Search

A new analytical approach to determine the speciation of hydrophobic organic analytes is presented. The freely dissolved concentration in a sample is controlled by passive dosing from silicone (poly(dimethylsiioxane)), and the total sample concentration at equilibrium is measured. The free fraction is determined as the ratio between measured concentrations in pure water and sample. [sup.14]Clabeled fluoranthene served as model analyte, and total sample concentrations were easily measured by liquid scintillation counting. The method was applied to surface water, stormwater runoff, and wastewater. In the untreated wastewater, 61% of the fluoranthene was bound to suspended solids, 28% was associated to dissolved organic matter, and 11% was freely dissolved, while in treated wastewater, the speciation was 16% bound to suspended solids, 4% bound to dissolved organic matter, and 80% freely dissolved. The free fraction in roof runoff (85%) and surface water (91%) was markedly higher than in runoff from paved areas, which ranged from 27 to 36%. A log [K.sub.DOC] value of 5.26 was determined for Aldrich humic acid, which agrees well with reported values obtained by fluorescence quenching and solid phase microextraction (SPME). This analytical approach combines simplicity with high precision, and it does not require any phase separation steps. 10.1021/ac902378w

The oral bioaccessibility of soil contaminants is increasingly assessed with physiologically based extraction tests (PBETs): the contaminant fraction that is desorbed into simulated digestive fluids is measured and classified as bioaccessible. However, this approach can lead to underestimations if the capacity of the fluids is insufficient to provide infinite sink conditions. Desorption will then progressively decrease and finally stop when equilibrium between soil and medium is reached. To circumvent this artifact, we incorporated a silicone rod as an absorption sink into the PBET to continuously absorb mobilized contaminants and maintain the desorption gradient. Polycyclic aromatic hydrocarbons served as model contaminants and the colon extended PBET as the extraction model. The inclusion of the silicone rod sink (1) increased the extraction capacity of the test by orders of magnitude, (2) ensured near infinite sink conditions, and (3) allowed for simple back-extraction of PAHs for their quantification by CC-MS. The silicone rod provided fast enrichment when applied to the stomach and small intestine compartment, but was somewhat slower in the richer colon compartment. Finally, the sorptive-PBET was applied to wood soot and a kindergarten soil. The present article provides the basis for how an absorption sink can be integrated into PBET models. [ABSTRACT FROM AUTHOR]

In principle, soil bioaccessibility extraction methods are simple dissolution experiments, where the fraction of compounds that is transferred to the extraction medium is measured and considered to be bioaccessible. For hydrophobic organic chemicals (HOCs) such techniques can lead to underestimation of bioaccessibility when the capacity of the extraction medium is insufficient to provide infinite sink conditions for the target compounds. A sorptive bioaccessibility extraction (SBE) method was thus developed and validated, which integrates the key processes of desorption from the matrix and subsequent consumption or depletion. Cyclodextrin was used as a diffusive carrier to enhance desorption from the matrix, while a silicone rod was used as a dominating sink that continuously absorbed the HOC molecules from the cyclodextrin solution. The silicone rod was then solvent extracted and the HOCs measured by GC-MS. For wood soot, the SBE method yielded PAH bioaccessibility estimates that were 3-24 times higher compared to a cyclodextrin extraction without a sink. The study demonstrated that the inclusion of an absorption sink into an established bioaccessibility extraction method (1) is rather simple, (2) can have a major impact on the obtained results, especially for the more hydrophobic compounds and (3) can simplify the analytics. [ABSTRACT FROM AUTHOR]

The binding and speciation of hydrophobic organic chemicals (HOCs) in aqueous solutions were determined by controlling chemical activity and measuring total concentrations. Passive dosing was applied to control chemical activities of HOCs in aqueous solutions by equilibrium partitioning from a poly(dimethylsiloxane) polymer preloaded with the chemicals. The HOC concentrations in the equilibrated solutions [Csolution(eq)] and water [Cwater(eq)] were then measured. Free fractions of the HOCs were determined as Cwater(eq)/Csolution(eq), whereas enhanced capacities (E) of the solutions for HOCs were determined as Csolution(eq)/Cwater(eq). A mixture of polycyclic aromatic hydrocarbons served as model analytes, while humic acid, sodium dodecyl sulfate, hydroxypropyl-β-cyclodextrin, and NaCl served as model medium constituents. The enhanced capacities were plotted versus the concentrations of medium constituents, and simple linear regression provided precise partition ratios, salting out constants, and critical micelle concentrations. These parameters were generally in good agreement with published values obtained by solid phase microextraction and fluorescence quenching. The very good precision was indicated by the low relative standard errors for the partition ratios of 0.5-8%, equivalent to 0.002-0.03 log unit. This passive dosing approach allows binding and speciation of HOCs to be studied without any phase separation steps or mass balance assumptions. [ABSTRACT FROM AUTHOR]