Search

The carbon coating strategy has emerged as an indispensable approach to improve the conductivity of polyanionic cathodes. However, owing to the complex reaction process between precursors of carbon and cathode, establishing a unified screening principle for carbonaceous precursors remains a technical challenge. Herein, we reveal that carbonaceous precursor pyrolysis chemistry undeniably influences the formation process and performance of Na 3 V 2 (PO 4 ) 3 (NVP) cathodes from in situ insights. By investigating three types of carbonaceous precursors, it is found that O/H-containing functional groups can provide more bonding sites for cathode precursors and generate a reducing atmosphere by pyrolysis, which is beneficial to the formation of polyanionic materials and a uniform carbon coating layer. Conversely, excessive pyrolysis of functional groups leads to a significant amount of gas, which is detrimental to the compactness of the carbon layer. Furthermore, the substantial presence of residual heteroatoms diminishes graphitization. In this case, it is demonstrated that carbon dots (CDs) precursors with suitable functional groups can comprehensively enhance the Na + migration rate, reversibility, and interface stability of the cathode material. As a result, the NVP/CDs cathode displays outstanding capacity retention, maintaining 92% after 10,000 cycles at a high rate of 50 C. Altogether, these findings provide a valuable benchmark for carbon source selection for polyanionic cathodes.

Polycrystalline lithium manganese oxide (LMO) is known to suffer from severe surface structure degradation and electrochemical polarization due to its mixed crystal plane orientations. A hexagonal prism single-crystal LMO (LMOS-HP), engineered through the SrO-induced preferential growth effect, features the most stable {111} top surfaces and the fastest Li + diffusion {110} side surfaces, effectively addressing these challenges. Consequently, LMOS-HP exhibits superior electrochemical capability, with only 0.021% capacity fading per cycle after 500 cycles and achieves a discharge capacity of 81.9 mAh g -1 at 20C. This innovative design offers a promising approach for tuning surface crystal orientation to improve performance.

Al impurity is among the most likely components to enter the spent lithium-ion battery (LIB) cathode powder due to the strong adhesion between the cathode material and the Al current collector. However, high-value metal elements tend to be lost during the deep removal of Al impurities to obtain high-purity metal salt products in the conventional hydrometallurgical process. In this work, the harmful Al impurity is designed as a beneficial ingredient to upcycle high-voltage LiCoO 2 by incorporating robust Al-O covalent bonds into the bulk of the cathode assisted with Ti modification. Benefiting from the strong Al-O and Ti-O bonds in the bulk, the irreversible phase transitions of the upcycled R-LCO-AT have been significantly suppressed at high voltages, as revealed by in situ XRD. Moreover, a Li + -conductive Li 2 TiO 3 protective layer is constructed on the surface of R-LCO-AT by pinning slow-diffusion Ti on the grain boundaries, resulting in improved Li + diffusion kinetics and restrained interface side reactions. Consequently, the cycle stability and rate performance of R-LCO-AT were significantly enhanced at a high cutoff voltage of 4.6 V, with a discharge capacity of 189.5 mAhg -1 at 1 C and capacity retention of 92.9% over 100 cycles at 4.6 V. This study utilizes the detrimental impurity element to upcycle high-voltage LCO cathodes through an elaborate bulk/surface structural design, offering a strategy for the high-value utilization of spent LIBs.

On the basis of the sustainable concept, organic compounds and carbon materials both mainly composed of light C element have been regarded as powerful candidates for advanced electrochemical energy storage (EES) systems, due to theie merits of low cost, eco-friendliness, renewability, and structural versatility. It is investigated that the carbonyl functionality as the most common constituent part serves a crucial role, which manifests respective different mechanisms in the various aspects of EES systems. Notably, a systematical review about the concept and progress for carbonyl chemistry is beneficial for ensuring in-depth comprehending of carbonyl functionality. Hence, a comprehensive review about carbonyl chemistry has been summarized based on state-of-the-art developments. Moreover, the working principles and fundamental properties of the carbonyl unit have been discussed, which has been generalized in three aspects, including redox activity, the interaction effect, and compensation characteristic. Meanwhile, the pivotal characterization technologies have also been illustrated for purposefully studying the related structure, redox mechanism, and electrochemical performance to profitably understand the carbonyl chemistry. Finally, the current challenges and promising directions are concluded, aiming to afford significant guidance for the optimal utilization of carbonyl moiety and propel practicality in EES systems.

