Search

Diabetes management demands precise monitoring of key biomarkers, particularly insulin (I) and glucose (G). Herein, we present a bioelectronic chip device that enables the simultaneous detection of I and G in biofluids within 2 min. This dual biosensor chip integrates aptamer-based insulin sensing with enzymatic glucose detection on a single platform, employing a four-electrode sensor chip. The insulin voltammetric sensor employs a G-quadraplex methylene-blue-modified aptamer, while the amperometric biocatalytic glucose sensor utilizes a second-generation mediator-based approach. Simultaneous reagent-less sensing of I and G has been achieved by addressing key challenges. These include combining different surface chemistries, assay formats, and detection principles at closely spaced working electrodes and the substantially different concentration levels of the I and G targets. An attractive analytical performance, with no apparent crosstalk, is demonstrated for the simultaneous detection of millimolar G concentrations and picomolar I concentrations in single microliter serum or saliva sample droplets. This dual biosensor offers rapid, cost-effective, and reliable monitoring, addressing the unmet need for integrated multiplexed diabetes biomarker detection in decentralized settings. Such integration of enzymatic and aptamer-based bioassays could greatly expand the scope of decentralized testing in healthcare beyond diabetes care.

Despite its broad potential applications, substitution of carbon by transition metal atoms in graphene has so far been explored only to a limited extent. We report the realization of substitutional Mn doping of graphene to a record high atomic concentration of 0.5%, which was achieved using ultralow-energy ion implantation. By correlating the experimental data with the results of ab initio Born-Oppenheimer molecular dynamics calculations, we infer that direct substitution is the dominant mechanism of impurity incorporation. Thermal annealing in ultrahigh vacuum provides efficient removal of surface contaminants and additional implantation-induced disorder, resulting in Mn-doped graphene that, aside from the substitutional Mn impurities, is essentially as clean and defect-free as the as-grown layer. We further show that the Dirac character of graphene is preserved upon substitutional Mn doping, even in this high concentration regime, making this system ideal for studying the interaction between Dirac conduction electrons and localized magnetic moments. More generally, these results show that ultralow energy ion implantation can be used for controlled functionalization of graphene with substitutional transition-metal atoms, of relevance for a wide range of applications, from magnetism and spintronics to single-atom catalysis.

With the rising diabetic population, the demand for glucose sensing devices has also been on an increasing trend. Accordingly, the field of glucose biosensors for diabetes management has witnessed tremendous scientific and technological advancements since the introduction of the first enzymatic glucose biosensor in the 1960s. Among these, electrochemical biosensors hold considerable potential for tracking dynamic glucose profiles in real time. The recent evolution of wearable devices has opened opportunities to use alternative body fluids in a pain-free, noninvasive or minimally invasive manner. This review aims to present a comprehensive report about the status and promise of wearable electrochemical sensors for on-body glucose monitoring. We start by highlighting the importance of diabetes management and how sensors can contribute toward its effective monitoring. We then discuss the electrochemical glucose sensing mechanisms, evolution of such glucose sensors over time, different versions of wearable glucose biosensors targeting various biofluids, and multiplexed wearable sensors toward optimal diabetes management. Finally, we focus on the commercial aspects of wearable glucose biosensors, starting with existing continuous glucose monitors, followed by other emerging sensing technologies, and concluding with highlighting the key prospects toward personalized diabetes management in connection to an autonomous closed-loop artificial pancreas.

