Search

Liposomes are interesting scaffolds for photocatalysis. In particular, charged liposomes were shown to increase the quantum efficiency of photocatalytic reactions involving charged porphyrin photosensitizers and charged electron acceptors. In this work, the effects of adding positively charged liposomes (DMPC/eDMPCCl 1:1) on the mechanism of the photocatalytic reduction of methyl viologen (MV2+) by cysteine in the presence of sodium meso-tetra-(4-sulfonato)porphyrinatozinc (Na41) were probed by modeling UV-vis spectroscopy data using a steady-state approximation. By varying the concentration of methyl viologen, we found that the liposomes not only prevent the formation of a 1:1 complex between ground-state photosensitizer 14- and MV2+ but also that they increase the cage-escape yield in the excited state. Furthermore, the electrostatic repulsion between the liposomes and MV2+ diminishes by 1 order of magnitude the rate of oxidative quenching of the photosensitizer triplet excited state (T14-) by MV2+. By varying the amount of sacrificial electron donor (cysteine), the effect of liposome addition on the charge recombination reactions could also be studied. Because of the positive charge borne by the photoproduct MV•+, it was also repelled from the membrane, which significantly slows charge recombination at the surface of the liposome. Overall, compared to a liposome-free solution, the rates of most elementary steps of the photocatalytic reduction of MV2+ by cysteine are strongly modified when the negative photosensitizer is adsorbed on a positively charged liposome surface. These results not only explain the much higher efficiency of the liposome-containing system but also illustrate the power of supramolecular chemistry for the tuning of photocatalysis. [ABSTRACT FROM AUTHOR]

Aziridines are important structural motifs and intermediates, and several synthetic strategies for the direct aziridination of alkenes have been introduced. However, many of these strategies require an excess of activated alkene, suffer from competing side-reactions, have limited functional group tolerance, or involve precious transition metal-based catalysts. Herein, we demonstrate the direct aziridination of alkenes by combining sulfonyl azides as a triplet nitrene source with a catalytic amount of an organic dye functioning as photosensitizer. We show how the nature of the sulfonyl azide, in combination with the triplet-excited state energy of the photosensitizer, affects the aziridination yield and provide a mechanistic rationale to account for the observed dependence of the reaction yield on the nature of the organic dye and sulfonyl azide reagents. The optimized reaction conditions enable the aziridination of structurally diverse and complex alkenes, carrying various functional groups, with the alkene as the limiting reagent.

The redox interconversion between Co(III) thiolate and Co(II) disulfide compounds has been investigated experimentally and computationally. Reactions of cobalt(II) salts with disulfide ligand L 1 SSL 1 (L 1 SSL 1 = di-2-(bis(2-pyridylmethyl)amino)-ethyl disulfide) result in the formation of either the high-spin cobalt(II) disulfide compound [Co II 2 (L 1 SSL 1 )Cl 4 ] or a low-spin, octahedral cobalt(III) thiolate compound, such as [Co III (L 1 S)(MeCN) 2 ](BF 4 ) 2 . Addition of thiocyanate anions to a solution containing the latter compound yielded crystals of [Co III (L 1 S)(NCS) 2 ]. The addition of chloride ions to a solution of [Co III (L 1 S)(MeCN) 2 ](BF 4 ) 2 in acetonitrile results in conversion of the cobalt(III) thiolate compound to the cobalt(II) disulfide compound [Co II 2 (L 1 SSL 1 )Cl 4 ], as monitored with UV-vis spectroscopy; subsequent addition of AgBF 4 regenerates the Co(III) compound. Computational studies show that exchange by a chloride anion of the coordinated acetonitrile molecule or thiocyanate anion in compounds [Co III (L 1 S)(MeCN) 2 ] 2+ and [Co III (L 1 S)(NCS) 2 ] induces a change in the character of the highest occupied molecular orbitals, showing a decrease of the contribution of the p orbital on sulfur and an increase of the d orbital on cobalt. As a comparison, the synthesis of iron compounds was undertaken. X-ray crystallography revealed that structure of the dinuclear iron(II) disulfide compound [Fe II 2 (L 1 SSL 1 )Cl 4 ] is different from that of cobalt(II) compound [Co II 2 (L 1 SSL 1 )Cl 4 ]. In contrast to cobalt, reaction of ligand L 1 SSL 1 with [Fe(MeCN) 6 ](BF 4 ) 2 did not yield the expected Fe(III) thiolate compound. This work is an unprecedented example of redox interconversion between a high-spin Co(II) disulfide compound and a low-spin Co(III) thiolate compound triggered by the nature of the anion.

