Search

Herein, we report the synthesis and theoretical investigation of a nonsymmetric bis(diisopropylamino)cyclopropenimine (DAC)-functionalized proton sponge derivative, coined the "Janus" sponge. The reported sponge was isolated as a monoprotonated salt, though no intramolecular hydrogen bond was observed. Homodesmotic equations supported the absence of a N-HN intramolecular hydrogen bond and a relatively low freebase strain, while DFT calculations and X-ray crystallography revealed the presence of a hydrogen bond to the Cl- counterion. Associated with this fact was the rare in-out geometry of the basic nitrogens, which represents the first such instance in a proton sponge not having an ortho-substituent and/or being in a protonated state. Furthermore, NLP donation into the cyclopropenium cation was found to stabilize this unprecedented in-out geometry. The measured pKa was determined to be 23.8, in good agreement with the computed value of 23.9. Lastly, the Janus sponge was found to have fluorescent properties both in the solid state and in solution, which notably represents the first example of a cyclopropenimine-based fluorescent organic compound. [ABSTRACT FROM AUTHOR]

A multicomponent reaction between an aziridine aldehyde dimer, isocyanide, and L-proline to afford a chiral piperazinone was studied to gain insight into the stereodetermining and rate-limiting steps of the reaction. The stereochemistry of the reaction was found to be determined by isocyanide addition, while the rate-limiting step was found to deviate from traditional isocyanide-based multicomponent reactions. A first-order rate dependence on aziridine aldehyde dimer and a zero-order rate dependence on all other reagents have been obtained. Computations at the MPWPW91/6-31G(d) level supported the experimental kinetic results and provide insight into the overall mechanism and the factors contributing to stereochemical induction. These factors are similar to traditional isocyanide-based multicomponent reactions, such as the Ugi reaction. The computations revealed that selective formation of a Z-iminium ion plays a key role in controlling the stereoselectivity of isocyanide addition, and the carboxylate group of L-proline mediates stereofacial addition. These conclusions are expected to be applicable to a wide range of reported stereoselective Ugi reactions and provide a basis for understanding the related macrocyclization of peptides with aziridine aldehydes. [ABSTRACT FROM AUTHOR]

The origin of the enantioselectivity in the [Cu(R,R)-Ph-box](OTf)2-catalyzed intramolecular aminooxygenation of N-sulfonyl-2-allylanilines and 4-pentenylsulfonamides to afford chiral indolines and pyrrolidines, respectively, was investigated using density functional theory (DFT) calculations. The pyrrolidine-forming transition-state model for the major enantiomer involves a chairlike seven-membered cyclization transition state with a distorted square-planar copper center, while the transition-state model for the minor enantiomer was found to have a boatlike cyclization geometry having a distorted tetrahedral geometry about the copper center. Similar copper-geometry trends were observed in the chiral indoline-forming reactions. These models were found to be qualitatively consistent with experimental results and allow for rationalization of how substitution on the substrate backbone and N-sulfonyl substituent affect the level of enantioselectivity in these and related copper(II)-catalyzed enantioselective reactions. [ABSTRACT FROM AUTHOR]

The problem this paper addresses is the origin of the hysteretic behavior in two-terminal molecular junctions made from an EGaIn electrode and self-assembled monolayers of alkanethiolates terminated in chelates (transition metal dichlorides complexed with 2,2'-bipyridine; BIPY-MCl 2 ). The hysteresis of conductance displayed by these BIPY-MCl 2 junctions changes in magnitude depending on the identity of the metal ion (M) and the window of the applied voltage across the junction. The hysteretic behavior of conductance in these junctions appears only in an incoherent (Fowler-Nordheim) tunneling regime. When the complexed metal ion is Mn(II), Fe(II), Co(II), or Ni(II), both incoherent tunneling and hysteresis are observed for a voltage range between +1.0 V and -1.0 V. When the metal ion is Cr(II) or Cu(II), however, only resonant (one-step) tunneling is observed, and the junctions exhibit no hysteresis and do not enter the incoherent tunneling regime. Using this correlation, the conductance characteristics of BIPY-MCl 2 junctions can be controlled. This voltage-induced change of conductance demonstrates a simple, fast, and reversible way (i.e., by changing the applied voltage) to modulate conductance in molecular tunneling junctions.