β-Hydroxybutyrate (HB) is one of the main physiological ketone bodies that play key roles in human health and wellness. Besides their important role in diabetes ketoacidosis, ketone bodies are currently receiving tremendous attention for personal nutrition in connection to the growing popularity of oral ketone supplements. Accordingly, there are urgent needs for developing a rapid, simple, and low-cost device for frequent onsite measurements of β-hydroxybutyrate (HB), one of the main physiological ketone bodies. However, real-time profiling of dynamically changing HB concentrations is challenging and still limited to laboratory settings or to painful and invasive measurements (e.g., a commercial blood ketone meter). Herein, we address the critical need for pain-free frequent HB measurements in decentralized settings and report on a reliable noninvasive, simple, and rapid touch-based sweat HB testing and on its ability to track dynamic HB changes in secreted fingertip sweat, following the intake of commercial ketone supplements. The new touch-based HB detection method relies on an instantaneous collection of the fingertip sweat at rest on a porous poly(vinyl alcohol) (PVA) hydrogel that transports the sweat to a biocatalytic layer, composed of the β-hydroxybutyrate dehydrogenase (HBD) enzyme and its nicotinamide adenine dinucleotide (NAD + ) cofactor, covering the modified screen-printed carbon working electrode. As a result, the sweat HB can be measured rapidly by the mediated oxidation reaction of the nicotinamide adenine dinucleotide (NADH) product. A personalized HB dose-response relationship is demonstrated within a group of healthy human subjects taking commercial ketone supplements, along with a correlation between the sweat and capillary blood HB levels. Furthermore, a dual disposable biosensing device, consisting of neighboring ketone and glucose enzyme electrodes on a single-strip substrate, has been developed toward the simultaneous touch-based detection of dynamically changing sweat HB and glucose levels, following the intake of ketone and glucose drinks.

Nanotherapeutics has emerged as the most sought after approach to tackle the menace of drug-resistant pathogenic bacteria. Among others, biogenic silver nanoparticles (bAgNPs) synthesized using medicinal plant extracts demonstrate promising antibacterial propensity with excellent biocompatibility. Herein, bAgNPs were synthesized through the green chemistry approach using Syzygium cymosum leaf extract as a reducing agent at different pH values (i.e., 5, 7, 8, and 10). The average size of bAgNPs synthesized at pH 5, 7, 8, and 10 was 23.3, 21.3, 17.2, and 35.3 nm, respectively, and all the nanoparticles were negatively charged. Their antibacterial potential was investigated against Bacillus subtilis , Escherichia coli DH5α, E. coli K12, enteropathogenic E. coli , and Salmonella typhi . The highest antibacterial activity was exhibited by bAgNPs synthesized at pH 8 against all the tested bacterial strains, which can be attributed to their small size and greater surface area to volume ratio. The bAgNPs demonstrated the highest zone of inhibition (29.5 ± 0.8 mm) against B. subtilis through oxidation of membrane fatty acids that resulted in the formation of the malondialdehyde-thiobarbituric acid (MDA-TBA) adduct. However, bAgNPs demonstrated excellent hemocompatibility with rat and human red blood cells. Biogenic AgNPs synthesized at pH 8 also exhibited biocompatibility in terms of liver and kidney function biomarkers. Furthermore, hematoxylin and eosin staining of the tissue sections of vital organs (i.e., liver, kidneys, lungs, heart, spleen, and brain) also confirmed the biocompatibility of bAgNPs., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Wearable and wireless monitoring of biomarkers such as lactate in sweat can provide a deeper understanding of a subject's metabolic stressors, cardiovascular health, and physiological response to exercise. However, the state-of-the-art wearable and wireless electrochemical systems rely on active sweat released either via high-exertion exercise, electrical stimulation (such as iontophoresis requiring electrical power), or chemical stimulation (such as by delivering pilocarpine or carbachol inside skin), to extract sweat under low-perspiring conditions such as at rest. Here, we present a continuous sweat lactate monitoring platform combining a hydrogel for osmotic sweat extraction, with a paper microfluidic channel for facilitating sweat transport and management, a screen-printed electrochemical lactate sensor, and a custom-built wireless wearable potentiostat system. Osmosis enables zero-electrical power sweat extraction at rest, while continuous evaporation at the end of a paper channel allows long-term sensing from fresh sweat. The positioning of the lactate sensors provides near-instantaneous sensing at low sweat volume, and the custom-designed potentiostat supports continuous monitoring with ultra-low power consumption. For a proof of concept, the prototype system was evaluated for continuous measurement of sweat lactate across a range of physiological activities with changing lactate concentrations and sweat rates: for 2 h at the resting state, 1 h during medium-intensity exercise, and 30 min during high-intensity exercise. Overall, this wearable system holds the potential of providing comprehensive and long-term continuous analysis of sweat lactate trends in the human body during rest and under exercising conditions.

