Search

Insulin-like peptide 5 (INSL5) targets the G protein-coupled receptor, relaxin family peptide receptor 4 (RXFP4), predominantly coexpressed in the colorectum. While INSL5 also binds to the related receptor RXFP3, it does not activate it. The INSL5/RXFP4 axis is a promising target for treating gastrointestinal disorders such as constipation. Despite its therapeutic potential, the clinical application of INSL5 has been hindered by synthesis complexities, necessitating the need for more accessible yet potent mimetics. In this study, we engineered an INSL5 analogue A13:B7-24-GG, featuring a simplified two-chain, two-disulfide scaffold with 32 amino acids, as opposed to the 45 amino acids found in native INSL5 (two-chain, three-disulfide), improving the synthesis yield by 19.5-fold. Additionally, A13:B7-24-GG demonstrates ∼4-fold higher potency (EC 50 = 1.17 nM vs 4.57 nM) and ∼11 times greater selectivity than native INSL5, with significantly reduced RXFP3 binding affinity, positioning it as a promising new therapeutic candidate for the treatment of constipation.

Despite their widespread impact on human health, there are no approved drugs for combating alphavirus infections. The heterocyclic β-aminomethyl vinyl sulfone RA-0002034 ( 1a ) is a potent irreversible covalent inhibitor of the alphavirus nsP2 cysteine protease with broad-spectrum antiviral activity. Analogs of 1a that varied each of the three regions of the molecule were synthesized to establish structure-activity relationships for the inhibition of Chikungunya (CHIKV) nsP2 protease and viral replication. The vinyl sulfone covalent warhead was highly sensitive to modifications. However, alterations to the core five-membered heterocycle and aryl substituent were well tolerated. The 5-(2,5-dimethoxyphenyl)pyrazole ( 1o ) and 4-cyanopyrazole ( 8d ) analogs exhibited k inact / K i ratios >9000 M -1 s -1 . 3-Arylisoxazole ( 10 ) was identified as an isosteric replacement for the five-membered heterocycle, which circumvented the intramolecular cyclization of pyrazole-based inhibitors like 1a . A ligand-based model of the enzyme active site was developed to aid the design of nsP2 protease inhibitors as potential therapeutics against alphaviruses.

This investigation was conducted to measure the radioactivity levels of 226 Ra, 228 Ra, 40 K, and 3 H in the 13 most popular branded bottled mineral water (BMW), 12 groundwater sources consumed in Dhaka city, Bangladesh, and six water samples collected from the nuclear object site at Savar, adjacent to Dhaka. The activity of 3 H was measured by using a liquid scintillation counter, and a gamma-ray spectrometer with an HPGe detector was used to measure the activity of other radionuclides. The average activity concentrations of 226 Ra, 228 Ra, 40 K, and 3 H in BMW samples and groundwater were found to be 1.81 ± 0.43, 1.74 ± 0.40, 43.08 ± 6.23, 2.42 ± 0.16, and 1.61 ± 0.51, 1.69 ± 0.45, 57.42 ± 3.16, and 3.02 ± 0.19 Bq/L, respectively. In addition, the activity concentrations of identified radionuclides in water samples collected from Savar were found to be 1.59 ± 0.43, 1.53 ± 0.50, 99.83 ± 3.05, and 2.95 ± 0.20 Bq/L. With the exception of 3 H, the activity concentration and the annual effective dose of 40 K, 226 Ra, and 228 Ra surpassed the acceptable thresholds of the WHO. The combined activity of radium (Ra c ) also exceeds the USEPA recommended maximum permissible limit of 0.185 Bq/L. The excess lifetime cancer risk results were below the permissible threshold of 10 -3 for radiological risks. Groundwater was subjected to an AAS analysis for common metals (Na, Mg, and Ca) and heavy metals (Fe, Cr, Cu, and Pb). The results showed that the heavy metals were below the detection limit. Radionuclide contents in groundwater of Dhaka city were mapped spatially using a GIS technique. Statistical analyses such as one-way ANOVA, one sample t test, and Pearson's correlation analysis were also performed. According to Pearson's correlation analysis, 228 Ra is mostly responsible for radiation risk in BMW and groundwater., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

HIV-1 integrase (IN), a major protein in the HIV life cycle responsible for integrating viral cDNA into the host DNA, represents a promising drug target. Small peptides have emerged as antiviral therapeutics for HIV because of their facile synthesis, highly selective nature, and fewer side effects. However, selecting the best candidates from a vast pool of peptides is a daunting task. In this study, multistep virtual screening was employed to identify potential peptides from a list of 280 HIV inhibitory peptides. Initially, 80 peptides were selected based on their minimum inhibitory concentrations (MIC). Then, molecular docking was performed to evaluate their binding scores compared to HIP000 and HIP00N which are experimentally validated HIV-1 integrase binding peptides that were used as a positive and negative control, respectively. The top-scoring docked complexes, namely, IN-HIP1113, IN-HIP1140, IN-HIP1142, IN-HIP678, IN-HIP776, and IN-HIP777, were subjected to initial 500 ns molecular dynamics (MD) simulations. Subsequently, HIP776, HIP777, and HIP1142 were selected for an in-depth mechanistic study of peptide interactions, with multiple simulations conducted for each complex spanning one microsecond. Independent simulations of the peptides, along with comparisons to the bound state, were performed to elucidate the conformational dynamics of the peptides. These peptides exhibit strong interactions with specific residues, as revealed by snapshot interaction analysis. Notably, LYS159, LYS156, VAL150, and GLU69 residues are prominently involved in these interactions. Additionally, residue-based binding free energy (BFE) calculations highlight the significance of HIS67, GLN148, GLN146, and SER147 residues within the binding pocket. Furthermore, the structure-activity relationship (SAR) analysis demonstrated that aromatic amino acids and the overall volume of peptides are the two major contributors to the docking scores. The best peptides will be validated experimentally by incorporating SAR properties, aiming to develop them as therapeutic agents and structural models for future peptide-based HIV-1 drug design, addressing the urgent need for effective HIV treatments., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

ConspectusMagnetism is an area of immense fundamental and technological importance. At the atomic level, magnetism originates from electron "spin". The field of nanospintronics (or nanoscale spin-based electronics) aims to control spins in nanoscale systems, which has resulted in astronomical improvement in data storage and magnetic field sensing technologies over the past few decades, recognized by the 2007 Nobel Prize in Physics. Spins in nanoscale solid-state devices can also act as quantum bits or qubits for emerging quantum technologies, such as quantum computing and quantum sensing.Due to the fundamental connection between magnetism and spins, ferromagnets play a key role in many solid-state spintronic devices. This is because at the Fermi level, electron density of states is spin-polarized, which permits ferromagnets to act as electrical injectors and detectors of spins. Ferromagnets, however, have limitations in terms of low spin polarization at the Fermi level, stray magnetic fields, crosstalk, and thermal instability at the nanoscale. Therefore, new physics and new materials are needed to propel spintronic and quantum device technologies to the true atomic limit. Emerging new phenomena such as chirality induced spin selectivity or CISS, in which an intriguing correlation between carrier spin and medium chirality is observed, could therefore be instrumental in nanospintronics. This effect could allow molecular-scale, chirality controlled spin injection and detection without the need for any ferromagnet, thus opening a fundamentally new direction for device spintronics.While CISS finds a myriad of applications in diverse areas such as chiral separation, recognition, detection, and asymmetric catalysis, in this focused Account, we exclusively review spintronic device results of this effect due to its immense potential for future spintronics. The first generation of CISS-based spintronic devices have primarily used chiral bioorganic molecules; however, many practical limitations of these materials have also been identified. Therefore, our discussion revolves around the family of chiral composite materials, which may emerge as an ideal platform for CISS due to their ability to assimilate various desirable material properties on a single platform. This class of materials has been extensively studied by the organic chemistry community in the past decades, and we discuss the various chirality transfer mechanisms that have been identified, which play a central role in CISS. Next, we discuss CISS device studies performed on some of these chiral composite materials. Emphasis is given to the family of chiral organic-carbon allotrope composites, which have been extensively studied by the authors of this Account over the past several years. Interestingly, due to the presence of multiple materials, CISS signals from hybrid chiral systems sometimes differ from those observed in purely chiral systems. Given the sheer diversity of chiral composite materials, CISS device studies so far have been limited to only a few varieties, and this Account is expected to draw increased attention to the family of chiral composites and motivate further studies of their CISS applications.

