Search

The utilization of dielectric barrier discharge (DBD) plasma treatment for modifying substrate surfaces constitutes an easy and simple approach with a potential for diverse applications. This technique was used to modify the surface of a commercial porous expanded poly(tetrafluoroethylene) (ePTFE) film with either dimethylaminoethyl methacrylate (DMAEMA) or (trimethylamino)ethyl methacrylate chloride (TMAEMA) monomers, aiming to obtain antibacterial ePTFE. Physicochemical analyses of the membranes revealed that DBD successfully enhanced the surface energy and surface charge of the membranes while maintaining high porosity (>75%) and large pore size (>1.0 μm). Evaluation of the bacteria killing-releasing (K-R) function revealed that both DMAEMA and TMAEMA endowed ePTFE with the ability to kill Escherichia coli bacteria. However, only TMAEMA-grafted ePTFE allowed for the release of dead bacteria from the surface upon washing with sodium hexametaphosphate (SHMP) saline solution, owing to its cationic charge derived from the quaternary amine. Washing with SHMP disturbed the electrostatic force between the polymer brushes and dead bacteria, which caused the release of the dead bacteria. Lastly, dead-end bacteria filtration showed that the TMAEMA-grafted ePTFE was able to kill 99.78% of the bacteria, while approximately 61.55% of bacteria were killed upon contact. The present findings support the feasibility of using DBD plasma treatment for designing surfaces that target bacteria and aid in the containment of disease-causing pathogens.

Structural engineering of the light-harvesting dyes employed in DSSCs (dye-sensitized solar cells) with a systematic choice of the electron-donating and -accepting groups as well as the π-bridge allows the (photo)physical properties of dyes to match the criteria needed for improving the DSSC efficiency. Herein, we report an effective approach of molecular engineering of DSSC sensitizers, aiming to gain insights on the configurational impact of the fluorenyl unit on the optoelectronic properties and photovoltaic performance of DSSCs. Five new organic dyes ( GZ116 , GZ126 , GZ129 , MA1116 , and MA1118 ) with a D-A-π-A framework integrated with a fluorenyl moiety were designed and synthesized for DSSCs. The fluorenyl unit is configured as part of the π-spacer for the GZ series, whereas it connected on the electron-deficient quinoxaline motif for the MA series. The devices fabricated from the MA1116 sensitizer produced the best performance under standard AM 1.5 G solar conditions as well as dim-light (300-6000 lx) illumination. The devices fabricated from MA1116 displayed a PCE of 8.68% ( J sc = 15.00 mA cm -2 , V oc = 0.82 V, and FF = 0.71) under 1 sun and 26.81% ( J sc = 0.93 mA cm -2 , V oc = 0.68 V, and FF = 0.76) under 6000 lx illumination. The device efficiency based on dye MA1116 under 1 sun outperformed that based on the standard N719 dye, whereas a comparable performance between devices based on MA1116 and N719 was achieved under dim-light conditions. A combination of enhancing the charge separation, suppressing dye aggregation, and providing better insulation that prevents the oxidized redox mediator from approaching the TiO 2 surface all contribute to the superior performance of DSSCs fabricated based on these light-harvesting dyes. The judicious integration of the fluorenyl unit in a D-A-π-A-based DSSC would be a promising strategy to boost the device performance.

The use of molecular modulators to reduce the defect density at the surface and grain boundaries of perovskite materials has been demonstrated to be an effective approach to enhance the photovoltaic performance and device stability of perovskite solar cells. Herein, we employ crown ethers to modulate perovskite films, affording passivation of undercoordinated surface defects. This interaction has been elucidated by solid-state nuclear magnetic resonance and density functional theory calculations. The crown ether hosts induce the formation of host-guest complexes on the surface of the perovskite films, which reduces the concentration of surface electronic defects and suppresses nonradiative recombination by 40%, while minimizing moisture permeation. As a result, we achieved substantially improved photovoltaic performance with power conversion efficiencies exceeding 23%, accompanied by enhanced stability under ambient and operational conditions. This work opens a new avenue to improve the performance and stability of perovskite-based optoelectronic devices through supramolecular chemistry.

