Search

An examination is done where the sensitivity of Raman correlation spectroscopy in solution is extended to the single-molecule level by applying surface- and resonance-enhanced Raman scattering (SERRS) combined with time-gated, confocal signal detection. Polarization-dependent SERRS autocorrelation curves and single-particle analysis leads to measurement of the individual rotational diffusion times and to directly examine the heterogeneity of the ensemble in solution.

A novel real-time burst integrated fluorescence lifetime (BIFL) technique was tested for its effectiveness to identify freely diffusing single molecules in an aqueous solution based on their characteristic steady-state anisotropy. The small fluorescent dye Rhodamine 123 and the enhanced yellow fluorescent protein (EYFP) were used since they have similar fluorescence anisotropy. Results showed that the BIFL is effective for the Rhodamine 123 and EYFP.

The photostability of fluorescent dyes is of crucial importance for the statistical accuracy of single-molecule detection (SMD) and for the image quality of scanning confocal microscopy. Concurrent results for the photostability were obtained by two different experimental techniques. First, the photostabilities of several coumarin and rhodamine derivatives in aqueous solution were obtained by monitoring the steady-state fluorescence decay in a quartz cell. Furthermore, an epi-illuminated microscope, continuous wave (CW) excitation at 514.5 nm, and fluorescence correlation spectroscopy (FCS) with a newly developed theory were used to study the photobleaching characteristics of rhodamines under conditions used for SMD. Depending on the rhodamine structure, the probability of photobleaching, [p.sub.b], is in the order of [10.sup.-6] - [10.sup.-7] for irradiances below [10.sup.3] W/[cm.sup.2]. However, a considerable increase of Ph for irradiances above this level was observed which can only be described by photobleaching reactions from higher excited states (two-step photolysis). In view of these observations, the probability of photobleaching, [p.sub.b], as well as a closed expression of its dependence on the CW excitation irradiance considering a five-level molecular electronic state model with the possibility of photobleaching from higher excited electronic states, is derived. From this model, optimal conditions for SMD with respect to the number of emitted fluorescence photons and to the signal-to-background ratio are discussed, taking into account both saturation and photobleaching. The additional photobleaching due to two-step photolysis limits the applicable irradiance.

Synthetic liposomes are widely used as drug delivery vehicles in biomedical treatments, such as for mRNA-based antiviral vaccines like those recently developed against SARS-CoV-2. Extracellular vesicles (EVs), which are naturally produced by cells, have emerged as a next-generation delivery system. However, key questions regarding their origin within cells remain unresolved. In this regard, plasma membrane vesicles (PMVs), which are essentially produced from the cellular plasma membrane (PM), present a promising alternative. Unfortunately, their properties relevant to biomedical applications have not be extensively studied. Therefore, we conducted a thorough investigation of the methods used in the production of PMVs. By leveraging advanced fluorescence techniques in microscopy and flow cytometry, we demonstrated a strong dependence of the physicochemical attributes of PMVs on the chemicals used during their production. Following established protocols employing chemicals such as paraformaldehyde (PFA), N- ethylmaleimide (NEM) or dl-dithiothreitol (DTT) and by developing a modified NEM-based method that involved a hypotonic shock step, we generated PMVs from THP-1 CD1d cells. We systematically compared key parameters such as vesicle output, their size distribution, vesicular content analysis, vesicular membrane lipid organization and the mobility of a transmembrane protein. Our results revealed distinct trends: PMVs isolated using NEM-based protocols closely resembled natural vesicles, whereas PFA induced significant molecular cross-linking, leading to notable changes in the biophysical properties of the vesicles. Furthermore, our novel NEM protocol enhanced the efficiency of PMV production. In conclusion, our study highlights the unique characteristics of chemically produced PMVs and offers insights into their potentially diverse yet valuable biological functions.

