Search

Indoor environments are particularly vulnerable to microplastics (MPs) and associated copollutants due to limited air circulation and particulate matter accumulation. Continuous monitoring is essential to evaluate exposure levels and health risks. We propose using indoor spider webs as passive monitors for MPs and their copollutants. MPs were found in both web and dust samples with nonuniform distribution ( p < 0.05), indicating contamination hotspots. Web samples had significantly higher MP levels (138-33,570 MPs/g) compared to dust samples (59-9324 MPs/g). A strong positive correlation ( r = 0.93, p < 0.05) between MPs in dust and webs suggests that spider webs are effective bioindicators of indoor MP contamination. The study also revealed the presence of Bisphenol A and various phthalic acid esters (PAEs). Co-pollutant concentrations ranged from 52.02-1971.78 μg/kg in webs and 43.18-518.42 μg/kg in dust. Diethyl phthalate (DEP) was more common in webs, while Dibutyl phthalate (DBP) predominated in dust. These findings highlight spider webs' potential as both effective biomonitoring tools and significant sinks for MPs and their cocontaminants in indoor environments., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Copper is an essential trace element for human biology where its metal dyshomeostasis accounts for an increased level of serum copper, which accelerates protein aggregation. Protein aggregation is a notable feature for many neurodegenerative disorders. Herein, we report an experimental study using two model proteins, bovine serum albumin (BSA) and human serum albumin (HSA), to elucidate the mechanistic pathway by which serum albumins get converted from a fully folded globular protein to a fibril and an amorphous aggregate upon interaction with copper. Steady-state fluorescence, time-resolved fluorescence studies, and Raman spectroscopy were used to monitor the unfolding of serum albumin with increasing copper concentrations. Steady-state fluorescence studies have revealed that the fluorescence quenching of BSA/HSA by Cu(II) has occurred through a static quenching mechanism, and we have evaluated both the quenching constants individually. The binding constants of BSA-Cu(II) and HSA-Cu(II) were found to be 2.42 × 10 4 and 0.05 × 10 4 M -1 , respectively. Further nanoscale morphological changes of BSA mediated by oligomers to fibril and HSA to amorphous aggregate formation were studied using atomic force microscopy. This aggregation process correlates with the Stern-Volmer plots in the absence of discernible lag phase. Raman spectroscopy results obtained are in good agreement with the increase in antiparallel β-sheet structures formed during the aggregation of BSA in the presence of Cu(II) ions. However, an increase in α-helical fractions is observed for the amorphous aggregate formed from HSA., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

The development of a sustainable membrane surface based on chitosan/poly(acrylic acid) (CHI/PAA) multilayers suitable for applications in analytical separations is reported here. Bilayers are constructed on polyamide microfiltration membranes at a pH combination of 3/3 (CHI pH/PAA pH) through a layer by layer approach. A 12.5 bilayer yielded a thickness of 400 nm. Low pressure (10 psi) filtrations through a 5.5 bilayered membrane exhibited high flux (7 m(3) m(-2) day(-1)) and selectivity (NaCl/reactive black 5 (RB5) selectivity >8000). The selectivity and flux observed here are the highest reported to date for low pressure filtrations through membranes. The increase in flux with increasing feed salt concentration is correlated with morphological transformations. Salt content above 7500 ppm causes some perturbation of surface layers. The presence of RB5, a model dye in the feed, restores the surface to maintain sustainability. A skin layer as thin as 50 nm imparts a large separation window. An RB5 feed concentration of 500 ppm results in 98.64% rejection with a flux of 25.79 m(3) m(-2) day(-1). The increase in flux with feed dye concentration supports the plasticizing action of RB5. The transport studies with large feed dye concentrations indicate that at a dye concentration of 500 ppm, the linear growing region (pre-exponential, 5.5 bilayer) itself provides a separation window similar to that of 100 ppm. At the same time, 1000 ppm requires a 9.5 bilayer that falls in the nonlinear growing region. Scanning electron microscopy images show the increase in porosity with respect to feed dye. Interesting morphologies that show the sustainable nature of the membrane surfaces along with the transport data of RB5 are presented.