Cu(I)/(II) complex redox couples in dye-sensitized solar cell (DSSC) are of particular interest because of their low reorganization energy between Cu(I) and Cu(II), which minimizes the potential loss during sensitizer regeneration, thus allowing the open-circuit voltage of the device to go over 1.0 V. However, Cu(I)/(II)-based redox couples are reported to coordinate with 4- tert -butylpyridine (TBP), which is a standard additive in the electrolyte, and this is believed to account for the poor durability of a Cu(I)/(II)-based DSSCs. Despite TBP coordination on Cu(I)/(II) complexes are confirmed in the literature, its detailed mechanism is yet to be directly proven. In addition, how TBP coordination with Cu(I)/(II) complexes affects the stability of the device is never reported. Here, we choose bis(2,9-dimethyl-1,10-phenanthroline) copper(I)/(II) ([Cu(dmp) 2 2+/+ ]) as the modeling redox couple to investigate its interaction with TBP. It is found that [Cu(dmp) 2 + ] is resistive to TBP coordination but could form three new TBP-coordinated compounds. Moreover, it is also confirmed their electrochemical activity on Pt catalyst and mass transfer capability are both demoted significantly. As a result, serious fill factor loss is observed on the stability trail while short-circuit current density and open-circuit voltage are relatively unaffected. This unique degradation pattern may resemble a feature of Cu(I)/(II)-based redox couple after TBP poisoning.

This paper reports a new approach to realize direct selective electroless deposition (ELD) without the requirement of photolithography. This method involves sequential silane-compound modifications in which the first modification creates a hydrophobic surface on the TiO 2 -coated glass using a fluorine-rich alkoxysilane compound, followed by a laser ablation to create the pattern. Then, the entire substrate is immersed into an aqueous solution containing amino-silane equipped Pd nanoparticles for the second modification. Because most substrate surface is hydrophobic, the amino-silane-equipped Pd catalysts can only graft on the laser-ablated zone to accomplish selective ELD., Competing Interests: The authors declare no competing financial interest.

3D organic-inorganic hybrid halide perovskites have attracted great interest due to their impressive optoelectronic properties. Recently, the emergence of 2D layered hybrid perovskites, with their excellent and tunable optoelectronic behavior, has encouraged researchers to develop the next generation of optoelectronics based on these 2D materials. However, device fabrication methods of scalable patterning on both types of hybrid perovskites are still lacking as these materials are readily damaged by the organic solvents in standard lithographic processes. We conceived the orthogonal processing and patterning method: Chlorobenzene and hexane, which are orthogonal to hybrid perovskites, are utilized in modified electron beam lithography (EBL) processes to fabricate perovskite-based devices without compromising their electronic or optical characteristics. As a proof-of-concept, we used the orthogonal EBL technique to fabricate a 2D layered single-crystal (C 6 H 5 C 2 H 4 NH 3 ) 2 PbI 4 photodetector featuring nanoscale patterned electrodes and superior photodetection ability with responsivity of 5.4 mA/W and detectivity of 1.07 × 10 13 cm Hz 1/2 /W. Such orthogonal processing and patterning methods are believed to fully enable the high-resolution, high-throughput fabrication of complex perovskite-based electronics in the near future.

In this work, we have synthesized a novel porphyrin dye named SK7, which contains two N, N-diarylamino moieties at two β-positions as electron-donating units and one carboxy phenylethynyl moiety at the meso-position as an electron-withdrawing, anchoring group. This novel dye was tested for the application in dye-sensitized solar cells. The light-harvesting behavior of SK7 and YD2 was investigated using UV-vis absorption and density functional calculation. The electron transport properties at the TiO 2 /dye/electrolyte interface for SK7- and YD2-based devices were evaluated by electrochemical impedance spectroscopy. X-ray crystallographic characterization was conducted to understand the influence of two N, N-diarylamino units at two β-positions. The power conversion efficiencies of ca. 6.54% under 1 sun illumination (AM 1.5G) and ca. 19.72% under a T5 light source were noted for the SK7 dye. The performance of SK7 is comparable to that of dye YD2, which contains only one N, N-diarylamino moiety at the meso-position (ca. 7.78 and 20.00% under 1 sun and T5 light, respectively).