Layered sodium transition-metal (TM) oxides generally suffer from severe capacity decay and poor rate performance during cycling, especially at a high state of charge (SoC). Herein, an insight into failure mechanisms within high-voltage layered cathodes is unveiled, while a two-in-one tactic of charge localization and coherent structures is devised to improve structural integrity and Na + transport kinetics, elucidated by density functional theory calculations. Elevated Jahn-Teller [Mn 3+ O 6 ] concentration on the particle surface during sodiation, coupled with intense interlayer repulsion and adverse oxygen instability, leads to irreversible damage to the near-surface structure, as demonstrated by X-ray absorption spectroscopy and in situ characterization techniques. It is further validated that the structural skeleton is substantially strengthened through the electronic structure modulation surrounding oxygen. Furthermore, optimized Na + diffusion is effectively attainable via regulating intergrown structures, successfully achieved by the Zn 2+ inducer. Greatly, good redox reversibility with an initial Coulombic efficiency of 92.6%, impressive rate capability (86.5 mAh g -1 with 70.4% retention at 10C), and enhanced cycling stability (71.6% retention after 300 cycles at 5C) are exhibited in the P2/O3 biphasic cathode. It is believed that a profound comprehension of layered oxides will herald fresh perspectives to develop high-voltage cathode materials for sodium-ion batteries.

Fluorinated carbon dots (FCDs) have garnered interest owing to their distinct physicochemical properties. Nevertheless, intricate synthesis procedures and quite low fluorine doping levels limit its development and application. Herein, we propose a facile approach based on the Claisen-Schmidt reaction to realize gram-scale synthesis of highly fluorinated carbon dots (up to 20.79 at. %) at room temperature and atmospheric pressure, and a comprehensive exploration of the specific reaction mechanism is conducted. Furthermore, in consideration of the high fluorine content, good dispersibility, and compatibility with polymer electrolyte, the synthesized FCDs are utilized as an additive for PEO-based solid electrolytes of a Li battery to improve its ionic conductivity, interface stability, and mechanical properties. The introduction of FCDs can not only reduce the crystallinity of PEO and enhance the interaction of polymer chains, but also facilitate the establishment of uninterrupted pathways and in situ fluorination at the interface, which is substantiated by both theoretical calculations and experimental findings. As a result, the lithium symmetrical battery can operate stably for 1000 h at a current density of 0.4 mA cm -2 . Simultaneously, the LiFePO 4 /Li battery utilizing the composite electrolyte exhibits a capacity of 130.3 mAh g -1 over 300 cycles while maintaining a capacity retention rate of 95.10%. This study develops a strategy for synthesizing highly fluorinated carbon dots, which demonstrate a useful influence on PEO electrolytes, thus boosting the advancement of FCDs and solid-state batteries.

