Search

A new scheme is proposed to enhance the conversion efficiency (CE) of soft x-rays (0.1–1.5 keV) generated by irradiating a double-gold-foil target using double laser pulses to collide gold plasmas. A detailed analysis of the hydrodynamic evolution of the colliding plasmas is performed by using one-dimensional radiation hydrodynamic simulations. The results show that the total soft x-ray CE can be enhanced up to 71.5% by setting the foil thickness as d1 = 0.3 μm, and this is 14.5% higher than that for a single laser irradiating a single-gold-foil target. Most of the enhanced soft x-ray CEs are generated from a stagnation layer formed by plasma collisions. Such a scheme is simple and practical, which is beneficial for their applications in astrophysical opacity calculations, inertial confinement fusion, and hydrodynamic instability analyses.

In experiments on the effect of magnetic field on electron transportation in laser–plasma interaction, the magnetic field is often produced by two coils and is mirror-like. In this paper, the transport and the reflection of fast electron beam generated in laser–plasma interaction in solid-density plasma immersed in a mirror magnetic field are studied using particle-in-cell simulation. The helicoidal motion of fast electrons in the field and the convergence of magnetic induction lines leads to the collimated transport and focusing of the fast electrons. The reflection of the fast electrons can lead to the decrease in the transmission ratio, and this reflection increases with the magnetic mirror ratio, but saturates at a certain level.

The generation and stopping of a laser-driven two-component ion beam are investigated by three-dimensional particle-in-cell simulation and an extended stopping model. It is found that a two-component ion beam with the tunable composition ratio can be obtained from the two-species-ions sandwich target interacting with a relativistic laser pulse. When the generated proton beam mixed with a certain portion of carbon ions is transporting in fully ionized dense plasma, the beam stopping power is significantly enhanced compared to a pure proton beam. The maximum penetration depth is sharply reduced, and the Bragg peak with a higher magnitude appears earlier at the end of their paths, which is beneficial for achieving more localized energy deposition. The effect of heavy ion mixing on proton beam driven fast ignition is also discussed. A simple theoretical model is established, indicating that the required ignition time is relatively delayed for a heavy-ion doping case. For a small hot-spot size, it is possible to achieve the fusion ignition for a low mixed ratio. However, it is difficult to maintain a high fuel temperature due to the growing energy loss originating from mechanical work and thermal conduction.

By using three-dimensional particle-in-cell simulations, we demonstrate that an energetic ring-shaped ion beam can be generated by an ultra-intense circularly polarized Laguerre–Gaussian laser pulse interacting with micro-structure targets. The electron and ion dynamics of three different targets including a sleeve–wire target, wire target, and common planar target are investigated. It is found that an optimized sleeve–wire target can provide a remarkable increase in the maximum ion energy and laser-to-ion energy conversion efficiency. The reason can be attributed to the matched transverse profiles between the electric-field distribution of Laguerre–Gaussian laser and sleeve–wire structure, resulting in efficient laser-target energy coupling. In fact, using a laser pulse of intensity 2.74 × 1 0 20 W/cm2, duration 66.7 fs, and energy ∼1 J, one can obtain ∼35 MeV protons, ∼5.8 MeV/u carbon ions, and ∼15% laser-to-ion energy conversion.

A scheme for generating high-flux positrons by two counter-propagating laser pulses colliding in near-critical-density plasmas is proposed, which might be realized with current laser facilities. Positrons of number 2.79 × 105 and with a maximum density of 9.63 × 1024 m−3 can be generated for a laser with an intensity of 1022 W cm−2. This is attributed to the increase in the cross sections for photon radiation and positron generation in the colliding scheme. In order to improve the positron generation, the relevant parameters are discussed in detail. This scheme will facilitate the observation of the Breit-Wheeler positrons in the laboratory.