Four dimeric nickel(II) complexes [Ni 2 Cl 2 (BnC 2 S) 2 ] [ 1 ], [Ni 2 Cl 2 (BnC 3 S) 2 ] [ 2 ], [Ni 2 (PyC 2 S) 2 ]Br 2 [ 3 ]Br 2 , and [Ni 2 (PyC 3 S) 2 ]Br 2 [ 4 ]Br 2 of four different thiolate-functionalized N-heterocyclic carbene (NHC) ligands were synthesized, and their structures have been determined by single-crystal X-ray crystallography. The four ligands differ by the alkyl chain length between the thiolate group and the benzimidazole nitrogen (two -C 2 - or three -C 3 - carbon atoms) and the second functionality at the NHC being a benzyl (Bn) or a pyridylmethyl (Py) group. The nickel(II) ions are coordinated to the NHC carbon atom and the pendent thiolate group, which bridges to the second nickel(II) ion creating the dinuclear structure. Additionally, in compounds [ 1 ] and [ 2 ], the fourth coordination position of the square-planar Ni(II) centers is occupied by the halide ions, whereas in [ 3 ] 2+ and [ 4 ] 2+ , the additional pendant pyridylmethyl groups complete the coordination spheres of the nickel ions. The electrochemical properties of the four complexes were studied using cyclic voltammetry and controlled-potential coulometry methods. The thiolate-functionalized carbene complexes [ 1 ] and [ 2 ] appear to be poor electrocatalysts for the hydrogen evolution reaction; the complexes [ 3 ]Br 2 and [ 4 ]Br 2 , bearing an extra pyridylmethyl group, show higher catalytic activity in proton reduction, indicating that the pyridine group plays an important role in the catalytic cycle., Competing Interests: The authors declare no competing financial interest.

Ethene is a highly diffusive and relatively unreactive gas that induces aging responses in plants in concentrations as low as parts per billion. Monitoring concentrations of ethene is critically important for transport and storage of food crops, necessitating the development of a new generation of ultrasensitive detectors. Here we show that by functionalizing graphene with copper complexes biologically relevant concentrations of ethene and of the spoilage marker ethanol can be detected. Importantly, in addition these sensors provide us with important insights into the interactions between molecules, a key concept in chemistry. Chemically induced dipole fluctuations in molecules as they undergo a chemical reaction are harvested in an elegant way through subtle field effects in graphene. By exploiting changes in the dipole moments of molecules that occur upon a chemical reaction we are able to track the reaction and provide mechanistic insight that was, until now, out of reach.

A ratiometric thermometer based on a mixed-metal Ln(III) metal-organic framework is reported that has good sensitivity in a wide temperature range from 4 to 290 K and a quantum yield of 22% at room temperature. The sensing mechanism in the europium-doped compound Tb0.95Eu0.05HL (H4L = 5-hydroxy-1,2,4-benzenetricarboxylic acid) is based not only on phonon-assisted energy transfer from Tb(III) to Eu(III) centers, but also on phonon-assisted energy migration between neighboring Tb(III) ions. It shows good performance in a wide temperature range, especially in the range 4-50 K, reaching a sensitivity up to 31% K(-1) at 4 K.

