Search

The feasibility of pressurized solvents (liquids at a high pressure and/or high temperature without the subcritical point being reached) has been newly investigated to accelerate enzymatic hydrolysis processes of mussel tissue for multielement determinations. The target elements (Al, As, Cd, Co, Cu, Fe, Hg, Li, Mn, Pb, Se, Sr, V, and Zn) were released from dried mussel tissue by action of two proteases (pepsin and pancreatin), and they have been evaluated by inductively coupled plasma optical emission spectrometry (ICP-OES). Variables inherent to the enzymatic activity (pH, ionic strength, temperature, and enzyme mass) and factors affecting pressurization (static time, pressure, and number of cycles) were simultaneously studied by applying a Plackett-Burman design (PBD) as the screening method. Results showed that PH, ionic strength, and temperature were the most statistically significant factors (confidence interval of 95%) under pressurized conditions for pepsin, while pH and ionic strength affected pancreatin activity. This means that metal extraction is mostly attributed to enzymatic activity. The static time (enzymatic hydrolysis time) was found statistically nonsignificant for most of the elements, meaning that the hydrolysis procedure can be finished within a 2-15 mm range. For pepsin, optimized conditions (pH 1.0, temperature 40 °C, pressure 1500 psi, static time 2 mm, and number of cycles 3) gave quantitative extractions for As, Cd, Co, Cu, Hg, Li, Mn, Pb, Se, Sr, V, and Zn. The pepsin mass was 0.05 g, and the solution was Milli-Q water at pH 1.0 (adjusted with hydrochloric acid). For pancreatin, quantitative recoveries were only reached for As, Cd, Cu, Li, Pb, and Sr at room temperature, at a pressure of 1500 psi, for a static time of 2 mm and a number of cycles of 3. The extraction solution was a 0.3 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer at a pH of 7.5 working at room temperature. Around 0.5 g of diatomaceous earth was used as dispersing agent for hydrolyses with either enzyme. Analytical performances, such as limits of detection and quantification and repeatability of the overall procedure, have been established. Finally, accuracy of the methods was assessed by analyzing seafood certified reference materials (GBW-08571, DORM-2, DOLT-3, TORT-2), fatty tissues certified reference materials (BCR 185, NIST 1577b), and fibrous certified reference materials (BCR 62, GBW-08501). [ABSTRACT FROM AUTHOR]

A novel analytical method based on solid-phase extraction (SPE) and liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) for the determination of UV sunscreen agents in the water environment is presented. After a thorough investigation of SPE and LC-MS/MS conditions, it permits the enrichment and determination of nine of these compounds in a single methodology, including three very polar sulfonates (e.g., 2-phenylbenzimidazole-5-sulfonic acid, PBSA) and six other less polar compounds (e.g., benzophenone-3, BP-3; octocrylene, OC,...). Other important matters of concern in the determination of UV filters at trace levels in water, i.e., adsorption on glassware and blank contamination problems, have also been discussed and minimized. This methodology affords detection limits between 7 and 46 ng L-1 and SPE recoveries in the range 63-102% from different real water matrixes, except for butylmethoxydibenzoylmethane (BM-DBM), which was not determinable in wastewater samples due to adsorption problems. The application of the method allowed reporting the levels of benzophenone-4 (BP-4) in environmental water samples for the first time, where it was identified as one of the most important in concentration among the UV filters studied, particularly in wastewater (237-1481 ng L-1).