Search

We demonstrate a facile approach to encapsulate ligand-stabilized Au55 clusters [Au55(PPh3)12Cl6] within highly oriented surface-supported metal–organic framework (SURMOF) thin films via liquid-phase epitaxy. The Au55 clusters were successfully loaded into the pores of SURMOF during their fabrication, which has been confirmed by X-ray diffraction, infrared spectroscopy, and ultraviolet–visible spectroscopy. Computational modeling reveals that there is a strong interaction between the Au55 core and the oligophenyl ligands of the MOF pore, leading to a removal of the PPH3 ligands. The stabilized Au55 clusters within SURMOF exhibit excellent catalytic activity for the reduction of 4-nitrophenol. [ABSTRACT FROM AUTHOR]

Nanoporous gold (NPG) is a versatile, nanoporous bulk material with applications in catalysis, sensors, energy materials, and actuation. NPG obtained from dealloying Ag-rich Au–Ag alloys has interesting applications in electrocatalysis, for which methanol oxidation is an interesting test case. Such materials always contain a content of residual silver which may play a role in activating and binding of reaction intermediates. The residual Ag that is contained in NPG due to the dealloying of a Ag–Au alloy was recently found to be present in silver-rich islands, in contrast to being homogeneously distributed. Because of the importance of residual Ag on the surface science and catalytic properties of NPG, we investigated its distribution and chemical nature with the use of X-ray photoelectron spectroscopy. During the in situ annealing, changes of the near surface content of residual Ag were observed, and they were linked to coarsening of the gold ligaments. In addition, a depth-dependent analysis of synchrotron-based XPS results confirmed the surface segregation in the near surface layers of each ligament. The available data neither confirm nor exclude a further systematic enrichment or depletion of silver in the topmost atomic layer for NPG during electrochemical treatments in KOH solution or during thermal coarsening. [ABSTRACT FROM AUTHOR]

We present a combined low-temperature scanning tunneling microscopy and near-edge X-ray adsorption fine structure study on the interaction of tetrapyridyl-porphyrin (TPyP) molecules with a Cu-(111) surface. A novel approach using data from complementary experimental techniques and charge density calculations allows us to determine the adsorption geometry of TPyP on Cu(111). The molecules are centered on "bridge" sites of the substrate lattice and exhibit a strong deformation involving a saddle-shaped macrocycle distortion as well as considerable rotation and tilting of the meso-substituents. We propose a bonding mechanism based on the pyridyl-surface interaction, which mediates the molecular deformation upon adsorption. Accordingly, a functionalization by pyridyl groups opens up pathways to control the anchoring of large organic molecules on metal surfaces and tune their conformational state. Furthermore, we demonstrate that the affinity of the terminal groups for metal centers permits the selective capture of individual iron atoms at low temperature. [ABSTRACT FROM AUTHOR]

Self-assembled monolayers (SAMs) of two ω-(4′-methylbiphenyl-4-yl)alkanethiols (CH3(C6H4)2-(CH2)nSH, BPn, n = 4, 6) on Au(111) substrates, prepared from solution at room temperature and subsequently annealed at temperatures up to 493 K under a nitrogen atmosphere, were studied using scanning tunneling microscopy (STM), high-resolution X-ray photoelectron spectroscopy (HRXPS), and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). In striking contrast to BPn SAMs with n = odd, for which only one phase is observed, the even-numbered BPn SAMs exhibit polymorphism. Irreversible phase transitions occur which involve three phases differing substantially in density and stability. Upon annealing, BP4 and BP6 transform into a β-phase, which is characterized by an exceptionally high structural quality with virtually defect-free domains exceeding 500 nm in diameter. Exchange experiments, monitored by contact angle measurement, reveal that the β-phase exhibits a dramatically improved stability. The fundamental differences in the phase behavior of even- and odd-numbered BPn SAMs are discussed in terms of two design strategies based on cooperative and competitive effects. [ABSTRACT FROM AUTHOR]