Amino-terminated silane compound modification was wet-processed on a silicon wafer using four different solvents to investigate the property of the self-assembled monolayer (SAM) and its influence on the adhesion of electroless deposited nickel-phosphorus (Ni-P) films. Analyzed by various tools including dynamic light scattering, the atomic force microscope, X-ray photoelectron spectroscopy, inductively coupled plasma with mass spectroscopy, a proper link between the processing solvent and SAM quality is established. It is found that at least the chemical compatibility, the polarity, and the acidity of solvents can affect the final morphology of the resultant SAM. Unlike toluene and ethanol that are most frequently chosen in literature, we conclude that isopropyl alcohol (IPA) is a superior solvent for amino-terminated silane compounds. Owing to the good SAM quality formed in IPA, the adhesion of electroless deposited Ni-P films is largely strengthened, even as high as the bulk strength of silicon wafers.

Selenium (Se) is one of the potential candidates as photodetector because of its outstanding properties such as high photoconductivity (∼8 × 10 4 S cm -1 ), piezoelectricity, thermoelectricity, and nonlinear optical responses. Solution phase synthesis becomes an efficient way to produce Se, but a contamination issue that could deteriorate the electric characteristic of Se should be taken into account. In this work, a facile, controllable approach of synthesizing Se nanowires (NWs)/films via a plasma-assisted growth process was demonstrated at the low substrate temperature of 100 °C. The detailed formation mechanisms of nanowires arrays to thin films at different plasma powers were investigated. Moreover, indium (In) layer was used to enhance the adhesive strength with 50% improvement on a SiO 2 /Si substrate by mechanical interlocking and surface alloying between Se and In layers, indicating great tolerance for mechanical stress for future wearable devices applications. Furthermore, the direct growth of Se NWs/films on a poly(ethylene terephthalate) substrate was demonstrated, exhibiting a visible to broad infrared detection ranges from 405 to 1555 nm with a high on/off ratio of ∼700 as well as the fast response time less than 25 ms. In addition, the devices exhibited fascinating stability in the atmosphere over one month.

The need for low-cost and highly efficient dyes for dye-sensitized solar cells under both the sunlight and dim light environments is growing. We have devised GJ-series push-pull organic dyes which require only four synthesis steps. These dyes feature a linear molecular structure of donor-perylene-ethynylene-arylcarboxylic acid, where donor represents N,N-diarylamino group and arylcarboxylic groups represent benzoic, thienocarboxylic, 2-cyano-3-phenylacrylic, 2-cyano-3-thienoacrylic, and 4-benzo[c][1,2,5]thiadiazol-4-yl-benzoic groups. In this study, we demonstrated that a dye without tedious and time-consuming synthesis efforts can perform efficiently. Under the illumination of AM1.5G simulated sunlight, the benzothiadiazole-benzoic-containing GJ-BP dye shows the best power conversion efficiency (PCE) of 6.16% with V OC of 0.70 V and J SC of 11.88 mA cm -2 using liquid iodide-based electrolyte. It also shows high performance in converting light of 6000 lx light intensity, that is, incident power of ca. 1.75 mW cm -2 , to power output of 0.28 mW cm -2 which equals a PCE of 15.79%. Interestingly, the benzoic-containing dye GJ-P with a simple molecular structure has comparable performance in generating power output of 0.26 mW cm -2 (PCE of 15.01%) under the same condition and is potentially viable toward future application.

Flexible electronics will form the basis of many next-generation technologies, such as wearable devices, biomedical sensors, the Internet of things, and more. However, most flexible devices can bear strains of less than 300% as a result of stretching. In this work, we demonstrate a simple and low-cost paper-based photodetector array featuring superior deformability using printable ZnO nanowires, carbon electrodes, and origami-based techniques. With a folded Miura structure, the paper photodetector array can be oriented in four different directions via tessellated parallelograms to provide the device with excellent omnidirectional light harvesting capabilities. Additionally, we demonstrate that the device can be repeatedly stretched (up to 1000% strain), bent (bending angle ±30°), and twisted (up to 360°) without degrading performance as a result of the paper folding technique, which enables the ZnO nanowire layers to remain rigid even as the device is deformed. The origami-based strategy described herein suggests avenues for the development of next-generation deformable optoelectronic applications.

Indoor utilization of emerging photovoltaics is promising; however, efficiency characterization under room lighting is challenging. We report the first round-robin interlaboratory study of performance measurement for dye-sensitized photovoltaics (cells and mini-modules) and one silicon solar cell under a fluorescent dim light. Among 15 research groups, the relative deviation in power conversion efficiency (PCE) of the samples reaches an unprecedented 152%. On the basis of the comprehensive results, the gap between photometry and radiometry measurements and the response of devices to the dim illumination are identified as critical obstacles to the correct PCE. Therefore, we use an illuminometer as a prime standard with a spectroradiometer to quantify the intensity of indoor lighting and adopt the reverse-biased current-voltage (I-V) characteristics as an indicator to qualify the I-V sampling time for dye-sensitized photovoltaics. The recommendations can brighten the prospects of emerging photovoltaics for indoor applications.

