Search

Chemodynamic therapy (CDT), deemed as a cutting-edge antineoplastic therapeutic tactics, efficaciously suppresses tumors via catalytically yielding hydroxyl radicals ( • OH) in tumor regions. Nevertheless, its biomedical applications are often restricted by the limited hydrogen peroxide (H 2 O 2 ) level and upregulated antioxidant defense. Herein, a versatile nanoreactor is elaborately designed via integrating Cu 2- x S and MnO 2 for T 1 -weighted magnetic resonance (MR) imaging-guided CDT, synergistically enhanced through hypothermal ablation and oxidation resistance reduction, thereby displaying splendid antitumor efficiency as well as suppression on pulmonary metastasis. The as-synthesized Cu 2- x S@MnO 2 nanoreactors afford acid-dependent Cu-based and glutathione (GSH)-activated Mn-based catalytic properties for bimodal CDT. Owing to excellent absorbance at the second near-infrared (NIR-II) window, the Cu 2- x S furnishes hypo-photo-thermal therapy (PTT) against tumor growth and ameliorates the catalytic performance for thermal-enhanced CDT. Additionally, MnO 2 significantly downregulates GSH and glutathione peroxidase 4, which synergistically boosts CDT via promoting oxidative stress, simultaneously generating Mn 2+ for MR contrast improvement and activatable tumor imaging. Therefore, this study proffers a new attempt centered on the collaborative strategy integrating NIR-II hypothermal PTT and synergistically enhanced CDT for tumor eradication.

Growing evidence across organisms points to altered energy metabolism as an adverse outcome of metal oxide nanomaterial toxicity, with a mechanism of toxicity potentially related to the redox chemistry of processes involved in energy production. Despite this evidence, the significance of this mechanism has gone unrecognized in nanotoxicology due to the field's focus on oxidative stress as a universal─but nonspecific─nanotoxicity mechanism. To further explore metabolic impacts, we determined lithium cobalt oxide's (LCO's) effects on these pathways in the model organism Daphnia magna through global gene-expression analysis using RNA-Seq and untargeted metabolomics by direct-injection mass spectrometry. Our results show that a sublethal 1 mg/L 48 h exposure of D. magna to LCO nanosheets causes significant impacts on metabolic pathways versus untreated controls, while exposure to ions released over 48 h does not. Specifically, transcriptomic analysis using DAVID indicated significant enrichment (Benjamini-adjusted p ≤0.0.5) in LCO-exposed animals for changes in pathways involved in the cellular response to starvation (25 genes), mitochondrial function (70 genes), ATP-binding (70 genes), oxidative phosphorylation (53 genes), NADH dehydrogenase activity (12 genes), and protein biosynthesis (40 genes). Metabolomic analysis using MetaboAnalyst indicated significant enrichment (γ-adjusted p <0.1) for changes in amino acid metabolism (19 metabolites) and starch, sucrose, and galactose metabolism (7 metabolites). Overlap of significantly impacted pathways by RNA-Seq and metabolomics suggests amino acid breakdown and increased sugar import for energy production. Results indicate that LCO-exposed Daphnia respond to energy starvation by altering metabolic pathways, both at the gene expression and metabolite levels. These results support altered energy production as a sensitive nanotoxicity adverse outcome for LCO exposure and suggest negative impacts on energy metabolism as an important avenue for future studies of nanotoxicity, including for other biological systems and for metal oxide nanomaterials more broadly.

Local surface plasmon resonance (LSPR)-enhanced catalysis has brought a substantial amount of opportunities across various disciplines such as photocatalysis, photodetection, and photothermal therapeutics. Plasmon-induced photothermal and hot carriers effects have also been utilized to activate the enzyme-like reactions. Compared with natural enzymes, the relatively low catalytic performance of nanozymes severely hampered the potential applications in the field of biomedicine. For these issues mentioned above, herein, we demonstrate a highly efficient sulfite oxidase (SuO x ) mimetic performance of plasmonic monolayer MoO x (ML-MoO x ) upon LSPR excitation. We also established that the considerable photothermal effect and the injection of hot carriers induced by LSPR are responsible for promoting the SuO x activity of ML-MoO x . The high transient local temperature on the surface of ML-MoO x generated by the photothermal effect facilitates to impact the reaction velocity and feed the SuO x -like activity, while the generation of hot carriers which are suggested as predominant effects catalyzes the oxidation of sulfite to sulfate through significantly decreasing the activation energy for the SuO x -like reaction. These investigations present a contribution to the basic understanding of plasmon-enhanced enzyme-like reaction and provided an insight into the optimization of the SuO x mimetic performance of nanomaterials.

Mass cytometry (MC) is a bioanalytical technique that uses metal-tagged antibodies (Abs) for high-dimensional single-cell immunoassays. Currently, this technology can measure over 40 parameters simultaneously on individual cells using metal-chelating polymer (MCP) based reagents. However, MC can in principle detect up to 135 parameters with the development of new elemental mass tags. Here we report the development of a tantalum oxide nanoparticle (NP)-based mass tag for MC immunoassays. Uniform-sized amine-functionalized tantalum oxide NPs ( d ∼ 5.7 nm) were synthesized via a one-pot two-step reverse microemulsion method. These amine-functionalized NPs were further modified with azide groups by reacting with azide-PEG 2 k succinimidyl carboxymethyl ester (NHS-PEG 2 k -N 3 ) cross-linkers. The Ab-NP conjugates were prepared by reacting azide-functionalized NPs with dibenzocyclooctyne (DBCO)-functionalized primary or secondary Abs (DBCO-Ab) followed by fast protein size exclusion liquid chromatography (FPLC) purification. Three Ab-NP conjugates (TaO 2 -PEG 2 k -goat antimouse, TaO 2 -PEG 2 k -CD25, TaO 2 -PEG 2 k -CD196) were fabricated and tested in MC immunoassays. For the TaO 2 -PEG 2 k -goat antimouse conjugate, we showed that it can effectively detect abundant CD20 biomarkers on Ramos cells. For TaO 2 -PEG 2 k -CD25 and TaO 2 -PEG 2 k -CD196 conjugates, we demonstrated that these Ab-NP conjugates could be integrated into the commercial Ab staining panels for high-dimensional single-cell immune profiling of human peripheral blood mononuclear cells.

