Search

The common techniques to study protein-protein proximity in vivo are not well adapted to the capabilities and the expertise of a standard proteomics laboratory, typically based on the use of mass spectrometry. With the aim of closing this gap, we have developed PUB-MS (for proximity utilizing biotinylation and mass spectrometry), an approach to monitor protein-protein proximity, based on biotinylation of a protein fused to a biotin-acceptor peptide (BAP) by a biotin-ligase, BirA, fused to its interaction partner. The biotinylation status of the BAP can be further detected by either Western analysis or mass spectrometry. The BAP sequence was redesigned for easy monitoring of the biotinylation status by LC-MS/MS. In several experimental models, we demonstrate that the biotinylation in vivo is specifically enhanced when the BAP- and BirA-fused proteins are in proximity to each other. The advantage of mass spectrometry is demonstrated by using BAPs with different sequences in a single experiment (allowing multiplex analysis) and by the use of stable isotopes. Finally, we show that our methodology can be also used to study a specific subfraction of a protein of interest that was in proximity with another protein at a predefined time before the analysis.

In this paper, we describe the development of an electrochemical DNA aptamer-based biosensor for detection of interferon (IFN)-γ. A DNA hairpin containing IFN-γ-binding aptamer was thiolated, conjugated with methylene blue (MB) redox tag, and immobilized on a gold electrode by self-assembly. Binding of IFN-γ caused the aptamer hairpin to unfold, pushing MB redox molecules away from the electrode and decreasing electron-transfer efficiency. The change in redox current was quantified using square wave voltammetry (SWV) and was found to be highly sensitive to IFN-γ concentration. The limit of detection for optimized biosensor was 0.06 nM with linear response extending to 10 nM. This aptasensor was specific to IFN-γ in the presence of overabundant serum proteins. Importantly, the same aptasensor could be regenerated by disrupting aptamer-IFN-γ complex in urea buffer and reused multiple times. Unlike standard sandwich immunoassays, the aptasensor described here allowed one to detect IFN-γ binding directly without the need for multiple washing steps and reagents. An electrochemical biosensor for simple and sensitive detection of IFN-γ demonstrated in this paper will have future applications in immunology, cancer research, and infectious disease monitoring.

Characterization of leukocytes is an integral part of blood analysis and blood-based diagnostics. In the present paper, we combine lensless holographic imaging with antibody microarrays for rapid and multiparametric analysis of leukocytes from human blood. Monoclonal antibodies (Abs) specific for leukocyte surface antigens (CD4 and CD8) and cytokines (TNF-alpha, IFN-gamma, IL-2) were printed in an array so as to juxtapose cell capture and cytokine detection antibody (Ab) spots. Integration of Ab microarrays into a microfluidic flow chamber (4 muL volume) followed by incubation with human blood resulted in capture of CD4 and CD8 T-cells on specific Ab spots. On-chip mitogenic activation of these cells induced release of cytokine molecules that were subsequently captured on neighboring anticytokine Ab spots. The binding of IL-2, TNF-alpha, and IFN-gamma molecules on their respective Ab spots was detected using horseradish peroxidase (HRP)-labeled anticytokine Abs and a visible color reagent. Lensfree holographic imaging was then used to rapidly ( approximately 4 s) enumerate CD4 and CD8 T-lymphocytes captured on Ab spots and to quantify the cytokine signal emanating from IL-2, TNF-alpha, and IFN-gamma spots on the same chip. To demonstrate the utility of our approach for infectious disease monitoring, blood samples of healthy volunteers and human immunodeficiency virus (HIV)-infected patients were analyzed to determine the CD4/CD8 ratio, an important HIV/AIDS diagnostic marker. The ratio obtained by lensfree on-chip imaging of CD4 and CD8 T-cells captured on Ab spots was in close agreement with conventional microscopy-based cell counting. The present paper, describing tandem use of Ab microarrays and lensfree holographic imaging, paves the way for future development of miniature cytometry devices for multiparametric blood analysis at the point of care or in a resource-limited setting.

Traditional antibody-based affinity sensing strategies employ multiple reagents and washing steps and are unsuitable for real-time detection of analyte binding. Aptamers, on the other hand, may be designed to monitor binding events directly, in real-time, without the need for secondary labels. The goal of the present study was to design an aptamer beacon for fluorescence resonance energy transfer (FRET)-based detection of interferon-gamma (IFN-gamma)--an important inflammatory cytokine. Variants of DNA aptamer modified with biotin moieties and spacers were immobilized on avidin-coated surfaces and characterized by surface plasmon resonance (SPR). The SPR studies showed that immobilization of aptamer via the 3' end resulted in the best binding IFN-gamma (K(d) = 3.44 nM). This optimal aptamer variant was then used to construct a beacon by hybridizing fluorophore-labeled aptamer with an antisense oligonucleotide strand carrying a quencher. SPR studies revealed that IFN-gamma binding with an aptamer beacon occurred within 15 min of analyte introduction--suggesting dynamic replacement of the quencher-complementary strand by IFN-gamma molecules. To further highlight biosensing applications, aptamer beacon molecules were immobilized inside microfluidic channels and challenged with varying concentration of analyte. Fluorescence microscopy revealed low fluorescence in the absence of analyte and high fluorescence after introduction of IFN-gamma. Importantly, unlike traditional antibody-based immunoassays, the signal was observed directly upon binding of analyte without the need for multiple washing steps. The surface immobilized aptamer beacon had a linear range from 5 to 100 nM and a lower limit of detection of 5 nM IFN-gamma. In conclusion, we designed a FRET-based aptamer beacon for monitoring of an inflammatory cytokine-IFN-gamma. In the future, this biosensing strategy will be employed to monitor dynamics of cytokine production by the immune cells.

