Search

An alkoxysilane derivative bearing a 10-vertex closo-decaborate nanocluster (B10H102–) was successfully synthesized and immobilized in a SiO2 aerogel matrix. closo-Decaborate-containing SiO2 aerogels showed high specific surface (∼750 m2/g), open porosity (∼95%), and extremely low apparent density (80 mg/cm3) as well as increased thermal stability of the closo-decaborate moiety. Despite the low boron content (∼1.2 mol % of boron nanoclusters comprising natural mixture of boron isotopes), the aerogel nanomaterial demonstrated excellent neutron capture properties exceeding lightweight polymer-based analogues. Cell viability assessment indicated the pronounced dose-dependent toxicity of the borylated aerogel with respect to malignant cells (U251 MG glioblastoma line) and low toxicity with respect to normal cells (dental pump stem cells). The combination of the properties of closo-decaborate-modified silica aerogels makes them good candidate material for shielding of patients and healthcare personnel during boron neutron capture therapy procedures. [ABSTRACT FROM AUTHOR]

The interactions between natural colloidal organic matter and actinides in solutions are complex and not fully understood. In this work, a crew-cut polystyrene- b -poly(acry1ic acid) (PS- b -PAA) micelle is proposed as a model particle for humic acid (HA) colloid with the aim to better understand the sequestration, aggregation, and mobility of HA colloids in the presence of uranyl ions. The effects of uranyl ions on the structure of PS 29k - b -PAA 5k micelles in aqueous solution were mainly investigated by synchrotron small-angle X-ray scattering. A core-shell model, accounting for the thickness and contrast changes of the PAA corona induced by the adsorption of uranyl, was employed to analyze the scattering data. A combination of transmission electron microscopy, dynamic light scattering, and zetametry showed a strong affinity of uranyl ions to PAA segments in water at pH 4-5 that resulted in the shrinkage and improved contrast of the PAA corona, as well as colloidal destabilization at a high uranyl concentration.

Colloidal particles based on supramolecular polymers are emerging as promising functional materials because of their intrinsic dynamic features and the possibility of stimuli responsivity. In this work, ≈200 nm self-assembled redox-responsive colloidal particles made of 1D-coordination polymers were readily prepared. In these metallopolymers, organic entities made of bis(viologen) groups covalently associated with terpyridine units are spontaneously bridged by Zn 2+ cations through the formation of coordination bonds. The properties of these particles were analyzed and their redox activities investigated. Upon reduction of the viologen units, the formation of π-dimers between the reduced viologen moieties was demonstrated by spectroscopic experiments. It was shown that intermolecular π-dimers (i.e., between different polymer chains) that do not exist in homogeneous polymer solutions were, nevertheless, formed in the particle's structure because of the effects of confinement. The presence of these π-dimers allows stabilization of the charge in the colloids.

We report on small-angle neutron scattering (SANS) investigations of separate phase domains in high fat (70%) oil-in-water emulsions emulsified with the combination of sodium caseinate (CAS) and phosphatidylcholine (PC). The emulsion as a whole was studied by contrast variation to identify scattering components dominated by individual emulsifiers. The emulsion was subsequently separated into the aqueous phase and the oil-rich droplet phase, which were characterized separately. Emulsions produced with 1.05% (w/w) CAS and PC fraction which varies between 1.75% (w/w) and 0.35% (w/w) provided droplets between 10 and 19 μm in surface weighted mean in 70% fish oil-in-water emulsions. At least two-third of the overall CAS is associated with the interface, while the rest remains with the aqueous phase. Six percent of PC formed a monolayer in the interface, while the rest of the PC remains in the droplet phase in the form of multilayers. When the separated components were resuspended, the resuspended emulsion showed similar characteristics compared to the original emulsion in terms of droplet size distribution and neutron scattering. Instead, CAS in the aqueous phase separated from the emulsion shows aggregation not present in the corresponding CAS-in-D 2 O system.

