Search

This study aimed to use oleic acid-based ultrasonic-assisted extraction (UAE) to recover carotenoids from carrot pomace and emulsify the enriched-carotenoid oleic acid using spontaneous and ultrasonic-assisted emulsification. The extraction performance of oleic acid was compared with traditional organic solvents, including hexane, acetone, and ethyl acetate. The one-factor experiments were employed to examine the impact of UAE conditions, including liquid-to-solid ratios, temperature, ultrasonic power, and time, on the extraction yield of carotenoids and to find the conditional ranges for the optimization process. The response surface methodology was employed to optimize the UAE process. The second-order extraction kinetic model was used to find the mechanism of oleic acid-based UAE. After that, the enriched-carotenoid oleic acid obtained at the optimal conditions of UAE was used to fabricate nanoemulsions using spontaneous emulsification (SE), ultrasonic-assisted emulsification (UE), and SE-UE. The effect of SE and UE conditions on the turbidity of nanoemulsion was determined. Then, the physiochemical attributes of the nanoemulsion from SE, UE, and spontaneous ultrasonic-assisted emulsification (SE-UE) were determined using the dynamic light scattering method. The extraction yield of carotenoids from carrot pomace by using sonication was the highest. The adjusted optimal conditions were 39 mL/g of LSR, 50 °C, 12.5 min, and 350 W of ultrasonic power. Under optimal conditions, the carotenoid content attained was approximately 163.43 ± 1.83 μg/g, with the anticipated value (166 μg/g). The particle sizes of nanoemulsion fabricated at the proper conditions of SE, UE, and SE-UE were 31.2 ± 0.83, 33.8 ± 0.52, and 109.7 ± 8.24 nm, respectively. The results showed that SE and UE are suitable methods for fabricating nanoemulsions. The research provided a green approach for extracting and emulsifying carotenoids from carrot pomace., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

This study optimized the ultrasonic-assisted extraction (UAE) and microwave-assisted extraction (MAE) processes to acquire phenolics and flavonoids from passion fruit peels using a mixture of ethanol, acetone, and water. An augmented simplex-centroid design was employed to find the suitable volume ratio among solvent ingredients to attain the highest extraction yield of phenolics and flavonoids. One-factor experiments were conducted to investigate the influence of UAE and MAE parameters on the recovery yield of phenolics and flavonoids before the two processes were optimized using Box-Behnken Design (BBD) models. The optimal UAE conditions for recovering phenolics and flavonoids from passion fruit peel powder (PFP) were 28 mL/g of liquid-to-solid ratio (LSR), 608 W of ultrasonic power, and 63 °C for 20 min to acquire total phenolic content (TPC) and total flavonoid content (TFC) at 39.38 mg of gallic acid equivalents per gram of dried basis (mg GAE/g db) and 25.79 mg of rutin equivalents per gram of dried basis (mg RE/g db), respectively. MAE conditions for attaining phenolics and flavonoids from PFP were 26 mL/g of LSR and 606 W of microwave power for 2 min to recover TPC and TFC at 17.74 mg GAE/g db and 8.11 mg RE/g db, respectively. The second-order kinetic model was employed to determine the UAE and MAE mechanism of TPC and TFC and the thermodynamic parameters of the extraction processes. The antioxidant activities of passion fruit peel extracts at optimal conditions were examined to compare the efficiency of UAE and MAE. This study establishes an effective approach for obtaining phenolics and flavonoids from passion fruit peels., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

