Search

The protective properties of trehalose on cholestrol-containing lipid dipalmitoylphosphatidylcholine (DPPC) are studied through molecular simulations. Such a phenomenon suggests that trehalose can inhibit changes in lateral organization of the bilayer components, which is vital in preventing leakage during preservation procedures.

There is considerable interest in developing multimodal characterization frameworks capable of probing critical properties of complex materials by relying on distinct, complementary methods or tools. Any such framework should maximize the amount of information that is extracted from any given experiment and should be sufficiently powerful and efficient to enable on-the-fly analysis of multiple measurements in a self-consistent manner. Such a framework is demonstrated in this work in the context of self-assembling polymeric materials, where theory and simulations provide the language to seamlessly mesh experimental data from two different scattering measurements. Specifically, the samples considered here consist of diblock copolymers (BCP) that are self-assembled on chemically nanopatterned surfaces. The copolymers microphase separate into ordered lamellae with characteristic dimensions on the scale of tens of nanometers that are perfectly aligned by the substrate over macroscopic areas. These aligned lamellar samples provide ideal standards with which to develop the formalism introduced in this work and, more generally, the concept of high-information-content, multimodal experimentation. The outcomes of the proposed analysis are then compared to images generated by 3D scanning electron microscopy tomography, serving to validate the merit of the framework and ideas proposed here. [ABSTRACT FROM AUTHOR]

The achievement of sufficient dispersion of vulcanization accelerators is critical to tailoring superior cross-linked elastomers. Modern recipes rely on multicomponent formulations with silica particles covered by coupling agents. We study the molecular properties of select accelerators in polyisoprene melts and their affinity for functionalized surfaces via extensive all-atom molecular dynamics simulations. We focus on the common ( N -cyclohexyl)-2-benzothiazole sulfenamide (CBS), 1,6-bis( N , N -dibenzylthiocarbamoyldithio)hexane (DBTH), and diphenyl guanidine (DPG) molecules and their mixing characteristics at curing temperatures. Our results support a low self-association affinity for CBS and DBTH within polyisoprene, whereas DPG forms small hydrogen-bonded aggregates. Subsequently, we examine systems in contact with silica interfaces, bare or grafted with (3-mercaptopropyl)triethoxysilane (MPTES), (3-octanoylthio) 1-propyl-triethoxysilane (NXT), and bis[3-(triethoxysilyl)propyl]disulfide (TESPD). Accelerator-substrate affinity is first assessed at infinite dilution using free energy calculations and subsequently at finite concentrations. Accelerators exhibit high substrate affinity (DPG > CBS > DBTH) irrespective of functionalization. However, coupling agents are able to displace from the surface a significant amount that increases with the grafting density and the size of the coupling agent. Finally, we investigate the behavior of DPG in binary DPG-CBS formulations, where the former can act as a covering agent that solubilizes CBS into the bulk polymer.

Molecular dynamics in ultrathin layers is investigated using nanostructured electrodes to perform broadband dielectric spectroscopy measurements, and by atomistic molecular dynamics simulations. Using poly(vinyl acetate) as the model system and taking advantage of access to the distribution of relaxation times in an extended temperature range above the glass transition temperature, T g , we demonstrate that while the mean rates of the segmental relaxation remain bulklike down to 12 nm film thickness, modified molecular mobilities arise in the interfacial zones. Combining results from simulations and experiments, we show unambiguously that both the slow relaxations arising from adsorbed polymer segments and the faster modes attributed to segments in the vicinity of the free interface have non-Arrhenius temperature activation. These interfacial regions span thicknesses of ∼1.5 nm each just above the calorimetric T g independent of molecular weight and film thickness. These deviations at interfaces are relevant for applications of polymers in adhesion, coatings, and polymer nanocomposites.