This paper describes a surface analysis technique that uses the "EGaIn junction" to measure tunneling current densities ( J (V), amps/cm 2 ) through self-assembled monolayers (SAMs) terminated in a chelating group and incorporating different transition metal ions. Comparisons of J (V) measurements between bare chelating groups and chelates are used to characterize the composition of the SAM and infer the dissociation constant ( K d , mol/L), as well as kinetic rate constants ( k off , L/mol · s; k on , 1/s) of the reversible chelate-metal reaction. To demonstrate the concept, SAMs of 11-(4-methyl-2,2'-bipyrid-4'-yl (bpy))undecanethiol (HS(CH 2 ) 11 bpy) were incubated within ethanol solutions of metal salts. After rinsing and drying the surface, measurements of current as a function of incubation time and concentration in solution are used to infer k off , k on , and K d . X-ray photoelectron spectroscopy (XPS) provides an independent measure of surface composition to confirm inferences from J (V) measurements. Our experiments establish that (i) bound metal ions are stable to the rinsing step as long as the rinsing time, τ rinse ≪ 1 k o f f ; (ii) the bound metal ions increase the current density at the negative bias and reduce the rectification observed with free bpy terminal groups; (iii) the current density as a function of the concentration of metal ions in solution follows a sigmoidal curve; and (iv) the values of K d measured using J (V) are comparable to those measured using XPS, but larger than those measured in solution. The EGaIn junction, thus, provides a new tool for the analysis of the composition of the surfaces that undergo reversible chemical reactions with species in solution.

This Article describes the relationship between molecular structure, and the rectification of tunneling current, in tunneling junctions based on self-assembled monolayers (SAMs). Molecular dipoles from simple organic functional groups (amide, urea, and thiourea) were introduced into junctions with the structure Ag TS /S(CH 2 ) n R(CH 2 ) m CH 3 //Ga 2 O 3 /EGaIn. Here, R is an n-alkyl fragment (-CH 2 -) 2 or 3 , an amide group (either -CONH- or -NHCO-), a urea group (-NHCONH-), or a thiourea group (-NHCSNH-). The amide, urea, or thiourea groups introduce a localized electric dipole moment into the SAM and change the polarizability of that section of the SAM, but do not produce large, electronically delocalized groups or change other aspects of the tunneling barrier. This local change in electronic properties correlates with a statistically significant, but not large, rectification of current ( r + ) at ±1.0 V (up to r + ≈ 20). The results of this work demonstrate that the simplest form of rectification of current at ±1.0 V, in EGaIn junctions, is an interfacial effect, and is caused by a change in the work function of the SAM-modified silver electrode due to the proximity of the dipole associated with the amide (or related) group, and not to a change in the width or mean height of the tunneling barrier.

The use of a bis(diisopropylamino)cyclopropenimine-substituted bis-protonated proton sponge as a bifunctional phase-transfer catalyst is reported. Experimental studies and DFT calculations suggest it operates simultaneously as a hydrogen bond donor and a phase-transfer catalyst, facilitating the movement of charged intermediates from the interface to the organic phase via favorable partitioning of hydrophilic/hydrophobic surface areas, resulting in high catalytic activity.

Herein, we report the synthesis and theoretical investigation of a nonsymmetric bis(diisopropylamino)cyclopropenimine (DAC)-functionalized proton sponge derivative, coined the "Janus" sponge. The reported sponge was isolated as a monoprotonated salt, though no intramolecular hydrogen bond was observed. Homodesmotic equations supported the absence of a N-HN intramolecular hydrogen bond and a relatively low freebase strain, while DFT calculations and X-ray crystallography revealed the presence of a hydrogen bond to the Cl(-) counterion. Associated with this fact was the rare in-out geometry of the basic nitrogens, which represents the first such instance in a proton sponge not having an ortho-substituent and/or being in a protonated state. Furthermore, NLP donation into the cyclopropenium cation was found to stabilize this unprecedented in-out geometry. The measured pKa was determined to be 23.8, in good agreement with the computed value of 23.9. Lastly, the Janus sponge was found to have fluorescent properties both in the solid state and in solution, which notably represents the first example of a cyclopropenimine-based fluorescent organic compound.

We have prepared two new diastereoisomeric 2-aza-5-phosphabicyclo[2.2.1]heptanes from naturally occurring trans-4-hydroxy-L-proline in six chemical operations. These syntheses are concise and highly efficient, with straightforward purification. When we used these chiral phosphines as catalysts for reactions of γ-substituted allenoates with imines, we obtained enantiomerically enriched pyrrolines in good yields with excellent enantioselectivities. These two diastereoisomeric phosphines functioned as pseudoenantiomers, providing their chiral pyrrolines with opposite absolute configurations.