Two-dimensional electronic materials are a promising candidate for beyond-silicon electronics due to their favorable size scaling of electronic performance. However, a major challenge is the heterogeneous integration of 2D materials with CMOS processes while maintaining their excellent properties. In particular, there is a knowledge gap in how thin film deposition and processes interact with 2D materials to alter their strain and doping, both of which have a drastic impact on device properties. In this study, we demonstrate how to utilize process-induced strain, a common technique extensively applied in the semiconductor industry, to enhance the carrier mobility in 2D material transistors. We systematically varied the tensile strain in monolayer MoS 2 transistors by iteratively depositing thin layers of high-stress MgO x stressor. At each thickness, we combined Raman spectroscopy and transport measurements to unravel and correlate the changes in strain and doping within each transistor with their performance. The transistors displayed uniform strain distributions across their channels for tensile strains of up to 0.48 ± 0.05%, at 150 nm of stressor thickness. At higher thicknesses, mechanical instability occurred, leading to nonuniform strains. The transport characteristics systematically varied with strain, with enhancement in electron mobility at a rate of 130 ± 40% per % strain and enhancement of the channel saturation current density of 52 ± 20%. This work showcases how established CMOS technologies can be leveraged to tailor the transport in 2D transistors, accelerating the integration of 2D electronics into a future computing infrastructure.

Glucagon-like peptide receptor (GLP-1R) agonists (e.g., semaglutide, liraglutide, etc.) are efficient treatment options for people with type 2 diabetes and obesity. The manufacturing method to produce semaglutide, a blockbuster GLP-1 drug on the market, involves multistep synthesis. The large peptide has a hydrophobic fatty acid side chain that makes it sparingly soluble, and its handling, purification, and large-scale production difficult. The growing demand for semaglutide that the manufacturer is not capable of addressing immediately triggered a worldwide shortage. Thus, we have developed a potential alternative analogue to semaglutide by replacing the hydrophobic fatty acid with a hydrophilic human complex-type biantennary oligosaccharide. Our novel glycoGLP-1 analogue was isolated in an ∼10-fold higher yield compared with semaglutide. Importantly, our glycoGLP-1 analogue possessed a similar GLP-1R activation potency to semaglutide and was biologically active in vivo in reducing glucose levels to a similar degree as semaglutide.

Opioids represent the most extensive category of abused substances in the United States, and the number of fatalities caused by these drugs exceeds those associated with all other drug overdoses combined. The administration of naltrexone, a potent pan-opioid receptor antagonist, to an individual dependent on opioids can trigger opioid withdrawal and induce severe side effects. There is a pressing demand for opioid antagonists free of opioid withdrawal effects. In our laboratory, we have identified a compound with affinity to mu, delta, and kappa opioid receptors in the range of 150-250 nM. This blood-brain barrier (BBB)-permeant compound was metabolically stable in vitro and in vivo . Our in vivo work demonstrated that 1-10 mg/kg intraperitoneal administration of our compound produces moderate efficacy in antagonizing morphine-induced antiallodynia effects in the chemotherapy-induced peripheral neuropathy (CIPN) model. The treatment was well-tolerated and did not cause behavioral changes. We have observed a fast elimination rate of this metabolically stable molecule. Furthermore, no organ toxicity was observed during the chronic administration of the compound over a 14-day period. Overall, we report a novel functional opioid antagonist holds promise for developing an opioid withdrawal therapeutic., Competing Interests: The authors declare the following competing financial interest(s): Compounds described herein are the subject of published patent applications; U.S. Pat. Appl. Publ. (2020), US 2020/0131183 A1., (© 2024 American Chemical Society.)

Strain engineering in two-dimensional (2D) materials is a powerful but difficult to control approach to tailor material properties. Across applications, there is a need for device-compatible techniques to design strain within 2D materials. This work explores how process-induced strain engineering, commonly used by the semiconductor industry to enhance transistor performance, can be used to pattern complex strain profiles in monolayer MoS 2 and 2D heterostructures. A traction-separation model is identified to predict strain profiles and extract the interfacial traction coefficient of 1.3 ± 0.7 MPa/μm and the damage initiation threshold of 16 ± 5 nm. This work demonstrates the utility to (1) spatially pattern the optical band gap with a tuning rate of 91 ± 1 meV/% strain and (2) induce interlayer heterostrain in MoS 2 -WSe 2 heterobilayers. These results provide a CMOS-compatible approach to design complex strain patterns in 2D materials with important applications in 2D heterogeneous integration into CMOS technologies, moiré engineering, and confining quantum systems.

Gold nanoparticles are frequently employed as nanozyme materials due to their capacity to catalyze various enzymatic reactions. Given their plasmonic nature, gold nanoparticles have also found extensive utility in chemical and photochemical catalysis owing to their ability to generate excitons upon exposure to light. However, their potential for plasmon-assisted catalytic enhancement as nanozymes has remained largely unexplored due to the inherent challenge of rapid charge recombination. In this study, we have developed a strategy involving the encapsulation of gold nanorods (AuNRs) within a titanium dioxide (TiO 2 ) shell to facilitate the efficient separation of hot electron/hole pairs, thereby enhancing nanozyme reactivity. Our investigations have revealed a remarkable 10-fold enhancement in reactivity when subjected to 530 nm light excitation following the introduction of a TiO 2 shell. Leveraging single-molecule kinetic analyses, we discovered that the presence of the TiO 2 shell not only amplifies catalytic reactivity by prolonging charge relaxation times but also engenders additional reactive sites within the nanozyme's intricate structure. We anticipate that further enhancements in nanozyme performance can be achieved by optimizing interfacial interactions between plasmonic metals and semiconductors., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Co-published by Nanjing University and American Chemical Society.)

Chiral graphene hybrid materials have attracted significant attention in recent years due to their various applications in the areas of chiral catalysis, chiral separation and recognition, enantioselective sensing, etc. On the other hand, chiral materials are also known to exhibit chirality-dependent spin transmission, commonly dubbed "chirality induced spin selectivity" or CISS. However, CISS properties of chiral graphene materials are largely unexplored. As such, it is not clear whether graphene is even a promising material for the CISS effect given its weak spin-orbit interaction. Here, we report the CISS effect in chiral graphene sheets, in which a graphene derivative (reduced graphene oxide or rGO) is noncovalently functionalized with chiral Fmoc-FF (Fmoc-diphenylalanine) supramolecular fibers. The graphene flakes acquire a "conformational chirality" postfunctionalization, which, combined with other factors, is presumably responsible for the CISS signal. The CISS signal correlates with the supramolecular chirality of the medium, which depends on the thickness of graphene used. Quite interestingly, the noncovalent supramolecular chiral functionalization of conductive materials offers a simple and straightforward methodology to induce chirality and CISS properties in a multitude of easily accessible advanced conductive materials.