Fluorescence correlation spectroscopy (FCS) is a valuable tool to study the molecular dynamics in living cells. When used together with a super-resolution stimulated emission depletion (STED) microscope, STED-FCS can measure diffusion processes on the nanoscale in living cells. In two-dimensional (2D) systems like the cellular plasma membrane, a ring-shaped depletion focus is most commonly used to increase the lateral resolution, leading to more than 25-fold decrease in the observation volume, reaching the relevant scale of supramolecular arrangements. However, STED-FCS faces severe limitations when measuring diffusion in three dimensions (3D), largely due to the spurious background contributions from undepleted areas of the excitation focus that reduce the signal quality and ultimately limit the resolution. In this paper, we investigate how different STED confinement modes can mitigate this issue. By simulations as well as experiments with fluorescent probes in solution and in cells, we demonstrate that the coherent-hybrid (CH) depletion pattern created by a bivortex phase mask reduces background most efficiently and thus provides superior signal quality under comparable reduction of the observation volume. Featuring also the highest robustness to common optical aberrations, CH-STED can be considered the method of choice for reliable STED-FCS-based investigations of 3D diffusion on the subdiffraction scale., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

Cells rely on versatile diffusion dynamics in their plasma membrane. Quantification of this often heterogeneous diffusion is essential to the understanding of cell regulation and function. Yet such measurements remain a major challenge in cell biology, usually due to low sampling throughput, a necessity for dedicated equipment, sophisticated fluorescent label strategies, and limited sensitivity. Here, we introduce a robust, broadly applicable statistical analysis pipeline for large scanning fluorescence correlation spectroscopy data sets, which uncovers the nanoscale heterogeneity of the plasma membrane in living cells by differentiating free from hindered diffusion modes of fluorescent lipid and protein analogues.

Although the link between the inhalation of nanoparticles and cardiovascular disease is well established, the causal pathway between nanoparticle exposure and increased activity of blood coagulation factors remains unexplained. To initiate coagulation tissue factor bearing epithelial cell membranes should be exposed to blood, on the other side of the less than a micrometre thin air-blood barrier. For the inhaled nanoparticles to promote coagulation, they need to bind lung epithelial-cell membrane parts and relocate them into the blood. To assess this hypothesis, we use advanced microscopy and spectroscopy techniques to show that the nanoparticles wrap themselves with epithelial-cell membranes, leading to the membrane's disruption. The membrane-wrapped nanoparticles are then observed to freely diffuse across the damaged epithelial cell layer relocating epithelial cell membrane parts over the epithelial layer. Proteomic analysis of the protein content in the nanoparticles wraps/corona finally reveals the presence of the coagulation-initiating factors, supporting the proposed causal link between the inhalation of nanoparticles and cardiovascular disease.

The diffusion dynamics in the cellular plasma membrane provide crucial insights into molecular interactions, organization, and bioactivity. Beam-scanning fluorescence correlation spectroscopy combined with super-resolution stimulated emission depletion nanoscopy (scanning STED-FCS) measures such dynamics with high spatial and temporal resolution. It reveals nanoscale diffusion characteristics by measuring the molecular diffusion in conventional confocal mode and super-resolved STED mode sequentially for each pixel along the scanned line. However, to directly link the spatial and the temporal information, a method that simultaneously measures the diffusion in confocal and STED modes is needed. Here, to overcome this problem, we establish an advanced STED-FCS measurement method, line interleaved excitation scanning STED-FCS (LIESS-FCS), that discloses the molecular diffusion modes at different spatial positions with a single measurement. It relies on fast beam-scanning along a line with alternating laser illumination that yields, for each pixel, the apparent diffusion coefficients for two different observation spot sizes (conventional confocal and super-resolved STED). We demonstrate the potential of the LIESS-FCS approach with simulations and experiments on lipid diffusion in model and live cell plasma membranes. We also apply LIESS-FCS to investigate the spatiotemporal organization of glycosylphosphatidylinositol-anchored proteins in the plasma membrane of live cells, which, interestingly, show multiple diffusion modes at different spatial positions.

Giant unilamellar vesicles (GUVs) are well-established model systems for studying membrane structure and dynamics. Electroformation, also referred to as electroswelling, is one of the most prevalent methods for producing GUVs, as it enables modulation of the lipid hydration process to form relatively monodisperse, defect-free vesicles. Currently, however, it is expensive and time-consuming compared with other methods. In this study, we demonstrate that 1,2-dioleoyl- sn -glycero-3-phosphatidylcholine GUVs can be prepared readily at a fraction of the cost on stainless steel electrodes, such as commercially available syringe needles, without any evidence of lipid oxidation or hydrolysis.

