8 results on '"Li, Jixue"'
Search Results
2. Synthesis and Characterization of Highly Luminescent CdSe-Core CdS/Zn0.5Cd0,5S/ZnS Multishell Nanocrystals.
- Author
-
Xie, Renguo, Kolb, Ute, Li, Jixue, Basché, Thomas, and Mews, Alf
- Subjects
- *
CADMIUM , *SELENIUM , *NANOCRYSTALS , *ORGANIC compounds , *CRYSTALS , *NANOPARTICLES - Abstract
We report on the preparation and structural characterization of CdSe nanocrystals, which are covered by a multishell structure from CdS and ZnS. By using the newly developed successive ion layer adhesion and reaction (SILAR) technique, we could gradually change the shell composition from CdS to ZnS in the radial direction. Because of the stepwise adjustment of the lattice parameters in the radial direction, the resulting nanocrystals show a high crystallinity and are almost perfectly spherical, as was investigated by X-ray diffraction and electron microscopy. Also, due to the radial increase of the respective valence- and conduction-band offsets, the nanocrystals are well electronically passivated. This leads to a high fluorescence quantum yield of 70-85% for the amine terminated multishell particles in organic solvents and a quantum yield of up to 50% for mercapto propionic acid-covered particles in water. Finally, we present experimental results that substantiate the superior photochemical and colloidal stability of the multishell particles. [ABSTRACT FROM AUTHOR]
- Published
- 2005
- Full Text
- View/download PDF
3. Interlayer Coupling Dependent Discrete H → T' Phase Transition in Lithium Intercalated Bilayer Molybdenum Disulfide.
- Author
-
Ji X, Ding D, Guan X, Wu C, Qian H, Cao J, Li J, and Jin C
- Abstract
In this work, the interlayer coupling dependent lithium intercalation induced phase transition in bilayer MoS
2 (BL-MoS2 ) was investigated using an atomic-resolution annual dark-field scanning transmission electron microscope (ADF-STEM). It was revealed that the lithiation induced H → T' phase transition in BL-MoS2 strongly depended on the interlayer twist angle; i.e., the H → T' phase transition occurred in well-stacked H phase BL-MoS2 (with a twist angle of θt = 0°) but not for θt ≠ 0° BL-MoS2 . The lithiated BL-MoS2 appeared in homophase stacking, either T'/T' or H/H (locally, no phase transformation) stacking, without any heterophase stacking such as H/T' or T'/H observed. This finding indicated the H → T' phase transition occurred via a domain-by-domain mode rather than layer-by-layer. Up to 15 types of stacking orders were experimentally identified locally in lithiated bilayer T'-MoS2 , and the formation mechanism was attributed to the discrete interlayer translation with a unit step of ( m /6 a , n /6 b ) ( m , n = 0, 1, 2, 3), where a and b were the primitive lattice vectors of T'-MoS2 . Our experimental results were further corroborated by ab initio density functional theory (DFT) calculations, where the occurrence of different stacking orders can be quantitatively correlated with the variation of intercalated lithium contents into the BL-MoS2 . The present study aids in the understanding of the phase transition mechanisms in atomically thin 2D transition metal dichalcogenides (TMDCs) and will also shed light on the precisely controlled phase engineering of 2D materials for memory applications.- Published
- 2021
- Full Text
- View/download PDF
4. Single-Crystal BiFeO 3 Nanoplates with Robust Antiferromagnetism.
- Author
-
Yang X, Zeng R, Ren Z, Wu Y, Chen X, Li M, Chen J, Zhao R, Zhou D, Liao Z, Tian H, Lu Y, Li X, Li J, and Han G
- Abstract
Freestanding and single-crystal BiFeO
3 (BFO) nanoplates have been successfully synthesized by a fluoride ion-assisted hydrothermal method, and the thickness of the nanoplates can be effectively tailored from 80 to 380 nm by the concentration of fluoride ions. It is revealed that BFO nanoplates grew via an oriented attachment of layer by layer, giving rise to the formation of the inner interface within the nanoplates. In particular, antiferromagnetic (AFM) phase-transition temperature (Néel temperature, TN ) of the BFO nanoplates is significantly enhanced from typical 370 to ∼512 °C, whereas the Curie temperature (TC ) of the BFO nanoplates is determined to be ∼830 °C, in good agreement with a bulk value. The combination of scanning transmission electron microscopy, electron energy loss spectroscopy, and the first-principle calculations reveals that the interfacial tensile strain remarkably improves the stability of AFM ordering, accounting for the significant enhancement in TN of BFO plates. Correspondingly, the tensile strain induced the polarization and oxygen octahedral tilting has been observed near the interface. The findings presented here suggest that single-crystal BFO nanoplate is an ideal system for exploring an intrinsic magnetoelectric property, where a tensile strain can be a very promising approach to tailor AFM ordering and polarization rotation for an enhanced coupling effect.- Published
- 2018
- Full Text
- View/download PDF
5. Highly mesoporous single-crystalline zeolite beta synthesized using a nonsurfactant cationic polymer as a dual-function template.