Peptides and peptidomimetics are attractive drug candidates because of their high target specificity and low-toxicity profiles. Developing peptidomimetics using hydrocarbon (HC)-stapling or other stapling strategies has gained momentum because of their high stability and resistance to proteases; however, they have limitations. Here, we take advantage of the α-methyl group and an aromatic phenyl ring in a unique unnatural amino acid, α-methyl-l-phenylalanine (αF), and propose a novel, noncovalent stapling strategy to stabilize peptides. We utilized this strategy to create an α-helical B-chain mimetic of a complex insulin-like peptide, human relaxin-3 (H3 relaxin). Our comprehensive data set ( in vitro , ex vivo , and in vivo ) confirmed that the new high-yielding B-chain mimetic, H3B10-27(13/17αF), is remarkably stable in serum and fully mimics the biological function of H3 relaxin. H3B10-27(13/17αF) is an excellent scaffold for further development as a drug lead and an important tool to decipher the physiological functions of the neuropeptide G protein-coupled receptor, RXFP3.

Matrix-assisted laser desorption ionization mass spectrometry imaging (MALDI-MSI) is a powerful analytical technique that provides spatially preserved detection and quantification of analytes in tissue specimens. However, clinical translation still requires improved throughput, precision, and accuracy. To accomplish this, we created "Chemical QuantArray", a gelatin tissue microarray (TMA) mold filled with serial dilutions of isotopically labeled endogenous metabolite standards. The mold is then cryo-sectioned onto a tissue homogenate to produce calibration curves. To improve precision and accuracy, we automatically remove pixels outside of each TMA well and investigated several intensity normalizations, including the utilization of a second stable isotope internal standard (IS). Chemical QuantArray enables the quantification of several endogenous metabolites over a wide dynamic range and significantly improve over current approaches. The technique reduces the space needed on the MALDI slides for calibration standards by approximately 80%. Furthermore, removal of empty pixels and normalization to an internal standard or matrix peak provided precision (<20% RSD) and accuracy (<20% DEV). Finally, we demonstrate the applicability of Chemical QuantArray by quantifying multiple purine metabolites in 14 clinical tumor specimens using a single MALDI slide. Chemical QuantArray improves the analytical characteristics and practical feasibility of MALDI-MSI metabolite quantification in clinical and translational applications.

Characterizing structures of protein complexes and their disease-related aberrations is essential to understanding molecular mechanisms of many biological processes. Electrospray ionization coupled with hybrid ion mobility/mass spectrometry (ESI-IM/MS) methods offer sufficient sensitivity, sample throughput, and dynamic range to enable systematic structural characterization of proteomes. However, because ESI-IM/MS characterizes ionized protein systems in the gas phase, it generally remains unclear to what extent the protein ions characterized by IM/MS have retained their solution structures. Here, we discuss the first application of our computational structure relaxation approximation [Bleiholder, C.; et al. J. Phys. Chem. B 2019, 123 (13), 2756-2769] to assign structures of protein complexes in the range from ∼16 to ∼60 kDa from their "native" IM/MS spectra. Our analysis shows that the computed IM/MS spectra agree with the experimental spectra within the errors of the methods. The structure relaxation approximation (SRA) indicates that native backbone contacts appear largely retained in the absence of solvent for the investigated protein complexes and charge states. Native contacts between polypeptide chains of the protein complex appear to be retained to a comparable extent as contacts within a folded polypeptide chain. Our computations also indicate that the hallmark "compaction" often observed for protein systems in native IM/MS measurements appears to be a poor indicator of the extent to which native residue-residue interactions are lost in the absence of solvent. Further, the SRA indicates that structural reorganization of the protein systems in IM/MS measurements appears driven largely by remodeling of the protein surface that increases its hydrophobic content by approximately 10%. For the systems studied here, this remodeling of the protein surface appears to occur mainly by structural reorganization of surface-associated hydrophilic amino acid residues not associated with β-strand secondary structure elements. Properties related to the internal protein structure, as assessed by void volume or packing density, appear unaffected by remodeling of the surface. Taken together, the structural reorganization of the protein surface appears to be generic in nature and to sufficiently stabilize protein structures to render them metastable on the time scale of IM/MS measurements.

Exenatide was the first marketed GLP-1 receptor agonist for the treatment of type 2 diabetes. Modification to the chemical structure or the formulation has the potential to increase the stability of exenatide. We introduced human complex-type sialyloligosaccharide to exenatide at the native Asn28 position. The synthesis was achieved using both solid phase peptide synthesis (SPPS) and Omniligase-1-mediated chemoenzymatic ligation. The results demonstrate that glycosylation increases the proteolytic stability of exenatide while retaining its full biological activity.

ConspectusOver the past five decades, significant progress has been made in the field of anion recognition with a diverse variety of synthetic receptors because of the fundamental importance of anions in chemical, environmental, and biological processes. In particular, urea- and thiourea-based molecules offering directional binding sites are attractive receptors for anions due to their ability to bind anions employing primarily hydrogen-bonding interactions under neutral conditions and have gained a recent paramount attention in the area of supramolecular chemistry. The presence of two imine (-NH) groups on each urea/thiourea functionality in these receptors gives them potential for excellent binding of an anion, mimicking the natural binding process in living cells. The increased acidity offered by thiocarbonyl groups (C═S) in a thiourea-functionalized receptor could enhance its anion binding ability as compared to its analogous urea-based receptor containing a carbonyl (C═O) group. During the last several years, our group has been involved in exploring a wide variety of synthetic receptors, and we have studied them with anions experimentally and computationally. In this Account, we will highlight the overall summary of our group's efforts focusing on anion coordination chemistry of urea- and thiourea-based receptors with varying linkers (rigid and flexible), dimensions (dipodal and tripodal), and functionalities (bifunctional, trifunctional, and hexafunctional). Depending on the linkers and attached groups, bifunctional-based dipodal receptors can bind anions forming 1:1 or 1:2 complexes. A dipodal receptor with flexible aliphatic or rigid m -xylyl linkers forms a cleft to bind a single anionic species in the pocket. However, a dipodal receptor with p -xylyl linkers binds anions in both 1:1 and 1:2 binding modes. As compared to a dipodal receptor, a tripodal receptor provides a more organized cavity for an anion, forming predominantly a 1:1 complex, while the binding strength and selectivity are influenced by linking chains and terminal groups. A hexafunctional-based tripodal receptor bridged with o -phenylene groups provides two clefts that can host two small anions or one large anion. However, a hexafunctional receptor with p -phenylene groups as linkers binds two anions, one at an inner pocket and the other at an outer pocket. It was shown that the presence of suitable chromophores at the terminal groups makes the receptor useful for the naked-eye detection for certain anions (e.g., fluoride, acetate) in solution. The field of anion binding chemistry is rapidly growing, and this Account aims to provide fundamental aspects influencing the binding strength and selectivity of anionic species with abiotic receptors which might eventually be useful for the development of new devices for binding, sensing, and separating biologically and environmentally important anions.