Further popularization of ultrahigh-Ni layered cathodes for high-energy lithium-ion batteries (LIBs) is hampered by their grievous structural and interfacial degeneration upon cycling. Herein, by leveraging the strong electronegativity and low solubility properties of Sb element, a multifunctional modification that couples atomic/microstructural reconstruction with interfacial shielding is well designed to improve the LiNi 0.94 Co 0.04 Al 0.02 O 2 (NCA) cathode by combining Sb 5+ doping and Li 7 SbO 6 coating. Notably, a robust O framework is established by regulating local O coordination owing to the incorporation of a strong Sb-O covalence bond, leading to the inhibited lattice O evolution at high voltage, as revealed by synchrotron X-ray absorption spectroscopy. Moreover, the radially aligned primary particles with (003) crystallographic texture and refined/elongated sizes are achieved by the pinning of Sb on grain boundaries and are confirmed by scanning transmission electron microscopy, resulting in the fast Li + diffusion and mitigated particle cracking. Additionally, in situ construction of the Li 7 SbO 6 ionic conductive layer on grain boundaries can effectively boost interfacial stability and Li + kinetics. As a result, the optimal Sb-modified NCA delivers a high capacity retention of 94.6% after 200 cycles at 1 C and a good rate capacity of 183.9 mAh g -1 at 10 C, which is expected to be applied to next-generation advanced LIBs.

Na 4 Fe 3 (PO 4 ) 2 (P 2 O 7 ) (NFPP) is an attractive candidate for Na + batteries (SIBs) and Li + batteries (LIBs). However, the real implementation of NFPP has been critically restrained by the inferior intrinsic electronic conductivity. Herein, in situ carbon-coated mesoporous NFPP, obtained via freeze drying and heat treatment, demonstrates highly reversible insertion/extraction of Na + /Li + . Mechanically, the electronic transmission and structural stabilities of NFPP are significantly enhanced by the graphitized carbon coating layer. Chemically, the porous nanosized structure shortens Na + /Li + diffusion paths and increases the contact area between the electrolyte and NFPP, ultimately rendering fast ion diffusion. Greatly, long-lasting cyclability (88.5% capacity retention for over 5000 cycles), decent thermal stability at 60 °C, and impressive electrochemical performances are demonstrated in LIBs. The insertion/extraction mechanisms of NFPP in both SIBs and LIBs are systematically investigated, confirming its small volume expansion and high reversibility. The superior electrochemical performances and the insertion/extraction mechanism investigation confirm the feasibility of utilizing NFPP as a cathode material for Na + /Li + batteries.

The low oxidation potential of a pre-sodiation cathode additive intrinsically prevents decomposition of the electrolyte. Although the introduction of electron-donating substitution reduces the oxidation potential, the additional molecular weight restricts the output capacity. Herein, as theroretically predicted, the electrochemical oxidation potential of sodium carboxylate is manipulated by the electronic effect and regiochemistry of the functionality, in which the stronger electron-donating substituent, p-π conjugation, and optimized regiochemistry can dramatically lead to the lower potential originated from the elevation of the highest occupied molecular orbital level. Thus, benefiting from the para -NH 2 unit accompanied by a conjugated aromatic architecture, molecularly engineered sodium para -aminobenzoate (PABZ-Na) presents a reduced oxidation plateau of 3.45 V. Triggered by the positive compensation merit, sodium-based electrochemical storage systems manifest excellent electrochemical performances. This breakthrough sheds light into the correlation between the electronic effect of the functional group and the oxidation potential of the organic additive, affording in-depth insights into the fundamental guidance of pre-sodiation chemistry.

Nanoengineering of metal anode materials shows great potential for energy storage with high capacity. Zero-dimensional nanoparticles are conducive to acquire remarkable electrochemical properties in sodium-ion batteries (SIBs) because of their enlarged surface active sites. However, it is still difficult to fulfill the requirements of practical applications in batteries owing to the deficiency of efficient and scalable preparation approaches of high-performance metal electrode materials. Herein, an electrochemical cathodic corrosion method is proposed for the tunable preparation of nanostructured antimony (Sb) by the introduction of a surfactant, which can efficiently avoid the agglomeration of Sb atom clusters generated from the Zintl compound and further stacking into bulk during the electrochemical process. Subsequently, graphene as the support and conductive matrix is uniformly interspersed by generating Sb nanoparticles (Sb/Gr). Moreover, the reversible crystalline-phase evolution of Sb ⇋ NaSb ⇋Na 3 Sb for Sb/Gr was studied by in situ X-ray diffraction (XRD). Benefiting from the interconnection of the conductive network, Sb/Gr anodes deliver a high capacity of 635.34 mAh g -1 , a retained capacity of 507.2 mAh g -1 after 150 cycles at 0.1 C (1 C = 660 mAh g -1 ), and excellent rate performance with the capacities of 473.41 and 405.09 mAh g -1 at 2 and 5 C, respectively. The superior cycle stability with a capacity of 346.26 mAh g -1 is achieved after 500 cycles at 2 C. This electrochemical approach offers a new route toward developing metal anodes with designed nanostructures for high-performance SIBs.