Inclusion complexation is one of the best strategies for developing a controlled release of a toxic drug without unexpected side effects from the very beginning of the administration to the target site. In this study, three benzimidazolium based ionic liquids (ILs) having bromide anion and cation bearing long alkyl chains, hexyl- ([C 6 CFBim]Br), octyl- ([C 8 CFBim]Br), and decyl- ([C 10 CFBim]Br) were designed and synthesized as antibacterial drugs. Inclusion complexes (ICs) of studied ILs have been prepared by the combination of β-cyclodextrin (β-CD), considering these conjugations should enhance the benignity of ILs and make them potential candidates for the controlled drug release. Characterizations and structural analysis of studied ICs have been performed by 1 H NMR, 2D-ROESY NMR, FT-IR, HRMS, TGA, DSC, surface tension, ionic conductivity, dynamic light scattering (DLS), and isothermal titration calorimetry (ITC). Further, the morphology of the ICs has been analyzed by SEM and TEM. Furthermore, neat ILs and ICs have been treated against Escherichia coli and Bacillus subtilis to investigate their antibacterial activity, which confirms the prevention of bacterium growth and the shrinkage of the bacterial cell wall. The findings of this work provide the proof of concept that studied benzimidazolium based ILs-β-CD host-guest complexes should act as a potential candidate in controlled drug delivery and other biomedical applications., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Biomarkers in sweat are a largely untapped source of health information. Most of the currently available sweat harvesting and testing devices are incapable of operating under low-sweat rates such as those experienced by humans at rest. Here we analyze the in vitro and in vivo sampling of sweat through osmosis via the use of a hydrogel interfaced with the skin, without need for active perspiration. The hydrogel also interfaces with paper-based microfluidics to transport the fluid via capillary forces toward a testing zone and then evaporation pad. We show that the hydrogel solute content and area of the evaporation pad regulate the long-term extraction of sweat and its associated biomarkers. The results indicate that the platform can sample biomarkers from a model skin system continuously for approximately 12 h. On-skin testing of the platform on both resting and exercising human subjects confirms that it can sample sweat lactate directly from the surface of skin. The results highlight that lactate in sweat increases with exercise and as a direct result of muscle activity. Implementation of such new principles for sweat fluid harvesting and management via wearable patch devices can contribute toward the advancement of next generation wearables.

Curcumin is an important molecule with a plethora of pharmacological activities and therapeutic potentials. Despite its efficacy, it remained a potential drug candidate owing to hydrolytic instability and poor aqueous solubility. To overcome the limitations related to low solubility, low bioavailability, and the fact that curcumin is never present in solution as a "single unit", its complex was prepared with Mn II with the idea that binding to a metal ion might help to resolve these issues. The complex was characterized by elemental and spectral analysis. The structure of the complex was determined by density functional theory calculations. The complex was stable at physiological buffer conditions, unlike curcumin. It did not have any detrimental effect on mammalian cells. There was a significant enhancement in the antibacterial activity of the complex compared to curcumin against both Gram-positive ( Staphylococcus aureus ) and Gram-negative ( Escherichia coli ) bacteria. It showed a strong affinity for deoxyribonucleic acid (DNA) evident from a high binding constant value with calf thymus DNA and also from the retarded electrophoretic mobility of bacterial plasmid DNA. The complex showed "superoxide dismutase-like" activity leading to the generation of reactive oxygen species (ROS). The complex caused bacterial membrane perturbation evident from calcein leakage assay, which was further corroborated by scanning and transmission electron microscopic experiments. Overall, the present study shows improved stability and antibacterial potency of a nontoxic complex over curcumin. Its multitargeting mode of action such as ROS-production, effective binding with DNA, and permeabilization of bacterial membrane together allows it to be an effective antibacterial agent that could be taken further for therapeutic use against bacterial infections., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