H2 relaxin is a peptide hormone that exerts its biological actions through the G protein-coupled receptor, RXFP1. The numerous important biological functions of H2 relaxin, including potent renal, vasodilatory, cardioprotective, and anti-fibrotic actions, have resulted in considerable interest in its use as a therapeutic for various cardiovascular diseases and other fibrotic indications. Interestingly though, H2 relaxin and RXFP1 have been shown to be overexpressed in prostate cancer, allowing for the downregulation or blocking of relaxin/RXFP1 to decrease prostate tumor growth. These findings suggest the application of an RXFP1 antagonist for the treatment of prostate cancer. However, these therapeutically relevant actions are still poorly understood and have been hindered by the lack of a high-affinity antagonist. In this study, we chemically synthesized three novel H2 relaxin analogues that have complex insulin-like structures with two chains (A and B) and three disulfide bridges. We report here the structure-activity relationship studies on H2 relaxin that resulted in the development of a novel high-affinity RXFP1 antagonist, H2 B-R13HR (∼40 nM), that has only one extra methylene group in the side chain of arginine 13 in the B-chain (Arg B13 ) of H2 relaxin. Most notably, the synthetic peptide was shown to be active in a mouse model of prostate tumor growth in vivo where it inhibited relaxin-mediated tumor growth. Our compound H2 B-R13HR will be an important research tool to understand relaxin actions through RXFP1 and may be a potential lead compound for the treatment of prostate cancer., Competing Interests: The authors declare no competing financial interest., (© 2023 American Chemical Society.)

The low bending stiffness of atomic membranes from van der Waals ferroelectrics such as α-In 2 Se 3 allow access to a regime of strong coupling between electrical polarization and mechanical deformation at extremely high strain gradients and nanoscale curvatures. Here, we investigate the atomic structure and polarization at bends in multilayer α-In 2 Se 3 at high curvatures down to 0.3 nm utilizing atomic-resolution scanning transmission electron microscopy, density functional theory, and piezoelectric force microscopy. We find that bent α-In 2 Se 3 produces two classes of structures: arcs, which form at bending angles below ∼33°, and kinks, which form above ∼33°. While arcs preserve the original polarization of the material, kinks contain ferroelectric domain walls that reverse the out-of-plane polarization. We show that these kinks stabilize ferroelectric domains that can be extremely small, down to 2 atoms or ∼4 Å wide at their narrowest point. Using DFT modeling and the theory of geometrically necessary disclinations, we derive conditions for the formation of kink-induced ferroelectric domain boundaries. Finally, we demonstrate direct control over the ferroelectric polarization using templated substrates to induce patterned micro- and nanoscale ferroelectric domains with alternating polarization. Our results describe the electromechanical coupling of α-In 2 Se 3 at the highest limits of curvature and demonstrate a strategy for nanoscale ferroelectric domain patterning.

Commercially available insulins are manufactured by recombinant methods for the treatment of diabetes. Long-acting insulin drugs (e.g., detemir and degludec) are obtained by fatty acid conjugation at LysB29 ε-amine of insulin via acid-amide coupling. There are three amine groups in insulin, and they all react with fatty acids in alkaline conditions. Due to the lack of selectivity, such conjugation reactions produce non-desired byproducts. We designed and chemically synthesized a novel thiol-insulin scaffold (CysB 29 -insulin II ), by replacing the Lys B29 residue in insulin with the Cys B29 residue. Then, we conjugated a fatty acid moiety (palmitic acid, C16) to CysB 29 -insulin II by a highly efficient and selective thiol-maleimide conjugation reaction. We obtained the target peptide (palmitoyl-insulin) rapidly within 5 min without significant byproducts. The palmitoyl-insulin is shown to be structurally similar to insulin and biologically active both in vitro and in vivo. Importantly, unlike native insulin, palmitoyl-insulin is slow and long-acting., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Artificial enzymes such as nanozymes and DNAzymes are economical and stable alternatives to natural enzymes. By coating Au nanoparticles (AuNPs) with a DNA corona (AuNP@DNA), we amalgamated nanozymes and DNAzymes into a new artificial enzyme with catalytic efficiency 5 times higher than AuNP nanozymes, 10 times higher than other nanozymes, and significantly greater than most of the DNAzymes on the same oxidation reaction. The AuNP@DNA demonstrates excellent specificity as its reactivity on a reduction reaction does not change with respect to pristine AuNP. Single-molecule fluorescence and force spectroscopies and density functional theory (DFT) simulations indicate a long-range oxidation reaction initiated by radical production on the AuNP surface, followed by radical transport to the DNA corona, where the binding and turnover of substrates take place. The AuNP@DNA is named coronazyme because of its natural enzyme mimicking capability through the well-orchestrated structures and synergetic functions. By incorporating different nanocores and corona materials beyond DNAs, we anticipate that the coronazymes represent generic enzyme mimics to carry out versatile reactions in harsh environments.

Naphthyridine-based inhibitors were synthesized to yield a potent and cell-active inhibitor of casein kinase 2 (CK2). Compound 2 selectively inhibits CK2α and CK2α' when profiled broadly, thereby making it an exquisitely selective chemical probe for CK2. A negative control that is structurally related but lacks a key hinge-binding nitrogen ( 7 ) was designed on the basis of structural studies. Compound 7 does not bind CK2α or CK2α' in cells and demonstrates excellent kinome-wide selectivity. Differential anticancer activity was observed when compound 2 was profiled alongside a structurally distinct CK2 chemical probe: SGC-CK2-1. This naphthyridine-based chemical probe ( 2 ) represents one of the best available small molecule tools with which to interrogate biology mediated by CK2., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

From a designed library of indolyl pyrimidinamines, we identified a highly potent and cell-active chemical probe ( 17 ) that inhibits phosphatidylinositol-3-phosphate 5-kinase (PIKfyve). Comprehensive evaluation of inhibitor selectivity confirmed that this PIKfyve probe demonstrates excellent kinome-wide selectivity. A structurally related indolyl pyrimidinamine ( 30 ) was characterized as a negative control that lacks PIKfyve inhibitory activity and exhibits exquisite selectivity when profiled broadly. Chemical probe 17 disrupts multiple phases of the lifecycle of β-coronaviruses: viral replication and viral entry. The diverse antiviral roles of PIKfyve have not been previously probed comprehensively in a single study or using the same compound set. Our scaffold is a distinct chemotype that lacks the canonical morpholine hinge-binder of classical lipid kinase inhibitors and has a non-overlapping kinase off-target profile with known PIKfyve inhibitors. Our chemical probe set can be used by the community to further characterize the role of PIKfyve in virology.

A number of reports of the effects of garlic on gut microbiota revealed that the active garlic organosulfur compounds (OSCs) are destabilized by the action of alliinase during garlic preparation. In this study, garlic alliinase was deactivated to obtain stable garlic OSCs. Experiments with C57BL/6J mice fed with lipid and glucose metabolic disorder-inducing Western diet (WD) revealed that stable garlic OSCs prevented the disorder by increasing the relative abundance of gut Bacteroides acidifaciens . Molecular analysis indicated that garlic OSCs inhibited dyslipidemia and fatty liver by increasing taurine and subsequently promoting hepatic fatty acid β-oxidation. In parallel, garlic OSCs could meliorate glucose homeostasis by inhibiting dipeptidyl peptidase-4 (DPP-4) and hepatic gluconeogenesis. In vitro bacterial culture experiments revealed that garlic OSCs directly increased the growth of gut Bacteroides acidifaciens . The results of this study demonstrate that the molecular mechanism of the preventive effect of garlic OSCs on the WD-induced metabolic disorder is attributed to the enhanced growth of Bacteroides acidifaciens and the consequent increase in taurine.

The growing epidemic of diabetes means that there is a need for therapies that are more efficacious, safe, and convenient. Here, we report the efficient synthesis of a novel disulfide dimer of human insulin tethered at the N-terminus of its B-chain through placement of a cysteine residue. The resulting peptide was shown to bind to both the insulin receptor isoform B and insulin-like growth factor-1 receptor with comparable affinity to native insulin. In in vivo insulin tolerance tests, the dimer was equipotent to Actrapid insulin and possessed a sustained duration of action greater than that of Actrapid and Glargine. While the secondary structure of our dimeric insulin was similar to that of insulin, it was more resistant to proteolysis. More importantly, our analogue was produced in quantitative yield from a monomeric thiol insulin scaffold. Our results suggest that this dimer has significant potential to address the clinical needs in the treatment of diabetes.

