Search

A series of Li, Na, Mg, and Ca complexes with 2,6-di-tert-butyl-4-methylphenol (BHT) as the ligand has been synthesized,and their reactivity for the ring-opening polymerization of lactidehas been studied. The Ca complex with 2,2′-ethylidenebis(4,6-di-tert-butylphenol) (EDBP) as the ligand also has been synthesizedto compare with the BHT systems. All complexes, in the presence ofbenzyl alcohol as initiator, exhibit high activity for the ring-openingpolymerization of lactide. Polymerization activities follow the orderof Na ≫ Li > Ca ≫ Mg. Additionally, metal–BHTsystems are more efficient than metal–EDBP systems, and thissuperiority was pronounced in THF solution. Four model metal–BHTcomplexes with coordinated dimethoxyethane (DME) have been characterizedby single-crystal X-ray diffraction. These complexes exhibited a widevariation in the Cipso–O–metal angle (159.3°to 180.0°), and DFT calculations suggested that this flexibilityallows the metal to vary its electron density and thereby expeditethe catalytic cycle that requires both monomer activation and substratelability. [ABSTRACT FROM AUTHOR]

Trinuclear aluminum complexes bearing bipyrazoles were synthesized, and their catalytic activity for ε-caprolactone (CL) polymerization was investigated. D Bu 2 Al 3 Me 5 exhibited higher catalytic activity than did the dinuclear aluminum complex L Bu 2 Al 2 Me 4 (16 times as high for CL polymerization; [CL]:[ D Bu 2 Al 3 Me 5 ]:[BnOH] = 100:0.5:5, [ D Bu 2 Al 3 Me 5 ] = 10 mM, conversion 93% after 18 min at room temperature). Density functional theory calculations revealed a polymerization mechanism in which CL first approached the central Al atom and then moved to an external Al. The coordinated CL ring was opened because the repulsion of two tert -butyl groups on the ligands pushed an alkoxide initiator on an external Al to initiate CL. In these trinuclear Al catalysts, the central Al plays a role in monomer capture and then collaborates with the external Al to activate CL, accelerating polymerization.

A series of dinuclear aluminum (Al 2 Pyr 2 ) complexes bridged by two pyrazole ligands were synthesized, and their catalytic activity toward ring-opening polymerization of ε-caprolactone (CL) was investigated. Different types of the Al-N-N-Al-N-N skeletal ring were found among these Al 2 Pyr 2 complexes. The butterfly form, L Thio 2 Al 2 Me 4 , exerted the highest catalytic activity for CL polymerization. κ 2 -CL coordination with both Al centers within the butterfly form L Thio 2 Al 2 Me 4 facilitates the initiation process. Generally speaking, the Al 2 Pyr 2 complexes exhibited substantially higher catalytic activity for CL polymerization than literature examples such as β-diketiminate- or traiaza-bearing aluminum complexes. In fact, the Al 2 Pyr 2 complexes can even carry out CL polymerization at room temperature.

β-Diketiminato copper(I) complexes play important roles in bioinspired catalytic chemistry and in applications to the materials industry. However, it has been observed that these complexes are very susceptible to disproportionation. Coordinating solvents or Lewis bases are typically used to prevent disproportionation and to block the coordination sites of the copper(I) center from further decomposition. Here, we incorporate this coordination protection directly into the molecule in order to increase the stability and reactivity of these complexes and to discover new copper(I) binding motifs. Here we describe the synthesis, structural characterization, and reactivity of a series of unsymmetrical N-aryl-N'-alkylpyridyl β-diketiminato copper(I) complexes and discuss the structures and reactivity of these complexes with respect to the length of the pyridyl arm. All of the aforementioned unsymmetrical ß-diketiminato copper(I) complexes bind CO reversibly and are stable to disproportionation. The binding ability of CO and the rate of pyridyl ligand decoordination of these copper(I) complexes are directly related to the competition between the degree of puckering of the chelate system and the steric demands of the N-aryl substituent.