Colorimetric assays have drawn increasing research interest with respect to the quantitative detection of hydrogen peroxide (H 2 O 2 ) based on artificial enzymes because of their advantages with respect to natural enzymes, including design flexibility, low cost, and high stability. Regardless, the majority of the artificial enzymes exhibit low affinity to H 2 O 2 with large Michaelis-Menten constants ( K m ). This indicates that the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to blue-colored oxTMB requires a high H 2 O 2 concentration, hindering the sensitivity of the colorimetric assay. To address this problem, novel reduced Co 3 O 4 nanoparticles (R-Co 3 O 4 ) have been synthesized in this study via a step-by-step procedure using ZIF-67 as the precursor. R-Co 3 O 4 exhibits a considerably enhanced peroxidase-like activity when compared with that exhibited by pristine Co 3 O 4 (P-Co 3 O 4 ). The catalytic process in the case of R-Co 3 O 4 occurs in accordance with the typical Michaelis-Menten equation, and the affinity of R-Co 3 O 4 to H 2 O 2 is apparently higher than that of P-Co 3 O 4 . Furthermore, the density functional theory calculations revealed that the introduction of oxygen vacancies to R-Co 3 O 4 enhances its H 2 O 2 adsorption ability and facilitates the decomposition of H 2 O 2 to produce ·OH radicals, resulting in improved peroxidase-like activity. A simple and convenient colorimetric assay has been established based on the excellent peroxidase-like activity of R-Co 3 O 4 for detecting H 2 O 2 in concentrations of 1-30 μM with a detection limit of 4.3 × 10 -7 mol/L (S/N = 3). Furthermore, the R-Co 3 O 4 -based colorimetric method was successfully applied to glucose detection in human serum samples, demonstrating its potential for application in complex biological systems.

Hybrid, e.g., organic inorganic, perovskites from the type methylammonium lead iodide CH 3 NH 3 PbI 3 are promising solar cell materials. However, due to the large parameter space spanned by the manifold combinations of divalent metals with organic cations and anions, an efficient approach is needed to rapidly test and categorize new promising materials. Herein, we developed a high throughput approach for the automated synthesis of perovskite layers with different precursor ratios at varying annealing temperatures. The layers were analyzed by optical absorption and photoluminescence (PL) spectroscopy as well as X-ray diffraction (XRD) and evaluated using two different procedures. The first one is a stepwise exclusion of nonperforming reactant ratios and synthesis conditions by using both spectroscopic techniques, followed by a final validation of the procedure by XRD. In the second procedure, only PL results were consulted in combination with high throughput screening using design of experiments (DoE) to reduce the total number of experiments needed and compared to the manual cascade approach. Noteworthy, by simple PL screening, it was possible to identify the best ratio of perovskite to byproducts and annealing temperature. Thus, only with PL, more detailed results as with the manual protocol were reached, while at the same time the effort for characterization was significantly reduced (by 60% of the experimental time). In conclusion, our approach opens a way toward fast and efficient identification of new promising materials under different reaction and process conditions.

Antibacterial agents are an important tool in the prevention of bacterial infections. Inorganic materials are attractive due to their high stability under a variety of conditions compared to organic antibacterial agents. Herein tungsten oxide nanodots (WO 3-x ), synthesized by a simple one-pot synthetic approach, were found to exhibit strong antibacterial capabilities. The analyses with colony-forming units (CFU) showed an excellent antibacterial activity of WO 3-x against both Gram-negative Escherichia coli ( E. coli ) and Gram-positive Staphylococcus aureus ( S. aureus ) strains. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images revealed clear damages to the bacterial cell membranes, which was further confirmed by molecular dynamics simulations. Additionally, exposure to simulated sunlight was found to further increase the germicidal activity of WO 3-x nanodots, a 30 min exposure to sunlight combined with 50 μg/mL WO 3-x nanodots showed a 70% decrease in E. coli viability compared to without exposure. Electron spin resonance spectroscopy (ESR) was used to elucidate the underlying mechanism of this photocatalytic activity through the generation of hydroxyl radical species. The cell counting kit-8 (CCK-8) and the live/dead assay were further employed to evaluate the cytotoxicity of WO 3-x nanodots on eukaryotic cells, which demonstrated their general biocompatibility. In summary, our results suggest WO 3-x nanodots have considerable potential in antibacterial applications, while also being biocompatible at large.

Black titanium oxide has attracted tremendous interest in tumor phototherapy via converting light energy to heat and reactive oxygen species (ROS). Nevertheless, current synthesis methods suffer from inert gas shielding, high costs, complicated procedures, and expensive facilities, which are fairly impractical for treatment application. Herein, we propose a one-step strategy for fast facile synthesis of black TiO nanoparticles via a microwave-assisted hydrothermal synthesis approach with Ti power, hydrochloric acid, and hydrofluoric acid without the requirement of an reducing agent and high-temperature calcination. The prepared black TiO nanoparticles with an average size of 52 nm exhibit strong absorbance from ultraviolet (UV) to near-infrared light region, favoring a single agent and single light-induced synergistic phototherapy of tumors. The black TiO nanoparticles shows an excellent performance in phototherapy with a photothermal conversion efficiency up to 50% and a prominent ROS generation under 808 nm laser irradiation. The toxicity and therapeutic effect in vitro and in vivo are investigated, and the results elucidate that black TiO nanoparticles possess good biocompatibility and remarkable synergistic tumor therapeutic efficacy. The proposed microwave-assisted method opens up a novel way for the synthesis of titanium-based material in a simple and fast manner, promoting their applications in the biomedical field.