The current commercially available glucagon formulations for the treatment of severe hypoglycemia must be reconstituted immediately prior to use, owing to the susceptibility of glucagon to fibrillation and aggregation in an aqueous solution. This results in the inconvenience of handling, misuse, and wastage of this drug. To address these issues, we synthesized a glycosylated glucagon analogue in which the 25th residue (Trp) was replaced with a cysteine (Cys) and a Br-disialyloligosaccharide was conjugated at the Cys thiol moiety. The resulting analogue, glycoglucagon, is a highly potent full agonist at the glucagon receptor. Importantly, glycoglucagon exhibits markedly reduced propensity for fibrillation and enhanced thermal and metabolic stability. This novel analogue is thus a valuable lead for producing stable liquid glucagon formulations that will improve patient compliance and minimize wastage.

Insulin-like peptide 5 (INSL5), the natural ligand for the relaxin family peptide receptor 4 (RXFP4), is a gut hormone that is exclusively produced by colonic L-cells. We have recently developed an analogue of INSL5, INSL5-A13, that acts as an RXFP4 agonist in vitro and stimulates colorectal propulsion in wild-type mice but not in RXFP4-knockout mice. These results suggest that INSL5 may have a physiological role in the control of colorectal motility. To investigate this possibility, in this study we designed and developed a novel INSL5 analogue, INSL5-A13NR. This compound is a potent antagonist, without significant agonist activity, in two in vitro assays. We report here for the first time that this novel antagonist peptide blocks agonist-induced increase in colon motility in mice that express RXFP4. Our data also show that colorectal propulsion induced by intracolonic administration of bacterial products (short-chain fatty acids, SCFAs) is antagonized by INSL5-A13NR. Therefore, INSL5-A13NR is an important research tool and potential drug lead for the treatment of colon motility disorders, such as bacterial diarrheas., Competing Interests: The authors declare no competing financial interest., (© 2021 American Chemical Society.)

CAMKK2 is a serine/threonine kinase and an activator of AMPK whose dysregulation is linked with multiple diseases. Unfortunately, STO-609, the tool inhibitor commonly used to probe CAMKK2 signaling, has limitations. To identify promising scaffolds as starting points for the development of high-quality CAMKK2 chemical probes, we utilized a hinge-binding scaffold hopping strategy to design new CAMKK2 inhibitors. Starting from the potent but promiscuous disubstituted 7-azaindole GSK650934, a total of 32 compounds, composed of single-ring, 5,6-, and 6,6-fused heteroaromatic cores, were synthesized. The compound set was specifically designed to probe interactions with the kinase hinge-binding residues. Compared to GSK650394 and STO-609, 13 compounds displayed similar or better CAMKK2 inhibitory potency in vitro , while compounds 13g and 45 had improved selectivity for CAMKK2 across the kinome. Our systematic survey of hinge-binding chemotypes identified several potent and selective inhibitors of CAMKK2 to serve as starting points for medicinal chemistry programs.

Thin SiO x interlayers are often formed naturally during the deposition of transition metal oxides on silicon surfaces due to interfacial reaction. The SiO x layer, often only several atomic layers thick, becomes the interface between the Si and deposited metal oxide and can therefore influence the electrical properties and thermal stability of the deposited stack. This work explores the potential benefits of controlling the properties of the SiO x interlayer by the introduction of pregrown high-quality SiO x which also inhibits the formation of low-quality SiO x from the metal-oxide deposition process. This work demonstrates that a high-quality pregrown SiO x can reduce the interfacial reaction and results in a more stoichiometric MoO x with improved surface passivation and thermal stability linked to its lower D it . Detailed experimental data on carrier selectivity, carrier transport efficiency, annealing stability up to 250 °C, and in-depth material analysis are presented.

The pancreatic peptide hormone insulin, first discovered exactly 100 years ago, is essential for glycemic control and is used as a therapeutic for the treatment of type 1 and, increasingly, type 2 diabetes. With a worsening global diabetes epidemic and its significant health budget imposition, there is a great demand for new analogues possessing improved physical and functional properties. However, the chemical synthesis of insulin's intricate 51-amino acid, two-chain, three-disulfide bond structure, together with the poor physicochemical properties of both the individual chains and the hormone itself, has long represented a major challenge to organic chemists. This review provides a timely overview of the past efforts to chemically assemble this fascinating hormone using an array of strategies to enable both correct folding of the two chains and selective formation of disulfide bonds. These methods not only have contributed to general peptide synthesis chemistry and enabled access to the greatly growing numbers of insulin-like and cystine-rich peptides but also, today, enable the production of insulin at the synthetic efficiency levels of recombinant DNA expression methods. They have led to the production of a myriad of novel analogues with optimized structural and functional features and of the feasibility for their industrial manufacture.

We recently reported that cyclic thiosulfinates are cysteine selective cross-linkers that avoid the "dead-end" modifications that contribute to other cross-linkers' toxicity. In this study, we generalize the chemistry of cyclic thiosulfinates to that of thiol selective cross-linking and apply them to the synthesis of hydrogels. Thiol-functionalized four-arm poly(ethylene glycol) and hyaluronic acid monomers were cross-linked with 1,2-dithiane-1-oxide to form disulfide cross-linked hydrogels within seconds. The synthesized hydrogel could be reduced with physiological concentrations of glutathione, which modulated hydrogel mechanical properties and degradation kinetics. Bovine serum albumin protein was successfully encapsulated in hydrogel, and diffusion-mediated release was demonstrated in vitro. Hep G2 cells grew in the presence of preformed hydrogel and during hydrogel synthesis, demonstrating acceptable cytotoxicity. We encapsulated cells within a hydrogel and demonstrated cell growth and recovery up to 10 days, with and without cell adhesion peptides. In summary, we report cyclic thiosulfinates as a novel class of cross-linkers for the facile synthesis of biodegradable hydrogels.

Here, we report the effect of the substrate, sonication process, and postannealing on the structural, morphological, and optical properties of ZnO thin films grown in the presence of isopropyl alcohol (IPA) at temperature 30-65 °C by the successive ionic layer adsorption and reaction (SILAR) method on both soda lime glass (SLG) and Cu foil. The X-ray diffraction (XRD) patterns confirmed the preferential growth thin films along (002) and (101) planes of the wurtzite ZnO structure when deposited on SLG and Cu foil substrates, respectively. Both XRD and Raman spectra confirmed the ZnO and Cu-oxide phases of the deposited films. The scanning electron microscopy image of the deposited films shows compact and uniformly distributed grains for samples grown without sonication while using IPA at temperatures 50 and 65 °C. The postannealing treatment improves the crystallinity of the films, further evident by XRD and transmission and reflection results. The estimated optical band gaps are in the range of 3.37-3.48 eV for the as-grown samples. Our experimental results revealed that high-quality ZnO thin films could be grown without sonication using an IPA dispersant at 50 °C, which is much lower than the reported results using the SILAR method. This study suggests that in the presence of IPA, the SLG substrate results in better c -axis-oriented ZnO thin films than that of deionized water, ethylene glycol, and propylene glycol at the optimum temperature of 50 °C. Air annealing of the samples grown on Cu foils induced the formation of Cu x O/ZnO junctions, which is evident from the characteristic I - V curve including the structural and optical data., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