The redox equilibrium between dinuclear Cu(II) μ-thiolate and Cu(I) disulfide structures has been analyzed experimentally and via DFT calculations. Two new ligands, L(2)SSL(2) and L(4)SSL(4), and their Cu(II) μ-thiolate and Cu(I) disulfide complexes were synthesized. For L(2)SSL(2), these two redox-isomeric copper species are shown to be in equilibrium, which depends on both temperature and solvent. For L(4)SSL(4) the μ-thiolate species forms as the kinetic product and further evolves into the disulfide complex under thermodynamic control, which creates the unprecedented possibility to compare both species under the same reaction conditions. The energies of the μ-thiolate and disulfide complexes for two series of related ligands have been calculated with DFT; the results rationalize the experimentally observed structures, and emphasize the important role that steric requirements play in the formation of the Cu(II) thiolate structure.

Cu(I)(Py2NS) (1) is formed by addition of Cu(I) to a solution of the pyridyl-thiol ligand N-(2-mercaptopropyl)-N,N-bis(2-pyridylmethyl)amine (Py2NSH). Oxidation of complex 1 by air leads to the formation of Cu(II) sulfinate and Cu(II) sulfonate complexes, providing a model for the oxidative degeneration of copper-sulfur enzymes. Crystal structures were obtained for two Cu(II) sulfinate complexes, [Cu(II)2(Py2NSO2)2](BF4)2·2(CH3)2CO (4a) and [Cu(II)2(Py2NSO2)2(OTf)2] (4b), which were further characterized by UV-vis and EPR spectroscopy and cyclic voltammetry. Furthermore, two Cu(II) sulfonate complexes with the proposed formulas Cu(II)2(Py2NSO3)2(BF4)2 (5a) and Cu(II)2(Py2NSO3)2(OTf)2 (5b) have been isolated and characterized. Monitoring the oxidation of 1 by UV-vis indicates that the oxidation proceeds via a dinuclear Cu(II) μ-thiolate complex (3); as an intermediate an octanuclear mixed-valent Cu(I)4Cu(II)4 cluster with formula [Cu(I)4Cu(II)4(Py2NS)4(μ-OH)2(CH3CN)6](ClO4)6·2CH3CN (2) was isolated and characterized by X-ray single crystal structure determination.

In this work the thermal and photochemical reactivity of a series of ruthenium complexes [Ru(terpy)(N-N)(L)](X)2 (terpy = 2,2';6',2″-terpyridine, L = 2-(methylthio)ethanol (Hmte) or water, and X is Cl(-) or PF6(-)) with four different bidentate chelates N-N = bpy (2,2'-bipyridine), biq (2,2'-biquinoline), dcbpy (6,6'-dichloro-2,2'-bipyridine), or dmbpy (6,6'-dimethyl-2,2'-bipyridine), is described. For each chelate N-N the thermodynamic constant of the dark equilibrium between the aqua- and Hmte- complexes, the Hmte photosubstitution quantum yield, and the rate constants of the thermal interconversion between the aqua and Hmte complexes were measured at room temperature. By changing the steric hindrance and electronic properties of the spectator N-N ligand along the series bpy, biq, dcbpy, dmbpy the dark reactivity clearly shifts from a nonlabile equilibrium with N-N = bpy to a very labile thermal equilibrium with N-N = dmbpy. According to variable-temperature rate constant measurements in the dark near pH = 7 the activation enthalpies for the thermal substitution of H2O by Hmte are comparable for all ruthenium complexes, whereas the activation entropies are negative for bpy and biq, and positive for dcbpy and dmbpy complexes. These data are indicative of a change in the substitution mechanism, being interchange associative with nonhindered or poorly hindered chelates (bpy, biq), and interchange dissociative for more bulky ligands (dcbpy, dmbpy). For the most labile dmbpy system, the thermal equilibrium is too fast to allow significant modification of the composition of the mixture using light, and for the nonhindered bpy complex the photosubstitution of Hmte by H2O is possible but thermal binding of Hmte to the aqua complex does not occur at room temperature. By contrast, with N-N = biq or dcbpy the thermodynamic and kinetic parameters describing the formation and breakage of the Ru-S bond lie in a range where the bond forms spontaneously in the dark, but is efficiently cleaved under light irradiation. Thus, the ratio between the aqua and Hmte complex in solution can be efficiently controlled at room temperature using visible light irradiation.