The interaction of bisphenol-S (BPS) with serum albumins using steady-state, synchronous, time-resolved, and circular dichroism spectroscopies has been investigated. The binding interactions have also been investigated in the case of bisphenol A (BPA). The fluorescence quenching pathways are different for both of these endocrine disrupting compounds. Steady-state and time-resolved studies reveal static quenching at lower concentrations of BPS and dynamic quenching at higher concentrations. CD results also maintained the concentration dependent variation with a complete distortion of α-helices at 10(-5) M BPS. Besides this, addition of sodium dodecyl sulfate (SDS) results in the further unfolding of protein in the case of BPS, whereas time-resolved studies indicated refolding for BPA denatured human serum albumin (HSA). The entire study indicates an irreversible binding of BPS with HSA. Hence, these results reveal the possible involvement of BPS in the physiological pathway raising a health threat as already their presences in body fluids are known.

The transients formed during the reactions of oxidizing radicals with 1-naphthol (1) and 2-naphthol (2) in aqueous medium have been investigated by pulse radiolysis with detection by absorption spectroscopy and density functional theory (DFT) calculations. The transient spectra formed on hydroxyl radical ((•)OH) reactions of 1 and 2 exhibited λ(max) at 340 and 350 nm at neutral pH. The rate constants of the (•)OH reactions of 1 (2) were determined from build-up kinetics at λ(max) of the transients as (9.63 ± 0.04) × 10(9) M(-1) s(-1) ((7.31 ± 0.11) × 10(9) M(-1) s(-1)). DFT calculations using the B3LYP/6-31+G(d,p) method have been performed to locate favorable reaction sites in both 1 and 2 and identification of the pertinent transients responsible for experimental results. Calculations demonstrated that (•)OH additions can occur mostly at C1 and C4 positions of 1, and at C1 and C8 positions of 2. Among several isomeric (•)OH adducts possible, the C1 adduct was found to be energetically most stable both in 1 and 2. Time-dependent density functional theory (TDDFT) calculations in the solution phase has shown that the experimental spectrum of 1 was mainly attributed by 1a4 (kinetically driven (•)OH-adduct) formed via the addition of (•)OH at the C4 position which was 0.73 kcal/mol endergonic compared to 1a1 (thermodynamic (•)OH adduct), whereas 2a1 (thermodynamic/kinetic (•)OH-adduct) was mainly responsible for the experimental spectrum of 2. Naphthoxyl radicals of 1 and 2 have been predicted as the transient formed in the reaction of (•)OH at basic pH. In addition, the same transient species resulted from the reactions of oxide radical ion (O(•-)) at pH ≈ 13 and azide radical (N3(•)) at pH 7 with 1 and 2. Further, UV photolysis of aqueous solutions of 1 and 2 containing H2O2 (UV/H2O2) were used for the (•)OH induced oxidation product formations up on 60% degradations of 1 and 2; profiling of the oxidation products were performed by using an ultraperformance liquid chromatography quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS) method. According to the UPLC-Q-TOF-MS analyses, the preliminary oxidation products are limited to dihydroxy naphthalenes and naphthoquinones with N2-saturation, while some additional products (mainly isomeric monohydroxy-naphthoquinones) have been observed in the degradations of 1 and 2 in the presence of O2. We postulate that dihydroxy naphthalenes are derived explicitly from the most favorable (•)OH-adducts speculated (preference is in terms of the kinetic/thermodynamic dominancy of transients) by using theoretical calculations which in turn substantiate the proposed reaction mechanisms. The observations of (•)OH-adducts for an aromatic phenol (herein for both 1 and 2 at pH 7) rather than phenoxyl type radical in the pulse radiolysis experiments is a distinct and unique illustration. The present study provides a meaningful basis for the early stages associated with the (•)OH initiated advanced oxidation processes of 1- and 2-naphthols.