A strategy has been established for the synthesis of a family of bifunctional HIV-1 inhibitor covalent conjugates with the potential to bind simultaneously to both the gp120 and gp41 subunits of the HIV-1 envelope glycoprotein trimeric complex (Env). One component of the conjugates is derived from BNM-III-170, a small-molecule CD4 mimic that binds to gp120. The second component, comprised of the peptide DKWASLWNW ("Trp3"), was derived from the N-terminus of the HIV-1 gp41 Membrane Proximal External Region (MPER) and found previously to bind to the gp41 subunit of Env. The resulting bifunctional conjugates were shown to inhibit virus cell infection with low micromolar potency and to induce lysis of the HIV-1 virion. Crucially, virolysis was found to be dependent on the covalent linkage of the BNM-III-170 and Trp3 domains, as coadministration of a mixture of the un-cross-linked components proved to be nonlytic. However, a significant magnitude of lytic activity was observed in Env-negative and other control pseudoviruses, suggesting parallel mechanisms of action of the conjugates involving Env interaction and direct membrane disruption. Computational modeling suggested strong membrane-binding activity of BNM-III-170, which may underly the nonspecific virolytic effects of the conjugates. To investigate the scope of the membrane effect, cell-based cytotoxicity and membrane permeability assays were performed employing flow cytometry. Here, we observed a dose-dependent and specific cytotoxic effect on HIV-1 Env-expressing cells by the small-molecule bifunctional inhibitor. Most importantly, Env-negative cells were not susceptible to the cytotoxic effect upon exposure to this construct at concentrations where cell-killing effects were observed for Env-positive cells. Computational structural modeling supports a mechanism in which the bifunctional inhibitors bind to the gp120 and gp41 subunits in tandem in open-state Env trimers and induce relative motion of the gp120 subunits consistent with models of Env inactivation. This observation supports the idea that the cell-killing effect of the small-molecule bifunctional inhibitor is due to specific Env conformational triggering. This work lays important groundwork to advance a small-molecule bifunctional inhibitor approach for eliminating Env-expressing infected cells and the eradication of HIV-1.

Over 50 peptides, which were known to inhibit SARS-CoV-1, were computationally screened against the receptor-binding domain (RBD) of the spike protein of SARS-CoV-2. Based on the binding affinity and interaction, 15 peptides were selected, which showed higher affinity compared to the α-helix of the human ACE2 receptor. Molecular dynamics simulation demonstrated that two peptides, S2P25 and S2P26, were the most promising candidates, which could potentially block the entry of SARS-CoV-2. Tyr489 and Tyr505 residues present in the "finger-like" projections of the RBD were found to be critical for peptide interaction. Hydrogen bonding and hydrophobic interactions played important roles in prompting peptide-protein binding and interaction. Structure-activity relationship indicated that peptides containing aromatic (Tyr and Phe), nonpolar (Pro, Gly, Leu, and Ala), and polar (Asn, Gln, and Cys) residues were the most significant contributors. These findings can facilitate the rational design of selective peptide inhibitors targeting the spike protein of SARS-CoV-2.

Due to their high in-plane stiffness and low flexural rigidity, two-dimensional (2D) materials are excellent candidates for engineering three-dimensional (3D) nanostructures using crumpling. An important new direction is to integrate 2D materials into crumpled heterostructures, which can have much more complex device geometries. Here, we demonstrate phototransistors from crumpled 2D heterostructures formed from graphene contacts to a monolayer transition-metal dichalcogenide (MoS 2 , WSe 2 ) channel and quantify the membrane morphology and optoelectronic performance. First, we examined the morphology of folds in the heterostructure and constituent monolayers under uniaxial compression. The 2D membranes relieve the stress by delaminating from the substrate and creating nearly periodic folds whose spacing depends on the membrane type. The matched mechanical stiffness of the constituting layers allows the 2D heterostructure to maintain a conformal interface through large deformations. Next, we examined the optoelectronic performance of a biaxially crumpled graphene-WSe 2 phototransistor. Photoluminescence (PL) spectroscopy shows that the optical band gap of WSe 2 shifts by less than 2 meV between flat and 15% biaxial crumpling, corresponding to a change in strain of less than 0.05%. The photoresponsivity scaled as P -0.38 and reached 20 A/W under an illumination power density of 4 μW/cm 2 at 20 V bias, a performance comparable to flat photosensors. Using photocurrent microscopy, we observe that the photoresponsivity increases by only 20% after crumpling. Both the PL and photoresponse confirm that crumpling and delamination prevent the buildup of compressive strain leading to highly deformed materials and devices with similar performance to their flat analogs. These results set a foundation for crumpled all-2D heterostructure devices and circuitry for flexible and stretchable electronic applications.

The receptor for the neuropeptide relaxin 3, relaxin family peptide 3 (RXFP3) receptor, is an attractive pharmacological target for the control of eating, addictive, and psychiatric behaviors. Several structure-activity relationship studies on both human relaxin 3 (containing 3 disulfide bonds) and its analogue A2 (two disulfide bonds) suggest that the C-terminal carboxylic acid of the tryptophan residue in the B-chain is important for RXFP3 activity. In this study, we have added amide, alcohol, carbamate, and ester functionalities to the C-terminus of A2 and compared their structures and functions. As expected, the C-terminal amide form of A2 showed lower binding affinity for RXFP3 while ester and alcohol substitutions also demonstrated lower affinity. However, while these analogues showed slightly lower binding affinity, there was no significant difference in activation of RXFP3 compared to A2 bearing a C-terminal carboxylic acid, suggesting the binding pocket is able to accommodate additional atoms., Competing Interests: The authors declare no competing financial interest., (© 2020 American Chemical Society.)

The receptor for insulin-like peptide 5 (INSL5), RXFP4, is a potential pharma target for treating human conditions such as constipation, anorexia, and obesity. However, since INSL5 has a complex structure of two chains and three disulfide bonds, its synthesis has proven to be extremely difficult via either chemical or recombinant approaches. Previous studies led to the engineering of a high yielding simplified INSL5 analog, named analog 13 (A13), which retains native INSL5-like activity. The focus of this study is to further simplify the structure of A13 by truncating the N-terminal residues of the B-chain. We have found that the first six residues at the N-terminus of A13 are not important for RXFP4 binding and cAMP potency. The most minimized active structure of INSL5 identified in this study is A13: B7-24 which will be an important research tool to study the physiological role of RXFP4 and a template for further modification to improve its pharmacokinetic properties., Competing Interests: The authors declare no competing financial interest., (© 2020 American Chemical Society.)

Dual-acting virucidal entry inhibitors (DAVEIs) have previously been shown to cause irreversible inactivation of HIV-1 Env-presenting pseudovirus by lytic membrane transformation. This study examined whether this transformation could be generalized to include membranes of Env-presenting cells. Flow cytometry was used to analyze HEK293T cells transiently transfected with increasing amounts of DNA encoding JRFL Env, loaded with calcein dye, and treated with serial dilutions of microvirin (Q831K/M83R)-DAVEI. Comparing calcein retention against intact Env expression (via Ab 35O22) on individual cells revealed effects proportional to Env expression. "Low-Env" cells experienced transient poration and calcein leakage, while "high-Env" cells were killed. The cell-killing effect was confirmed with an independent mitochondrial activity-based cell viability assay, showing dose-dependent cytotoxicity in response to DAVEI treatment. Transfection with increasing quantities of Env DNA showed further shifts toward "High-Env" expression and cytotoxicity, further reinforcing the Env dependence of the observed effect. Controls with unlinked DAVEI components showed no effect on calcein leakage or cell viability, confirming a requirement for covalently linked DAVEI compounds to achieve Env transformation. These data demonstrate that the metastability of Env is an intrinsic property of the transmembrane protein complex and can be perturbed to cause membrane disruption in both virus and cell contexts.

