Search

We demonstrate the functionalization of thin-film composite membranes with zwitterionic polymers and silver nanoparticles (AgNPs) for combating biofouling. Combining hydrophilic zwitterionic polymer brushes and biocidal AgNPs endows the membrane with dual functionality: antiadhesion and bacterial inactivation. An atom transfer radical polymerization (ATRP) reaction is used to graft zwitterionic poly(sulfobetaine methacrylate) (PSBMA) brushes to the membrane surface, while AgNPs are synthesized in situ through chemical reduction of silver. Two different membrane architectures (Ag-PSBMA and PSBMA-Ag TFC) are developed according to the sequence AgNPs, and PSBMA brushes are grafted on the membrane surface. A static adhesion assay shows that both modified membranes significantly reduced the adsorption of proteins, which served as a model organic foulant. However, improved antimicrobial activity is observed for PSBMA-Ag TFC (i.e., AgNPs on top of the polymer brush) in comparison to the Ag-PSBMA TFC membrane (i.e., polymer brush on top of AgNPs), indicating that architecture of the antifouling layer is an important factor in the design of zwitterion-silver membranes. Confocal laser scanning microscopy (CLSM) imaging indicated that PSBMA-Ag TFC membranes effectively inhibit biofilm formation under dynamic cross-flow membrane biofouling tests. Finally, we demonstrate the regeneration of AgNPs on the membrane after depletion of silver from the surface of the PSBMA-Ag TFC membrane. [ABSTRACT FROM AUTHOR]

Microscale swimmers are attractive for targeted drug delivery, noninvasive microsurgery and environmental remediation at different length scales, among which, Marangoni-based swimmers have garnered considerable attention due to their independence of external energy supply. However, applications of most existing chemical swimmers are limited by complex fabrication, high cost, utilization of organic (or even toxic) solvents, poor motility performance, and lack of controllability. To address these challenges, we propose an approach for all-aqueous soft milli-swimmers that utilizes biodegradable hydrogels and biocompatible fuels. This innovative method achieves swimmer body generation and fuel loading in one step by simply dripping one aqueous solution into another, saving fabrication time and minimizing fuel loss during transfer. These all-aqueous soft milli-swimmers have rove beetle-like self-propulsion, which stores low-surface-energy compounds within their body for propulsion on liquid surfaces. Isotropic and anisotropic all-aqueous soft milli-swimmers are formed with precise control over their dimension, morphology, and movement velocity. Through their motion within engineered channels, intricate labyrinths, dynamic air-liquid interfaces, and collective self-assemblies, their remarkable adaptability in complex aqueous environments is demonstrated. Furthermore, the integration of functional nanoparticles endows these all-aqueous milli-swimmers with multifunctionality, expanding their applications in cargo transportation, sensing, and environmental remediation.

The oxidation of the toxic heavy metal thallium(I) (Tl(I)) is an efficient way to enhance Tl removal from water and wastewater. However, few studies have focused on the kinetics of Tl(I) oxidation in water, especially at environmentally relevant pH values. Therefore, the kinetics and mechanisms of Tl(I) oxidation by the common agents KMnO 4 and HOCl under environmentally relevant pH condition were explored in the present study. The results indicated that the pH-dependent oxidation of Tl(I) by KMnO 4 exhibited second-order kinetics under alkaline conditions (pH 8-10) with the main active species being TlOH, while the reaction could be characterized by autocatalysis at pH 4-6, and Mn(III) might also play an essential role in the MnO 2 catalysis. Furthermore, a two-electron transfer mechanism under alkaline conditions was preliminarily proposed by using linear free energy relationships and X-ray photoelectron spectroscopy (XPS) analysis. Distinctively, the reaction rate of Tl(I) oxidation by HOCl decreased with increasing pH, and protonated chlorine might be the main active species. Moreover, the Tl(I)-HOCl reaction could be regarded as first order with respect to Tl(I), but the order with respect to HOCl was variable. Significant catalysis by MnO 2 could also be observed in the oxidation of Tl(I) by HOCl, mainly due to the vacancies on MnO 2 as active sites for sorbing Tl. This study elucidates the oxidation characteristics of thallium and establishes a theoretical foundation for the oxidation processes in thallium removal.