The cytokine production by leukocytes correlates with body's ability to mount an immune response and therefore has high diagnostic value. In the present study we employed microfabricated surfaces to capture T-cells from minimally processed human blood, arrange these cells into a single cell array, and then detect interferon (IFN)-gamma released from individual cells. The fabrication of cell capture surfaces started with coating a silane-modified glass slide with a uniform layer of poly(ethylene glycol) (PEG) hydrogel. The hydrogel-coated slide was lyophilized and then incubated with a mixture of monoclonal anti-IFN-gamma and anti-CD4 antibodies (Abs). To define sites for single cell attachment, PEG hydrogel microwells (20 microm diameter) were photolithographically patterned on top of the Ab-containing hydrogel layer. This micropatterning process resulted in fabrication of PEG hydrogel microwells with Ab-decorated bottom and nonfouling walls. To minimize the blood volume requirement and to precisely define shear stress conditions, the engineered surface was enclosed inside a PDMS-based microfluidic device. Introduction of red blood cell (RBC) depleted whole human blood followed by controlled washing led to the isolation of individual CD4 T-cells within PEG microwells. Mitogenic activation and immunofluorescent staining performed inside the microfluidic chamber revealed IFN-gamma cytokine signal colocalized with specific T-cells. The device and process presented here will be expanded in the future to enable multiparametric functional analysis of immune cells organized into high density single cell arrays.

The microarray format is being used extensively for combinatorial screening of cellular interactions with proteins, small molecules, or biomaterials. The utility of microarray-based cell cultivation approaches may be enhanced further by incorporating biosensing elements alongside the cell-adhesive ligands to enable local detection of secreted cellular products. The concept of combining cells and sensing elements in the same microarray is demonstrated in the present paper with hepatocytes serving as a model cellular system. Robotic microarraying was employed to print arrays of 300-mum-diameter collagen (I) spots alongside the antibody (Ab) spots specific to liver proteins: albumin and alpha1-antitrypsin (alpha1-AT). Protein microarrays were printed onto poly(ethylene glycol) hydrogel-coated glass slides, thus eliminating nonspecific adsorption of cells or proteins. When incubated with printed microarrays, hepatocytes became localized on collagen (I) domains but did not attach on Ab spots or elsewhere on hydrogel-coated glass substrates. Liver-specific proteins secreted by hepatocytes were captured on Ab domains in the immediate vicinity of the cells, detected with a sandwich immunofluorescent assay and quantified using a microarray scanner. Importantly, hepatic albumin and alpha1-AT production detected in the microarray was comparable to enzyme-linked immunosorbent assay measurements of these proteins. In the future, the juxtaposition of sensing Ab regions with cell arrays will be particularly useful for the detection of local appearance or loss of phenotype of cells interacting with the printed components of the cellular microenvironment.

This paper describes a novel approach of controlling cell-surface interactions through an electrochemical "switching" of biointerfacial properties of optically transparent microelectrodes. The indium tin oxide (ITO) microelectrodes, fabricated on glass substrates, were modified with poly(ethylene glycol) (PEG) silane to make glass and ITO regions resistant to protein and cell adhesion. Cyclic voltammetry, with potassium ferricyanide serving as a redox reporter molecule, was used to monitor electron transfer across the electrolyte-ITO interface. PEG silane modification of ITO correlated with diminished electron transfer, judged by the disappearance of ferricyanide redox activity. Importantly, application of reductive potential (-1.4 V vs Ag/AgCl reference) corresponded with reappearance of typical ferricyanide redox peaks, thus pointing to desorption of an insulating PEG silane layer. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) characterization of the silanized ITO surfaces after electrical stimulation indicated complete removal of the silane layer. Significantly, electrical stimulation allowed to "switch" chosen electrodes from nonfouling to protein-adhesive while leaving other ITO and glass regions protected by a nonfouling PEG silane layer. The spatial and temporal control of biointerfacial properties afforded by our approach was utilized to micropattern proteins and cells and to construct micropatterned co-cultures. In the future, control of the biointerfacial properties afforded by this novel approach may allow the organization of multiple cell types into precise geometric configurations in order to create better in vitro mimics of cellular complexity of the native tissues.