Transition metal phosphides (TMPs) have gained increased attention in energy storage due to their potential applications for optimizing electrochemical performances. However, their preparation routes usually require highly toxic and flammable phosphorus sources with strict reaction conditions. The existence of multiple energetically favorable stoichiometries also makes it a challenge to achieve phase control of metal phosphides. In this work, we have successfully realized the phase-controllable framework of cobalt phosphide from Co 2 P to CoP by employing a semi-interpenetrating network (semi-IPN) hydrogel as a precursor. Interestingly, the semi-IPN hydrogel could serve as a self-assembly/sacrificing template to accomplish 3D space confinement, where poly(vinylphosphonic acid) (PVPA) was identified as a prominent phosphorus source due to its strong metal complexation ability and high thermal stability. Furthermore, this route is successfully extended to the synthesis of other TMPs, including Fe 2 P, Ni 2 P, and Cu 3 P. The specific structure of cobalt phosphides gives rise to superior lithium storage performance, showing superior cycling stability (495.2 mAh g -1 after 1000 cycles at 2.0 A g -1 ). This approach envisions a new outlook on exploitation of essential functional hydrogels for the creation of inorganic materials toward sustainable energy development.

Discovering cathode materials composed of earth-abundant elements has become the current priority for developing sodium-ion batteries (SIBs) to meet the ever-increasing demand of large-scale energy storage. Herein, for the first time, layered Na x MO 2 (M = Cu, Fe, Mn) cathodes are successfully prepared by directly using concentrated chalcopyrite ores as precursors. Greatly, impurity elements like Si and Ca are found to be crucial to tailoring the phase structure of as-obtained layered oxides as a P2 or O3 type, which removes the traditional concern that the impurities may restrict the utilization of natural ores. More interestingly, a certain amount of the Ca elements remaining in the Na sites through a self-doping process endows the P2-type products with enhanced structural stability. In half-cells, P2-type Na x MO 2 with self-doped Ca elements shows superior rate capability and cycling stability (56 mAh g -1 at 5 C and 90% capacity retention after 100 cycles at 1 C). In contrast, less impurity elements are favorable for O3-type oxides to achieve a high capacity of 107 mAh g -1 at 0.1 C and 84% capacity retention after 200 cycles at 2 C. This new strategy would efficiently shorten the process for preparing electrode materials and open a feasible route to construct cheap and durable SIBs.

Transition-metal selenides have captured sustainable research attention in energy storage and conversion field as promising anodes for sodium-ion batteries. However, for the majority of transition metal selenides, the potential windows have to compress to 0.5-3.0 V for the maintenance of cycling and rate capability, which largely sacrifices the capacity under low voltage and impair energy density for sodium full batteries. Herein, through introducing diverse metal ions, transition-metal selenides consisted of different composition doping (CoM-Se 2 @NC, M = Ni, Cu, Zn) are prepared with more stable structures and higher conductivity, which exhibit superior cycling and rate properties than those of CoSe 2 @NC even at a wider voltage range for sodium ion batteries. In particular, Zn 2+ doping demonstrates the most prominent sodium storage performance among series materials, delivering a high capacity of 474 mAh g -1 after 80 cycles at 500 mA g -1 and rate capacities of 511.4, 382.7, 372.1, 339.2, 306.8, and 291.4 mAh g -1 at current densities of 0.1, 0.5, 1.0, 1.4, 1.8, and 2.0 A g -1 , respectively. The composition adjusting strategy based on metal ions doping can optimize electrochemical performances of metal selenides, offer an avenue to expand stable voltage windows, and provide a feasible approach for the construction of high specific energy sodium-ion batteries.

