Search

The introduction of poly(tannic acid) (PTA) and cerium ion [Ce(III)] on the surface of α-zirconium phosphate (α-ZrP) endowed the α-ZrP@PTA-Ce(III)/waterborne epoxy composite coating with enhanced corrosion protection and wear resistance performances. The successful preparation of α-ZrP@PTA-Ce(III) was confirmed through X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infrared spectra. PTA improved the compatibility between α-ZrP@PTA-Ce(III) and the waterborne epoxy resin due to the presence of organic groups from tannic acid. The wear resistance test indicated that the incorporation of α-ZrP@PTA-Ce(III) effectively reduced the coefficient of friction and the wear rate. Electrochemical impedance spectroscopy was used to analyze the corrosion protection performance of unbroken coatings and the self-healing ability of scratched coatings. The incorporation of α-ZrP@PTA-Ce(III) improved the protection performace distinctly. In addition, α-ZrP@PTA-Ce(III) endowed the composite coating with dual corrosion inhibition effects, originating from the PTA film, to prevent the penetration of corrosive media and a dense film that came from the Ce(III) cation. The waterborne epoxy system with enhanced corrosion and wear resistance in this paper broadens the application of α-ZrP.

Improving the dispersibility and compatibility of nanomaterials in water-borne epoxy resins is an important means to improve the protection ability and corrosion resistance of coatings. In this study, glycine-functionalized Ti 3 C 2 T x (GT) was used to prepare an epoxy composite coating. The results of Fourier transform infrared spectroscopy and X-ray diffraction showed that glycine was successfully modified. The scanning electron microscopy and transmission electron microscopy results showed that the aggregation of Ti 3 C 2 T x was alleviated. Electrochemical impedance spectroscopy test results show that, after 60 days of immersion, GT coating still shows the best protection performance, and the composite coating | Z | f = 0.01 Hz is 3 orders of magnitude higher than that of the pure epoxy coating. This is mainly because, after adding glycine, the -COOH group on the surface of glycine binds to the -OH group on the surface of Ti 3 C 2 T x , improving the aggregation of Ti 3 C 2 T x itself. At the same time, the -NH group of glycine can also participate in the curing reaction of epoxy resin to strengthen the bonding strength between the coating and the metal. The good dispersion of GT in epoxy resin makes it fill the pores and holes left by epoxy resin curing and strengthen the corrosion resistance. The easy availability and green properties of glycine provide a simple and environmentally friendly method for the modification of Ti 3 C 2 T x .

Room-temperature ferroelectricity in two-dimensional (2D) materials is a potential for developing atomic-scale functional devices. However, as a key step for the technology implementations of 2D ferroelectrics in electronics, the controllable generation of uniform domains remains challenging at the current stage because domain engineering through an external electric field at the 2D limit inevitably leads to large leakage currents and material breakdown. Here, we demonstrate a voltage-free method, the flexoelectric effect, to artificially generate large-scale stripe domains in 2D ferroelectric CuInP 2 S 6 with single domain lateral size at the scale of several hundred microns. With giant strain gradients (∼10 6 m -1 ), we mechanically switch the out-of-plane polarization in ultrathin CuInP 2 S 6 . The flexoelectric control of polarization is understood with a distorted Landau-Ginzburg-Devonshire double well model. Through substrate strain engineering, the stripe domain density is controllable. Our results highlight the potential of developing van der Waals ferroelectrics-based flexible electronics.

Monolayer transition-metal dichalcogenides (TMDs) have provided a platform to investigate the excitonic states at the two-dimensional (2D) limit. The inherent properties of excitons in TMDs, such as the photoluminescence quantum yield, the charge states, and even the binding energy, can be effectively controlled via electrostatic gating, selective carrier doping, or substrate dielectric engineering. Here, aiming for the nonvolatile electrical tunability of excitonic states and thereby the optical property of TMDs, we demonstrate a 2D ferroelectric heterostructure with monolayer MoSe 2 and ultrathin CuInP 2 S 6 (CIPS). In the heterostructure, the electric polarization of CIPS results in continuous, global, and large electronic modulation in monolayer MoSe 2 . With the saturated ferroelectric polarization of CIPS, electron-doped or hole-doped MoSe 2 is realized in a single device. The carrier density tunability in the heterostructure is as high as 5 × 10 12 cm -2 . The nonvolatile behavior of these devices up to 3 months is also characterized. Our results provide a new and practical strategy for low-power consumption and agelong tunable optoelectronic devices.

As one fundamental property of light, polarization has a huge impact in quantum optics and optoelectronics through light-matter interactions. However, the bright and near-unity polarized light emissions in the visible range by solid crystalline materials are scantly realized. Here, we report well-defined quasi two-dimensional (2D) hybrid crystals based on the linear alignment of Cu 2 I 2 -dimer/bidentate ligand hybrid clusters for achieving bright and near-unity linearly polarized light emissions. Using first-principle calculations, we demonstrate that the superaligned transition dipole moments are the key for the observed excellent polarized light emissions. To further enhance the photoluminescence (PL) polarization degree, we fabricate Cu 2 I 2 -dimer-based hybrid nanobelts, which display high PL quantum yield (up to 64%) and ultrahigh PL polarization degree (∼0.99). Our reported copper iodine cluster-based luminescent hybrid materials for bright and highly polarized light emissions will have great potential for future quantum optics applications.