A systematic library of 24 nickel(II) complexes with bidentate diphosphane ligands was synthesized, and the solid-state structures of five of them were determined with X-ray crystallography. The compounds C1-C3 are common P2Ni(II)X2-type complexes, while C4 contains a unique [P2Ni(II)(NH3)(OAc)](+) square-planar structure with a P2NO donor set and C5 constitutes a rare [(P2Ni(II))2(μ-OH)2](2+) dinuclear compound. The catalytic activity of all complexes was tested in the hydrogenation and/or isomerization of 1-octene in a CH2Cl2/CH3OH reaction medium. Catalyst precursors bearing ligands with o-alkoxy aryl rings selectively hydrogentate 1-octene to n-octane, while catalytic systems comprising ligands without the o-alkoxy functionality selectively isomerize the substrate to a mixture of internal alkenes, mostly cis- and trans-2-octene. The conversion is enhanced by equipping the ligand aryl rings with electron-donating alkoxy groups, by increasing the steric bulk of the backbone and/or the aryl rings, by employing relatively noncoordinating anions, and by adding a base as the cocatalyst. Using the compound [Ni(L3X)I2] as the catalyst precursor and upon application of standard hydrogenation conditions, full conversion of the substrate was achieved in 1 h to isomerization products only (TON = 1940). When a catalytic amount of the base is added, a similar result is obtained even in the absence of H2. A maximum TON of 4500 in 1 h with 96% selectivity for n-octane was achieved by employing [Ni(oMeO-L3X)(NH3)(OAc)]PF6 as the catalyst precursor.

The three novel clusters [Mn6O4(OMe)2(OAc)4(Mesalim)4] (3), [Mn8O2(OH)2(OMe)12(OAc)2(Mesalim)4] (4), and [Fe10O4(OMe)14Cl2(Mesalim)6] (5) have been synthesized from a simple bidentate ligand HMesalim (HMesalim = methyl salicylimidate). Starting from the mononuclear complex [Mn(Mesalim)2(OAc)(MeOH)].MeOH (1), either the hexanuclear complex 3 or the octanuclear complex 4 is obtained after recrystallization, depending upon the reaction conditions and solvents used. Similarly, starting from the purple-colored mononuclear complex [Fe(Mesalim)2Cl] (2), the orange-colored decanuclear iron(III) cluster 5 has been obtained upon recrystallization from methanol. Complex 3, which could also be prepared directly from manganese acetate and the ligand, has a face-sharing double-cubane [Mn6O6] core, unique in transition metal chemistry. Compounds 4 and 5 are composed of [M3O4] partial cubanes. All complexes belong to a class of oxo-bridged cubic close-packed molecular clusters resembling the metal oxide/hydroxide ores. Complex 4 exhibits intramolecular ferromagnetic interactions, as evidenced from dc magnetic susceptibility studies (1.8-300 K), resulting in a high-spin ground state, probably with S(T) = 8. Complex 4 displays single molecule magnet behavior as indicated by frequency and temperature dependences of its ac susceptibility. An Arrhenius plot gave relatively large experimental activation energy of 36.0 K. The magnetic properties of complexes 3 and 5 are dominated by antiferromagnetic interactions leading to zero-spin ground states.