Proteins embedded in the plasma membrane mediate interactions with the cell environment and play decisive roles in many signaling events. For cell-cell recognition molecules, it is highly likely that their structures and behavior have been optimized in ways that overcome the limitations of membrane tethering. In particular, the ligand binding regions of these proteins likely need to be maximally exposed. Here we show by means of atomistic simulations of membrane-bound CD2, a small cell adhesion receptor expressed by human T-cells and natural killer cells, that the presentation of its ectodomain is highly dependent on membrane lipids and receptor glycosylation acting in apparent unison. Detailed analysis shows that the underlying mechanism is based on electrostatic interactions complemented by steric interactions between glycans in the protein and the membrane surface. The findings are significant for understanding the factors that render membrane receptors accessible for binding and signaling.

The synthesis of a small-molecule dyad consisting of a far-red-emitting silicon rhodamine dye that is covalently linked to a photochromic spironaphthothiopyran unit, which serves as a photoswitchable quencher, is reported. This system can be switched reversibly between the fluorescent and nonfluorescent states using visible light at wavelengths of 405 and 630 nm, respectively, and it works effectively in aqueous solution. Live-cell imaging demonstrates that this dyad has several desirable features, including excellent membrane permeability, fast and reversible modulation of fluorescence by visible light, and good contrast between the bright and dark states.

Measuring small forces is a major challenge in cell biology. Here we improve the spatial resolution and accuracy of force reconstruction of the well-established technique of traction force microscopy (TFM) using STED microscopy. The increased spatial resolution of STED-TFM (STFM) allows a greater than 5-fold higher sampling of the forces generated by the cell than conventional TFM, accessing the nano instead of the micron scale. This improvement is highlighted by computer simulations and an activating RBL cell model system.

Heterogeneous diffusion dynamics of molecules play an important role in many cellular signaling events, such as of lipids in plasma membrane bioactivity. However, these dynamics can often only be visualized by single-molecule and super-resolution optical microscopy techniques. Using fluorescence lifetime correlation spectroscopy (FLCS, an extension of fluorescence correlation spectroscopy, FCS) on a super-resolution stimulated emission depletion (STED) microscope, we here extend previous observations of nanoscale lipid dynamics in the plasma membrane of living mammalian cells. STED-FLCS allows an improved determination of spatiotemporal heterogeneity in molecular diffusion and interaction dynamics via a novel gated detection scheme, as demonstrated by a comparison between STED-FLCS and previous conventional STED-FCS recordings on fluorescent phosphoglycerolipid and sphingolipid analogues in the plasma membrane of live mammalian cells. The STED-FLCS data indicate that biophysical and biochemical parameters such as the affinity for molecular complexes strongly change over space and time within a few seconds. Drug treatment for cholesterol depletion or actin cytoskeleton depolymerization not only results in the already previously observed decreased affinity for molecular interactions but also in a slight reduction of the spatiotemporal heterogeneity. STED-FLCS specifically demonstrates a significant improvement over previous gated STED-FCS experiments and with its improved spatial and temporal resolution is a novel tool for investigating how heterogeneities of the cellular plasma membrane may regulate biofunctionality.

The biological functions of the cell membrane are influenced by the mobility of its constituents, which are thought to be strongly affected by nanoscale structure and organization. Interactions with the actin cytoskeleton have been proposed as a potential mechanism with the control of mobility imparted through transmembrane "pickets" or GPI-anchored lipid nanodomains. This hypothesis is based on observations of molecular mobility using various methods, although many of these lack the spatiotemporal resolution required to fully capture all the details of the interaction dynamics. In addition, the validity of certain experimental approaches, particularly single-particle tracking, has been questioned due to a number of potential experimental artifacts. Here, we use interferometric scattering microscopy to track molecules labeled with 20-40 nm scattering gold beads with simultaneous <2 nm spatial and 20 μs temporal precision to investigate the existence and mechanistic origin of anomalous diffusion in bilayer membranes. We use supported lipid bilayers as a model system and demonstrate that the label does not influence time-dependent diffusion in the small particle limit (≤40 nm). By tracking the motion of the ganglioside lipid GM1 bound to the cholera toxin B subunit for different substrates and lipid tail properties, we show that molecular pinning and interleaflet coupling between lipid tail domains on a nanoscopic scale suffice to induce transient immobilization and thereby anomalous subdiffusion on the millisecond time scale.