Given its competitive theoretical capacity, Bi 2 MoO 6 is deemed as a promising anode material for the realization of efficient Li storage. Considering the severe capacity attenuation caused by the lithiation-induced expansion, it is essential to introduce effective modification. Remarkably, in this work, Bi 2 MoO 6 microsphere with double-layered spherical shells are successfully prepared, and the polyaniline are coated on both inner and outer surfaces of double-layered spherical shells, working as buffer layers to strain the volume expansion during electrochemical cycling. Inspiringly, when utilized as anode in LIBs, the specific capacity of Bi 2 MoO 6 @PANI is maintained at 656.3 mAh g -1 after 200 cycles at 100 mA g -1 , corresponding to a high capacity of 82%. However, the counterpart of individual Bi 2 MoO 6 is only 36%. This result confirms that the polyaniline layer can dramatically promote stable cycling performances. Supported by in situ EIS and ex situ technologies followed by detailed analysis, the enhanced pseudocapacitance-dominated contributions and electron/ion transfer rate, benefiting from the combination with polyaniline, are further proved. This work confirms the significant effect of polyaniline on the ultrastable energy storage, further providing an in-depth sight on the impacts of polyaniline coating to the electrical conductivity as well as the resistances of electron/ion transport.

The transition-metal sulfide, CuS, is deemed a promising material for energy storage, mainly derived from its good chemisorption and conductivity, although serious capacity fading limits its advancement within reversible lithium storage. Learning from the gold extraction method utilizing the lime-sulfur-synthetic-solution, a CuS@S hybrid utilizing CaS x as both sulfur resource and reductant-oxidant is prepared, which is an efficient approach to apply the metallurgy for the preparation of electrode materials. Regulating the amount of CuCl 2 , the CuS@S is induced to reach a molecular-level hybrid. When utilized as an anode within a lithium-ion battery, it presents the specific capacity of 514.4 mA h g -1 at 0.1 A g -1 over 200 cycles. Supported by the analyses of pseudo-capacitive behaviors, it is confirmed that the CuS matrix with the suitable content of auxiliary sulfur could improve the durability of the CuS-based anode. Expanding the wider application within lithium-sulfur batteries, the synchronous growth of CuS@S exhibits stronger chemisorption with polysulfides than the mechanical mixture of CuS and S. A suite of in situ electrochemical impedance spectroscopy studies further investigates the stable resistances of the CuS@S within the charge/discharge process, corresponding to the reversible structure evolution. This systematic work may provide a practical fabricating route of metal sulfides for scalable energy storage applications.

Sodium-ion batteries (SIBs), as the promising commercial energy system, are restricted by their sluggish kinetics and low sodium-ion storage. Metal selenide possesses good conductivity and capacity but still suffers from the stacked problem and volume expansion. Significantly, CoSe 2 /C is successfully prepared with the assistance of citric acid as both a chelating agent and carbon precursor, displaying that cobblestone-like nanospheres with the radii (<25 nm) distribute uniformly in the carbon matrix. It is expected that the established Co-O-C bonds enhance the stability of the structure with faster ion shuttling. With the available electrolyte (NaCF 3 SO 3 /diethylene glycol dimethyl ether) in a potential window range from 0.5 to 3.0 V, the as-obtained sample shows the ultralong lifespan at 4.5 A g -1 , retaining a capacity of 345 mA h g -1 after 10 000 cycles. From the detailed kinetic analysis, it is clear that the surface-controlled electrochemical behavior mainly contributes to the excellent large-current cycling stability and Na storage capacity. The ex situ results support that the crystal and morphological structure remains stable. This work is anticipated to enhance the in-depth understanding of the CoSe 2 /C anode and supply a facile manner to obtain electrode materials for SIBs.