Integration of biological macromolecules with inorganic materials via biomineralization has demonstrated great potential for development of nanotheranostic agents. To produce multifunctionality, integration of multiple components in the biomineralized theranostic agents is required; however, how to efficiently and reproducibly implement this is challenging. In this report, a universal biomineralization strategy is developed by incorporation of oxidization polymerization into albumin-templated biomineralization for facile synthesis of nanotheranostic agents. A series of biomineralized polymers and manganese dioxide hybrid nanoparticles (PMHNs) can be synthesized via the polymerization of various monomers, including dopamine (DA), epigallocatechin (EGC), pyrrole (PY), and diaminopyridine (DP), along with the reduction of KMnO 4 and formation of manganese dioxide nanoparticles in albumin templates. These biomineralized PMHNs demonstrate ultrahigh MRI (longitudinal relaxivity up to 38 mM -1 s -1 ) and ultrasonic (US) imaging contrasting capabilities and have excellent photothermal therapy efficacy with complete ablation of orthotopic tumors. Moreover, these biomineralized hybrid nanoparticles can be effectively excreted through the kidneys, avoiding potential systemic toxicity. Thus, integration of polymerization into biomineralization presents a strategy for the fabrication of hybrid nanomaterials, allowing the production of multifunctional and biocompatible nanotheranostic agents via a facile one-pot method.

Molecular nanodevices are computational assemblers that switch defined states upon external stimulation. However, interfacing artificial nanodevices with natural molecular machineries in living cells remains a great challenge. Here, we delineate a generic method for programming assembly of enzyme-initiated DNAzyme nanodevices (DzNanos). Two programs including split assembly of two partzymes and toehold exchange displacement assembly of one intact DNAzyme initiated by telomerase are computed. The intact one obtains higher assembly yield and catalytic performance ascribed to proper conformation folding and active misplaced assembly. By employing MnO 2 nanosheets as both DNA carriers and source of Mn 2+ as DNAzyme cofactor, we find that this DzNano is well assembled via a series of conformational states in living cells and operates autonomously with sustained cleavage activity. Other enzymes can also induce corresponding DzNano assembly with defined programming modules. These DzNanos not only can monitor enzyme catalysis in situ but also will enable the implementation of cellular stages, behaviors, and pathways for basic science, diagnostic, and therapeutic applications as genetic circuits.

Foodborne pathogens like Listeria monocytogenes can cause various illnesses and pose a serious threat to public health. They produce species-specific microbial volatile organic compounds, i.e., the biomarkers, making it possible to indirectly measure microbial contamination in foodstuff. Herein, highly ordered mesoporous tungsten oxides with high surface areas and tunable pores have been synthesized and used as sensing materials to achieve an exceptionally sensitive and selective detection of trace Listeria monocytogenes. The mesoporous WO 3 -based chemiresistive sensors exhibit a rapid response, superior sensitivity, and highly selective detection of 3-hydroxy-2-butanone. The chemical mechanism study reveals that acetic acid is the main product generated by the surface catalytic reaction of the biomarker molecule over mesoporous WO 3 . Furthermore, by using the mesoporous WO 3 -based sensors, a rapid bacteria detection was achieved, with a high sensitivity, a linear relationship in a broad range, and a high specificity for Listeria monocytogenes. Such a good gas sensing performance foresees the great potential application of mesoporous WO 3 -based sensors for fast and effective detection of microbial contamination for the safety of food, water safety and public health.

We designed and synthesized the molecular framework of 3,5-disubstituted isoxazoles containing privileged substructures with various substituents which uniquely display polar surface area in a diverse manner. A library of 3,5-disubstituted isoxazoles were systematically prepared via 1,3-dipolar cycloaddition of alkynes with nitrile oxides prepared by two complementary synthetic routes; method A utilized a halogenating agent with a base and method B utilized a hypervalent iodine reagent. Through the biological evaluation of corresponding isoxazoles via three independent phenotypic assays, the different pattern of biological activities was shown according to the type of privileged substructure and substituent. These results demonstrated the significance of molecular design via introducing privileged substructures and various substituents to make a diverse arrangement of polar surface area within a similar 3-dimensional molecular framework.

Synthesis of 2,3-dihydrobenzo[f][1,2,5]thiadiazepin-4(5H)-one 1,1-dioxides from polymer-supported α-amino acids is described herein. Different α-amino acids immobilized on Wang resin were sulfonylated with various 2-nitrobenzenesulfonyl chlorides. The resulting 2-nitrobenzenesulfonamides were alkylated with alcohols according to the Fukuyama-Mitsunobu procedure. After reduction of the nitro group and cleavage from the polymer support, the final intermediates were reacted with thionyl chloride, and target compounds of good crude purity and acceptable overall yields were obtained. The chiral HPLC studies revealed the impact of the cyclization step on the resulting stereochemistry. The developed strategy allows for simple production of desired compounds with the application of parallel/combinatorial solid-phase synthesis using commercially available building blocks.

Ascorbic acid (AA) serves as a key coenzyme in many metabolic pathways, and its abnormal level is found to be associated with several diseases. Therefore, monitoring AA level in living systems is of great biomedical significance. In comparison with one-photon excited fluorescent probes, two-photon (TP) excited probes are more suitable for bioimaging, as they could afford higher imaging resolution with deeper imaging depth. Here, we report for the first time an efficient TP fluorescence probe for turn-on detection and imaging of AA in living cells and tissues. In this nanosystem, the negatively charged two-photon nanoparticles (TPNPs), which were prepared by modifying the silica nanoparticles with a two-photon dye, could adsorb cobalt oxyhydroxide (CoOOH) nanoflakes which carried positive charge by electrostatic force, leading to a remarkable decrease in their fluorescence intensity. However, the introduction of AA could induce the fluorescence recovery of the nanoprobe because it could reduce CoOOH into Co(2+) and result in the destruction of the CoOOH nanoflakes. The nanosystem exhibits a high sensitivity toward AA, with a LOD of 170 nM observed. It also shows high selectivity toward AA over common potential interfering species. The nanoprobe possessed both the advantages of TP imaging and excellent membrane-permeability and good biocompatibility of the silica nanoparticles and was successfully applied in TP-excited imaging of AA in living cells and tissues.