A controlled tandem synthetic route to azines from various alcohols and hydrazine hydrate by the use of a Ni(II) complex of 2,6-bis(phenylazo)pyridine as a catalyst is reported. In marked contrast to the previous report, the reaction is operative using an earth-abundant metal catalyst, milder reaction conditions, and aerobic conditions, which though are desirable but unprecedented in the literature. The catalytic reaction has a vast substrate scope including a single-step synthesis of phthalazine from 1,2-benzenedimethanol and hydrazine hydrate via intramolecular coupling. Mechanistic investigation suggests that the coordinated ligand redox controls the reaction by the use of a reversible azo (N═N)/ hydrazo (NH-NH) redox couple where the metal center is used primarily as a template.

Syntheses of fluorinated sugar amino acid derived α,γ-cyclic tetra- and hexapeptides are reported. The IR, NMR, ESI-MS, CD, and molecular modeling studies of cyclic tetra- and hexapeptides showed C 2 and C 3 symmetric flat oval- and triangular-ring shaped β-strand conformations, respectively, which appear to self-assemble into nanotubes. The α,γ-cyclic hexapeptide (EC 50 = 2.14 μM) is found to be a more efficient ion transporter than α,γ-cyclic tetrapeptide (EC 50 = 14.75 μM). The anion selectivity and recognition of α,γ-cyclic hexapeptide with NO 3 - ion is investigated.

In this work, ortho-C-N bond fusion reactions of aniline are followed by the use of two different ruthenium mediators. Reaction of aniline with [Ru III (terpy)Cl 3 ] (terpy = 2,2':6',2″-terpyridine) resulted in a trans bis-aniline ruthenium(II) complex [1] + which upon oxidation with H 2 O 2 produced compound [2] + of a bidentate ligand, N-phenyl-1,2-benzoquinonediimine, due to an oxidative ortho-C-N bond fusion reaction. Complex [1] + and aniline (neat) at 185 °C produced a bis-chelated ruthenium complex (3). A previously reported complex [Ru II (N-phenyl-1,2-benzoquinonediimine)(aniline) 2 (Cl) 2 ] (5) undergoes similar oxidation by air at 185 °C to produce complex [3]. A separate chemical reaction between aniline and strongly oxidizing tetra-n-propylammonium perruthenate [(n-pr) 4 N] + [RuO 4 ] - in air produced a ruthenium complex [4] of a N 4 -tetraamidophenylmacrocycle ligand via multiple ortho-C-N bond fusion reaction. Notably, the yield of this product is low (5%) at 100 °C but increases to 25% in refluxing aniline. All these complexes are characterized fully by their physicochemical characterizations and X-ray structure determination. From their structural parameters and other spectroscopic studies, complex [2] + is assigned as [Ru II (terpy)(N-phenyl-1,2-benzoquinonediimine)(Cl)] + whereas complex [4] is described as a ruthenium(VI) complex comprised of a reduced deprotonated N-phenyl-1,2-diamidobenzene and N 4 -tetraamidophenylmacrocyclic ligand. Complex [2] + exhibits one reversible oxidation at 1.32 V and one reversible reduction at -0.75 V vs Ag/AgCl reference electrode. EPR of the electrogenerated complexes has revealed that the oxidized complex is a ruthenium(III) complex with an axial EPR spectrum at g av = 2.06. The reduced complex [2], on the other hand, shows a single-line EPR signal at g av = 1.998. In contrast, complex [4] shows two successive one-electron oxidation waves at 0.5 and 0.8 V and an irreversible reduction wave at -0.9 V. EPR studies of the oxidized complexes [4] + and [4] 2+ reveal that oxidations are ligand centered. DFT calculations were employed to elucidate the electronic structures as well as the redox processes associated with the above complexes. Aerial ortho-C-N bond fusion reactions of aniline using two different mediators, viz. [Ru III (terpy)Cl 3 ] and [(n-pr) 4 N] + [RuO 4 ] - , have been followed. It is found that in the case of oxidizable Ru(III) mediator complex, C-N bond fusion is limited only to dimerization reaction whereas the high-valent Ru(VII) salt mediates multiple C-N bond fusion reactions leading to the formation of a novel tetradentate N 4 -tetraamidophenylmacrocyclic ligand. Valence ambiguity in the complexes of the resultant redox-active ligands is scrutinized.