Considering serious pollution from the traditional chemical synthesis process, the resource-rich, clean, and first-hand electrode materials are greatly desired. Natural ore molybdenite (MoS 2 ), as the low-cost, high-yield, and environmental-friendly natural source, is investigated as a first-hand anode material for lithium-ion batteries (LIBs). Compared with chemosynthetic pure MoS 2 , natural molybdenite provides an ordered ion diffusion channel more effectively owing to its excellent characteristics, containing well-crystalline, large lattice distance, and trance dopants. Even at a large current density of 2.0 A g -1 , a natural molybdenite electrode employing a carboxymethyl cellulose binder displays an initial charge capacity of 1199 mA h g -1 with a capacity retention of 72% after 1000 cycles, much higher than those of the electrodes utilizing a poly(vinylidene fluoride) binder. These types of binders play a crucial role in stabilizing a microstructure demonstrated by ex situ scanning electron microscopy and in affecting pseudocapacitive contributions quantitatively determined by a series of kinetic exploration. Briefly, this work might open up a new avenue toward the use of natural molybdenite as a first-hand LIB anode in scalable applications and deepen our understanding on the fundamental effect of binders in the metal-sulfide.

One-dimensional Sb 2 Se 3 /C rods are prepared through self-assembly by inducing anisotropy, and their corresponding sodium storage behaviors are evaluated, presenting excellent electrochemical performances with superior cycling stability and rate capability. Sb 2 Se 3 delivers a high initial charge capacity of 657.6 mA h g -1 at a current density of 0.2 A g -1 between 2.5 and 0.01 V. After 100 cycles, the reversible capacity of Sb 2 Se 3 /C is still retained at 485.2 mA h g -1 . Even at a high rate current density of 2.0 A g -1 , the charge capacity is still retained at 311.5 mA h g -1 . Through the analysis of cyclic voltammetry and in situ electrochemical impedance spectroscopy, the in-depth understanding of high rate performances is explored effectively. Briefly, the sodium storage performance of Sb 2 Se 3 /C is observably enhanced, benefiting from the 1D structure and the introduction of a carbon layer with robust structure stability and conductivity.

Antimony represents a class of unique functional materials in sodium-ion batteries with high theoretical capacity (660 mA h g -1 ). The utilization of carbonaceous materials as a buffer layer has been considered an effective approach to alleviate rapid capacity fading. Herein, the antimony/nitrogen-doping porous carbon (Sb/NPC) composite with polyaniline nanosheets as a carbon source has been successfully achieved. In addition, our strategy involves three processes, a tunable organic polyreaction, a thermal annealing process, and a cost-effective reduction reaction. The as-prepared Sb/NPC electrode demonstrates a great reversible capacity of 529.6 mA h g -1 and an outstanding cycling stability with 97.2% capacity retention after 100 cycles at 100 mA g -1 . Even at 1600 mA g -1 , a superior rate capacity of 357 mA h g -1 can be retained. Those remarkable electrochemical performances can be ascribed to the introduction of a hierarchical porous NPC material to which tiny Sb nanoparticles of about 30 nm were well-wrapped to buffer volume expansion and improve conductivity.