The formation and molecular structure of self-assembled monolayers (SAMs) of anthracene-2- thiol (AnT) on Au(111) have been characterized by reflection adsorption infrared spectroscopy, thermal desorption spectroscopy, X-ray photoelectron spectroscopy, near-edge X-ray absorption spectroscopy, scanning tunneling microscopy, and low energy electron diffraction. It is demonstrated that highly ordered monolayer films are formed upon immersion, but their quality depends critically on the choice of solvents and rinsing conditions. The saturated monolayer is characterized by a closed packed arrangement of upright standing molecules forming a (2 3√ × 4)rect unit cell. At about 450 K a partial desorption takes place and the remaining molecules form a dilute (4 × 2)-phase with an almost planar adsorption geometry, while further heating above 520 K causes a thermally induced fragmentation. According to their different densities both phases reveal very diverse chemical reactivities. Whereas the saturated monolayer is stable and inert under ambient conditions, the dilute phase does not warrant any protection of the sulfur headgroups which oxidize rapidly in air. [ABSTRACT FROM AUTHOR]

The article cites a study on the formation of metal-organic frameworks (MOFS). Such study reveals the synthesis protocols, where the educts are mixed and treated under solvothermal conditions. It cites that the use of functionalized organic surface as a nucleation site reveals the growth of MOF structures. Further, the study features the kinetics of the individual steps and it also provides the potential to fabricate structures.

The article focuses on metal organic open framework coordination polymers (MOFs) based on zinc carboxylate structural motifs. MOFs are fascinating because of extraordinary gas-storage capacities for hydrogen and hydrocarbons. Other interesting applications are emerging, as well, including gas separation, gas sensing, and catalysis. Fine-tuning size, shape, and chemical functionality of the nanoscale cavities and the internal surface offers prospects for a unique supramolecular host-guest chemistry of these zeolith-type organic-inorganic hybrid materials.

Easy-to-integrate, remote read-out thermometers with fast response are of huge interest in numerous application fields. In the context of optical read-out devices, sensors based on the emission of lanthanides (Eu(III), Tb(III)) are particularly promising. Here, by using a layer-by-layer (LbL) approach in the liquid-phase epitaxy process, a series of continuous, low-thickness lanthanide-MIL-103 SURMOFs were fabricated to yield highly sensitive thermometers with optical readout. These Ln-SURMOFs exhibit remarkable temperature-sensing photoluminescence behavior, which can be read out using the naked eye. High transmittance is realized as well by precisely controlling the film thickness and the quality of these Ln-SURMOF thermometers. Moreover, we demonstrate that the thermal sensitivity can be improved in the temperature regime above 120 K, by controlling the energy transfer between Tb(III) and Eu(III). This performance is achieved by employing a sophisticated supramolecular architecture, namely MOF-on-MOF heteroepitaxy.

Fabrication of metal-organic framework (MOF) thin films rigidly anchored on suitable substrates is a crucial prerequisite for the integration of these porous hybrid materials into electronic and optical devices. Thus, far, the structural variety for MOF thin films available through layer-by-layer deposition was limited, as the preparation of those surface-anchored metal-organic frameworks (SURMOFs) has several requirements: mild conditions, low temperatures, day-long reaction times, and nonaggressive solvents. We herein present a fast method for the preparation of the MIL SURMOF on Au-surfaces under rather harsh conditions: Using a dynamic layer-by-layer synthesis for MIL-68(In), thin films of adjustable thickness between 50 and 2000 nm could be deposited within only 60 min. The MIL-68(In) thin film growth was monitored in situ using a quartz crystal microbalance. In-plane X-ray diffraction revealed oriented MIL-68(In) growth with the pore-channels of this interesting MOF aligned parallel to the support. Scanning electron microscopy data demonstrated an extraordinarily low roughness of the MIL-68(In) thin films. Mechanical properties and lateral homogeneity of the layer were probed through nanoindentation. These thin films showed extremely high optical quality. By applying a poly(methyl methacrylate) layer and further depositing an Au-mirror to the top, a MOF optical cavity was fabricated that can be used as a Fabry-Perot interferometer. The MIL-68(In)-based cavity showed a series of sharp resonances in the ultraviolet-visible regime. Changes in the refractive index of MIL-68(In) caused by exposure to volatile compounds led to pronounced position shifts of the resonances. Thus, these cavities are well suited to be used as optical read-out sensors.