Glycosylation is an accepted strategy to improve the therapeutic value of peptide and protein drugs. Insulin and its analogues are life-saving drugs for all type I and 30% of type II diabetic patients. However, they can readily form fibrils which is a significant problem especially for their use in insulin pumps. Because of the solubilizing and hydration effects of sugars, it was thought that glycosylation of insulin could inhibit fibril formation and lead to a more stable formulation. Since enzymatic glycosylation results in heterogeneous products, we developed a novel chemical strategy to produce a homogeneous glycoinsulin (disialo-glycoinsulin) in excellent yield (∼60%). It showed a near-native binding affinity for insulin receptors A and B in vitro and high glucose-lowering effects in vivo , irrespective of the route of administration ( s.c. vs i.p. ). The glycoinsulin retained insulin-like helical structure and exhibited improved stability in human serum. Importantly, our disialo-glycoinsulin analogue does not form fibrils at both high concentration and temperature. Therefore, it is an excellent candidate for clinical use in insulin pumps.

The development of antifibrotic materials and coatings that can resist the foreign body response (FBR) continues to present a major hurdle in the advancement of current and next-generation implantable medical devices, biosensors, and cell therapies. From an implant perspective, the most important issue associated with the FBR is the prolonged inflammatory response leading to a collagenous capsule that ultimately blocks mass transport and communication between the implant and the surrounding tissue. Up to now, most attempts to reduce the capsule thickness have focused on providing surface coatings that reduce protein fouling and cell attachment. Here, we present an approach that is based on the sustained release of a peptide drug interfering with the FBR. In this study, the biodegradable polymer poly(lactic- co -glycolic) acid (PLGA) was used as a coating releasing the relaxin peptide analogue B7-33, which has been demonstrated to reduce organ fibrosis in animal models. While in vitro protein quantification was used to demonstrate controlled release of the antifibrotic peptide B7-33 from PLGA coatings, an in vitro reporter cell assay was used to demonstrate that B7-33 retains activity against the relaxin family peptide receptor 1 (RXFP1). Subcutaneous implantation of PLGA-coated polypropylene samples in mice with and without the peptide demonstrated a marked reduction in capsule thickness (49.2%) over a 6 week period. It is expected that this novel approach will open the door to a range of new and improved implantable medical devices.

Surfaces are abundant in living systems, such as in the form of cellular membranes, and govern many biological processes. In this study, the adsorption of the amyloidogenic model peptides GNNQQNY, NNFGAIL, and VQIVYK as well as the amyloid-forming antimicrobial peptide uperin 3.5 (U3.5) were studied at low concentrations (100 μM) to different surfaces. The technique of a quartz crystal microbalance with dissipation monitoring (QCM-D) was applied as it enables the monitoring of mass binding to sensors at nanogram sensitivity. Gold-coated quartz sensors were used as unmodified gold surfaces or functionalized with self-assembled monolayers (SAMs) of alkanethiols (terminated as methyl, amino, carboxyl, and hydroxyl) resulting in different adsorption affinities of the peptides. Our objective was to evaluate the underlying role of the nature and feature of interfaces in biological systems which could concentrate peptides and impact or trigger peptide aggregation processes. In overall, the largely hydrophobic peptides adsorbed with preference to hydrophobic or countercharged surfaces. Further, the glycoprotein lubricin (LUB) was tested as an antiadhesive coating. Despite its hydrophilicity, the adsorption of peptides to LUB coated sensors was similar to the adsorption to unmodified gold surfaces, which indicates that some peptides diffused through the LUB layer to reach the underlying gold sensor surface. The LUB protein-antiadhesive is thus more effective as a biomaterial coating against larger biomolecules than small peptides under the conditions used here. This study provides directions toward a better understanding of amyloid peptide adsorption to biologically relevant interfaces, such as cellular membranes.

Many peptides aggregate into insoluble β-sheet rich amyloid fibrils. Some of these aggregation processes are linked to age-related diseases, such as Alzheimer's disease and type 2 diabetes. Here, we show that the secondary structure of the peptide uperin 3.5 directs the kinetics and mechanism of amyloid fibrillar aggregation. Uperin 3.5 variants were investigated using thioflavin T fluorescence assays, circular dichroism spectroscopy, and structure prediction methods. Our results suggest that those peptide variants with a strong propensity to form an α-helical secondary structure under physiological conditions are more likely to aggregate into amyloid fibrils than peptides in an unstructured or "random coil" conformation. This conclusion is in good agreement with the hypothesis that an α-helical transition state is required for peptide aggregation into amyloid fibrils. Specifically, uperin 3.5 variants in which charged amino acids were replaced by alanine were richer in α-helical content, leading to enhanced aggregation compared to that of wild type uperin 3.5. However, the addition of 2,2,2-trifluoroethanol as a major co-solute or membrane-mimicking phospholipid environments locked uperin 3.5 to the α-helical conformation preventing amyloid aggregation. Strategies for stabilizing peptides into their α-helical conformation could provide therapeutic approaches for overcoming peptide aggregation-related diseases. The impact of the physiological environment on peptide secondary structure could explain aggregation processes in a cellular environment.

In order to achieve a high performance-to-cost ratio to photovoltaic devices, the development of crystalline silicon (c-Si) solar cells with thinner substrates and simpler fabrication routes is an important step. Thin-film heterojunction solar cells (HSCs) with dopant-free and carrier-selective configurations look like ideal candidates in this respect. Here, we investigated the application of n-type silicon/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) HSCs on periodic nanopyramid textured, ultrathin c-Si (∼25 μm) substrates. A fluorine-doped titanium oxide film was used as an electron-selective passivating layer showing excellent interfacial passivation (surface recombination velocity ∼10 cm/s) and contact property (contact resistivity ∼20 mΩ/cm 2 ). A high efficiency of 15.10% was finally realized by optimizing the interfacial recombination and series resistance at both the front and rear sides, showing a promising strategy to fabricate high-performance ultrathin c-Si HSCs with a simple and low-temperature procedure.

Measuring the acidity of atmospheric aerosols is critical, as many key multiphase chemical reactions involving aerosols are highly pH-dependent. These reactions impact processes, such as secondary organic aerosol (SOA) formation, that impact climate and health. However, determining the pH of atmospheric particles, which have minute volumes (10 -23 -10 -18 L), is an analytical challenge due to the nonconservative nature of the hydronium ion, particularly as most chemical aerosol measurements are made offline or under vacuum, where water can be lost and acid-base equilibria shifted. Because of these challenges, there have been no direct methods to probe atmospheric aerosol acidity, and pH has typically been determined by proxy/indirect methods, such as ion balance, or thermodynamic models. Herein, we present a novel and facile method for direct measurement of size-resolved aerosol acidity from pH 0 to 4.5 using quantitative colorimetric image processing of cellular phone images of (NH 4 ) 2 SO 4 -H 2 SO 4 aqueous aerosol particles impacted onto pH-indicator paper. A trend of increasing aerosol acidity with decreasing particle size was observed that is consistent with spectroscopic measurements of individual particle pH. These results indicate the potential for direct measurements of size-resolved atmospheric aerosol acidity, which is needed to improve fundamental understanding of pH-dependent atmospheric processes, such as SOA formation.

