhausted cores. This site was formed around a pond not far from a river and contains remains of large macrofauna other than equids and cervids. Taphonomic analysis highlights the abundance of cut marks on bones, and supports the hypothesis of selective hunting by hominids. The numerical ages derived from the combination of ESR, OSL and AAR dating methods indicate that the archaeological site was very likely formed around the MIS 8-MIS 9. The appearance of Middle Paleolithic industries in Europe could represents the autochthonous development of a technocomplex distinctly different from the Acheulean, characterised by chaînes opératoires of debitage and a progressive increase of Levallois technology and retouched tools. These results suggest that there is a clear coexistence of assemblages with Acheulean and Middle Paleolithic industries during the last third of the Middle Pleistocene at least in the Iberian Peninsula. [ABSTRACT FROM AUTHOR]

Abstract: The later Pleistocene archaeological record of southernmost Africa encompasses several Middle Stone Age industries and the transition to the Later Stone Age. Through this period various signs of complex human behaviour appear episodically, including elaborate lithic technologies, osseous technologies, ornaments, motifs and abstract designs. Here we explore the regional archaeological record using different components of lithic technological systems to track the transmission of cultural information and the extent of population interaction within and between different climatic regions. The data suggest a complex set of coalescent and fragmented relationships between populations in different climate regions through the late Pleistocene, with maximum interaction (coalescence) during MIS 4 and MIS 2, and fragmentation during MIS 5 and MIS 3. Coalescent phases correlate with increases in the frequency of ornaments and other forms of symbolic expression, leading us to suggest that population interaction was a significant driver in their appearance. [Copyright &y& Elsevier]

Abstract: The appearance of new force application techniques in the production of stone artifacts over the course of human evolution has been associated with the increasing technological capacity of hominin groups. Yet, the causal relationship between the knapping practice and the flake characteristics upon which these behavioral inferences rest remains largely untested under controlled settings. Here we present a recent controlled experiment examining the effect of various force application variables (hammer shape; location of force application; angle of blow; hammer displacement speed) on flake morphology. Results indicate that the independent variables interact with flake attributes in a complex way that makes simple analogies between particular attributes and specific force application techniques extremely difficult. However, trade-offs among the variables cast new light on the possible mechanisms underlying variation in force application techniques used in flintknapping. [Copyright &y& Elsevier]

Abstract: This study aims to understand what effect, in terms of inter-analysis variation and analyst accuracy, different raw material types have on modern technological analyses of lithic assemblages. This is done through a series of blind analysis tests undertaken on experimentally derived assemblages of cores and flakes. Novelties of our approach include the introduction of refit studies as a method to assess analyst's accuracy, and the use of statistical tests specifically designed to address inter-analyst variability, common in other disciplines but rarely used in Archaeology. The experimental assemblages were produced from raw materials collected at Olduvai Gorge, an archaeological sequence that has been a source for studies of early human technology for several decades, and where re-analyses of the same assemblages have usually offered different interpretations. The results of the blind analyses are compared to the true technological values obtained through full refit analysis of the experimental material, and suggest that there is a significant difference in terms of inter-analyst variability as well as accuracy related to different raw materials. Our paper highlights the interpretative problems posed by difficult-to-analyse raw materials such as quartzite, and stresses subjectivity present in stone-tool technological studies, which may contribute to explain differences in the interpretation of Early Stone Age lithic assemblages. [Copyright &y& Elsevier]

Highlights: [•] We examine the link between hunter–gatherer mobility and lithic raw material use. [•] A case with high mobility and low availability of good workability stone is studied. [•] Increased mobility correlates with technological informalisation in the studied case. [•] The availability of high-quality stone is low but low-workability stone is abundant. [•] The low degree of formalization is explained by lithic raw material diversification. [ABSTRACT FROM AUTHOR]

Abstract: Great Basin populations during the Pleistocene–Holocene Transition (PHT) are often characterized as being mobile and focused on wetlands; however, the factors that influenced where Paleoindians selected residential campsites are poorly understood. Using predictions derived from optimal foraging-based patch choice models and GIS reconstructions of the PHT landscape, some researchers have argued that occupations in smaller wetlands should have been shorter than occupations in larger wetlands but such arguments have rarely been evaluated using empirical data. The PHT lithic record provides an opportunity to evaluate the relationship between wetland size and occupation span by applying Kuhn's (1995) concept of technological provisioning. Kuhn expects more mobile populations to provision individuals and more sedentary populations to provision places and suggests that: (1) a strategy of provisioning individuals should be reflected by a high proportion of more extensively used artifacts made on non-local raw materials; and (2) a strategy of provisioning places should be reflected by a high proportion of less extensively used artifacts made on local raw materials. We apply the technological provisioning concept to lithic assemblages from two of the Parman localities, extensive PHT sites in the northwestern Great Basin, and compare local and nonlocal artifacts to determine if Paleoindians shifted from provisioning individuals while moving to/from the sites to provisioning the place while occupying them. There is no relationship between artifact transport distance and artifact use intensity. We interpret these findings as evidence that Paleoindians did not alter their provisioning strategies while occupying the Parman localities, likely because occupations were brief within a small wetland poorly-suited to support groups for long periods. [Copyright &y& Elsevier]

