Search

The orbital ordering in a three-dimensional colossal magnetoresistance manganite, namely La(sub 7/8)Sr(sub 1/8)MnO3 is investigated by applying soft X-ray linear dichroism to the Mn L edge. It is found that the cooperative Jahn-Teller distorted orthorhombic phase, which is present at a temperature of 240 K, is probably accompanied by a predominantly cross type (x(super 2)-z(super 2))/(y(super 2)-z(super 2)) orbital ordering.

The magnetic and electronic properties of incar-fullerenes Dy at the rate of [C.sub.82] and D[y.sub.2] at the rate of [C.sub.88] were investigated by X-ray core level spectroscopy techniques at resonance condition. The di-incar fullerenes and the mono-incar fullerenes have similar spin magnetic moments, while the orbital magnetic moment is larger for D[y.sub.2] at the rate of [C.sub.88].

An experimental investigation of the electronic structure of lanthanium manganite thin films is reported where La ions are partially substituted by Na ions. The experiment revealed that for different carrier doping concentrations, a significant increase in the emission of the low-energy excitations is observed.

We report a novel delithiation process for epitaxial thin films of LiCoO 2 (001) cathodes using only physical methods, based on ion sputtering and annealing cycles. Preferential Li sputtering followed by annealing produces a surface layer with a Li molar fraction in the range 0.5 < x < 1, characterized by good crystalline quality. This delithiation procedure allows the unambiguous identification of the effects of Li extraction without chemical byproducts and experimental complications caused by electrolyte interaction with the LiCoO 2 surface. An analysis by X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) provides a detailed description of the delithiation process and the role of O and Co atoms in charge compensation. We observe the simultaneous formation of Co 4+ ions and of holes localized near O atoms upon Li removal, while the surface shows a (2 × 1) reconstruction. The delithiation method described here can be applied to other crystalline battery elements and provide information on their properties that is otherwise difficult to obtain.

The intrinsic stability of the 5 V LiCoPO 4 -LiCo 2 P 3 O 10 thin-film (carbon-free) cathode material coated with MoO 3 thin layer is studied using a comprehensive synchrotron electron spectroscopy in situ approach combined with first-principle calculations. The atomic-molecular level study demonstrates fully reversible electronic properties of the cathode after the first electrochemical cycle. The polyanionic oxide is not involved in chemical reactions with the fluoroethylene-containing liquid electrolyte even when charged to 5.1 V vs Li + /Li. The high stability of the cathode is explained on the basis of the developed energy level model. In contrast, the chemical composition of the cathode-electrolyte interface evolves continuously by involving MoO 3 in the decomposition reaction with consequent leaching of oxide from the surface. The proposed mechanisms of chemical reactions are attributed to external electrolyte oxidation via charge transfer from the relevant electron level to the MoO 3 valence band state and internal electrolyte oxidation via proton transfer to the solvents. This study provides a deeper insight into the development of both a doping strategy to enhance the electronic conductivity of high-voltage cathode materials and an efficient surface coating against unfavorable interfacial chemical reactions.

Hybrid inorganic/organic heterointerfaces are promising systems for next-generation photocatalytic, photovoltaic, and chemical-sensing applications. Their performance relies strongly on the development of robust and reliable surface passivation and functionalization protocols with (sub)molecular control. The structure, stability, and chemistry of the semiconductor surface determine the functionality of the hybrid assembly. Generally, these modification schemes have to be laboriously developed to satisfy the specific chemical demands of the semiconductor surface. The implementation of a chemically independent, yet highly selective, standardized surface functionalization scheme, compatible with nanoelectronic device fabrication, is of utmost technological relevance. Here, we introduce a modular surface assembly (MSA) approach that allows the covalent anchoring of molecular transition-metal complexes with sub-nanometer precision on any solid material by combining atomic layer deposition (ALD) and selectively self-assembled monolayers of phosphonic acids. ALD, as an essential tool in semiconductor device fabrication, is used to grow conformal aluminum oxide activation coatings, down to sub-nanometer thicknesses, on silicon surfaces to enable a selective step-by-step layer assembly of rhenium(I) bipyridine tricarbonyl molecular complexes. The modular surface assembly of molecular complexes generates precisely structured spatial ensembles with strong intermolecular vibrational and electronic coupling, as demonstrated by infrared spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy analysis. The structure of the MSA can be chosen to avoid electronic interactions with the semiconductor substrate to exclusively investigate the electronic interactions between the surface-immobilized molecular complexes.

Impurity doping in silicon (Si) ultra-large-scale integration is one of the key challenges which prevent further device miniaturization. Using ultraviolet photoelectron spectroscopy and X-ray absorption spectroscopy in the total fluorescence yield mode, we show that the lowest unoccupied and highest occupied electronic states of ≤3 nm thick SiO 2 -coated Si nanowells shift by up to 0.2 eV below the conduction band and ca. 0.7 eV below the valence band edge of bulk silicon, respectively. This nanoscale electronic structure shift induced by anions at surfaces (NESSIAS) provides the means for low-nanoscale intrinsic Si (i-Si) to be flooded by electrons from an external (bigger, metallic) reservoir, thereby getting highly electron- (n-) conductive. While our findings deviate from the behavior commonly believed to govern the properties of silicon nanowells, they are further confirmed by the fundamental energy gap as per nanowell thickness when compared against published experimental data. Supporting our findings further with hybrid density functional theory calculations, we show that other group IV semiconductors (diamond, Ge) do respond to the NESSIAS effect in accord with Si. We predict adequate nanowire cross-sections (X-sections) from experimental nanowell data with a recently established crystallographic analysis, paving the way to undoped ultrasmall silicon electronic devices with significantly reduced gate lengths, using complementary metal-oxide-semiconductor-compatible materials.