A series of hetero-bimetallic transition metal-substituted polyoxometalates (TMSPs) were synthesized based on the Co(II)-centered ligand [Co(II)W11O39](10-). The eight complex series, [Co(II)(M(x)OHy)W11O39]((12-x-y)-) (M(x)OHy = V(IV)O, Cr(III)(OH2), Mn(II)(OH2), Fe(III)(OH2), Co(II)(OH2), Ni(II)(OH2), Cu(II)(OH2), Zn(II)(OH2)), of which six are reported for the first time, was synthesized starting from [Co(III)W11O39](9-) and studied using spectroscopic, electrochemical, and computational techniques to evaluate the influence of substituted transition metals on the photodynamics of the metal-to-polyoxometalate charge transfer (MPCT) transition. The bimetallic complexes all show higher visible light absorption than the plenary [Co(II)W12O40](6-) and demonstrate the same MPCT transition as the plenary complex, but they have shorter excited-state lifetimes (sub-300 ps in aqueous media). The decreased lifetimes are rationalized on the basis of nonradiative relaxation due to coordinating aqua ligands, increased interaction with cations due to increased negative charge, and the energy gap law, with the strongest single factor appearing to be the charge on the anion. The most promising results are from the Cr- and Fe-substituted systems, which retain excited-state lifetimes at least 50% of that of [Co(II)W12O40](6-) while more than tripling the absorbance at 400 nm.

Bone regeneration and scaffold degradation do not usually follow the same rate, representing a daunting challenge in bone repair. Toward this end, we propose to use an external field such as light (in particular, a tissue-penetrating near-infrared light) to precisely monitor the degradation of the mineralized scaffold (demineralization) and the formation of apatite mineral (mineralization). Herein, CaTiO3:Yb(3+),Er(3+)@bioactive glass (CaTiO3:Yb(3+),Er(3+)@BG) nanofibers with upconversion (UC) photoluminescence (PL) were synthesized. Such nanofibers are biocompatible and can emit green and red light under 980 nm excitation. The UC PL intensity is quenched during the bone-like apatite formation on the surface of the nanofibers in simulated body fluid; more mineral formation on the nanofibers induces more rapid optical quenching of the UC PL. Furthermore, the quenched UC PL can recover back to its original magnitude when the apatite on the nanofibers is degraded. Our work suggests that it is possible to optically monitor the apatite mineralization and demineralization on the surface of nanofibers used in bone repair.

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.

Nitrogen-doped graphene quantum dots (N-GQDs) are synthesized at low temperature as a new catalyst allowing electrochemical detection of 2,4,6-trinitrotoluene (TNT). N-GQDs are made by an oxidative ultrasonication of graphene oxide (GO) forming nanometer-sized species, which are then chemically reduced and nitrogen doped by reacting with hydrazine. The as-synthesized N-GQDs have an average diameter of ∼2.5 nm with an N/C atomic ratio of up to ∼6.4%. To detect TNT, TNT is first accumulated on N-GQDs modified glassy carbon (N-GQDs/GC) electrode by holding the electrode at a 0 V versus Ag/AgCl for 150 s in an aqueous TNT solution. Next, the N-GQDs/GC electrode with accumulated TNT is transferred to a fresh PBS solution (0.1 M, pH 7.0, without TNT), where the TNT reduction current at -0.36 V versus Ag/AgCl in a linear scan voltammogram (LSV) shows a linear response to TNT concentration in the aqueous solution from 1 to 400 ppb, with a correlation coefficient of 0.999, a detection limit of 0.2 ppb at a signal/noise (S/N) of 3, and a detection sensitivity of 363 ± 7 mA mM(-1) cm(-2). The detection limit of 0.2 ppb of TNT for this new method is much lower than 2 ppb set by the U.S. Environmental Protection Agency for drinking water. Therefore, N-GQDs allow an electrochemical method for assaying TNT in drinking water to determine if levels of TNT are safe or not.

An easily accessible polyoxomolybdate-calix[4]arene hybrid 1 has been synthesized and applied as a heterogeneous catalyst in the sulfoxidation of thioethers to sulfoxides and to sulfones under strictly stoichiometric amounts of 30% H2O2 in CH3CN as the solvent. This study represents the first promising example of successful employment of calixarenes-polyoxometalate (POM) hybrid materials in the area of catalytic oxidations.

In this paper, we propose a facile and efficient strategy for synthesizing mesoporous BaSnO3 with a surface area as large as 67 m(2)/g using a peroxo-precursor decomposition procedure. As far as we know, this is the largest surface area reported in literature for BaSnO3 materials and may have a potential to greatly promote the technological applications of this kind of functional material in the area of chemical sensors, NOx storage, and dye-sensitized solar cells. The structure evolution of the mesoporous BaSnO3 from the precursor was followed using a series of techniques. Infrared analysis indicates large amount of protons and peroxo ligands are contained in the peroxo-precursor. Although the crystal structure of the precursor appears cubic according to the analysis of X-ray diffraction data, Raman and Mössbauer spectroscopy results show that the Sn atom is offset from the center of [SnO6] octahedron. After calcination at different temperatures, the precursor gradually transforms into BaSnO3 by release of water and oxygen, and the distortion degree of [SnO6] octahedral decreases. However, a number of oxygen vacancies are generated in the calcined samples, which are further confirmed by the physical property measurement system, and they would lower the local symmetry to some content. The concentration of the oxygen vacancies reduces simultaneously as the calcination temperature increases, and their contributions to the total heat capacity of the sample are calculated based on theoretical analysis of heat capacity data in the temperature region below 10 K.