The reactions of (•)OH and O(•-), with thymol, a monoterpene phenol and an antioxidant, were studied by pulse radiolysis technique and DFT calculations at B3LYP/6-31+G(d,p) level of theory. Thymol was found to efficiently scavenge OH radicals (k = 8.1 × 10(9) dm(3) mol(-1) s(-1)) to produce reducing adduct radicals, with an absorption maximum at 330 nm and oxidizing phenoxyl radicals, with absorption maxima at 390 and 410 nm. A major part of these adduct radicals was found to undergo water elimination, leading to phenoxyl radicals, and the process was catalyzed by OH(-) (or Na(2)HPO(4)). The rate of reaction of O(•-) with thymol was found to be comparatively low (k = 1.1 × 10(9) dm(3) mol(-1) s(-1)), producing H abstracted species of thymol as well as phenoxyl radicals. Further, these phenoxyl radicals of thymol were found to be repaired by ascorbate (k = 2.1 × 10(8) dm(3) mol(-1) s(-1)). To support the interpretation of the experimental results, DFT calculations were carried out. The transients (both adducts and H abstracted species) have been optimized in gas phase at B3LYP/6-31+G(d,p) level of calculation. The relative energy values and thermodynamic stability suggests that the ortho adduct (C6&#95;OH adduct) to be most stable in the reaction of thymol with OH radicals, which favors the water elimination. However, theoretical calculations showed that C4 atom in thymol (para position) can also be the reaction center as it is the main contributor of HOMO. The absorption maxima (λ(max)) calculated from time-dependent density functional theory (TDDFT) for these transient species were close to those obtained experimentally. Finally, the redox potential value of thymol(•)/thymol couple (0.98 V vs NHE) obtained by cyclic voltammetry is less than those of physiologically important oxidants, which reveals the antioxidant capacity of thymol, by scavenging these oxidants. The repair of the phenoxyl radicals of thymol with ascorbate together with the redox potential value makes it a potent antioxidant with minimum pro-oxidant effects.

This work illustrates the potential use of PEI/PSS bilayers assembled via layer by layer (lbl) method on a nylon microfiltration membrane for the recovery of phosphate from water in the presence of chloride under ultrafiltration conditions. A total of nine bilayers were used for the selective recovery of phosphate. Bilayers were constructed from polyelectrolyte solutions of varying ionic strength (0-1 M of NaCl). The selected pH for deposition of PEI (5.9) and the presence of supporting salt in the polyelectrolyte solution is expected to provide membranes with high permeability and high charge density. This particular combination of bilayers yielded high flux membranes that allowed selective removal of H(2)PO(4)(-) in the presence of Cl(-) at low pressure (0.28 bar). The magnitude of negative solute rejection of chloride showed increasing trend with the number of bilayer for a particular salt concentration. Whereas the increase in magnitude with ionic strength is so high (-6.18 to -269.17 at 0.5 M NaCl for 9 bl) that gave the best observed Cl(-)/H(2)PO(4)(-) selectivity (310.23, flux 13.53 m(3)/m(2)-day). To the best of our knowledge, this is the first time a multilayer polyelectrolyte system with such a high selectivity and rejection for H(2)PO(4)(-) is reported. The solution flux decreased with the number of bilayers and ionic strength. The rejection of phosphate was dependent on feed pH, concentration of deposited polyelectrolyte solution, and composition of membrane support.

A study is made of the kinetics and mechanism of the reaction of radiolytically produced hydrated electron (e-(aq)) with some triazine derivatives [1,3,5-triazine (T), 2,4,6-trimethoxy-1,3,5-triazine (TMT), 2,4-dioxohexahydro-1,3,5-triazine (DHT), 6-chloro N-ethyl N-(1-methylethyl)-1,3,5-triazine 2,4-diamine (atrazine, AT), and cyanuric acid (CA)] in aqueous medium using pulse and steady-state radiolysis techniques. The second-order rate constants were determined from the pseudo first-order decay of e(-)(aq) in the presence of triazines at 720 nm, and the values obtained with T, TMT, AT, and CA are in the order of 10(9) dm(3) mol(-1) s(-1) and that of DHT was 10(8) dm(3) mol(-1) s(-1) at pH 6. The transient absorption spectra from the reaction of e(-)(aq) with T and TMT are characterized by their lambda(max) at 310 nm, and those of DHT and CA are around 280 and 290 nm, respectively. However, a very weak and featureless absorption spectrum is obtained from AT. On the basis of the spectral evidence and on the quantitative electron transfer from the transient intermediates to the oxidant, methyl viologen (MV(2+)), the intermediate radicals are assigned to N-protonated electron adducts (with the unpaired spin density at carbon) of triazines. The degradation profiles, monitored as the disappearance of parent triazine concentrations as a function of dose, obtained with AT, TMT, CA, and DHT, highlight the potential use of e-(aq) in the degradation of triazines.