In this study, we demonstrate a highly antifouling thin-film composite (TFC) membrane by grafting a zwitterionic polymer brush via atom-transfer radical-polymerization (ATRP), a controlled, environmentally benign chemical process. Initiator molecules for polymerization were immobilized on the membrane surface by bioinspired catechol chemistry, leading to the grafting of a dense zwitterionic polymer brush layer. Surface characterization revealed that the modified membrane exhibits reduced surface roughness, enhanced hydrophilicity, and lower surface charge. Chemical force microscopy demonstrated that the modified membrane displayed foulant-membrane interaction forces that were 1 order of magnitude smaller than those of the pristine TFC membrane. The excellent fouling resistance imparted by the zwitterionic brush layer was further demonstrated by significantly reduced adsorption of proteins and bacteria. In addition, forward osmosis fouling experiments with a feed solution containing a mixture of organic foulants (bovine-serum albumin, alginate, and natural organic matter) indicated that the modified membrane exhibited significantly lower water flux decline compared to the pristine TFC membrane. The controlled architecture of the zwitterionic polymer brush via ATRP has the potential for a facile antifouling modification of a wide range of water treatment membranes without compromising intrinsic transport properties.

In this paper, we demonstrate an application of a triboelectric nanogenerator (TENG) as a self-powered communication unit. An elaborately designed TENG is used to translate a series of environmental triggering signals into binary digital signals and drives an electronic-optical device to transmit binary digital data in real-time without an external power supply. The elaborately designed TENG is built in a membrane structure that can effectively drive the electronic-optical device in a bandwidth from 1.30 to 1.65 kHz. Two typical communication modes (amplitude-shift keying and frequency-shift keying) are realized through the resonant response of TENG to different frequencies, and two digital signals, i.e., "1001" and "0110", are successfully transmitted and received through this system, respectively. Hence, in this study, a simple but efficient method for directly transmitting ambient vibration to the receiver as a digital signal is established using an elaborately designed TENG and an optical communication technique. This type of the communication system, as well as the implementation method presented, exhibits great potential for applications in the smart city, smart home, password authentication, and so on.

Flexible self-powered sensing is urgently needed for wearable, portable, sustainable, maintenance-free and long-term applications. Here, we developed a flexible and self-powered GaN membrane-based ultraviolet (UV) photoswitch with high on/off ratio and excellent sensitivity. Even without any power supply, the driving force of UV photogenerated carriers can be well boosted by the combination of both built-in electric field and piezoelectric polarization field. The asymmetric metal-semiconductor-metal structure has been elaborately utilized to enhance the carrier separation and transport for highly sensitive UV photoresponse. Its UV on/off ratio and detection sensitivity reach to 4.67 × 10(5) and 1.78 × 10(12) cm·Hz(0.5) W(1-), respectively. Due to its excellent mechanical flexibility, the piezoelectric polarization field in GaN membrane can be easily tuned/controlled based on piezo-phototronic effect. Under 1% strain, a stronger and broader depletion region can be obtained to further enhance UV on/off ratio up to 154%. As a result, our research can not only provide a deep understanding of local electric field effects on self-powered optoelectronic detection, but also promote the development of self-powered flexible optoelectronic devices and integrated systems.

In this study, we have investigated the key factors dictating the cyclic performance of a new type of hybrid sodium-based flow batteries (HNFBs) that can operate at room temperature with high cell voltages (>3 V), multiple electron transfer redox reactions per active ion, and decoupled design of power and energy. HNFBs are composed of a molten Na-Cs alloy anode, flowing aqueous catholyte, and a Na-β″-Al2O3 solid electrolyte as the separator. The surface functionalization of graphite felt electrodes for the flowing aqueous catholyte has been studied for its effectiveness in enhancing V(2+)/V(3+), V(3+)/V(4+), and V(4+)/V(5+) redox couples. The V(4+)/V(5+) redox reaction has been further investigated at different cell operation temperatures for its cyclic stability and how the properties of the solid electrolyte membrane play a role in cycling. These fundamental understandings provide guidelines for improving the cyclic performance and stability of HNFBs with aqueous catholytes. We show that the HNFB with aqueous V-ion catholyte can reach high storage capacity (∼70% of the theoretical capacity) with good Coulombic efficiency (90% ± 1% in 2-30 cycles) and cyclic performance (>99% capacity retention for 30 cycles). It demonstrates, for the first time, the potential of high capacity HNFBs with aqueous catholytes, good capacity retention and long cycling life. This is also the first demonstration that Na-β″-Al2O3 solid electrolyte can be used with aqueous electrolyte at near room temperature for more than 30 cycles.