A rapid (1.5 h) one-step ball milling (BM) method was developed not only to modify commercial MnO2 via top-down approaches (BM0), but also to bottom-up synthesize MnO(x) by cogrinding of KMnO4 and MnC4H6O4 (BM1) or KMnO4 and MnSO4 (BM2). Catalysts activity on gaseous POPs removal was tested using hexachlorobenzene (HCBz) as surrogate. Catalytic performance decreases in the order of BM2 ≈ BM1 (T90% = 180-200 °C) > BM0 (260 °C) > CMO ≈ cryptomelane MnO2 (>300 °C). Both adsorption and destruction contribute to HCBz removal at 180 °C while destruction prevails at 200-300 °C. Mechanism studies show that destruction activity is lineally correlated with the amount of surface reactive oxygen species (Oads); stability is determined by the removal of surface chloride, which is associated with the mobility of bulk lattice oxygen (Olat); adsorption capacities are linearly correlated with surface area and pore structure. With the aid of extensive characterizations the excellent performance of BM prepared samples can be explained as (1) abundant surface vacancies enhance the generation of Oads; (2) massive bulk vacancies promote the mobility of bulk Olat; (3) large surface area and uniform pore size distribution facilitate the physisorption of HCBz.

A fast parallel screening method based on combinatorial chemistry (combichem) has been developed and applied in the screening tests of perovskite-based oxide (PBO) catalysts for NO oxidation to hit a promising PBO formulation for the oxidation of NO to NO2. This new method involves three consecutive steps: oxidation of NO to NO2 over a PBO catalyst, adsorption of NOx onto the PBO and K2O/Al2O3, and colorimetric assay of the NOx adsorbed thereon. The combichem experimental data have been used for determining the oxidation activity of NO over PBO catalysts as well as three critical parameters, such as the adsorption efficiency of K2O/Al2O3 for NO2 (α) and NO (β), and the time-average fraction of NO included in the NOx feed stream (ξ). The results demonstrated that the amounts of NO2 produced over PBO catalysts by the combichem method under transient conditions correlate well with those from a conventional packed-bed reactor under steady-state conditions. Among the PBO formulations examined, La0.5Ag0.5MnO3 has been identified as the best chemical formulation for oxidation of NO to NO2 by the present combichem method and also confirmed by the conventional packed-bed reactor tests. The superior efficiency of the combichem method for high-throughput catalyst screening test validated in this study is particularly suitable for saving the time and resources required in developing a new formulation of PBO catalyst whose chemical composition may have an enormous number of possible variations.

A combinatorial thin film material library from the molybdenum-tungsten refractory metals oxides system was prepared by thermal coevaporation, and its structural and morphological properties were investigated after a multiple step heat treatment. A mixture of crystalline and amorphous oxides and suboxides was obtained, as well as surface structuring caused by the enrichment of molybdenum oxides in large grains. It was found that the oxide phases and the surface morphology change as a function of the compositional gradient. Tests of the library antimicrobial activity against E. coli were performed and the antimicrobial activity was proven in some defined compositional ranges. A mechanism for explaining the observed activity is proposed, involving a collective contribution from (i) increased local acidity due to the enrichment in large grains of molybdenum oxides with different stoichiometry and (ii) the release of free radicals from the W18O49 phase under visible light.

A novel quadruple perovskite oxide CeCu3Fe4O12 has been synthesized under high-pressure and high-temperature conditions of 15 GPa and 1473 K. (57)Fe Mössbauer spectroscopy displays a charge disproportionation transition of 4Fe(3.5+) → 3Fe(3+) + Fe(5+) below ∼270 K, whereas hard X-ray photoemission and soft X-ray absorption spectroscopy measurements confirm that the Ce and Cu valences are retained at approximately +4 and +2, respectively, over the entire temperature range measured. Electron and X-ray diffraction studies reveal that the body-centered cubic symmetry (space group Im3̅, No. 204) is retained at temperatures as low as 100 K, indicating the absence of any types of charge-ordering in the charge-disproportionated CeCu3Fe4O12 phase. The magnetic susceptibility and neutron powder diffraction data illustrate that the antiferromagnetic ordering of Fe ions is predominant in the charge-disproportionated CeCu3Fe4O12 phase. These findings suggest that CeCu3Fe4O12 undergoes a new type of electronic phase in the ACu3Fe4O12 series and that the melting of the charge-ordering in CeCu3Fe4O12 is caused by the substantial decrease in the Fe valence and the resulting large deviation from the ideal abundance ratio of Fe(3+):Fe(5+) = 1:1 for rock-salt-type charge-ordering.

The permanganate-mediated oxidative cyclization of a series of 2-methylenehept-5-eneoates bearing different chiral auxiliaries was investigated, leading to the discovery of trans-2-tritylcyclohexanol (TTC) as a highly effective chiral controller for the formation of the 2,5-substituted THF diol product with high diastereoselectivity (dr ∼97:3). Chiral resolution of (±)-TTC, prepared in one step from cyclohexene oxide, afforded (-)-(1S,2R)-TTC (er >99:1), which was applied to the synthesis of (+)-trans-(2S,5S)-linalool oxide.

A novel and efficient copper-catalyzed decarboxylative cross-coupling of alkynyl acids for the stereoselective synthesis of E-alkenylphosphine oxides has been developed. In the presence of 10 mol % of CuCl without added ligand, base, and additive, various alkynyl acids reacted with H-phosphine oxides to afford E-alkenylphosphine oxides with operational simplicity, broad substrate scope, and the stereoselectivity for E-isomers.

The Rh(III)-catalyzed C-8 selective direct alkylation and alkynylation of quinoline N-oxides has been developed. The reactions proceeded highly efficiently at room temperature over a broad range of substrates with excellent regioselectivity and functional group tolerance. This development demonstrates the synthetic utility of the N-oxide directing group as a stepping stone for remote C-H functionalization of quinolines.

The solid-phase synthesis of trisubstituted 2,5-dihydrobenzo[f][1,2,5]thiadiazepine 1,1-dioxides is reported. Acyclic polymer-supported intermediates were prepared using commercially available building blocks: Fmoc-protected amino acids, 2-nitrobenzenesulfonyl chlorides, and bromoketones. The acyclic precursors underwent acid-mediated release from the resin and the cyclization was completed in solution.

A highly enantioselective rhodium-catalyzed arylation of cyclic diketimines with arylboronic acids was achieved under mild conditions by employing a simple, sulfinamide-based branched olefin ligand. This protocol provides an efficient access to valuable chiral tetrasubstituted 1,2,5-thiadiazoline 1,1-dioxides in high yields with excellent enantioselectivities of up to 99% ee.

