Search

Nanoscale heterojunction networks are increasingly regarded as promising functional materials for a variety of optoelectronic and photocatalytic devices. Despite their superior charge-carrier separation efficiency, a major challenge remains in the optimization of their surface properties, with surface defects playing a major role in charge trapping and recombination. Here, we report the effective engineering of the photocatalytic properties of nanoscale heterojunction networks via deep ultraviolet photoactivation throughout their cross-section. For the first time, in-depth XPS analysis of very thick (∼10 μm) Ni x O y -ZnO films reveals localized p-n nanoheterojunctions with tunable oxygen vacancies (V o ) originating from both Ni x O y and ZnO nanocrystals. Optimizing the amount of oxygen vacancies leads to a 30-fold increase in the photochemoresistive response of these networks, enabling the detection of representative analyte concentrations down to 2 and 20 ppb at an optimal temperature of 150 °C and room temperature, respectively. Density functional theory calculations reveal that this performance enhancement is presumably due to an 80% increase in the analyte adsorption energy. This flexible nanofabrication approach in conjunction with straightforward vacancy control via photoactivation provides an effective strategy for engineering the photocatalytic activity of porous metal oxide semiconductor networks with applications in chemical sensors, photodetectors, and photoelectrochemical cells.

In this research, we report the rapid and reliable formation of high-performance nanoscale bilayer oxide dielectrics on silicon substrates via low-temperature deep ultraviolet (DUV) photoactivation. The optical analysis of sol-gel aluminum oxide films prepared at various concentrations reveals the processable film thickness with DUV photoactivation and its possible generalization to the formation of various metal oxide films on silicon substrates. The physicochemical and electrical characterizations confirm that DUV photoactivation accelerates the efficient formation of a highly dense aluminum oxide and aluminum silicate bilayer (17 nm) on heavily doped silicon at 150 °C within 5 min owing to the efficient thermal conduction on silicon, resulting in excellent dielectric properties in terms of low leakage current (∼10 -8 A/cm 2 at 1.0 MV/cm) and high areal capacitance (∼0.4 μF/cm 2 at 100 kHz) with narrow statistical distributions. Additionally, the sol-gel bilayer oxide dielectrics are successfully combined with a sol-gel indium-gallium-zinc oxide semiconductor via two successive DUV photoactivation cycles, leading to the efficient fabrication of solution-processed oxide thin-film transistors on silicon substrates with an operational voltage below 0.5 V. We expect that in combination with large-area printing, the bilayer oxide dielectrics are beneficial for large-area solution-based oxide electronics on silicon substrates, while DUV photoactivation can be applied to various types of solution-processed functional metal oxides such as phase-transition memories, ferroelectrics, photocatalysts, charge-transporting interlayers and passivation layers, etc. on silicon substrates.

A helical configuration confers a great advantage in artificial muscle due to great movement potential. However, most helical fibers are exposed to a high temperature to produce the coiled helical structure. Hence, thermoset polymer-composed hydrogels are difficult to fabricate as helical fibers due to their thermal degeneration. Here, we describe a self-helical hydrogel fiber that is produced without thermal exposure as a glucose-responsive artificial muscle. The sheath-core fiber was spontaneously transformed into the helical structure during the swelling state by balancing the forces between the untwisting force of the twisted nylon fiber core and the recovery force of the hydrogel sheath. To induce controllable actuation, we also applied a reversible interaction between phenylboronic acid and glucose to the self-helical hydrogel. Consequently, the maximum tensile stroke was 2.3%, and the performance was six times greater than that of the nonhelical fiber. The fiber also exhibited tensile stroke with load and a maximum work density of 130 kJ/m 3 . Furthermore, we showed a reversible tensile stroke in response to the change in glucose level. Therefore, these results indicate that the self-helical hydrogel fiber has a high potential for use in artificial muscles, glucose sensors, and drug delivery systems.

Spider silks represent stretchable and contractible fibers with high toughness. Those tough fibers with stretchability and contractibility are attractive as energy absorption materials, and they are needed for wearable applications, artificial muscles, and soft robotics. Although carbon-based materials and poly(vinyl alcohol) (PVA) composite fibers exhibit high toughness, they are still limited in low extensibility and an inability to operate in the wet-state condition. Herein, we report stretchable and contractible fiber with toughness that is inspired by the structure of spider silk. The bioinspired tough fiber provides 495 J/g of gravimetric toughness, which exceeds 165 J/g of spider silk. Besides, the tough fiber was reversibly stretched to ∼80% strain without damage. This toughness and stretchability are realized by hybridization of aligned graphene oxide/multiwalled carbon nanotubes in a polyurethane matrix as elastic amorphous regions and β-sheet segments of spider silk. Interestingly, the bioinspired tough fiber contracted up to 60% in response to water and humidity similar to supercontraction of the spider silk. It exhibited 610 kJ/m 3 of contractile energy density, which is higher than previously reported moisture driven actuators. Therefore, this stretchable and contractible tough fiber could be utilized as an artificial muscle in soft robotics and wearable devices.

A new donor (D)-acceptor (A) type naphthalene-based oxazepine-containing fluorophore, OXN-1, is reported, which shows unusually high stability in various environments. Its photophysical properties and structural stabilities under harsh conditions are thoroughly examined. The high stability of OXN-1 is explained by quantum chemical calculations. Its exceptional bioimaging capabilities for cells with low cytotoxicity are verified. In addition, its deep tissue imaging ability with two-photon microscopy (TPM) is evaluated.

An immunochromatography (ICG) strip test for rapid detection of atrazine in water samples was developed. A monoclonal antibody (MAb) specific to atrazine was produced from the cloned hybridoma cell (AT-1-M3) and used to develop a direct competitive enzyme-linked immunosorbent assay (DC-ELISA) and ICG strip. MAb conjugated to colloidal gold, and that was applied to the conjugate pad of the ICG strip. The visual detection limit for the ICG strip was 3 ng/mL. This test required only 10 min to get results and one step of sample to perform the assay. The results of water samples spiked with 5, 10, 20, and 50 ng/mL of atrazine by ICG strip were in good agreement with those obtained by DC-ELISA. The ICG strip was sufficiently sensitive and accurate to be useful for rapid screening of atrazine in various water samples.

The development and application of a new ion detection method based on the electroacoustic (EA) effect is described. An EA signal, produced by applying a pulsed-type electric field to an electrolyte solution in an electroacoustic cell, is dependent on the electrical and thermal properties of the electrolyte and can be detected by using a conventional gas microphone system. The EA signals, generated in this fashion, are proportional to the square of the amplitude of the pulsed-type electric field and show an inverse dependence on the modulated frequency, as found in other acoustic detection systems. The results of this study demonstrate that the EA signals observed with the new system display a linear dependence on the concentration of the electrolyte over a 3 order-of-magnitude concentration range (ca. 10(-7)-10(-4) M). The detection limit of this system was shown to be as low as 29.9 ppb for an aqueous solution of HCl. The results also indicate that the EA signal is proportional to the equivalent conductivity of electrolytes in aqueous solution. As a consequence, the new method has the potential of being used as a universal detector for ions in solutions. An important property of this detection system is that it can be applied to in situ ion detection, and as a result, it can be employed in kinetic studies to follow the progress of ionic chemical reactions.