In this work, by employing halogen elements (fluorine, chlorine, bromine, and iodine) as dopant we demonstrate a unique strategy to enhance the output performance of ZnO-based flexible piezoelectric nanogenerators. For a halogen-doped ZnO nanowire film, dopants and doping concentration dependent lattice strain along the ZnO c-axis are established and confirmed by the EDS, XRD, and HRTEM analysis. Although lattice strain induced charge separation was theoretically proposed, it has not been experimentally investigated for wurtzite structured ZnO nanomaterials. Tuning the lattice strain from compressive to tensile state along the ZnO c-axis can be achieved by a substitution of halogen dopant from fluorine to other halogen elements due to the ionic size difference between dopants and oxygen. With its focus on a group of nonmetal element induced lattice strain in ZnO-based nanomaterials, this work paves the way for enhancing the performance of wurtzite-type piezoelectric semiconductor nanomaterials via lattice strain strategy which can be employed to construct piezoelectric nanodevices with higher efficiency in a cost-effective manner.

The lithium-sulfur (Li-S) battery is a great alternative to the state-of-the-art lithium ion batteries due to its high energy density. However, low utilization of active materials, the insulating nature of sulfur or lithium sulfide (Li2S), and polysulfide dissolution in organic liquid electrolyte lead to low initial capacity and fast performance degradation. Herein, we propose a facile and viable approach to address these issues. This new approach entails synthesis of Li2S/carbon black (Li2S/CB) cores encapsulated by a nitrogen-doped carbon shell with polyvinylpyrrolidone (PVP) assistance. Combining energy-filtered transmission electron microscopy (EFTEM) elemental mappings, XPS and FTIR measurements, it is confirmed that the as-synthesized material has a structure of a Li2S/CB core with a nitrogen-doped carbon shell (denoted as Li2S/CB@NC). The Li2S/CB@NC cathode yields an exceptionally high initial capacity of 1020 mAh/g based on Li2S mass at 0.1 C with stable Coulombic efficiency of 99.7% over 200 cycles. Also, cycling performance shows the capacity decay per cycle as small as 0.17%. Most importantly, to further understand the materials for battery applications, field emission transmission electron microscopy (FETEM) and elemental mapping tests without exposure to air for Li2S samples in cycled cells are reported. Along with the first ever FETEM and field emission scanning electron microscopy (FESEM) investigations of cycled batteries, Li2S/CB@NC cathode demonstrates the capability of robust core-shell nanostructures for different rates and improved capacity retention, revealing Li2S/CB@NC designed here as an outstanding system for high-performance lithium-sulfur batteries.

A high-resolution dynamic tactile/pressure display is indispensable to the comprehensive perception of force/mechanical stimulations such as electronic skin, biomechanical imaging/analysis, or personalized signatures. Here, we present a dynamic pressure sensor array based on pressure/strain tuned photoluminescence imaging without the need for electricity. Each sensor is a nanopillar that consists of InGaN/GaN multiple quantum wells. Its photoluminescence intensity can be modulated dramatically and linearly by small strain (0-0.15%) owing to the piezo-phototronic effect. The sensor array has a high pixel density of 6350 dpi and exceptional small standard deviation of photoluminescence. High-quality tactile/pressure sensing distribution can be real-time recorded by parallel photoluminescence imaging without any cross-talk. The sensor array can be inexpensively fabricated over large areas by semiconductor product lines. The proposed dynamic all-optical pressure imaging with excellent resolution, high sensitivity, good uniformity, and ultrafast response time offers a suitable way for smart sensing, micro/nano-opto-electromechanical systems.