Crystal morphology and structure are important for improving the organic-inorganic lead halide perovskite semiconductor property in optoelectronic, electronic, and photovoltaic devices. In particular, crystal growth and dissolution are two major phenomena in determining the morphology of methylammonium lead iodide perovskite in the sequential deposition method for fabricating a perovskite solar cell. In this report, the effect of immersion time in the second step, i.e., methlyammonium iodide immersion in the morphological, structural, optical, and photovoltaic evolution, is extensively investigated. Supported by experimental evidence, a five-staged, time-dependent evolution of the morphology of methylammonium lead iodide perovskite crystals is established and is well connected to the photovoltaic performance. This result is beneficial for engineering optimal time for methylammonium iodide immersion and converging the solar cell performance in the sequential deposition route. Meanwhile, our result suggests that large, well-faceted methylammonium lead iodide perovskite single crystal may be incubated by solution process. This offers a low cost route for synthesizing perovskite single crystal.

By employing graphene quantum dots (GQDs), we have achieved a high efficiency of 16.55% in n-type Si heterojunction solar cells. The efficiency enhancement is based on the photon downconversion phenomenon of GQDs to make more photons absorbed in the depletion region for effective carrier separation, leading to the enhanced photovoltaic effect. The short circuit current and the fill factor are increased from 35.31 to 37.47 mA/cm(2) and 70.29% to 72.51%, respectively. The work demonstrated here holds the promise for incorporating graphene-based materials in commercially available solar devices for developing ultrahigh efficiency photovoltaic cells in the future.

A significant improvement in efficiency is achieved for porphyrin (YD2-o-C8) based dye-sensitized solar cells, coupled with [Co(bpy)3](3+/2+) mediator electrolyte. However, the poison of the counter electrode (CE) by the [Co(bpy)3](3+/2+) mediator remains a significant barrier to producing a reliable high-performance device. In this paper, nitrogen-doped graphene nanosheets (NG) are produced using a low-cost solution-based process and are used as the CE for [Co(bpy)3](3+/2+) based porphyrin-sensitized solar cells. These produce significantly better electrocatalytic activity than the commonly used Pt CE. The superior performance is a result of the increased number of catalytic sites and the wettable surface that is caused by the substitution of pyridinic and pyrrolic N into the carbon-conjugated lattice. To the authors' best knowledge, the significantly improved cycling stability (>1000 times) of NG CE for [Co(bpy)3](3+/2+) redox complexes is demonstrated for the first time.

Layered double hydroxides (LDH), a class of anionic clay materials, were developed as an effective additive for polymer gelled electrolytes for use in dye-sensitized solar cells (DSSC). Carbonate and chloride intercalated Zn-Al LDHs, ZnAl-CO3 LDH, and ZnAl-Cl LDH were prepared with coprecipitation methods. The addition of the two LDHs significantly improved, in terms of power conversion efficiency (PCE), over the plain poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) gelled electrolyte and competed favorably with the liquid electrolyte based DSSCs, 8.13% for the liquid electrolyte, 7.48% for the plain PVDF-HFP gelled electrolyte, 8.11% for the ZnAl-CO3 LDH/PVDF-HFP gelled electrolyte, and 8.00% for the ZnAl-Cl LDH/PVDF-HFP gelled electrolyte based DSSCs. The good performance in PCEs achieved by the LDH-loaded DSSCs came mainly from the significant boost in open circuit voltages (Voc), from 0.74 V for both the liquid electrolyte and PVDF-HFP gelled electrolyte based DSSCs to 0.79 V for both the ZnAl-CO3 LDH/PVDF-HFP and ZnAl-Cl LDH/PVDF-HFP gelled electrolyte based DSSCs. The boost in Voc was contributed mainly by the positive shift in redox potential of the redox couple, I(-)/I3(-), as revealed from cyclic voltammetry analyses. As for the long-term stability, PCE retention rates of 96 and 99% after 504 h were achieved by the ZnAl-CO3 LDH/PVDF-HFP and ZnAl-Cl LDH/PVDF-HFP gelled electrolyte based DSSCs, respectively, appreciably better than 92% achieved by the liquid electrolyte based one after 480 h.