In the present work, we describe the synthesis of two single-chain phenylene-modified bolalipids, namely PC-C17pPhC17-PC and PC-C17pPhC17-OH, with either symmetrical (phosphocholine) or asymmetrical (phosphocholine and hydroxyl) headgroups using a Sonogashira cross-coupling reaction as key step. The temperature-dependent aggregation behavior of both bolalipids in aqueous suspension was studied using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy, small angle neutron scattering (SANS), and X-ray scattering. We show that different headgroup symmetries lead to a change in the aggregation behavior: Whereas PC-C17pPhC17-PC forms nanofibers with a diameter of 5.7 nm that transform into small ellipsoidal micelles at 23 °C, the PC-C17pPhC17-OH self-assembles into lamellae with bolalipid molecules in an antiparallel orientation up to high temperatures. Furthermore, the mixing behavior of both bolalipids with bilayer-forming phospholipids (DPPC and DSPC) was studied by means of DSC and TEM. The aim was to stabilize bilayer membranes formed of phospholipids in order to improve these mixed lipid vesicles for drug delivery purposes. We show that the symmetrical PC-C17pPhC17-PC is miscible with DPPC and DSPC; however, closed lipid vesicles are not observed, and elongated micelles and bilayer fragments are found instead. In contrast, the asymmetrical PC-C17pPhC17-OH shows no miscibility with phospholipids at all.

The interactions among neutral polymer polyacrylamide (PAM) and the biosurfactant Surfactin and four betaines, N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (SDDAB), N-tetradecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (STDAB), N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (SHDAB), and N-dodecyl-N,N-dimethyl-2-ammonio-acetate (C12BE), in phosphate buffer solution (PBS) have been studied by surface tension measurements, small-angle neutron scattering (SANS), small-angle X-ray scattering (SAXS), and rheological experiments. It has been confirmed that the length of alkyl chain is a key parameter of interaction between betaines and PAM. Differences in scattering contrast between X-ray and neutrons for surfactants and PAM molecules provide the opportunity to separately follow the changes of structure of PAM and surfactant aggregates. At concentrations of betaines higher than CMC (critical micelle concentration) and C2 (CMC of surfactant with the presence of polymer), spherical micelles are formed in betaines and betaines/PAM solutions. Transition from spherical to rod-like aggregates (micelles) has been observed in solutions of Surfactin and Surfactin/SDDAB (αSurfactin = 0.67 (molar fraction)) with addition of 0.8 wt % of PAM. The conformation change of PAM molecules only can be observed for Surfactin/SDDAB/PAM system. Viscosity values follow the structural changes suggested from scattering measurements i.e., gradually increases for mixtures PAM → Surfactin/PAM → Surfactin/SDDAB/PAM in PBS.

The interactions between the lipopeptide Surfactin and four betaines, N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (SDDAB), N-tetradecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (STDAB), N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (SHDAB), and N-dodecyl-N,N-dimethyl-2-ammonio-acetate (C12BE) are studied by surface tension and small-angle neutron scattering (SANS). SDDAB, STDAB, and SHDAB have the same headgroup but different hydrophobic chains. C12BE has different headgroup but the same hydrophobic chain with SDDAB. According to the interfacial parameters calculated from surface tension, the synergism between Surfactin and betaine is relevant with the molecule structure of betaine and the mole ratio of them. For betaines, the optimum alkyl chain length (STDAB) and long enough separation between positive charge and negative charge in headgroup are responsible for highest synergetic interaction with Surfactin. The aggregates of individual Surfactin and the mixtures of Surfactin and sulfopropyl betaines are predicted to be spherical based on the packing parameter (pp) and the average packing parameter (P(av)), which is in close qualitative agreement with SANS data analysis, while Surfactin/C12BE forms ellipsoidal micelles due to the smaller headgroup of C12BE.