A novel perovskite oxide, CaCu3Rh4O12, has been synthesized under high-pressure and high-temperature conditions (15 GPa and 1273 K). Rietveld refinement of synchrotron X-ray powder diffraction data indicates that this compound crystallizes in a cubic AA'3B4O12-type perovskite structure. Synchrotron X-ray absorption and photoemission spectroscopy measurements reveal that the Cu and Rh valences are nearly trivalent. The spectroscopic analysis based on calculations suggests that the appropriate ionic model of this compound is Ca(2+)Cu(∼2.8+)3Rh(∼3.4+)4O12, as opposed to the conventional Ca(2+)Cu(2+)3Rh(4+)4O12. The uncommon valence state of this compound is attributed to the relative energy levels of the Cu 3d and Rh 4d orbitals, in which the large crystal-field splitting energy of the Rh 4d orbitals is substantial.

In this study, a novel, simple, and eco-friendly enzymatic-reaction-based approach to produce reduced graphene oxide/polyaniline (rGO/PANI) composite material was proposed. Glucose oxidase (GOx) was used as an effective catalyst producing hydrogen peroxide, in the presence of glucose, for the oxidative polymerization of aniline under ambient conditions. The prepared rGO/PANI composite was dispersed in polysulfone (PSf), and the mixed membranes were prepared by the phase inversion polymerization method. The morphology of membranes was investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM), and contact angle (CA) techniques. The performance of membranes was studied in terms of salt rejection and pure water flux. The incorporation of rGO into the membrane matrix led to hydrophobic membrane surface with the enhanced macro-voids. On the contrary, the contact angle data revealed that the rGO/PANI-incorporated membrane surface is partly hydrophilic due to the PANI fibers in membrane, whereas SEM images showed the enhanced macro-voids. Membranes exhibited an improved salt rejection after rGO/PANI doping. The rGO/PANI-modified membrane loading exhibited a maximum of 82% NaCl rejection at an applied pressure of 10 bar. In addition, the results showed that the PSf-rGO/PANI composite membrane had the highest mean porosity and water flux.

The trianion Z(3-) obtained from 9-phenyl 2,3,7-trihydroxyfluor-6-one, ZH3, affords dioxomolybdenum and dioxotungsten derivatives which contain [4 + 4] metallocycles of composition [(MO2)4Z4](4-) (M = Mo, W) in combination with a variety of counter cations. The syntheses, structures and ESMS of the following compounds are presented: compound 1, (MePPh3)3(NBu4)[(MoO2)4Z4]; compound 2, (MePPh3)3(NBu4)[(WO2)4Z4]; compound 3, (MePPh3)4[(WO2)4Z4]; compound 4, (PPh4)2(NBu4)2[(MoO2)4Z4]; compound 5, (AsPh4)3(NBu4)[(MoO2)4Z4]; compound 6, (AsPh4)2(NBu4)2[(WO2)4Z4]; compound 7, (Ph3PNPPh3)(NBu4)3[(MoO2)4Z4]; compound 8, (Ph3PNPPh3)(NBu4)3[(WO2)4Z4]; compound 9, (NEt4)(NBu4)3[(MoO2)4Z4]. The metallocycles in all of these compounds have similar structures, with the four metal centers located at the corners of a square slightly distorted, to varying degrees, toward a rhombus and also toward a tetrahedron. Various cations are bound inside the anionic metallocycles. ESI mass spectrometry shows that the metallocycles remain intact in the gas phase, forming [(MO2)4Z4](4-), {X-[(MO2)4Z4]}(3-) and in some cases {X2-[(MO2)4Z4]}(2-) where X(+) is an organic cation.

A novel approach to prepare diarylmethyl phosphine oxides from benzyl phosphine oxides via deprotonative cross-coupling processes (DCCP) is reported. The optimization of the reaction was guided by High-Throughput Experimentation (HTE) techniques. The Pd(OAc)2/Xantphos-based catalyst enabled the reaction between benzyl diphenyl or dicyclohexyl phosphine oxide derivatives and aryl bromides in good to excellent yields (51-91%).

New stereocontrolled total syntheses of (±)-fawcettimine, (±)-lycoflexine, and (±)-lycoflexine N-oxide have been accomplished. The highlights include a one-pot annulation to construct the enedione and a microwave-promoted Diels-Alder reaction.

A Ag-mediated C-H/P-H functionalization reaction of arylphosphine oxides with internal alkynes was described for the direct preparation of benzo[b]phosphole oxides with a high yield. An unusual aryl migration on the P-atom derived from a C-P bond cleavage and a new C-P bond formation was also observed and demonstrated to proceed via the radical process.

Self-assembled WO3 thin film nanostructures with 1-dimensional villi-like nanofingers (VLNF) have been synthesized on the SiO2/Si substrate with Pt interdigitated electrodes using glancing angle deposition (GAD). Room-temperature deposition of WO3 by GAD resulted in anisotropic nanostructures with large aspect ratio and porosity having a relative surface area, which is about 32 times larger than that of a plain WO3 film. A WO3 VLNF sensor shows extremely high response to nitric oxide (NO) at 200 °C in 80% of relative humidity atmosphere, while responses of the sensor to ethanol, acetone, ammonia, and carbon monoxide are negligible. Such high sensitivity and selectivity to NO are attributed to the highly efficient modualtion of potential barriers at narrow necks between individual WO3 VLNF and the intrinsically high sensitivity of WO3 to NO. The theoretical detection limit of the sensor for NO is expected to be as low as 88 parts per trillion (ppt). Since NO is an approved biomarker of chronic airway inflammation in asthma, unprecedentedly high response and selectivity, and ppt-level detection limit to NO under highly humid environment demonstrate the great potential of the WO3 VLNF for use in high performance breath analyzers.

