Search

This paper develops an efficient electrochemiluminescence (ECL) enhancement strategy on closed bipolar electrode for the detection of prostate specific antigen (PSA). We first synthesized a cyclometalated iridium(III) complex (pq) 2 Irbza with high ECL efficiency and used as ECL emitter in the anodic cell of BPE. While we introduced a Pt-tipped Au NRs and constructed a sandwich immune structure at the cathodic pole of BPE. Combined the signal amplification strategies of enzyme catalysis and the synergistic catalytic effect of bimetallic structure for the reduction of H 2 O 2 , the attached Pt-tipped Au NRs-GOx-Ab 2 nanocomplex as both recognition probes and signal amplification units could mediate the ECL signals of (pq) 2 Irbza/tripropylamine (TPrA) on the anodes of BPE through faradaic reaction due to the charge neutrality of BPE. Therefore, a highly sensitive BPE-ECL sensor for detection of PSA with a detection limit of 0.72 pg/mL and a linear range from 1.0 pg/mL to 10 ng/mL was obtained. This work is expected to broaden the application of iridium complex and bimetallic nanocatalyst in biological detection and could be utilized to detect many other biological molecules.

In this work, we developed a visual electrochemiluminescence (ECL) sensing platform based on a dual-bipolar electrode (D-BPE) array chip. The chip was composed of two arrays of BPEs and three separated arrays of reservoirs filled with buffer, Ru(bpy)3(2+)-TPrA and luminol solutions, respectively. Both BPEs served as ECL reporting platforms. By applying 6.0 V voltage, an array of orange electrochemiluminescence (ECL) signals belonging to Ru(bpy)3(2+) turned on. After adding DNAzyme and H2O2 in Ru(bpy)3(2+) and luminol reservoirs, the orange Ru(bpy)3(2+) signals decreased until vanished due to the quenching effect; meanwhile, a new array of blue ECL signals turned on because of the luminol-H2O2 ECL reaction. The designed D-BPE owns superior properties compared with the three-electrode system benefiting from the quantitative relation of bipolar systems, which greatly enhanced the ECL detection sensitivity. Meanwhile, the visual color-switch ECL and the ratiometric detecting principle made the results easier to evaluate and more accurate. Quantitative detection of HL-60 cancer cells from 320 cells/mL to 2.5 × 10(5) cells/mL with two linear ranges was achieved. The detection limit was down to 80 cells/mL. Finally, this D-BPE chip could distinguish the tumor cells from normal cells and provide a prospect for cancer diagnosis in a high-throughput, visual way.

This paper describes a novel electrochemiluminescence (ECL) imaging platform for simultaneous detection of cancer biomarkers based on a closed bipolar electrode (BPE) array. It consists of two separated channel arrays: detection channel array and sensing channel array, which are connected by a group of parallel ITO BPEs on a glass substrate. Besides, two parallel ITO strips are fabricated at the two sides of BPE array and employed as driving electrodes. After Au films are electrochemically deposited on the cathodes of the BPE array, nanobioprobes including biorecognition elements (aptamer or antibody) and a novel electrochemical tag, which is synthesized by doping thionine in silica nanoparticles (Th@SiO2 NPs), are introduced into the cathodes by immunoreaction or DNA hybridization. The Th@SiO2 coupled nanobioprobes as both recognition probes and signal amplification indicators could mediate the ECL signals of Ru(bpy)3(2+)/tripropylamine (TPA) on the anodes of BPE array through faradaic reaction due to the charge neutrality of BPE. Thus, multiplex detection of cancer biomarkers (adenosine triphosphate (ATP), prostate-specific antigen (PSA), α-fetoprotein (AFP) and thrombin) is realized by forming specific sensing interfaces onto the cathodic poles of BPEs in different sensing channels and reported by the ECL images of the Ru(bpy)3(2+)/TPA system on the anodic poles of BPEs in detection channels. The results demonstrate that this visual ECL platform enables sensitive detection with excellent reproducibility, which may open a new door toward the development of simple, sensitive, cost-effective, and high throughput detection methods on biochips.