Despite the great interest in artificial ion channel design, only a small number of channel-forming molecules are currently available for addressing challenging problems, particularly in the biological systems. Recent advances in chloride-mediated cell death, aided by synthetic ion carriers, encouraged us to develop chloride selective supramolecular ion channels. The present work describes vicinal diols, tethered to a rigid 1,3-diethynylbenzene core, as pivotal moieties for the barrel-rosette ion channel formation, and the activity of such channels was tuned by controlling the lipophilicity of designed monomers. Selective transport of chloride ions via an antiport mechanism and channel formation in the lipid bilayer membranes were confirmed for the most active molecule. A theoretical model of the supramolecular barrel-rosette, favored by a network of intermolecular hydrogen bonding, has been proposed. The artificial ion-channel-mediated transport of chloride into cells and subsequent disruption of cellular ionic homeostasis were evident. Perturbation of chloride homeostasis in cells instigates cell death by inducing the caspase-mediated intrinsic pathway of apoptosis.

Transmembrane anion transport modality is enjoying a renewed interest because of recent advances toward anticancer therapy. Here we show bis(sulfonamides) as efficient receptors for selective Cl(-) ion binding and transport across lipid bilayer membranes. Anion-binding studies by (1)H NMR indicate a logical correlation between the acidity of sulfonamide N-H proton and binding strength. Such recognition is influenced further by the lipophilicity of a receptor during the ion-transport process. The anion-binding and transport activity of a bis(sulfonamide) system are far superior compared to those of the corresponding bis(carboxylic amide) derivative. Fluorescent-based assays confirm the Cl(-)/anion antiport as the operational mechanism of the ion transport by bis(sulfonamides). Disruption of ionic homeostasis by the transported Cl(-) ion, via bis(sulfonamide), is found to impose cell death. Induction of a caspase-dependent intrinsic pathway of apoptosis is confirmed by monitoring the changes in mitrochondrial membrane potential, cytochrome c leakage, activation of family of caspases, and nuclear fragmentation studies.

Artificial anion selective ion channels with single-file multiple anion-recognition sites are rare. Here, we have designed, by hypothesis, a small molecule that self-organizes to form a barrel rosette ion channel in the lipid membrane environment. Being amphiphilic in nature, this molecule forms nanotubes through intermolecular hydrogen bond formation, while its hydrophobic counterpart is stabilized by hydrophobic interactions in the membrane. The anion selectivity of the channel was investigated by fluorescence-based vesicle assay and planar bilayer conductance measurements. The ion transport by a modified hopping mechanism was demonstrated by molecular dynamics simulation studies.

The study investigates the potential of substitution of the conventional carbohydrate nutrient (cellulose) in media with cheap agro-residues for cellobiose dehydrogenase production by Termitomyces clypeatus (CDHtc) under submerged conditions. Different agro-residues tested for enzyme production were characterized using FTIR and XRD analysis. As CDHtc production was highest with tamarind kernel powder (TKP), it was selected for process optimizations through shake-flask fermentations. The optimized parameters were then applied to batch cultures in a 5 L bioreactor that gave enzyme yield (57.4 U mL⁻¹) similar to that obtained under shake-flask fermentations (57.05 U mL⁻¹). The study also made an attempt to predict CDHtc production with respect to time of fermentation and mycelial growth. The specific growth rate and carrying capacity of the mycelia were also determined, and the values lie in the ranges of 0.024-0.027 h⁻¹ and 7.2-7.1 mg mL⁻¹, respectively.