Silver has been utilized as a highly effective and broad-spectrum antibacterial agent in our daily life. However, low stability, poor long-term antibacterial efficiency, and potential environmental hazard of released Ag(+) ions may limit its practical applications. Ag-graphene oxide (GO) nanocomposites have been reported to display highly enhanced antibacterial property, yet their stability and long-term antibacterial properties have not been carefully investigated. Herein, we report the synthesis of Ag@Fe2O3-GO nanocomposites with tunable loading density up to full monolayer coverage by adopting a simple phase transfer method. Compared to Ag@Fe2O3, its GO composite shows enhanced stability with Ag(+) releasing rate decreased by more than two times under dialysis condition. We discover that the presence of GO not only slows down Ag nanoparticle oxidation process but also enables Ag(+) ions recrystallization on GO surface. The Ag@Fe2O3-GO nanocomposites have shown better and long-term antibacterial property against both Gram-negative and Gram-positive bacteria than those of plain Ag and Ag@Fe2O3, displaying great potential as a promising long-term bactericide with suppressed environmental hazard.

A series of end-to-end azido-bridged perovskite-type compounds [(CH3)nNH4-n][Mn(N3)3] (n = 1-4) were synthesized and characterized. Structural phase transitions indicating the general lattice flexibility were observed and confirmed by the crystal structures of different phases. These materials show cation-dependent magnetic ordering at up to 92 K and magnetic bistability near room temperature.

Iodine pentoxide (I2O5), also known as diiodine pentoxide, is a strong oxidizer which has been recently proposed as an iodine-rich oxidizer in nanoenergetic formulations, whose combustion products lead to molecular iodine as a biocidal agent. However, its highly hygroscopic nature hinders its performance as a strong oxidizer and an iodine releasing agent and prevents its implementation. In this work, we developed a gas phase assisted aerosol spray pyrolysis which enables creation of iron oxide passivated I2O5. Transmission electron microscopy elemental imaging as well as temperature-jump mass spectrometry confirmed the core shell nature of the material and the fact that I2O5 could be encapsulated in pure unhydrated form. Combustion performance finds an optimal coating thickness that enables combustion performance similar to a high performing CuO based thermite.

Niobates CaRNb3O10 (R = La, Sm, Eu, Gd, Dy, Er, Yb, or Y) were prepared by conventional high-temperature solid-state reaction. The formation of a single-phase compound with triple-layered perovskite-type structure was verified through X-ray diffraction (XRD) studies. The luminescence characteristics such as photoluminescence excitation and emission spectra, X-ray-excited luminescence (XEL), Stokes shift, decay curves, and color coordinates were investigated. The niobates can be efficiently excited by UV light and present luminescence behaviors with rich luminescence colors. Under excitation by ultraviolet radiation, CaRNb3O10 (R = La, Gd, Yb, or Y) exhibits strong blue luminescence due to the self-activation center of the octahedral NbO6 groups, even at room temperature. For the materials of composition CaRNb3O10 (R = Sm, Eu, Dy, or Er), the excitation at the host band produces a characteristic luminescence of rare earth ions, indicating a host-guest energy transfer process. CaRNb3O10 (R = Eu) has the strongest luminescence intensity, which can be efficiently excitated by near UV wavelength. It could be suggested to be a potential candidate for the application on near-UV excited white LEDs.

Direct ortho-substitution took place efficiently upon treatment of tri-, di-, and monoarylphosphine oxides with internal alkynes in the presence of a ruthenium catalyst to produce (o-alkenylphenyl)phosphine oxides regio- and stereoselectively. Chemoselective reduction of a product gave the corresponding (o-alkenylphenyl)phosphine, which may be useful as a ligand for transition metals.

Nanoparticles (NPs) and colloidal nanocrystal clusters (CNCs) of ZnFe2O4 were synthesized by using a solvothermal method in a controlled manner through simply adjusting the solvents. When a glycerol/water mixture was used as the solvent, ZnFe2O4 NPs were obtained. However, using ethylene glycol solvent yielded well-dispersed ZnFe2O4 CNCs. X-ray diffraction (XRD) and transmission electron microscopy (TEM) data confirmed that the ZnFe2O4 NPs were a single crystalline phase with tunable sizes ranging from 12 to 20 nm, while the ZnFe2O4 CNCs of submicrometer size consisted of single-crystalline nanosheets. Magnetic measurement results showed that the ZnFe2O4 NPs were ferromagnetic with a very small hysteresis loop at room temperature. However, CNCs displayed a superparamagnetic behavior due to preferred orientations of the nanosheets. Electrochemical sensing properties showed that both the size of the NPs and the structure of the CNCs had a great influence on their electrochemical properties in the reduction of H2O2. Based on the experimental results, the formation mechanisms of both the ZnFe2O4 CNCs and NPs as well as their structure-property relationship were discussed.

With the exploding interest in transition metal chalcogenides, sulfide minerals containing the dianion S2(2-), such as pyrite (FeS2), cattierite (CoS2), and vaesite (NiS2), have recently attracted much attention for potential applications in energy conversion and storage devices. However, the synthesis of the patronite structure (VS4, V(4+)(S2(2-))2) and its applications have not yet been clearly demonstrated because of experimental difficulties and the existence of nonstoichiometric phases. Herein, we report the synthesis of VS4 using a simple, facile hydrothermal method with a graphene oxide (GO) template and the characterization of the resulting material. Tests of various templates such as CNT, pyrene, perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA), and graphite led us to the conclusion that the graphitic layer plays a role in the nucleation during growth of VS4. Furthermore, the VS4/rGO hybrid was proved to be a promising functional material in energy storage devices.