We demonstrate far-field optical imaging at the nanoscale with unlabeled samples. Subdiffraction resolution images of autofluorescent samples are obtained by depleting the ground state of natural fluorophores by transferring them to a metastable dark state and simultaneously localizing those fluorophores that are transiently returning. Our approach is based on the insight that nanoscopy methods relying on stochastic single-molecule switching require only a single fluorescence on-off cycle to yield an image, a condition fulfilled by various biomolecules. The method is exemplified by recording label-free nanoscopy images of thylakoid membranes of spinach chloroplasts.

Current far-field optical nanoscopy schemes overcome the diffraction barrier by ensuring that adjacent features assume different states upon detection. Ideally, the transition between these states can be repeated endlessly and, if performed optically, with low levels of light. Here we report such optical switching, realized by pairing the luminescent triplet and a long-lived dark state of diamond color centers, enabling their imaging with a resolution >10 times beyond the diffraction barrier (<20 nm).

Charged nitrogen-vacancy (NV) color centers in diamond are excellent luminescence sources for far-field fluorescence nanoscopy by stimulated emission depletion (STED). Here we show that these photostable color centers can be visualized by STED using simple continuous-wave or high repetition pulsed lasers (76 MHz) at wavelengths >700 nm for STED. Furthermore, we show that NV centers can be imaged in three dimensions (3D) inside the diamond crystal and present single-photon signatures of single color centers recorded in high density samples, demonstrating a new recording scheme for STED and related far-field nanoscopy approaches. Finally, we exemplify the potential of using nanodiamonds containing NV centers as luminescence tags in STED microscopy. Our results offer new experimental avenues in nanooptics, nanotechnology, and the life sciences.

By combining the photoswitching and localization of individual fluorophores with spectroscopy on the single molecule level, we demonstrate simultaneous multicolor imaging with low crosstalk and down to 15 nm spatial resolution using only two detection color channels. The applicability of the method to biological specimens is demonstrated on mammalian cells. The combination of far-field fluorescence nanoscopy with the recording of a single switchable molecular species at a time opens up a new class of functional imaging techniques.

The comparison of Förster resonance energy transfer (FRET) efficiencies between two fluorophores covalently attached to a single protein or DNA molecule is an elegant approach for deducing information about their structural and dynamical heterogeneity. For a more detailed structural interpretation of single-molecule FRET assays, information about the positions as well as the dynamics of the dye labels attached to the biomolecule is important. In this work, Rhodamine 6G (2-[3'-(ethylamino)-6'-(ethylimino)-2',7'-dimethyl-6'H-xanthen-9'-yl]-benzoic acid) bound to the 5'-end of a 20 base pair long DNA duplex is investigated by both single-molecule multiparameter fluorescence detection (MFD) experiments and NMR spectroscopy. Rhodamine 6G is commonly employed in nucleic acid research as a FRET dye. MFD experiments directly reveal the equilibrium of the dye bound to DNA between three heterogeneous environments, which are characterized by distinct fluorescence lifetime and intensity distributions as a result of different guanine-dye excited-state electron transfer interactions. Sub-ensemble fluorescence autocorrelation analysis shows the highly dynamic character of the dye-DNA interactions ranging from nano- to milliseconds and species-specific triplet relaxation times. Two-dimensional NMR spectroscopy corroborates this information by the determination of the detailed geometric structures of the dye-nucleobase complex and their assignment to each population observed in the single-molecule fluorescence experiments. From both methods, a consistent and detailed molecular description of the structural and dynamical heterogeneity is obtained.