The transition-metal disulfide (MoS 2 ) is a fantastic material used in diverse fields of applications. Ionic diffusivity and interfacial exchange current density are model parameters that play a crucial role for the optimization of device performances, which are not clearly known for this material. The additive-free dense film of MoS 2 has been deposited by a facile electrodeposition approach and characterized by structural, morphological, and compositional analyses. This report provides the characterization of interfacial charge-transfer kinetics and diffusion of lithium ion in the MoS 2 films as a function of lithium concentration at 25 °C temperature. The interfacial exchange current density is observed to be varied barely, ∼0.069-0.066 mA/cm 2 , with the change of lithium content, from x = 0.01-0.25, in Li x MoS 2 . The ionic diffusivity of the film is found to be in the range of ∼3 × 10 -11 -10 -11 cm 2 s -1 and does not vary much with the measured lithium concentration window. The electrochemical performances of the material are limited by the transport of lithium ion and interfacial kinetics over the measured state of lithium content. A submicron-size particle with high surface area is needed to be used as an electrode of the material for practical C-rates.

This study reports on the unique water vapor adsorption properties of biomass-derived starch particles (SPs). SPs offer an alternative desiccant for air-to-air energy exchangers in heating, ventilation, and air conditioning systems because of their remarkable adsorption-desorption performance. SP 15 has a particle diameter ( d p ) of 15 μm with a surface area (SA) of 2.89 m 2 /g and a pore width ( P w ) of 80 Å. Microporous starch particles (SP 15 ) were compared with high amylose starch (HAS 15 ; SA = 0.56 m 2 /g, d p = 15 μm, P w = 46 Å) and silica gel (SG 13 ; SA = 478 m 2 /g, d p = 13 μm, P w = 62 Å). Transient water vapor tests were performed using a customized small-scale energy exchanger coated with SP 15 , HAS 15 , and SG 13 . The water swelling (%) for SP 15 was ca. 2 orders of magnitude greater with markedly higher (ca. three- and six-fold) water vapor uptake compared to HAS 15 and SG 13 , respectively. At similar desiccant coating levels on the energy exchanger, the latent effectiveness of the SP 15 system was much improved (4-31%) over the HAS 15 and SG 13 systems at controlled operating conditions. SP 15 is a unique desiccant material with high affinity for water vapor and superior adsorption properties where ca. 98% regeneration was achieved under mild conditions. Therefore, SPs display unique adsorption-desorption properties, herein referred to as the "Goldilocks effect". This contribution reports on the utility of SPs as promising desiccant coatings in air-to-air energy exchangers for ventilation systems or as advanced materials for potential water/energy harvesting applications., Competing Interests: The authors declare no competing financial interest.

A thiourea-based tripodal receptor L substituted with 3-nitrophenyl groups has been synthesized, and the binding affinity for a variety of anions has been studied by 1 H NMR titrations and nuclear Overhauser enhancement spectroscopy experiments in dimethyl sulfoxide- d 6 . As investigated by 1 H NMR titrations, the receptor binds an anion in a 1:1 binding mode, showing the highest binding and strong selectivity for sulfate anion. A competitive colorimetric assay in the presence of fluoride suggests that the sulfate is capable of displacing the bound fluoride, showing a sharp visible color change. The strong affinity of L for sulfate was further supported by UV-vis titrations and density functional theory (DFT) calculations. Time-dependent DFT calculations indicate that the fluoride complex possesses a different optical absorption spectrum (due to charge transfer between the fluoride and the surrounding ligand) than the sulfate complex, reflecting the observed colorimetric change in these two complexes. The receptor was further tested for its biocompatibility on primary human foreskin fibroblasts and HeLa cells, exhibiting an excellent cell viability up to 100 μM concentration., Competing Interests: The authors declare no competing financial interest.

Understanding the intermolecular interactions between nucleotides and artificial receptors is crucial to understanding the role of nucleic acids in living systems. However, direct structural evidence showing precise interactions and bonding features of a nucleoside monophosphate (NMP) with a macrocycle-based synthetic molecule has not been provided so far. Herein, we present two novel crystal structures of uridine monophosphate (UMP) and thymidine monophosphate (TMP) complexes with a macrocycle-based dinuclear receptor. Structural characterization of these complexes reveals that the receptor recognizes UMP through coordinate-covalent interactions with phosphates and π-π stackings with nucleobases and TMP through coordinate-covalent interactions with phosphate groups. Furthermore, the receptor has been shown to effectively bind nucleoside monophosphates in the order of GMP > AMP > UMP > TMP > CMP in water at physiological pH, as investigated by an indicator displacement assay.

The anion-binding properties of two tripodal-based hexaureas appended with the m -nitrophenyl ( 1 ) and pentafluorophenyl ( 2 ) groups have been studied both experimentally and theoretically, showing strong affinities for sulfate over other inorganic oxoanions such as hydrogen sulfate, dihydrogen phosphate, bicarbonate, nitrate, and perchlorate. The structural analysis of the sulfate complex with 1 reveals that the receptor organizes all urea-binding sites toward the cavity at precise orientations around a tetrahedral sulfate anion to form an ideal C 3 -symmetric sulfate complex that is stabilized by 12 hydrogen-bonding interactions. The receptor and the encapsulated sulfate are located on the threefold axis passing through the bridgehead nitrogen of 1 and the sulfur atom of the anionic guest. The high-level density functional theory calculations support the crystallographic results, demonstrating that the C 3 -symmetric conformation of the sulfate complex is achieved due to the complementary NH···O between the receptor and sulfate.

The insulin superfamily of peptides is ubiquitous within vertebrates and invertebrates and is characterized by the presence of a set of three disulfide bonds in a unique disposition. With the exception of insulin-like growth factors I and II, which are single chain peptides, the remaining 8 members of the human insulin superfamily are two-chain peptides containing one intramolecular and two intermolecular disulfide bridges. These structural features have long made the chemical synthesis of the peptides a considerable challenge, in particular, including their correct disulfide bond pairing and formation. However, they have also afforded the opportunity to develop modern solid phase synthesis methods for the preparation of such peptides that incorporate novel or improved chemical methods for the controlled introduction of both disulfide bonds and their surrogates, both during and after peptide chain assembly. In turn, this has enabled a detailed probing of the structure and function relationship of this small but complex superfamily of peptides. After initially using and subsequently identifying significant limitations of the approach of simultaneous random chain combination and oxidative folding, our laboratory undertook to develop robust chemical synthesis strategies in concert with orthogonal cysteine S-protecting groups and corresponding regioselective disulfide bond formation. These have included the separate synthesis of each of the two chains or of the two chains linked by an artificial C-peptide that is removed following postoxidative folding. These, in turn, have enabled an increased ease of acquisition in a good yield of not only members of human insulin superfamily but other insulin-like peptides. Importantly, these successful methods have enabled, for the first time, a detailed analysis of the role that the disulfide bonds play in the structure and function of such peptides. This was achieved by selective removal of the disulfide bonds or by the judicious insertion of disulfide isosteres that possess structurally subtle variations in bond length, hydrophobicity, and angle. These include lactam, dicarba, and cystathionine, each of which has required modifications to the peptide synthesis protocols for their successful placement within the peptides. Together, these synthesis improvements and the novel chemical developments of cysteine/cystine analogues have greatly aided in the development of novel insulin-like peptide (INSL) analogues, principally with intra-A-chain disulfide isosteres, possessing not only improved functional properties such as increased receptor selectivity but also, with one important and unexpected exception, greater in vivo half-lives due to stability against disulfide reductases. Such analogues greatly will aid further biochemical and pharmacological analyses to delineate the structure-function relationships of INSLs and also future potential drug development.