We describe the redox functionalization of graphene oxide (GO) and the development of versatile amperometric biosensing platforms for clinically important analytes such as cholesterol ester, uric acid and glucose. Ferrocene (Fc) redox units were covalently tethered onto the GO backbone using diamine sigma spacers of different chain lengths (C3-, C6-, and C9-diamines). The functionalized GO (Fc-GO) displays a pair of redox peak corresponding to Fc/Fc(+) redox couple at ~0.225 V. The surface coverage and heterogeneous electron transfer rate constant of Fc-GO depends on the length of sigma spacer. Amperometric biosensors for cholesterol (total), uric acid and glucose have been developed by integrating Fc-GO and the respective redox enzymes with screen printed electrode. Fc-GO efficiently mediates the bioelectrocatalytic oxidation of the substrates in the presence of the redox enzymes. The spacer length of Fc-GO controls the bioelectrocatalytic response of the biosensing platforms. The sensitivity of the biosensors based on C9 sigma spacer is significantly higher than the others. The detection limit (S/N = 3) of the biosensors for cholesterol and uric acid was 0.1 μM and for glucose it was 1 μM. Excellent stability, reproducibility, selectivity and fast response time were achieved. Biosensing of cholesterol, uric acid and glucose in human serum sample is successfully demonstrated with the biosensors, and the results are validated with the clinical laboratory measurement.

Reduced graphene oxide (RGO) and silver nanoparticle (AgNP) hybrids (RGO-AgNP) were prepared by a facile one-pot method using Poly (N-vinyl-2-pyrrolidone) as reductant and stabilizer. Folic acid (FA) molecules were attached to the RGO-AgNP by physisorption for targeting specific cancer cells with folate receptors (FRs) and using as Raman reporter molecules. The internalization of the FA loaded RGO-AgNP (RGO-AgNP-FA) inside the FRs-positive cancer cell was confirmed by confocal laser scanning and transmission electron microscopy. The Raman signals of the FA in live cancer cells were detected by confocal Raman spectroscope at 514 nm excitation, indicating that the RGO-AgNP-FA material has great potential as a Raman probe for cancer diagnosis in vitro.

A library of benzisoxazoles has been synthesized by the [3 + 2] cycloaddition of nitrile oxides with arynes and further diversified by acylation/sulfonylation and palladium-catalyzed coupling processes. The eight key intermediate benzisoxazoles have been prepared by the reaction of o-(trimethylsilyl)aryl triflates and chlorooximes in the presence of CsF in good to excellent yields under mild reaction conditions. These building blocks have been used as the key components of a diverse set of 3,5,6-trisubstituted benzisoxazoles.

A synthesis method was newly developed to prepare mesoporous transition metal oxides by thermal decomposition of transition metal oxalates, and the method was advantageous in its versatility, low cost, and environmental friendliness. Various mesoporous transition metal oxides were successfully synthesized by the newly developed method, such as magnetic γ-Fe2O3, CoFe2O4, and NiFe2O4, MnxOy, Co3O4, and NiO. Morphology, structure, and magnetic property of the synthesized mesoporous transition metal oxides were characterized by XRD, TG-DTA, SEM, TEM, quantum design SQUID, and N2 sorption techniques. From the dependency of the heating rate, calcination time, and calcination temperature on the metal oxide structures, it was revealed that the calcination temperature was the major factor to determine the final mesoporous structure of the metal oxides. The mesoporous structures were well constructed by their corresponding metal oxide nanoparticles resulting from oxalate thermal decomposition.

Phase behavior, dynamics, and structure of W/O microemulsions of the system aqueous solution/Synperonic 13&#95;6.5/1-hexanol/isooctane were studied, with the goal of determining their effect on Mn-Zn ferrite nanoparticle formation, kinetics and characteristics. Microemulsion structure and dynamics were studied systematically by conductivity, dynamic light scattering (DLS), differential scanning calorimetry (DSC), and small-angle neutron scattering (SANS). The main effect of cosurfactant 1-hexanol was a decrease in microemulsion regions as compared to the systems without cosurfactant; nevertheless, overlap of microemulsion regions in the systems with precursor salts (PS) and precipitating agent (PA) was achieved at lower S/O ratios, compared to the system without cosurfactant. At 50 °C, PA microemulsions are nonpercolated, while PS microemulsions are percolated. SANS indicates small prolate ellipsoidal micelles with the absence of free water up to 18 wt % PS solution; DSC studies confirm the absence of free water in this composition range. Kinetic studies show an increase in the reaction rate with increasing concentration of the aqueous solution; but the most significant effect in reaction kinetics was noted when cosurfactant was used, regardless of microemulsion dynamics and structure. On the other hand, the main difference regarding the characteristics of the obtained nanoparticles was observed when bicontinuous microemulsions were used as reaction media which resulted in 8 nm nanoparticles, versus a constant size of ~4 nm obtained with all other microemulsions regardless of aqueous solution content, dynamics, and presence or absence of cosurfactant. The latter effect of constant size is attributed to the fact that the water present is dominantly bound to the EO units of the surfactant.

Sterols (cholesterol and phytosterols) are important structural components of cell membranes and major constituents of lipid metabolism. Research on their oxides, such as the factors affecting oxidation, oxides' structures, and qualitative and quantitative analysis, aroused more attention in this decade. However, the biological roles of individual phytosterol oxides are still unclear because no commercial individual phytosterol oxide standards are available. Different from the traditional chemical synthesis, in the present study, chemical synthesis from a starting phytosterol mixture followed with a semipreparative HPLC separation produced individual oxides. TLC and analytical HPLC were used here to not only monitor the reaction process but also specifically analyze the synthetic intermediates and oxides. The chromatographic results exhibited strict rules and similar characteristics. Finally, for the first time, four individual phytosterol oxides were successfully separated and collected by a semipreparative HPLC system, thus providing a novel strategy for the preparation of individual phytosterol oxides.

We report the synthesis of KNbO(3) nanowires (NWs) with a monoclinic phase, a phase not observed in bulk KNbO(3) materials. The monoclinic NWs can be synthesized via a hydrothermal method using metallic Nb as a precursor. The NWs are metastable, and thermal treatment at ∼450 °C changed the monoclinic phase into the orthorhombic phase, which is the most stable phase of KNbO(3) at room temperature. Furthermore, we fabricated energy-harvesting nanogenerators by vertically aligning the NWs on SrTiO(3) substrates. The monoclinic NWs showed significantly better energy conversion characteristics than orthorhombic NWs. Moreover, the frequency-doubling efficiency of the monoclinic NWs was ∼3 times higher than that of orthorhombic NWs. This work may contribute to the synthesis of materials with new crystalline structures and hence improve the properties of the materials for various applications.