A series of titanium (Ti) complexes bearing hydrazine-bridging Schiff base ligands were synthesized and investigated as catalysts for the ring-opening polymerization (ROP) of L-lactide (LA). Complexes with electron withdrawing or steric bulky groups reduced the catalytic activity. In addition, the steric bulky substituent on the imine groups reduced the space around the Ti atom and then reduced LA coordination with Ti atom, thereby reducing catalytic activity. All the dinuclear Ti complexes exhibited higher catalytic activity (approximately 10-60-fold) than mononuclear L(Cl-H)-TiOPr2 did. The strategy of bridging dinuclear Ti complexes with isopropoxide groups in the ROP of LA was successful, and adjusting the crowded heptacoordinated transition state by the bridging isopropoxide groups may be the key to our successful strategy.

A series of sodium complexes bearing NNO-tridentate Schiff base ligands with an N-pendant arm were synthesized and used as catalysts for the ring-opening polymerization of L-lactide (L-LA). Electronic effects of ancillary ligands coordinated by sodium complexes substantially influence the catalysis, and ligands with electron-donating groups increase the catalytic activity of the sodium complexes for catalyzing L-LA polymerization. In particular, a sodium complex bearing a 4-methoxy group has the highest activity with conversion up to 95% within 30 s at 0 °C and a low polydispersity index of 1.13, whereas the 4-bromo group showed the poorest performance with regard to the catalytic rate of L-LA polymerization in the presence of benzyl alcohol (BnOH). (1)H NMR pulsed-gradient spin-echo diffusion experiments and single-crystal X-ray analyses showed that sodium complexes [L(H)Na(THF)]2 and [L(4-Cl)Na(THF)]2 were dinuclear species in both solution and the solid state. The kinetic results indicated a first-order dependence on each of [[L(4-Cl)Na]2], [l-LA], and [BnOH].

A series of Al complexes bearing Schiff base and thio-Schiff base ligands were synthesized, and their application for the ring-opening polymerization of ε-caprolactone (CL) and l-lactide (LA) was studied. It was found that steric effects of the ligands caused higher polymerization rate and most importantly the Al complexes with N,S-Schiff base showed significantly higher polymerization rate than Al complexes with N,O-Schiff base (5-12-fold for CL polymerization and 2-7-fold for LA polymerization). The reaction mechanism of CL polymerization was investigated by density functional theory (DFT). The calculations predicted a lower activation energy for a process involved with an Al complex bearing an N,S-Schiff base ligand (17.6 kcal/mol) than for that of an Al complex bearing an N,O-Schiff base ligand (19.0 kcal/mol), and this magnitude of activation energy reduction is comparable to the magnitude of rate enhancement observed in the experiment. The reduction of activation energy was attributed to the catalyst-substrate destabilization effect. Using a sulfur-containing ligand to decrease the activation energy in the ring-opening polymerization process may be a new strategy to design a new Al complex with high catalytic activity.

Chondroitin sulfate-g-poly(ε-caprolactone) (CP) copolymers were synthesized via atom transfer radical addition (ATRA). The CP copolymers self-assembled into micelles in water, and the micelles could be used to encapsulate a hydrophobic anticancer drug, camptothecin (CPT), in the core for tumor targeting delivery. The physicochemical properties of the micelles and CPT-loaded micelles were thoroughly characterized. For the in vitro test, the CPT release, the protection of the lactone ring of CPT from hydrolysis and the cellular uptake of CPT were studied. The cell-killing and apoptosis-inducing effects using the CPT-loaded micelles were significantly better than using free CPT against CRL-5802 cells. The micellar internalization into CRL-5802 cells was primarily via CD44 and clathrin dual-mediated endocytosis. For the in vivo test, the therapeutic efficacy of the CPT-loaded micelles was studied in a non-small-cell lung cancer xenograft animal model. The CPT-loaded micelles showed good inhibition in tumor growth as compared with a commercial product, CPT-11, in CRL-5802 tumor-bearing mice. The in vitro and in vivo data suggested the CP-based micelles are promising anticancer drug vehicles for lung cancer targeting.