Given the particular importance of dye photostability for single-molecule and fluorescence fluctuation spectroscopy investigations, refined strategies were explored for how to chemically retard dye photobleaching. These strategies will be useful for fluorescence correlation spectroscopy (FCS), fluorescence-based confocal single-molecule detection (SMD) and related techniques. In particular, the effects on the addition of two main categories of antifading compounds, antioxidants (n-propyl gallate, nPG, ascorbic acid, AA) and triplet state quenchers (mercaptoethylamine, MEA, cyclo-octatetraene, COT), were investigated, and the relevant rate parameters involved were determined for the dye Rhodamine 6G. Addition of each of the compound categories resulted in significant improvements in the fluorescence brightness of the monitored fluorescent molecules in FCS measurements. For antioxidants, we identify the balance between reduction of photoionized fluorophores on the one hand and that of intact fluorophores on the other as an important guideline for what concentrations to be added for optimal fluorescence generation in FCS and SMD experiments. For nPG/AA, this optimal concentration was found to be in the lower micromolar range, which is considerably less than what has previously been suggested. Also, for MEA, which is a compound known as a triplet state quencher, it is eventually its antioxidative properties and the balance between reduction of fluorophore cation radicals and that of intact fluorophores that defines the optimal added concentration. Interestingly, in this optimal concentration range the triplet state quenching is still far from sufficient to fully minimize the triplet populations. We identify photoionization as the main mechanism of photobleaching within typical transit times of fluorescent molecules through the detection volume in a confocal FCS or SMD instrument (<1-20 ms), and demonstrate its generation via both one- and multistep excitation processes. Apart from reflecting a major pathway for photobleaching, our results also suggest the exploitation of the photoinduced ionization and the subsequent reduction by antioxidants for biomolecular monitoring purposes and as a possible switching mechanism with applications in high-resolution microscopy.

Dye photobleaching is a major constraint of fluorescence readout within a range of applications. In this study, we investigated the influence of photobleaching in fluorescence experiments applying multicolor laser as well as Förster resonance energy transfer (FRET) mediated excitation using several red-emitting dyes frequently used in multicolor experiments or as FRET acceptors. The chosen dyes (cyanine 5 (Cy5), MR121, Alexa660, Alexa680, Atto647N, Atto655) have chemically distinct chromophore systems and can be excited at 650 nm. Several fluorescence analysis techniques have been applied to detect photobleaching and to disclose the underlying photophysics, all of which are based on single-molecule detection: (1) fluorescence correlation spectroscopy (FCS) of bulk solutions, (2) fluorescence cross-correlation of single-molecule trajectories, and (3) multiparameter fluorescence detection (MFD) of single-molecule events. The maximum achievable fluorescence signals as well as the survival times of the red dyes were markedly reduced under additional laser irradiation in the range of 500 nm. Particularly at excitation levels at or close to saturation, the 500 nm irradiation effectively induced transitions to higher excited electronic states on already excited dye molecules, leading to a pronounced bleaching reactivity. A theoretical model for the observed laser irradiance dependence of the fluorescence brightness of a Cy5 FRET acceptor dye has been developed introducing the full description of the underlying photophysics. The model takes into account acceptor as well as donor photobleaching from higher excited electronic states, population of triplet states, and energy transfer to both the ground and excited states of the acceptor dye. Also, photoinduced reverse intersystem crossing via higher excited triplet states is included, which was found to be very efficient for Cy5 attached to DNA. Comparing continuous wave (cw) and pulsed donor excitation, a strong enhancement of acceptor photobleaching by a factor of 5 was observed for the latter. Thus, in the case of fluorescence experiments utilizing multicolor pulsed laser excitation, the application of the appropriate timing of synchronized green and red laser pulses in an alternating excitation mode can circumvent excessive photobleaching. Moreover, important new single-molecule analysis diagnosis tools are presented: (1) For the case of excessive acceptor photobleaching, cross-correlation analysis of single-molecule trajectories of the fluorescence signal detected in the donor and acceptor detection channels and vice versa shows an anticorrelated exponential decay and growth, respectively. (2) The time difference, Tg - Tr, of the mean observation times of all photons detected for the donor and acceptor detection channels within a single-molecule fluorescence burst allows one to identify and exclude molecules with an event of acceptor photobleaching. The presented single-molecule analysis methods can be constrained to, for example, FRET-active subpopulations, reducing bias from FRET-inactive molecules. The observations made are of strong relevance for and demand a careful choice of laser action in multicolor and FRET experiments, in particular when performed at or close to saturation.