Biomaterial surfaces that are in contact with blood are often prone to unspecific protein adsorption and the activation of the blood clotting cascade. Hence, such materials usually must be functionalized with low-fouling or anticoagulant polymer coatings to increase their performance and durability with respect to various applications, for example as implants or in biomedical devices. Many coatings are based on anionic polymers, such as heparin, and are known to have pronounced anticoagulant effects. To assess the ability of a surface to prevent biofouling and to get further insight into its underlying mechanism, studies of the protein adsorption on self-assembled monolayers (SAMs) are often used as a predictive tool. In this article, we synthesized thioctic acid-functionalized dendritic polyglycerol sulfate (dPGS), which is a well-known synthetic heparin mimetic, and immobilized it onto gold model surfaces. The anionic dPGS SAMs were characterized via contact angle measurements and ellipsometry and compared to their neutral dendritic polyglycerol (dPG) counterparts with respect to their single protein adsorption of the two most abundant blood proteins albumin (Alb) and fibrinogen (Fib). In addition, we used QCM-D and ToF-SIMS as complementary techniques to investigate the dynamic, mixed, and sequential adsorption of Alb and Fib. Our results clearly demonstrate an incomplete Vroman effect and indicate the rearrangement of the adsorbed protein layers, which is presumably drive by ionic interactions between the two proteins and the anionic dPGS surface.

We investigate the electronic and vibrational properties of bottom-up synthesized aligned armchair graphene nanoribbons of N = 7 carbon atoms width periodically doped by substitutional boron atoms (B-7AGNRs). Using angle-resolved photoemission spectroscopy and density functional theory calculations, we find that the dopant-derived valence and conduction band states are notably hybridized with electronic states of Au substrate and spread in energy. The interaction with the substrate leaves the bands with pure carbon character rather unperturbed. This results in an identical effective mass of ≈0.2 m 0 for the next-highest valence band compared with pristine 7AGNRs. We probe the phonons of B-7AGNRs by ultrahigh-vacuum (UHV) Raman spectroscopy and reveal the existence of characteristic splitting and red shifts in Raman modes due to the presence of substitutional boron atoms. Comparing the Raman spectra for three visible lasers (red, green, and blue), we find that interaction with gold suppresses the Raman signal from B-7AGNRs and the energy of the green laser (2.33 eV) is closer to the resonant E 22 transition. The hybridized electronic structure of the B-7AGNR-Au interface is expected to improve electrical characteristics of contacts between graphene nanoribbon and Au. The Raman fingerprint allows the easy identification of B-7AGNRs, which is particularly useful for device fabrication.

Organic chromophores that exhibit aggregation-induced emission (AIE) are of interest for applications in displays, lighting, and sensing, because they can maintain efficient emission at high molecular concentrations in the solid state. Such advantages over conventional chromophores could allow thinner conversion layers of AIE chromophores to be realized, with benefits in terms of the efficiency of the optical outcoupling, thermal management, and response times. However, it is difficult to create large-area optical quality thin films of efficiently performing AIE chromophores. Here, we demonstrate that this can be achieved by using a surface-anchored metal-organic framework (SURMOF) thin film coating as a host substrate, into which the tetraphenylethylene (TPE)-based AIE chromophore can be printed. We demonstrate that the SURMOF constrains the AIE-chromophore molecular conformation, affording efficient performance even at low loading densities in the SURMOF. As the loading density of the AIE chromophore in the SURMOF is increased, its absorption and emission spectra are tuned due to increased interaction between AIE molecules, but the high photoluminescent quantum yield (PLQY = 50% for this AIE chromophore) is maintained. Lastly, we demonstrate that patterns of the AIE chromophore with 70 μm feature sizes can be easily created by inkjet printing onto the SURMOF substrate. These results foreshadow novel possibilities for the creation of patterned phosphor thin films utilizing AIE chromophores for display or lighting applications.