Nanostructured black anatase titania with oxygen vacancies (OVs) is efficiently obtained and employed as an anode in sodium-ion batteries (SIBs) for the first time. The incorporation of OVs into TiO2 is demonstrated to render considerably enhanced-rate performances, higher initial capacities, and an accelerated electrochemical activation process during cycling, derived from the boosted intrinsic electric conductivity and improved kinetics of Na uptake. Bestowed with the integrated merits of OVs and shortened Na ion diffusion length in the nanostructure, black titania delivers a reversible specific capacity of 207.6 mAh g(-1) at 0.2 C, retains 99.1% over 500 cycles at 1 C stably, and still maintains 91.2 mAh g(-1) even at the high rate of 20 C. Density functional theory (DFT) calculations suggest that the lower sodiation energy barrier of anatase with OVs enables a more favorable Na intercalation into black anatase. Thus, it is of great significance to introduce OVs into TiO2 to stimulate ultrafast and durable sodium-storage properties, which also offers a potential strategy to project more superior electrodes, utilizing internal defects.

An electrochemical alternating voltage approach of producing NiCo double hydroxide (NiCoDH) layered ultrathin nanoflakes with large specific surface area (355.8 m(2) g(-1)), remarkable specific capacitance and rate capability is presented. The obtained NiCoDH as anode for asymmetric supercapacitors shows excellent energy density of 17.5 Wh kg(-1) at high power density of 10.5 kW kg(-1) and cycling stability (91.2% after 10,000 cycles).

Due to the high theoretical capacity of 946 mAh g(-1), Sb2S3 can be employed as promising electrode material for sodium-ion batteries (SIBs). Herein, the sodium storage behaviors of one-dimensional (1D) Sb2S3-based materials (Sb2S3 and Sb2S3@C rods) are successfully studied for the first time, displaying good cyclability and rate capability owing to their unique morphology and structure. Specifically, the Sb2S3@C rods electrode presents greatly enhanced electrochemical properties, resulting from the introduction of thin carbon layers which can effectively alleviate the strain caused by the large volume change and simultaneously improve the conductivity of electrode during cycling. At a current density of 100 mA g(-1), it delivers a high capacity of 699.1 mAh g(-1) after 100 cycles, which corresponds to 95.7% of the initial reversible capacity. Even at a high current density of 3200 mA g(-1), the capacity can still reach 429 mAh g(-1). This achievement may be a significant exploration for develpoing novel 1D Sb-based materials or metal sulfide SIBs anodes.

The electrochemical properties of Na3V2(PO4)2F3 cathode utilized in the sodium ion battery are investigated, and the ion migration mechanisms are proposed as combined via the first principles calculations. Two different Na sites, namely, the Na(1) and Na(2) sites, could cause two sodium ions of Na3V2(PO4)2F3 to be extracted or inserted by a two-step electrochemical process accompanied by structural reorganization that could be responsible for the redox reaction of V(3+/4+). Because the calculated average voltage (V(avg)) of the second charging plateau is 4.04 V for the optimized system but 4.38 V for the unoptimized one, the reorganization of the cathode system can make a stable configuration and lower the extraction energy. Three designed pathways for sodium ions along the x, y, z directions in Na3V2(PO4)2F3, known as a 3D ions transport tunnel, have activation energies (Ea) of 0.449, 0.2, and 0.323 eV, respectively, by using DFT calculations, demonstrating the different feasibilities of the migration directions.

Sodium-ion batteries (SIBs) have come up as an alternative to lithium-ion batteries (LIBs) for large-scale applications because of abundant Na storage in the earth's crust. Antimony (Sb) hollow nanospheres (HNSs) obtained by galvanic replacement were first applied as anode materials for sodium-ion batteries and exhibited superior electrochemical performances with high reversible capacity of 622.2 mAh g(-1) at a current density of 50 mA g(-1) after 50 cycles, close to the theoretical capacity (660 mAh g(-1)); even at high current density of 1600 mA g(-1), the reversible capacities can also reach 315 mAh g(-1). The benefits of this unique structure can also be extended to LIBs, resulting in reversible capacity of 627.3 mAh g(-1) at a current density of 100 mAh g(-1) after 50 cycles, and at high current density of 1600 mA g(-1), the reversible capacity is 435.6 mAhg(-1). Thus, these benefits from the Sb HNSs are able to provide a robust architecture for SIBs and LIBs anodes.