The new copper(I) nitro complex [(Ph(3)P)(2)N][Cu(HB(3,5-Me(2)Pz)(3))(NO(2))] (2), containing the anionic hydrotris(3,5-dimethylpyrazolyl)borate ligand, was synthesized, and its structural features were probed using X-ray crystallography. Complex 2 was found to cocrystallize with a water molecule, and X-ray crystallographic analysis showed that the resulting molecule had the structure [(Ph(3)P)(2)N][Cu(HB(3,5-Me(2)Pz)(3))(NO(2))]·H(2)O (3), containing a water hydrogen bonded to an oxygen of the nitrite moiety. This complex represents the first example in the solid state of an analogue of the nitrous acid intermediate (CuNO(2)H). A comparison of the nitrite reduction reactivity of the electron-rich ligand containing the CuNO(2) complex 2 with that of the known neutral ligand containing the CuNO(2) complex [Cu(HC(3,5-Me(2)Pz)(3))(NO(2))] (1) shows that reactivity is significantly influenced by the electron density around the copper and nitrite centers. The detailed mechanisms of nitrite reduction reactions of 1 and 2 with acetic acid were explored by using density functional theory calculations. Overall, the results of this effort show that synthetic models, based on neutral HC(3,5-Me(2)Pz)(3) and anionic [HB(3,5-Me(2)Pz)(3)](-) ligands, mimic the electronic influence of (His)(3) ligands in the environment of the type II copper center of copper nitrite reductases (Cu-NIRs).

A series of heterobimetallic titanium(IV) complexes [LTi(O(i)Pr)(mu-O(i)Pr)(2)Li(THF)(2)], [LTi(O(i)Pr)(mu-O(i)Pr)(2)Na(THF)(2)], [LTi(mu-O(i)Pr)(2)Zn(O(i)Pr)(2)], and [LTi(mu-O(i)Pr)(2)Mg(O(i)Pr)(2)] (where L = bidentate bisphenol ligands) have been synthesized and characterized including a structural determination of [L(1)Ti(mu(2)-O(i)Pr)(2)(O(i)Pr)Li(THF)(2)] (1a). These complexes were investigated for their utility in the ring-opening polymerization (ROP) of l-lactide (LA). Polymerization activities have been shown to correlate with the electronic properties of the substituent within the bisphenol ligand. In contrast to monometallic titanium initiator 1e, all the heterobimetallic titanium initiators (Ti-Li, Ti-Na, Ti-Zn, and Ti-Mg) show enhanced catalytic activity toward ring-opening polymerization (ROP) of l-LA. In addition, the use of electron-donating methoxy or methylphenylsulfonyl functional ligands reveals the highest activity. The bisphenol bimetallic complexes give rise to controlled ring-opening polymerization, as shown by the linear relationship between the percentage conversion and the number-average molecular weight. The polymerization kinetics using 2c as an initiator were also studied, and the experimental results indicate that the reaction rate is first-order with respect to both monomer and catalyst concentration with a polymerization rate constant, k = 81.64 M(-1) min(-1).

Photophysical properties such as absorption and emission spectra, lifetimes, and redox potentials of eight ruthenium complexes, Ru(LL)2(MebpyCOOH)2+, where LL represents bpy, phen, Me2bpy, Me4bpy, (MeO)2bpy, (EtO)2bpy, Cl2bpy, and NO2phen, have been measured. The acid dissociation constants of ground and excited states have been determined. The ground-state pKa values were obtained from the pH dependence of the complex absorbance changes. The excited-state pKa* values were extracted from the emission titration curve and corrected for the excited-state lifetime of both protonated and deprotonated species. The largest DeltapKa, pKa*-pKa, found for Ru(Me2bpy)2(MebpyCOOH)2+ and Ru(Me4bpy)2(MebpyCOOH)2+ of 1.7 indicate that MebpyCOOH gains most of the MLCT excited-state electron. The big negative DeltapKa found for Ru(Cl2bpy)2(MebpyCOOH)2+, -4.2, clearly indicates the metal-to-ligand charge transfer to the Cl2bpy ligands.