We demonstrate that surface-anchored metal-organic frameworks (SURMOFs) are extraordinary well-suited as resists for high-resolution focused electron beam induced processing (FEBIP) techniques. The combination of such powerful lithographic protocols with the huge versatility of MOF materials are investigated in respect to their potential in nanostructures fabrication. The applied FEBIP methods rely on the local decomposition of Fe(CO) 5 and Co(CO) 3 NO as precursors, either by the direct impact of the focused electron beam (electron beam induced deposition, EBID) or through the interaction of the precursor molecules with preirradiated/activated SURMOF areas (electron beam induced surface activation, EBISA). We demonstrate the huge potential of the approach for two different types of MOFs (HKUST-1 and Zn-DPDCPP). Our "surface science" approach to FEBIP, yields well-defined deposits with each investigated precursor/SURMOF combination. Local Auger electron spectroscopy reveals clean iron deposits from Fe(CO) 5 ; deposits from Co(CO) 3 NO contain cobalt, nitrogen, and oxygen. EBISA experiments were successful with Fe(CO) 5 . Remarkably EBISA with Co(CO) 3 NO does not result in deposit formation on both resists, making the process chemically selective. Most importantly we demonstrate the fabrication of "nested-L" test structures with Fe(CO) 5 on HKUST-1 with extremely narrow line widths of partially less than 8 nm, due to reduced electron proximity effects within the MOF-based resists. Considering that the actual diameter of the electron beam was larger than 6 nm, we see a huge potential for significant reduction of the structure sizes. In addition, the role and high potential of loading and transport of the precursor molecules within the porous SURMOF materials is discussed.

Development of surface coatings with high antimicrobial activity is urgently required to fight bacteria and other microorganisms on technical and hygiene relevant surfaces. Control over structure and topology of the surface coatings, combined with the ability to include functional molecules within the structure, is crucial for optimizing their performance. Herein, we describe a novel strategy to synthesize structurally well-defined porphyrin polymer thin films via a template approach. In this approach, bisazido-functionalized porphyrin molecules are preorganized within a metal-organic framework (MOF) structure. Afterward, porphyrin units within the MOF are covalently connected via a secondary linker. Removal of the metal ions of the MOF results in water-stable porphyrin polymer thin films that demonstrate high antibacterial activity against pathogens via visible-light-promoted generation of reactive oxygen species. In addition, this approach offers the inherent possibility to incorporate guest molecules within the structures, to functionalize the surface with biomolecules, and to create hierarchically structured materials.

As in the case of other semiconducting materials, optical and electronic properties of metal-organic frameworks (MOFs) depend critically on defect densities and defect types. We demonstrate here that, in addition to the influence of imperfections on MOF chemical properties like guest binding energies and catalytic activity, the optical properties of these crystalline molecular solids also crucially depend on deviations from the perfect crystalline structure. By recording UV-vis absorption spectra for MOF thin films of particularly high quality, we demonstrate that low-defect samples of an important MOF, HKUST-1, are virtually colorless. Electronic structure calculations of the excited states by employing complete active space self-consistent field (CASSCF) calculations show that the d-d excitations in defects result in the typical green color of the MOF material synthesized by conventional methods.

We report a facile approach to prepare metal-nanocatalyst-incorporated carbon thin films with uniform size distribution via carbonization of surface-mounted metal-organic frameworks (SURMOFs) and metal oxo-clusters loaded SURMOF. The calcinated thin films have high performance of methylene blue degradation and the reduction of nitrobenzene. This study describes a general strategy for preparing various nanoparticle-impregnated porous carbon thin films for applications in catalysis.