Abstract: The hafting of tools using adhesive is one of the innovative features that characterizes the southern African Middle Stone Age. This technology has mainstream implications but remains insufficiently documented, largely due to unequal organic preservation and non-adapted analytical procedures. A notable exception is provided by the recent results from the site of Sibudu (Lombard, 2006; Wadley et al., 2009). The excavation at Diepkloof Rock Shelter has revealed several lithic artifacts with a black residue distributed over their surface. Their stratigraphic distribution reveals a strict association with the Howiesons Poort (HP) and suggests a close relationship between the appearance of hafting adhesive and the appearance of blades and geometric backed tools. Macroscopic and microscopic observations attest to a hafting that was exclusively lateralized and preliminary use-wear analysis (Igreja and Porraz, in this issue) supports the hypothesis that hafted tools were mostly integrated within daily (domestic) activities. In this study, we focused specifically on a chemical study of a thick black residue found on a quartz flake attributable to the Late phase of the HP. We determine, for the first time in a MSA context, the nature of the compound adhesive and reconstruct a picture of the multilevel operations and interactions that comprise the process of hafting. The molecular analysis attests to the exploitation of Podocarpus elongatus (Yellowwood), collected in the form of a resin that was naturally dried or heated at a low temperature and possibly mixed with fragmented bone and quartz grains. Compared to Sibudu where ochre additive is documented, the hafting technology at Diepkloof introduces another level of variability within the HP tradition and suggests the existence of regional expressions and adaptations. [Copyright &y& Elsevier]

Abstract: The southern African MSA comprises a series of phases of unique technological innovations that fuel current models on the evolutionary processes of Anatomically Modern Humans. However, the nature and variability of these technological phases remain poorly documented. This study reports on the previously unpublished sequence of Diepkloof Rock Shelter (South Africa) and investigates the main technological changes therein, particularly emphasizing the emergence, succession and disappearance of the Still Bay (SB) and the Howiesons Poort (HP). We argue for technological change that occurred at different rates and under the influence of variable driving factors. Our model implies that the SB and the HP are not related to the influx of new populations but have regionally specific origins. Unlike the other techno-complexes, the HP at Diepkloof is subdivided into different phases (Early, Intermediate and Late) but only the upper phases resemble the so-called “classic” HP. Finally, the technological sequence of Diepkloof questions the homogeneous picture which has been so far assumed for the southern African MSA and places emphasis on the importance of exploring long regional sequences. [Copyright &y& Elsevier]

Abstract: New excavations at the Middle Stone Age (MSA) open-air site of Hoedjiespunt 1 (HDP1) on the west coast of South Africa advance our understanding of the evolution of coastal adaptations in Homo sapiens. The archaeological site of HDP1 dates to the last interglacial and consists of three phases of occupation, each containing abundant lithic artifacts, shellfish, terrestrial fauna, ostrich eggshell and pieces of ground ocher. The site provides an excellent case study to analyze human behavioral adaptations linked to early exploitation of marine resources. Here we reconstruct human activities through a detailed study of the lithic assemblages, combining analyses of the reduction sequences, artifact attributes and quartz fracturing. These methods provide insights into raw material procurement, lithic reduction sequences, site use and mobility patterns, and foster comparison with other MSA coastal sites. The main characteristics of the lithic assemblages remain constant throughout the use of the site. Quartz dominates silcrete and other raw materials by almost four to one. Knappers at HDP1 produced different forms of flakes using multiple core reduction methods. Denticulates represent the most frequent tool type. The assemblages document complete, bipolar and hard hammer reduction sequences for the locally available quartz, but highly truncated reduction sequences with many isolated end products for silcrete, a material with a minimum transport distance of 10–30km. This observation suggests that well provisioned individuals executed planned movements to the shoreline to exploit shellfish. Our excavations at HDP1 furthermore demonstrate the simultaneous occurrence of flexible raw material use, anticipated long-distance transport, systematic gathering of shellfish and use of ground ocher. The HDP1 lithic assemblages document a robust pattern of land-use that we interpret as a stable adaptation of modern humans to coastal landscapes as early as MIS 5e. [Copyright &y& Elsevier]

Abstract: The Hogeye Clovis cache is comprised of 52 late-stage bifaces, finished points, and knife/cores cached in central Texas. Because these artifacts were all likely made and cached approximately 13,000 years ago by one or a handful of knappers belonging to a single band with a shared Clovis cultural template, Hogeye provides a rare opportunity to investigate Clovis lithic reduction signatures. This paper builds on previous analyses and presents new methods for quantifying Clovis biface production signatures, including serial flaking and the timing of last overshot flaking. The results show that the Hogeye cache bifaces technologically and morphologically differ from other regional Clovis biface reduction signatures. Additional data is needed to determine whether these differences reflect individual knapping preferences or regional cultural signatures. The methods used and developed here are not Clovis-specific and could be modified and combined with other analytical techniques to identify reduction signatures in biface assemblages from other times and places. [Copyright &y& Elsevier]

Abstract: Technological and morphological variability in lithic artifacts is commonly used to identify taxonomic entities in Paleolithic research contexts. Assemblages are mainly studied using either linear distance measurements or qualitative assessments of morphologies. Here, we present a method to quantify morphological variability in lithic artifacts using 3D models of stone artifacts. Our study on the sequence of the Upper Paleolithic layers V–I from the site Yabroud II in western Syria, demonstrates that utilizing 3D models provides a new insight into the variability of lithic technologies. We use quantitative data on convexities, twist and scar patterns on cores and blades, attributes previously not readily quantifiable, to trace technological change through the archaeological sequence. We are able to identify differences and translate these findings into a grouping of the layers. While layers VI–II are characterized by technological continuity and were grouped together, layers V and I can be separated from this group and represent technologically different groups chronologically before and after. Our results demonstrate the potential of 3D models for studying morphological variability in lithic assemblages. [Copyright &y& Elsevier]