- Author
-
Zhu J, Zhu Y, Zhu L, Rigutto M, van der Made A, Yang C, Pan S, Wang L, Zhu L, Jin Y, Sun Q, Wu Q, Meng X, Zhang D, Han Y, Li J, Chu Y, Zheng A, Qiu S, Zheng X, and Xiao FS
- Abstract
Mesoporous zeolites are useful solid catalysts for conversion of bulky molecules because they offer fast mass transfer along with size and shape selectivity. We report here the successful synthesis of mesoporous aluminosilicate zeolite Beta from a commercial cationic polymer that acts as a dual-function template to generate zeolitic micropores and mesopores simultaneously. This is the first demonstration of a single nonsurfactant polymer acting as such a template. Using high-resolution electron microscopy and tomography, we discovered that the resulting material (Beta-MS) has abundant and highly interconnected mesopores. More importantly, we demonstrated using a three-dimensional electron diffraction technique that each Beta-MS particle is a single crystal, whereas most previously reported mesoporous zeolites are comprised of nanosized zeolitic grains with random orientations. The use of nonsurfactant templates is essential to gaining single-crystalline mesoporous zeolites. The single-crystalline nature endows Beta-MS with better hydrothermal stability compared with surfactant-derived mesoporous zeolite Beta. Beta-MS also exhibited remarkably higher catalytic activity than did conventional zeolite Beta in acid-catalyzed reactions involving large molecules.
- Published
- 2014
- Full Text
- View/download PDF
6. Extraordinarily high activity in the hydrodesulfurization of 4,6-dimethyldibenzothiophene over Pd supported on mesoporous zeolite Y.
- Author
-
Fu W, Zhang L, Tang T, Ke Q, Wang S, Hu J, Fang G, Li J, and Xiao FS
- Abstract
Design and preparation of highly active hydrodesulfurization (HDS) catalysts is very important for the removal of air pollution. Herein, we report an extraordinarily active HDS catalyst, which is synthesized by loading of Pd on mesoporous zeolite Y (Pd/HY-M). The mesoporous zeolite Y is successfully synthesized using a water glass containing N,N-dimethyl-N-octadecyl-N-(3-triethoxysilylpropyl) ammonium [(C(2)H(5)O)(3)SiC(3)H(6)N(CH(3))(2)C(18)H(37)](+) cation as a mesoscale template. Compared with mesoporous Beta and ZSM-5 supported Pd catalysts (80.0% and 73.4% for Pd/HBeta-M and Pd/HZSM-5-M, respectively) as well as commercial catalyst of γ-Al(2)O(3) supported Pd catalyst (31.4%), Pd/HY-M catalyst exhibited very high activity in HDS of 4,6-dimethyldibenzothiophene (4,6-DM-DBT, 97.3%). The higher activity of Pd/HY-M than that of Pd/HBeta-M and Pd/HZSM-5-M is assigned to the larger micropore size of zeolite Y compared to that of Beta and ZSM-5. Theoretical simulation and adsorption experimental data show that 4,6-DM-DBT has difficulty entering the micropores of ZSM-5 and Beta zeolites, but the micropores of Y zeolite are accessible.
- Published
- 2011
- Full Text
- View/download PDF
7. Effect of rare-earth component of the RE/Ni catalyst on the formation and nanostructure of single-walled carbon nanotubes.
- Author
-
Yao M, Liu B, Zou Y, Wang L, Cui T, Zou G, Li J, and Sundqvist B
- Abstract
A systematic experimental study has been carried out on the efficiency of bimetallic catalysts based on Ni and the rare-earth elements Y, La, Ce, Nd, Gd, Tb, Dy, Ho, Er, and Lu (group A) and Eu, Sm, Yb, and Tm (group B) in the synthesis of single-walled carbon nanotubes (SWNTs). The two groups give quite different results when analyzed by a combination of SEM/TEM and Raman and UV-NIR spectroscopies. The elements in group A have an obvious catalytic effect and increase the yield of SWNTs dramatically, whereas those in group B are not efficient catalysts. The diameter distribution of the synthesized SWNTs was also affected by the rare-earth element used. For group A metals, there is a tendency that the fraction of small-diameter tubes decreases with decreasing ionic radius of the rare-earth element used. EDX and X-ray analyses indicate that group A metals deposit on the cathode deposits and form rare-earth carbides, whereas no group B metals are found in cathode deposits, except for a small amount of Tm present in the form of thulium carbide. Further analysis indicates that there is a very strong correlation between the ability to form rare-earth carbides and the catalytic efficiency for the formation of SWNTs.
- Published
- 2006
- Full Text
- View/download PDF
8. Synthesis and evolution of PbS nanocrystals through a surfactant-assisted solvothermal route.
- Author
-
Zhang C, Kang Z, Shen E, Wang E, Gao L, Luo F, Tian C, Wang C, Lan Y, Li J, and Cao X
- Subjects
- Particle Size, Surface Properties, Time Factors, Water chemistry, Lead chemistry, Nanostructures chemistry, Sulfides chemical synthesis, Sulfides chemistry, Surface-Active Agents chemistry, Temperature
- Abstract
We present a surfactant-assisted solvothermal approach for the controllable synthesis of a PbS nanocrystal at low temperature (85 degrees C). Nanotubes (400 nm in length with an outer diameter of 30 nm), bundle-like long nanorods (about 5-15 mum long and an average diameter of 100 nm), nanowires (5-20 mum in length and with a diameter of 20-50 nm), short nanorods (100-300 nm in length and an axial ratio of 5-10), nanoparticles (25 nm in width with an aspect ratio of 2), and nanocubes (a short axis length of 10 nm and a long axis length of 15 nm) were successfully prepared and characterized by transmission electron microscopy, scanning electron microscopy, and powder X-ray diffraction pattern. A series of experimental results indicated that several experimental factors, such as AOT concentration, ratio of [water]/[surfactant], reaction time, and ratio of the reagents, play key roles in the final morphologies of PbS. Possible formation mechanisms of PbS nanorods and nanotubes were proposed.
- Published
- 2006
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.