This research extracted phenolics and terpenoids from Abelmoschus sagittifolius (Kurz) Merr roots using natural deep eutectic solvent-based novel extraction techniques. Twelve natural deep eutectic solvents (NADESs) were produced for recovering phenolics and terpenoids. Citric acid/glucose and lactic acid/glucose, with a molar ratio of 2:1, were determined as the most appropriate NADESs for extracting phenolics and terpenoids, respectively. Afterward, the proper conditions for NADES-based ultrasonic-assisted and microwave-assisted extraction were investigated. Then, the time and liquid-to-solid ratios of ultrasonic- and microwave-combined extraction methods and the sequence of ultrasound and microwave treatments were examined. The conditions of ultrasonic-assisted extraction were 40 mL/g liquid-to-solid ratio, 40% water content, 30°C, 5 min, and 600 W ultrasonic power for the highest terpenoid recovery at 69 ± 2 mg UA/g dw, while 150 W ultrasonic power was suitable for phenolic recovery at 9.56 ± 0.17 mg GAE/g dw. The conditions of microwave-assisted extraction were 50 mL/g liquid-to-solid ratio, 20% water content, 400 W microwave power, and 2 min to acquire the highest phenolics and terpenoids at 22.13 ± 0.75 mg GAE/g dw and 90 ± 1 mg UA/g dw, respectively. Under appropriate conditions, the biological activities, phenolic content, and terpenoid content of obtained extracts from four extraction methods, including ultrasonic-assisted, microwave-assisted, ultrasonic-microwave-assisted, and microwave-ultrasonic-assisted extraction, were compared to select the most proper method. The conditions of ultrasonic-microwave-assisted extraction were 40 mL/g liquid-to-solid ratio, 5 min sonication, and 1 min microwave irradiation to obtain the highest phenolic and terpenoid contents (27.07 ± 0.27 mg GAE/g dw and 111 ± 3 mg UA/g dw, respectively). Ultrasonic-microwave-assisted extraction showed the highest phenolic content, terpenoid content, and biological activities among the four extraction techniques. The changes in the surface morphology were determined using scanning electron microscopy. This study demonstrated that ultrasonic-microwave-assisted extraction was an effective and sustainable method in food and pharmaceutical industries for recovering phenolics and terpenoids from Abelmoschus sagittifolius (Kurz) Merr., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Bacterial cells possessing a certain zeta potential are immobilized by electrochemical deposition within conducting polymers such as poly(3,4-ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy). These conducting polymers serve as a biocompatible matrix for trapping bacteria on an indium-tin-oxide (ITO)-coated glass substrate. The biological functions of bacteria were not affected by the chemical structure and electrical conductivity of the matrix. The viability of the bacteria on the ITO glass was monitored by dark-field microscopy. The cell density of Escherichia coli increased logarithmically during incubation in nutrient broth medium, leading to definitive formation of a biofilm on PPy. The facultative E. coli anaerobe sustains metabolism under aerobic and anaerobic conditions, but proliferates more extensively in the presence of oxygen. The conducting PPy film also facilitates electrochemical evaluation of the respiratory activity of bacterial cells and establishes that facultative anaerobic and aerobic bacteria exhibit similar respiratory activities under aerobic conditions.

In this study, electrochemical detection of viable bacterial cells was performed using a tetrazolium salt, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), which was converted to an insoluble and redox active formazan compound in viable microbial cells. The insolubility of this formazan was effectively exploited as a surface-confined redox event. An indium-tin-oxide electrode was applied to a microbial suspension that had been incubated with MTT and was heated to dry for the extraction and adsorption of formazan. Drying led to the appearance of a distinctive voltammetric oxidation peak at +0.1 V vs Ag|AgCl, the magnitude of which was successfully correlated to the number of viable microbes in the suspension. Thus, the electrochemical detection of formazan was effectively coupled with the thermal lysis of microbes. It is also noteworthy that this lysis-adsorption technique was highly selective to the hydrophobic formazan molecule due to the removal of hydrophilic cell components during equilibration in a phosphate buffer before voltammetric measurement. This technique was capable of detecting microbes above 2.8 × 10 1 CFU mL -1 and required only a 1 h incubation. The results of this study indicate that the sensitivity of the present technique is up to 10 000-fold higher than that of MTT colorimetry. The higher sensitivity was mainly ascribed to the concentration of the microbially produced formazan on the electrode by thorough desiccation of the bacterial suspension.

Real-time evaluation of bacterial viability is important for various purposes such as hygiene management, development of antibacterial agents, and effective utilization of bacterial resources. Here, we demonstrate a simple procedure for evaluating bacterial viability using gold nanoparticles (Au NPs). The color of bacterial suspensions containing Au NPs strongly depended on the bacterial viability. We found that the dispersion state of Au NPs affected the color of the suspension, based on the interaction of Au NPs with substances secreted by the bacteria. This color change was easily recognized with the naked eye, and viability was accurately determined by measuring the absorbance at a specific wavelength. This method was applicable to various bacterial species, regardless of whether they were Gram-positive or Gram-negative.

Nanometer-sized composite particles, which consisted of gold nanoparticles encapsulated by an N-isopropylacrylamide copolymer, were successfully synthesized using a one-step process. Shape complementary cavities of the O157-antigen were formed on the composite utilizing temperature-dependent affinity changes of the copolymer. The composite bound to enterohemorrhagic Escherichia coli (E. coli) O157 at 298 K and enhanced light-scattering intensity of the cell due to the optical properties of the gold nanoparticles. Moreover, the composite showed excellent selectivity (>15) against other types of E. coli such as O26 and O Rough. Recognition of the O157-antigen ceased upon heating to 313 K but was restored upon cooling to 298 K. During repeated temperature cycling around the phase transition temperature of the copolymer (305 K), the composite reproducibly showed recognition behavior at 298 K. The binding ability of the composite could be switched reversibly. Therefore, it was concluded that the molecular structure of the O157-antigen was memorized by the composite, rather than being molded into it. This technique is applicable not only for the detection of a target bacterium but also for an identification of new bacterial threats by the simple formation of the specific antigen-imprinted composite.

The 3-aminoquinzolinediones represent a new series of antibacterial agents structurally related to the fluoroquinolones. They are inhibitors of bacterial gyrase and topoisomerase IV and demonstrate clinically useful antibacterial activity against fastidious Gram-negative and Gram-positive organisms, including multidrug- and fluoroquinolone-resistant organisms. These agents also demonstrate in vivo efficacy in murine systemic infection models.