Self-assembled nanocomposites with a high interface-to-volume ratio offer an opportunity to overcome limitations in current technology, where intriguing transport behaviors can be tailored by the choice of proper interactions of constituents. Here we integrated metallic perovskite oxide SrRuO3-wurzite semiconductor ZnO nanocomposites to investigate the room-temperature metal-insulator transition and its effect on photoresponse. We demonstrate that the band structure at the interface can be tuned by controlling the interface-to-volume ratio of the nanocomposites. Photoinduced carrier injection driven by visible light was detected across the nanocomposites. This work shows the charge interaction of the vertically integrated multiheterostructures by incorporating a controllable interface-to-volume ratio, which is essential for optimization of the design and functionality of electronic devices.

Looking foward to the future where the device becomes flexible and rollable, indium tin oxide (ITO) fabricated on the plastic substrate becomes indispensable. Metallization on the ITO plastic substrate is an essential and required process. Electroplating is a cost-effective and high-throughput metallization process; however, the poor surface coverage and interfacial adhesion between electroplated metal and ITO plastic substrate limits its applications. This paper develops a new method to directly electroplate metals having strong adhesion and uniform deposition on an ITO plastic substrate by using a combination of 3-mercaptopropyl-trimethoxysilane (MPS) self-assembled monolayers (SAMs) and a sweeping potential technique. An impedance capacitive analysis supports the proposed bridging link model for MPS SAMs at the interface between the ITO and the electrolyte.

Electrically induced reversible reactions between ferrocene (Fc) and β-cyclodextrin (β-CD) groups have been utilized for preparation of poly(tetrafluoroethylene) (PTFE) membranes exhibiting electrically driven biofouling release properties. PTFE membrane is surface-modified with polymer chains possessing Fc pendant groups. The surface layer is then cross-linked with a difunctional β-CD compound by means of the Fc/β-CD complexation reaction. The electrically induced reversibly cross-linking and de-cross-linking behaviors of the surface layer of the modified PTFE membrane have been characterized with Fourier transform Infrared, X-ray photoelectron spectroscopy, and scanning electron microscopy. The surface-modified PTFE membrane has been fouled with protein absorption. Electrical treatment of the fouled membrane results in a protein detachment from the membrane surface driven by the surface structure change accompanied with the electrically induced de-cross-linking reaction of the Fc/β-CD linkages. A smart membrane exhibiting a novel cleaning technology for membrane fouling has been developed.

Development of bioinert membranes to prevent blood clotting, tissue adhesion, and bacterial attachment is important for the wound healing process. In this work, two wound-contacting membranes of expanded poly(tetrafluoroethylene) (ePTFE) grafted with zwitterionic poly(sulfobetaine methacrylate) (PSBMA) and hydrophilic poly(ethylene glycol) methacrylate (PEGMA) via atmospheric plasma-induced surface copolymerization were studied. The surface grafting chemical structure, hydrophilicity, and hydration capability of the membranes were determined to illustrate the correlations between bioadhesive properties and wound recovery of PEGylated and zwitterionic ePTFE membranes. Bioadhesive properties of the membranes were evaluated by the plasma protein adsorption, platelet activation, blood cell hemolysis, tissue cell adhesion, and bacterial attachment. It was found that the zwitterionic PSBMA-grafted ePTFE membrane presented high hydration capability and exhibited the best nonbioadhesive character in contact with protein solution, human blood, tissue cells, and bacterial medium. This work shows that zwitterionic membrane dressing provides a moist environment, essential for "deep" skin wound healing observed from the animal rat model in vivo and permits a complete recovery after 14 days, with histology of repaired skin similar to that of normal skin tissue. This work suggests that the bioinert nature of grafted PSBMA polymers obtained by controlling grafting structures gives them great potential in the molecular design of antibioadhesive membranes for use in skin tissue regeneration.

