Search

Proteomics experiments based on Selected Reaction Monitoring (SRM, also referred to as Multiple Reaction Monitoring or MRM) are being used to target large numbers of protein candidates in complex mixtures. At present, instrument parameters are often optimized for each peptide, a time and resource intensive process. Large SRM experiments are greatly facilitated by having the ability to predict MS instrument parameters that work well with the broad diversity of peptides they target. For this reason, we investigated the impact of using simple linear equations to predict the collision energy (CE) on peptide signal intensity and compared it with the empirical optimization of the CE for each peptide and transition individually. Using optimized linear equations, the difference between predicted and empirically derived CE values was found to be an average gain of only 7.8% of total peak area. We also found that existing commonly used linear equations fall short of their potential, and should be recalculated for each charge state and when introducing new instrument platforms. We provide a fully automated pipeline for calculating these equations and individually optimizing CE of each transition on SRM instruments from Agilent, Applied Biosystems, Thermo-Scientific and Waters in the open source Skyline software tool (http://proteome.gs.washington.edu/software/skyline). 10.1021/ac102179j

The need for reliable, fast diagnostics is closely linked to the need for safe, effective treatment of the so-called 'neglected' diseases. The list of diseases with no field-adapted diagnostic tools includes leishmaniasis, shigella, typhoid, and bacterial meningitis. Leishmaniasis, in particular, is a parasitic disease caused by Leishmania spp. transmitted by infected phlebotomine sandfly, which remains a public health concern in developing countries with ca. 12 million people infected and 350 million at risk of infection. Despite several attempts, methods for diagnosis are still noneffective, especially with regard to specificity due to false positives with Chagas' disease caused by Trypanosema cruzi. Accepted golden standards for detecting leishmaniasis involve isolation of parasites either microscopically, or by culture, and in beth methods specimens are obtained by invasive means. Here, we show that efficient distinction between cutaneous leishmaniasis and Chagas' disease can be obtained with a low-cost biosenser system made with nanostructured films contraining specific Leishmania amazonensis and T. cruzi antigens and employing impedance spectroscopy as the detection method. This unprecedented selectivity was afforded by antigen-antibody molecular recognition processes inherent in the detection with the immobilized antigens, and by statistically correlating the electrical impedance data, which allowed distinction between real samples that tested positive for Chagas' disease and leishmaniasis. Distinction could be made of blood serum samples containing 10-5 mg/mL of the antibody solution in a few minutes. The methods used here are generic and can be extended to any type of biosensor, which is important for an effective diagnosis of many other diseases. 10.1021/ac101920t

Impedance spectroscopy has been proven a powerful tool for reaching high sensitivity in sensor arrays made with nanostructured films in the so-called electronic tongue systems, whose distinguishing ability may be enhanced with sensing units capable of molecular recognition. In this study we show that for optimized sensors and biosensors the dielectric relaxation processes involved in impedance measurements should also be considered, in addition to an adequate choice of sensing materials. We used sensing units made from layer-by-layer (LbL) films with alternating layers of the polyeletrolytes, poly(ally-lamine) hydrochloride (PAH) and poly(vinyl sulfonate) (PVS), or LbL films of PAH alternated with layers of the enzyme phytase, all adsorbed on gold interdigitate electrodes. Surprisingly, the detection of phytic acid was as effective in the PVS/PAH sensing system as with the PAH/ phytasc system, in spite of the specific interactions of the latter. This was attributed to the dependence of the relaxation processes on nonspecific interactions such as electrostatic cross-linking and possibly on the distinct film architecture as the phytase layers were found to grow as columns on the LbL film, in contrast to the molecularly thin PAH/PVS films. Using projection techniques, we were able to detect phytic acid at the micromolar level with either of the sensing units in a data analysis procedure that allows for further optimization. 10.1021/ac902949h

The integration of nanostructured films containing biomolecules and silicon-based technologies is a promising direction for reaching miniaturized biosensors that exhibit high sensitivity and selectivity. A challenge, however, is to avoid cross talk among sensing units in an array with multiple sensors located on a small area. In this letter, we describe an array of 16 sensing units of a light-addressable potentiometric sensor (LAPS), which was made with layer-by-layer (LbL) films of a poly(amidomine) dendrimer (PAMAM) and single-walled carbon nanotubes (SWNTs), coated with a layer of the enzyme penicillinase. A visual inspection of the data from constant-current measurements with liquid samples containing distinct concentrations of penicillin, glucose, or a buffer indicated a possible cross talk between units that contained penicillinase and those that did not. With the use of multidimensional data projection techniques, normally employed in information visualization methods, we managed to distinguish the results from the modified LAPS, even in cases where the units were adjacent to each other. Furthermore, the plots generated with the interactive document map (IDMAP) projection technique enabled the distinction of the different concentrations of penicillin, from 5 mmol [L.sup.-1] down to 0.5 mmol [L.sup.-1]. Data visualization also confirmed the enhanced performance of the sensing units containing carbon nanotubes, consistent with the analysis of results for LAPS sensors. The use of visual analytics, as with projection methods, may be essential to handle a large amount of data generated in multiple sensor arrays to achieve high performance in miniaturized systems. 10.1021/ac9024076

We describe an integrated suite of algorithms and software for general accurate mass and time (AMT) tagging data analysis of mass spectrometry data. The AMT approach combines identifications from liquid chromatography (LC) tandem mass spectrometry (MS/MS) data with peptide accurate mass and retention time locations from high-resolution LC-MS data. Our workflow includes the traditional AMT approach, in which MS/MS identifications are located in external databases, as well as methods based on more recent hybrid instruments such as the LTQ-FT or Orbitrap, where MS/MS identifications are embedded with the MS data. We demonstrate our AMT workflow's utility for general data synthesis by combining data from two dissimilar biospecimens. Specifically, we demonstrate its use relevant to serum biomarker discovery by identifying which peptides sequenced by MS/MS analysis of tumor tissue may also be present in the plasma of tumor-bearing and control mice. The analysis workflow, referred to as msInspect/AMT, extends and combines existing open-source platforms for LC-MS/MS (CPAS) and LC-MS (msInspect) data analysis and is available in an unrestricted open-source distribution.

Quantitative proteomic profiling using liquid chromatography-mass spectrometry is emerging as an important tool for biomarker discovery, prompting development of algorithms for high-throughput peptide feature detection in complex samples. However, neither annotated standard data sets nor quality control metrics currently exist for assessing the validity of feature detection algorithms. We propose a quality control metric, Mass Deviance, for assessing the accuracy of feature detection tools. Because the Mass Deviance metric is derived from the natural distribution of peptide masses, it is machine- and proteome-independent and enables assessment of feature detection tools in the absence of completely annotated data sets. We validate the use of Mass Deviance with a second, independent metric that is based on isotopic distributions, demonstrating that we can use Mass Deviance to identify aberrant features with high accuracy. We then demonstrate the use of independent metrics in tandem as a robust way to evaluate the performance of peptide feature detection algorithms. This work is done on complex LC-MS profiles of Saccharomyces cerevisiae which present a significant challenge to peptide feature detection algorithms.

The open-source Computational Proteomics Analysis System (CPAS) contains an entire data analysis and management pipeline for Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS) proteomics, including experiment annotation, protein database searching and sequence management, and mining LC-MS/MS peptide and protein identifications. CPAS architecture and features, such as a general experiment annotation component, installation software, and data security management, make it useful for collaborative projects across geographical locations and for proteomics laboratories without substantial computational support.