Here we developed a novel hybrid bipolar electrode (BPE)-electrochemiluminescence (ECL) biosensor based on hybrid bipolar electrode (BPE) for the measurement of cancer cell surface protein using ferrocence (Fc) labeled aptamer as signal recognition and amplification probe. According to the electric neutrality of BPE, the cathode of U-shaped ITO BPE was electrochemically deposited by Au nanoparticles (NPs) to enhance its conductivity and surface area, decrease the overpotential of O2 reduction, which would correspondingly increase the oxidation current of Ru(bpy)3(2+)/tripropylamine (TPA) on the anode of BPE and resulting a ∼4-fold enhancement of ECL intensity. Then a signal amplification strategy was designed by introducing Fc modified aptamer on the anode surface of BPE through hybridization for detecting the amount of mucin-1 on MCF-7 cells. The presence of Fc could not only inhibit the oxidation of Ru(bpy)3(2+) because of its lower oxidation potential, its oxidation product Fc(+) could also quench the ECL of Ru(bpy)3(2+)/TPA by efficient energy-transfer from the excited-state Ru(bpy)3(2+)* to Fc(+), making the ECL intensity greatly quenched. On the basis of the cathodic Au NPs induced ECL enhancing coupled with anodic Fc induced signal quenching amplification, the approach allowed detection of mucin-1 aptamer at a concentration down to 0.5 fM and was capable of detecting a minimum of 20 MCF-7 cells. Besides, the amount of mucin-1 on MCF-7 cells was calculated to be 9041 ± 388 molecules/cell. This approach therefore shows great promise in bioanalysis.

With DNA as a rigid spacer, Ag nanoparticles (NPs) were bridged to CdS quantum dots (QDs) for the stimulation of exciton-plasmon interactions (EPI) in a photoelectrochemical (PEC) system. Due to their natural absorption overlap, the exciton of the QDs and the plasmon of Ag NPs could be induced simultaneously. The EPI resonant nature enabled manipulating photoresponse of the QDs via tuning interparticle distances. Specifically, the photocurrent of the QDs could be greatly attenuated and even be completely damped by the generated EPI. The work opens a different horizon for EPI investigation through an engineered PEC nanosystem, and provides a viable mechanism for new DNA sensing protocol.

Herein we demonstrate the protocol of a biocatalytic precipitation (BCP)-based sandwich photoelectrochemical (PEC) horseradish peroxidase (HRP)-linked immunoassay on the basis of their synergy effect for the ultrasensitive detection of mouse IgG (antigen, Ag) as a model protein. The hybrid film consisting of oppositely charged polyelectrolytes and CdS quantum dots (QDs) is developed by the classic layer by layer (LbL) method and then employed as the photoactive antibody (Ab) immobilization matrix for the subsequent sandwich-type Ab-Ag affinity interactions. Improved sensitivity is achieved through using the bioconjugates of HRP-secondary antibodies (Ab(2)). In addition to the much enhanced steric hindrance compared with the original one, the presence of HRP would further stimulate the BCP onto the electrode surface for signal amplification, concomitant to a competitive nonproductive absorption that lowers the photocurrent intensity. As a result of the multisignal amplification in this HRP catalyzed BCP-based PEC immunoassay, it possesses excellent analytical performance. The antigen could be detected from 0.5 pg/mL to 5.0 ng/mL with a detection limit of 0.5 pg/mL.

A strategy for label-free oligonucleotide (DNA) analysis has been proposed by measuring the DNA-morpholino hybridization hindered diffusion flux of probe ions Fe(CN)(6)(3-) through nanochannels of a porous anodic alumina (PAA) membrane. The flux of Fe(CN)(6)(3-) passing through the PAA nanochannels is recorded using an Au film electrochemical detector sputtered at the end of the nanochannels. Hybridization of the end-tethered morpholino in the nanochannel with DNA forms a negatively charged DNA-morpholino complex, which hinders the diffusion of Fe(CN)(6)(3-) through the nanochannels and results in a decreased flux. This flux is strongly dependent on ionic strength, nanochannel aperture, and target DNA concentration, which indicates a synergetic effect of steric and electrostatic repulsion effects in the confined nanochannels. Further comparison of the probe flux with different charge passing through the nanochannels confirms that the electrostatic effect between the probe ions and DNA dominates the hindered diffusion process. Under optimal conditions, the present nanochannel array-based DNA biosensor gives a detection limit of 0.1 nM.