Manganese complexes of the ligand HphoxCOOR (R=H or Me) have been synthesized and characterized by X-ray analysis, ESI-MS, ligand-field spectroscopy, electrochemistry, and paramagnetic 1H NMR. The ligands, chirally pure or racemic, influence the structures of the complexes formed. Manganese(III) complexes of the ligand HphoxCOOMe are square-pyramidal or octahedral with two ligands bound in a trans fashion in the solid state. The racemic ligand (RS-HphoxCOOMe) as well as the enantiopure ligand (R-HphoxCOOMe) forms manganese complexes with similar solid-state structures. Ligand-exchange reactions occur in solution giving rise to meso complexes as confirmed by ESI-MS and deuteration studies. The manganese(III) complex of R-HphoxCOOH is octahedral, with two dianionic ligands bound in a fac-cct fashion in a tridentate manner. The manganese(III) complex of RS-HphoxCOOH is also octahedral with two dianionic ligands now bound in a trans fashion in a didentate manner and with two water molecules occupying axial sites. The paramagnetic 1H NMR spectra of the complexes have been interpreted on the basis of the relaxation times with the help of the inversion-recovery pulse technique. The binding of imidazole with the metal center depends on the chirality of the ligands in the metal complexes of HphoxCOOMe. Imidazole coordination was found to occur with the metal complex that contains two ligands with the same chirality (R and R) (R-1), while no imidazole coordination was found upon reaction with the metal complex that contains two ligands with opposite chirality (R and S) (RS-1). Epoxidation reactions of various alkenes with H2O2 as the oxidant reveal that the complexes give turnover numbers in the range of 10-35, the epoxide being the major product. The catalytic activity depends on the additives used, and a clear base effect is observed. The turnover numbers have been found to be higher in the complexes where no binding of N-Meim is observed. The latter fact unambiguously shows that imidazole binding is not a prerequisite for higher turnover numbers, in contrast to the Mn-Schiff base catalysts.

The reaction of Cu(ClO(4))(2).6H(2)O with the new tripodal ligand HNpy(2)pz (N-bis[(pyridin-2-yl)methyl][1H-pyrazol-3-yl)methyl]amine) in the presence of 1 equiv of triethylamine results in the formation of a doubly pyrazolato-bridged dicopper(II) complex, [Cu(Npy(2)pz)](2)(ClO(4))(2).2CH(3)CN (1). The crystal structure of 1 was determined by X-ray crystallography and was found to consist of two nearly identical discrete dinuclear molecules with bis(pyrazolato) bridges. The copper(II) ion has a trigonal bipyramid geometry achieved by the coordination of an aliphatic nitrogen, two pyridine moieties, and two pyrazolato nitrogens. Variable temperature-dependent magnetic data show that antiferromagnetic interactions operate in 1 as a result of the binding angle of the pyrazolato bridge. In solution, the stability of the dinuclear cation, [Cu(py(2)pz)](2)(2+), is highly dependent on the concentration, as indicated by ESI-MS, ligand field, cyclic voltammetry, EPR, and (1)H NMR studies.

It has been found that [Mn(acac)(3)], by functioning both as a radical initiator and a hydroperoxide decomposition catalyst, has a very high activity in the autoxidation of ethyl linoleate (EL), a model compound for the binder molecule in household alkyd paint. Adding 1 equiv of bipyridine (bpy) to a reaction mixture of EL and [Mn(acac)(3)] significantly enhances the autoxidation rate. The redox properties of [Mn(acac)(3)] and [Mn(acac)(2)(bpy)] have been compared with cyclic voltammetry; the observed peak potentials show that addition of bpy facilitates reduction of Mn(III) to Mn(II), which may explain the increase in autoxidation activity.

