Search

A new capillary electrophoresis (CE) method was established for the quantitative determination of furosine in dairy products. Sample preparation and suitable electrophoretic conditions allowed accurate and reproducible quantitation of furosine in dairy products. Sample preparation consisted of drying hydrolyzed samples, redissolving them in 0.2 M NaOH, and purifying them by solid-phase extraction. The electrophoretic separation was carried out in an uncoated capillary maintained at 30 degrees C using 0.1 M phosphate buffer containing the additive hexadecyl trimethylammonium bromide (HDTAB, 1.2 mM) (pH 7.0) under 10 kV voltage and reverse polarity. Coefficients of variation of less than 2.25% for migration time and 5.80% for peak areas indicated that the technique was reproducible. The calibration curve followed a linear relationship with a highly significant (p < 0.01) coefficient of multiple determination (R (2) = 0.997). The limit of quantitation was 0.5 ppm, a concentration that corresponds to 4.5 mg/100 g of protein in milk samples. Furosine concentration (mg/100 g of protein) ranges of different dairy products (raw, pasteurized, UHT, and evaporated milks and yogurt) agreed with ranges previously reported. Therefore, the CE method presented is a suitable technique for the routine assessment of furosine in dairy products.

Solid phase microextraction (SPME) and gas chromatography were used for tequila volatile characterization and ethyl ester quantitation. Several factors determined the differences in tequila volatile profiles obtained by the SPME technique, namely, sampling mode, fiber coating, and fiber exposure time. Each of these factors determined the most suitable conditions for the analysis of volatile profiles in tequila. Volatile extraction consisted of placing 40 mL of tequila in a sealed vial kept at 40 degrees C. A poly(dimethylsiloxane) fiber was immersed in the liquid for 60 min and desorbed for 5 min into the gas chromatograph. The identified volatiles by mass spectrometry were mainly alcohols, esters, and ketones. The calibration curves for ethyl hexanoate, octanoate, and decanoate followed linear relationships with highly significant (p < 0.001) determination coefficients (R2 = 0.99). The coefficients of variation of less than 10% for ethyl ester concentrations indicated that the technique was reproducible. The limits of quantitation for ethyl esters were 0.05 parts per million, which were below the concentration range (0.27-15.03 ppm) found for different tequila samples. Quantitative differences in ethyl esters were found for the four most commonly known tequila types: silver, gold, aged, and extra-aged.

The objective was to establish a method for detecting and predicting hydrolytic rancidity in milk by correlating quantitative sensory data with individual short-chain free fatty acids (FFA) (C(4)-C(12)) in milk determined by solid phase microextraction and gas chromatography (SPME-GC). A FFA-based equation for determining rancid flavor intensities in milk was derived by stepwise regression analysis. A highly significant (p < 0.001) correlation coefficient (R (2)) of 0.84 indicated that rancidity scores were dependent on FFA obtained by SPME-GC and that a good proportion of the variation in the rancidity scores was explained by the model. When rancidity scores were predicted for 19 commercial milks, one sample was found to be distinctly rancid by the statistical model and by the trained sensory panel. The rest of the samples were found to be nonrancid by either method. Thus, the predicting power of the model was shown because there was 100% correct flavor classification for the samples tested.

The objective was to establish a rapid, precise, and accurate methodology for the quantification of short-chain free fatty acids (FFA) (C(4)-C(12)) in milk by solid-phase microextraction and gas chromatography. Sampling conditions such as fiber type, pH, salt addition, temperature, volume, and time were investigated. FFA extraction consisted of placing 40 mL of milk containing 28% NaCl at pH 1.5 in a sealed vial and equilibrating for 30 min at 70 degrees C. A polyacrylate fiber was exposed to the sample headspace for 60 min and desorbed for 5 min into the gas chromatograph. Calibration curves for FFA followed linear relationships with highly significant (p < 0.001) correlation coefficients (R(2) = 0.99). Coefficients of variation of less than 7.7% for FFA concentrations indicated that the technique was reproducible. The limits of quantification for C(4)-C(10) were in the low parts per million level, which were below the concentration range found in fresh pasteurized milk (0.48-2.52 ppm) or rancid milk (4.73-32.31 ppm).