In this paper, we present a novel approach for preparing patterned Au/poly(dimethylsiloxane) (PDMS) substrate. Chemical gold plating instead of conventional metal evaporation or sputtering was introduced to achieve a homogeneous gold layer on native PDMS for the first time, which possesses low-cost and simple operation. An electrochemical oxidation reaction accompanied by the coordination of gold and chloride anion was then exploited to etch gold across the region covered by electrolyte. On the basis of such an electrochemical etching, heterogeneous Au/PDMS substrate which has a gold "island" pattern or PDMS dots pattern was fabricated. Hydrogen bubbles which were generated in the etching process due to water electrolysis were used to produce a safe region under the Pt auxiliary electrode. The safe region would protect gold film from etching and lead to the formation of the gold "island" pattern. In virtue of a PDMS stencil with holes array, gold could be etched from the exposed region and take on the PDMS dots pattern which was selected to for protein and cell patterning. This patterned Au/PDMS substrate is very convenient to construct cytophobic and cytophilic regions. Self-assembled surface modification of (1-mercaptoundec-11-yl)hexa(ethylene glycol) on gold and adsorption of fibronectin on PDMS are suitable for effective protein and cell patterning. This patterned Au/PDMS substrate would be a potentially versatile platform for fabricating biosensing arrays.

We report a simple electrochemical method for the identification of properties of peripheral nerve fibers, based on the detection of a neurotransmitter enzyme, acetylcholinesterase (AChE). A poly(diallydimethylammonium) (PDDA) adulterated poly(dimethylsiloxane) (PDMS) film is spin-coated on the surface of gold electrodes. Gold nanoparticles (AuNPs) are in situ synthesized on the polymer film, which act as "electron antennae" between the film and the electrode surface and also provide a biocompatible interface. This PDMS-PDDA/AuNPs film shows different adsorption sites to choline oxidase (ChO) and AChE; after incubation with ChO, the polymer-gold nanocomposite film also shows excellent adsorption ability to AChE. Moreover the adsorption sites of AChE would not be blocked by bovine serum albumin (BSA) which provides a good platform for the quantitative amperometric determination of AChE via the oxidation of the enzymatically generated H 2O 2 in the bienzyme system in the presence of acetylcholine. The detection limit is down to 1.0 unit/mL. The polymer-gold nanocomposite film shows excellent anti-interference ability to the coexistent electroactive substances such as ascorbic acid. Thus it was applied to determine AChE in peripheral nerve fibers homogenates and identify the motor and sensory fibers for the first time. Compared with histochemical staining methods, the electrochemical technique shows good accurate rate and faster response, which has good potential for a clinical application.

Nanochannels have brought new opportunities for biosensor development. Herein, we present the novel concept of a nanochannels photoelectrochemical (PEC) biosensor based on the integration of a unique CuxO-nanopyramid-islands (NPIs) photocathode, an anodic aluminum oxide (AAO) membrane, and alkaline phosphatase (ALP) catalytic chemistry. The CuxO-NPIs photocathode possesses good performance, and further assembly with AAO yields a designed architecture composed of vertically aligned, highly ordered nanoarrays on top of the CuxO-NPIs film. After biocatalytic precipitation (BCP) was stimulated within the channels, the biosensor was used for the successful detection of ALP activity. This study has not only provided a novel paradigm for an unconventional nanochannels PEC biosensor, which can be used for general bioanalytical purposes, but also indicated that the new concept of nanochannel -- semiconductor heterostructures is a step toward innovative biomedical applications. [ABSTRACT FROM AUTHOR]