Complex 1 [(N,N'-dimethyl-N,N'-bis(2-sulfanylethyl)ethylenediamine)nickel(II)], previously shown to react with H(2)O(2) to produce the fully oxygenated disulfonate 5 [diaqua(N,N'-dimethyl-N,N'-bis(2-sulfonatoethyl)ethylenediamine)nickel(II)], has been explored in detail to explain the observed reactivity of this compound and to discern intermediates in the oxygenation reaction. Reaction of 1 with 1 equiv of methyl iodide results in the monomethylated square-planar nickel complex 2 [[(N,N'-dimethyl-N-(2-sulfanylethyl)-N'-(2-methylthioethyl)(ethylenediamine)nickel(II)] iodide], while a slight excess of methyl iodide results in the dimethylated complex 3 [diiodo(N,N'-dimethyl-N,N'-bis(2-methylthioethyl)ethylenediamine)nickel(II)], an X-ray structure of which has shown that the nickel ion is in an octahedral N(2)S(2)I(2) environment. Crystal data of 3: monoclinic, a = 8.865(3) A, b = 14.419(4) A, c = 14.389(6) A, beta = 100.19(3) degrees, V = 1810.2(12) A(3), space group P2(1)/n, Z = 4. The equatorial positions are occupied by the two cis-amine N-atoms and the coordinated iodides, while the axial positions are occupied by the thioether sulfur atoms. In organic solvents, the dithiolate complex 1 reacts with molecular oxygen or H(2)O(2) to produce the mixed sulfinato/thiolato complex 4 [(N,N'-dimethyl-N-(2-sulfanylethyl)-N'-(2-sulfinatoethyl)(ethylenediamine)nickel(II)], and the fully oxidized product 5. X-ray analysis of complex 4 reveals a square-planar geometry in which the nickel ion is coordinated by two cis-amine nitrogens, one thiolate sulfur donor, and one sulfinato sulfur donor. Crystal data of 4: orthorhombic, a = 11.659(2) A, b = 13.119(3) A, c = 16.869(3) A, V = 2580.2(9) A(3), space group Pbca, Z = 8. This complex is the only intermediate in the oxygenation reaction that could be isolated, and it is shown to be further reactive toward O(2) to yield the fully oxidized product 5. For a better understanding of the reactivity observed for 4, DFT calculations have been undertaken, which show a possible reaction path toward the fully oxidized product 5.

The synthesis of a number of nickel(II) complexes containing the didentate phosphane ligand 1,2-bis(di(o-methoxyphenyl)phosphino)ethane (o-MeO-dppe) is reported. Two types of complexes have been synthesized, i.e., the mono(chelate) complex (1) of the general formula [Ni(o-MeO-dppe)X2] (where X = Cl, Br or I) and the bis(chelate) complex (2) of the general formula [Ni(o-MeO-dppe)2]Y2 (where Y = PF6 or trifluoroacetate (TFA)). These complexes have been characterized using electronic absorption and NMR spectroscopy. The structures of the mono(chelate) complex [Ni(o-MeO-dppe)I2] (1c) and of the bis(chelate) complex [Ni(o-MeO-dppe)2](PF6)2 (2e) have been determined by X-ray crystallography. [Ni(o-MeO-dppe)I2] crystallizes in the monoclinic space group P2(1)/c with Z = 4, a = 12.1309(1) A, b = 16.5759(3) A, c = 17.6474(2) A, beta = 119.3250(10) degrees. [Ni(o-MeO-dppe)2](PF6)2 crystallizes in the monoclinic space group C2/c with Z = 4, a = 22.5326(3) A, b = 13.6794(2) A, c = 21.7134(3) A, beta = 107.1745(7) degrees. In both structures the nickel ion is in a square-planar geometry with a NiP2I2 and NiP4 chromophore, respectively. Using 1H and 31P[1H] NMR spectroscopy the behavior of the complexes in various solvents has been studied. It appears that in solution these nickel complexes are involved in an autoionization equilibrium: 2[Ni(o-MeO-dppe)X2] <==>[Ni(o-MeO-dppe)2](2+) + ["NiX(4)"](2-). The ionized complex (3) consists of a cationic unit in which a nickel atom is surrounded by two didentate phosphane ligands, and an anionic unit that stoichiometrically consists of a nickel atom and four anions. The position of the autoionization equilibrium is highly dependent on the anion and the solvent used. In a polar solvent in combination with weakly coordinating anions only the ionized complex is observed, whereas in an apolar solvent in combination with coordinating anions only the mono(chelate) complex occurs. A comparison of the behavior of o-MeO-dppe with its unsubstituted analogue dppe in combination with nickel(II) acetate using 31P[1H] NMR spectroscopy shows that the latter is more readily oxidized.