Characterization of the three-dimensional (3D) structure in directed self-assembly (DSA) of block copolymers is crucial for understanding the complex relationships between the guiding template and the resulting polymer structure so DSA could be successfully implemented for advanced lithography applications. Here, we combined scanning transmission electron microscopy (STEM) tomography and coarse-grain simulations to probe the 3D structure of P2VP-b-PS-b-P2VP assembled on prepatterned templates using solvent vapor annealing. The templates consisted of nonpreferential background and raised guiding stripes that had PS-preferential top surfaces and P2VP-preferential sidewalls. The full 3D characterization allowed us to quantify the shape of the polymer domains and the interface between domains as a function of depth in the film and template geometry and offered important insights that were not accessible with 2D metrology. Sidewall guiding was advantageous in promoting the alignment and lowering the roughness of the P2VP domains over the sidewalls, but incommensurate confinement from the increased topography could cause roughness and intermittent dislocations in domains over the background region at the bottom of the film. The 3D characterization of bridge structures between domains over the background and breaks within domains on guiding lines sheds light on possible origins of common DSA defects. The positional fluctuations of the PS/P2VP interface between domains showed a depth-dependent behavior, with high levels of fluctuations near both the free surface of the film and the substrate and lower fluctuation levels in the middle of the film. This research demonstrates how 3D characterization offers a better understanding of DSA processes, leading to better design and fabrication of directing templates.

Understanding and controlling the three-dimensional structure of block copolymer (BCP) thin films is critical for utilizing these materials for sub-20 nm nanopatterning in semiconductor devices, as well as in membranes and solar cell applications. Combining an atomic layer deposition (ALD)-based technique for enhancing the contrast of BCPs in transmission electron microscopy (TEM) together with scanning TEM (STEM) tomography reveals and characterizes the three-dimensional structures of poly(styrene-block-methyl methacrylate) (PS-b-PMMA) thin films with great clarity. Sequential infiltration synthesis (SIS), a block-selective technique for growing inorganic materials in BCPs films in an ALD tool and an emerging technique for enhancing the etch contrast of BCPs, was harnessed to significantly enhance the high-angle scattering from the polar domains of BCP films in the TEM. The power of combining SIS and STEM tomography for three-dimensional (3D) characterization of BCP films was demonstrated with the following cases: self-assembled cylindrical, lamellar, and spherical PS-b-PMMA thin films. In all cases, STEM tomography has revealed 3D structures that were hidden underneath the surface, including (1) the 3D structure of defects in cylindrical and lamellar phases, (2) the nonperpendicular 3D surface of grain boundaries in the cylindrical phase, and (3) the 3D arrangement of spheres in body-centered-cubic (BCC) and hexagonal-closed-pack (HCP) morphologies in the spherical phase. The 3D data of the spherical morphologies was compared to coarse-grained simulations and assisted in validating the simulations' parameters. STEM tomography of SIS-treated BCP films enables the characterization of the exact structure used for pattern transfer and can lead to a better understating of the physics that is utilized in BCP lithography.

The depth-dependent structure of a poly(styrene- b -methylmethacrylate) (PS-PMMA) line grating (46 nm pitch) was calculated from quantitative analysis of small-angle X-ray scattering profiles. These data demonstrate that domain shapes are significantly deformed near the substrate interface, where the local PS domain shape resembles an hourglass. The bulk equilibrium dimension is recovered near the center of a 64 nm thick film. Simulations based on self-consistent field theory suggest that deformations near the substrate are caused by extensive penetration of the copolymer domains into the underlying substrate coating (a PS-brush). These findings suggest that new coatings for block copolymer directed self-assembly should consider copolymer penetration lengths in addition to tailoring surface energetics. Furthermore, given the resolution and ensemble-averaging features of synchrotron X-ray scattering, we argue that it has the potential to emerge as a "gold-standard" or "benchmark" dimensional metrology and library validation tool for high density, sub-10 nm features.

The protective properties of trehalose on cholesterol-containing lipid dipalmitoylphosphatidylcholine (DPPC) bilayers are studied through molecular simulations. The ability of the disaccharide to interact with the phospholipid headgroups and stabilize the membrane persists even at high cholesterol concentrations and restricts some of the changes to the structure that would otherwise be imposed by cholesterol molecules. Predictions of bilayer properties such as area per lipid, tail ordering, and chain conformation support the notion that the disaccharide decreases the main melting transition in these multicomponent model membranes, which correspond more closely to common biological systems than pure bilayers. Molecular simulations indicate that the membrane dynamics are slowed considerably by the presence of trehalose, indicating that high sugar concentrations would serve to avert possible phase separations that could arise in mixed phospholipid systems. Various time correlation functions suggest that the character of the modifications in lipid dynamics induced by trehalose and cholesterol is different in the hydrophilic and hydrophobic regions of the membrane.