Combining experimental and ab initio core-level photoelectron spectroscopy (periodic DFT and quantum chemistry calculations), we elucidated how ammonia molecules bond to the hydroxyls of the (H,OH)-Si(001) model surface at a temperature of 130 K. Indeed, theory evaluated the magnitude and direction of the N 1s (and O 1s) chemical shifts according to the nature (acceptor or donor) of the hydrogen bond and, when confronted to experiment, showed unambiguously that the probe molecule makes one acceptor and one donor bond with a pair of hydroxyls. The consistency of our approach was proved by the fact that the identified adsorption geometries are precisely those that have the largest binding strength to the surface, as calculated by periodic DFT. Real-time core-level photoemission enabled measurement of the adsorption kinetics of H-bonded ammonia and its maximum coverage (0.37 ML) under 1.5 × 10 -9 mbar. Experimental desorption free energies were compared to the magnitude of the adsorption energies provided by periodic DFT calculations. Minority species were also detected on the surface. As in the case of H-bonded ammonia, DFT core-level calculations were instrumental to attribute these minority species to datively bonded ammonia molecules, associated with isolated dangling bonds remaining on the surface, and to dissociated ammonia molecules, resulting largely from beam damage.

The electronic structures of V-intercalated TiSe 2 and substitutionally doped dichalcogenides Ti 1- x V x Se 2 have been studied using soft X-ray photoelectron, resonant photoelectron, and absorption spectroscopies. In the case of the substitution of Ti by V, the formation of coherently oriented structural fragments VSe 2 and TiSe 2 is observed and a small charge transfer between these fragments is found. Intercalation of the V atoms into TiSe 2 leads to charge transfer from the V atoms to the Ti atoms with the formation of covalent complexes Ti-Se 3 -V-Se 3 -Ti.

The comparison of the specifics of the guest-host chemical bonding in the materials with (Fe x TiSe 2 ) and without (Fe x TiTe 2 ) ordering of the iron atoms was performed. For this purpose the electronic structure of the materials were studied using X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, resonant X-ray photoelectron spectroscopy, and theoretical calculations (total density of states, partial density of states, and multiplet calculations). For the iron-intercalated TiTe 2 compound iron-chalcogen bonds are formed, whereas the formation of iron-iron bonds is most typical for the iron-intercalated TiSe 2 compound. This leads to an increase in the lifetime of electrons on the titanium atoms and does not allow the formation of atomic chains of intercalated metal.

Nanocrystalline thin films of PbS are obtained in a straightforward reaction by precipitation at the interface between toluene (containing a Pb precursor) and water (containing Na2S). Lead thiobiuret [Pb(SON(CN(i)Pr2)2)2] and lead diethyldithiocarbamate [Pb(S2CNEt2)2] precursors are used. The films are characterized by X-ray diffraction and electron microscopy, revealing typical particle sizes of 10-40 nm and preferred (200) orientation. Synchrotron-excited depth-profiling X-ray photoelectron spectroscopy (XPS) is used to determine the depth-dependent chemical composition as a function of surface aging in air for periods of up to 9 months. The as-synthesized films show a 1:1 Pb/S composition. Initial degradation occurs to form lead hydroxide and small quantities of surface-adsorbed -SH species. A lead-deficient Pb1-xS phase is produced as the aging proceeds. Oxidation of the sulfur occurs later to form sulfite and sulfate products that are highly localized at the surface layers of the nanocrystals. These species show logarithmic growth kinetics, demonstrating that the sulfite/sulfate layer acts to passivate the nanocrystals. Our results demonstrate that the initial reaction of the PbS nanocrystals (forming lead hydroxide) is incongruent. The results are discussed in the context of the use of PbS nanocrystals as light-harvesting elements in next-generation solar technology.

We investigated the magneto-optical response of chemically synthesized iron oxide magnetic nanocrystals, optically coupled with ordered planar arrays of plasmonic nanoparticles. We compare the signals from two classes of systems, featuring either Au or Ag as the plasmonic counterpart. The localized surface plasmon resonance of the Ag and Au nanoparticles arrays were superimposed or detuned, respectively, with respect to the dominant magneto-optical transitions of the magnetic material. Under resonance, a significant enhancement of the magneto-optical signal was observed. In both cases, we could separate the purely plasmonic and the magnetic contributions in the magneto-optical spectrum of the optically coupled composite based on their different magnetic-field dependence.

Here, it is demonstrated, using high-resolution X-ray spectroscopy and density functional theory calculations, that 2H-tetraphenyl porphyrins metalate at room temperature by incorporating a surface metal atom when a (sub)monolayer is deposited on 3d magnetic substrates, such as Fe(110) and Ni(111). The calculations demonstrate that the redox metalation reaction would be exothermic when occurring on a Ni(111) substrate with an energy gain of 0.89 eV upon embedding a Ni adatom in the macrocycle. This is a novel way to form, via chemical modification and supramolecular engineering, 3d-metal-organic networks on magnetic substrates with an intimate bond between the macrocycle molecular metal ion and the substrate atoms. The achievement of a complete metalation by Fe and Ni can be regarded as a test case for successful preparation of spintronic devices by means of molecular-based magnets and inorganic magnetic substrates.

The adsorption of dopamine onto an anatase TiO(2)(101) single crystal has been studied using photoemission and NEXAFS techniques. Photoemission results suggest that the dopamine molecule adsorbs on the surface in a bidentate geometry, resulting in the removal of band gap states in the TiO(2) valence band. Using the searchlight effect, carbon K-edge NEXAFS spectra indicate that the phenyl rings in the dopamine molecules are orientated normal to the surface. A combination of experimental and computational results indicates the appearance of new unoccupied states arising following adsorption. The possible role of these states in the charge-transfer mechanism of the dopamine-TiO(2) system is discussed.