The dynamics of electrons forming the boundary layer of a highly nonlinear laser wakefield driven in the so called bubble or blowout regime is investigated using particle-in-cell simulations. It is shown that when the driver pulse intensity increases or the focal spot size decreases, a significant amount of electrons initially pushed by the laser pulse can detach from the bubble structure at its tail, middle, or front and form particular classes of waves locally with high densities, referred to as the tail wave, lateral wave, and bow wave. The tail wave and bow wave correspond to real electron trajectories, while the lateral wave does not. The detached electrons can be ejected transversely, containing considerable energy, and reducing the efficiency of the laser wakefield accelerator. Some of the transversely emitted electrons may obtain MeV level energy. These electrons can be used for wake evolution diagnosis and producing high frequency radiation.

The acceleration of electron beams with multiple transverse structures in wakefields driven by Laguerre-Gaussian pulses has been studied through three-dimensional (3D) particle-in-cell simulations. Under different laser-plasma conditions, the wakefield shows different transverse structures. In general cases, the wakefield shows a donut-like structure and it accelerates the ring-shaped hollow electron beam. When a lower plasma density or a smaller laser spot size is used, besides the donut-like wakefield, a central bell-like wakefield can also be excited. The wake sets in the center of the donut-like wake. In this case, both a central on-axis electron beam and a ring-shaped electron beam are simultaneously accelerated. Further, reducing the plasma density or laser spot size leads to an on-axis electron beam acceleration only. The research is beneficial for some potential applications requiring special pulse beam structures, such as positron acceleration and collimation.

By using two-dimensional particle-in-cell simulations, we demonstrate high-flux dense positrons generation by irradiating an ultra-intense laser pulse onto a tapered hollow target. By using a laser with an intensity of 4 × 1023 W/cm2, it is shown that the Breit-Wheeler process dominates the positron production during the laser-target interaction and a positron beam with a total number >1015 is obtained, which is increased by five orders of magnitude than in the previous work at the same laser intensity. Due to the focusing effect of the transverse electric fields formed in the hollow cone wall, the divergence angle of the positron beam effectively decreases to ∼15° with an effective temperature of ∼674 MeV. When the laser intensity is doubled, both the positron flux (>1016) and temperature (963 MeV) increase, while the divergence angle gets smaller (∼13°). The obtained high-flux low-divergence positron beam may have diverse applications in science, medicine, and engineering.

A scheme for enhancing the electron injection charge in a laser-driven bubble acceleration is proposed. In this scheme, a thin foil target is placed in front of a gas target. Upon interaction with an ultra-intense laser pulse, the foil emits electrons with large longitudinal momenta, allowing them to be trapped into the transmitted shaped laser-excited bubble in the gaseous plasma target. Two-dimensional particle-in-cell simulation is used to demonstrate this scheme, and an electron beam with a total electron number of 4.21×108 μm−1 can be produced, which is twice the number of electrons produced without the foil. Such scheme may be widely used for applications that require high electron yields such as positron and gamma ray generation from relativistic electron beams interacting with solid targets.

By using two-dimensional particle-in-cell simulations, we propose a scheme for strong coupling of a petawatt laser with an opening gold cone filled with near-critical-density plasmas. When relevant parameters are properly chosen, most laser energy can be fully deposited inside the cone with only 10% leaving the tip opening. Due to the asymmetric ponderomotive acceleration by the strongly decayed laser pulse, high-energy-density electrons with net laser energy gain are accumulated inside the cone, which then stream out of the tip opening continuously, like a jet. The jet electrons are fully relativistic, with speeds around 0.98−0.998 c and densities at 1020/cm3 level. The jet can keep for a long time over 200 fs, which may have diverse applications in practice.

Laser shaping of a relativistic circularly polarized laser pulse in ultra-intense laser thin-foil interaction is investigated by theoretical analysis and particle-in-cell simulations. It is found that the plasma foil as a nonlinear optical shutter has an obvious cut-out effect on the laser temporal and spatial profiles. Two-dimensional particle-in-cell simulations show that the high intensity part of a Gaussian laser pulse can be well extracted from the whole pulse. The transmitted pulse with longitudinal steep rise front and transverse super-Gaussian profile is thus obtained which would be beneficial for the radiation pressure acceleration regime. The Rayleigh-Taylor-like instability is observed in the simulations, which destroys the foil and results in the cut-out effect of the pulse in the rise front of a circularly polarized laser.