We report on the phase transitions, solution structure, and consequent effect on the photophysical properties of poly[3-(6-trimethylammoniumhexyl)thiophene] bromide (P3TMAHT) in aqueous sodium dodecylsulfate (SDS). Polythiophene was mixed with SDS or deuterated SDS to form P3TMAHT(SDS)(x) complex (x = the molar ratio of surfactant over monomer units) in D(2)O and studied by small-angle neutron and X-ray scattering (SANS/SAXS) and optical spectroscopy. At room temperature, P3TMAHT forms charged aggregates with interparticle order. The addition of SDS eliminates the interparticle order and leads to rod-like (x = 1/5) or sheet-like polymer-SDS aggregates (x = 1/2 to 1) containing rod-like (x = 1/5 to 1/2) or sheet-like (x = 1/2 to 1) polymer associations. Partial precipitation occurs at the charge compensation point (x = 1). Ellipsoidal particles without interparticle order, reminiscent of SDS micelles modified by separated polymer chains, occur for x = 2 to 5. Free SDS micelles dominate for x = 20. Structural transitions lead to a concomitant variation in the solution color from red (P3TMAHT) to violet (x = 1/5 to 1) to yellow (x > 2). The photoluminescence fingerprint changes progressively from a broad featureless band (x = 0) through the band narrowing and appearance of vibronic structure (x = 1/5 to 1) to the return to a blue-shifted broad emission band (x = 5). The polymer stiffness reaches a maximum for x = 1, which leads to minimization of the Stokes shift (0.08 eV). This work gives fundamental information upon how surfactant complexation can influence both the solution structure and photophysical properties of a water-soluble polythiophene.

We report on the aggregate structure of a symmetrical A-B-A 9,9-dialkylfluorene/2-alkylaniline "coil-rod-coil" triblock copolymer (or PF/PANI11112-b-PANI11)--consisting of 2-dodecylanilines as A blocks and 9,9-di(3,7,11-trimethyldodecyl)fluorene)s as B blocks--mixed in deuterated toluene, chloroform, and methylcyclohexane. These mixtures contain micrometer scale aggregates. Small-angle neutron scattering data indicate that the interface between the aggregates and solvents manifests surface fractal-like structure. The upper and lower limit length scales which show fractal character are of the order of > 100 and 15 nm. The surface fractal dimension D(s) varies from 2.2 to 2.8. The data show that stiff polyfluorene (PF) segments (persistence length > or = 9.5 nm, diameter approximately 2 nm) of PF/PANI11112-b-PANI11 are dissolved down to the molecular level. Photoluminescence data indicate that most PF units are isolated from both polyaniline (PANi) units and each others. Together with the scattering data, this implies that the disordered interface consists of stiff isolated PF blocks linked together via domains of associated PANi blocks.

Three-layer nanoparticles were prepared by radiation-induced polymerization of 1-10 g/L of methyl methacrylate dissolved in a 0.1 wt % D(2)O solution of polystyrene-poly(methacrylic acid) (PS-PMA) micelles. According to NMR and small-angle neutron scattering (SANS), most of the poly(methyl methacrylate) (PMMA) is adsorbed at the core-shell interface of the particles. A small fraction of shorter PMMA probably sticks to outer parts of the PMA chains. The absorption kinetics and equilibria of benzene and chloroform were studied by NMR and SANS time-resolved experiments. The diffusion front in the PS core is very narrow but quite broad in the PMMA sheet suggesting, thus, a less compact state of PMMA. According to SANS, the diffusion kinetics is almost independent of the PMMA sheet thickness. In contrast to it, the absorption capacity, reflected by both SANS and NMR, increases markedly with the PMMA content in the particle. The maximum amount of solubilized compound depends on its positive interaction with PMMA (expressed by the chi parameter) but is restricted by the growing interface tension between swollen PMMA and D(2)O. In accordance with this conclusion, a particle saturated with benzene can absorb chloroform only at the expense of a part of benzene expelled into the surrounding medium and vice versa. Starting with 10 g PMMA/L (10 times the weight of the original micelles), the particles become unstable when being swollen with a good solvent.