In this work, the hemocompatibility of zwitterionic polypropylene (PP) fibrous membranes with varying grafting coverage of poly(sulfobetaine methacrylate) (PSBMA) via plasma-induced surface polymerization was studied. Charge neutrality of PSBMA-grafted layers on PP membrane surfaces was controlled by the low-pressure and atmospheric plasma treatment in this study. The effects of grafting composition, surface hydrophilicity, and hydration capability on blood compatibility of the membranes were determined. Protein adsorption onto the different PSBMA-grafted PP membranes from human fibrinogen solutions was measured by enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies. Blood platelet adhesion and plasma clotting time measurements from a recalcified platelet-rich plasma solution were used to determine if platelet activation depends on the charge bias of the grafted PSBMA layer. The charge bias of PSBMA layer deviated from the electrical balance of positively and negatively charged moieties can be well-controlled via atmospheric plasma-induced interfacial zwitterionization and was further tested with human whole blood. The optimized PSBMA surface graft layer in overall charge neutrality has a high hydration capability and keeps its original blood-inert property of antifouling, anticoagulant, and antithrmbogenic activities when it comes into contact with human blood. This work suggests that the hemocompatible nature of grafted PSBMA polymers by controlling grafting quality via atmospheric plasma treatment gives a great potential in the surface zwitterionization of hydrophobic membranes for use in human whole blood.

Zwitterionic sulfobetaine methacrylate (SBMA) polymers were known to possess excellent antifouling properties due to high hydration capacity and neutral charge surface. In this study, copolymers of SBMA and acrylic acid (AA) with a variety of compositions were synthesized and were immobilized onto polymeric substrates with layer-by-layer polyelectrolyte films via electrostatic interaction. The amounts of platelet adhesion and fibrinogen adsorption were determined to evaluate hemocompatibility of poly(SBMA-co-AA)-modified substrates. Among various deposition conditions by modulating SBMA ratio in the copolymers and pH of the deposition solution, poly(SBMA(56)-co-AA(44)) deposited at pH 3.0 possessed the best hemocompatibility. This work demonstrated that poly(SBMA-co-AA) copolymers adsorbed on polyelectrolyte-base films via electrostatic interaction improve hemocompatibility effectively and are applicable for various substrates including TCPS, PU, and PDMS. Furthermore, poly(SBMA-co-AA)-coated substrate possesses great durability under rigorous conditions. The preliminary hemocompatibility tests regarding platelet adhesion, fibrinogen adsorption, and plasma coagulation suggest the potential of this technique for the application to blood-contacting biomedical devices.

In this work, the hemocompatibility of PEGylated poly(vinylidene fluoride) (PVDF) microporous membranes with varying grafting coverage and structures via plasma-induced surface PEGylation was studied. Network-like and brush-like PEGylated layers on PVDF membrane surfaces were achieved by low-pressure and atmospheric plasma treatment. The chemical composition, physical morphology, grafting structure, surface hydrophilicity, and hydration capability of prepared membranes were determined to illustrate the correlations between grafting qualities and hemocompatibility of PEGylated PVDF membranes in contact with human blood. Plasma protein adsorption onto different PEGylated PVDF membranes from single-protein solutions and the complex medium of 100% human plasma were measured by enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies. Hemocompatibility of the PEGylated membranes was evaluated by the antifouling property of platelet adhesion observed by scanning electron microscopy (SEM) and the anticoagulant activity of the blood coagulant determined by testing plasma-clotting time. The control of grafting structures of PEGylated layers highly regulates the PVDF membrane to resist the adsorption of plasma proteins, the adhesion of platelets, and the coagulation of human plasma. It was found that PVDF membranes grafted with brush-like PEGylated layers presented higher hydration capability with binding water molecules than with network-like PEGylated layers to improve the hemocompatible character of plasma protein and blood platelet resistance in human blood. This work suggests that the hemocompatible nature of grafted PEGylated polymers by controlling grafting structures gives them great potential in the molecular design of antithrombogenic membranes for use in human blood.

Development of nonfouling membranes to prevent nonspecific protein adsorption and platelet adhesion is critical for many biomedical applications. It is always a challenge to control the surface graft copolymerization of a highly polar monomer from the highly hydrophobic surface of a fluoropolymer membrane. In this work, the blood compatibility of poly(vinylidene fluoride) (PVDF) membranes with surface-grafted electrically neutral zwitterionic poly(sulfobetaine methacrylate) (PSBMA), from atmospheric plasma-induced surface copolymerization, was studied. The effect of surface composition and graft morphology, electrical neutrality, hydrophilicity and hydration capability on blood compatibility of the membranes were determined. Blood compatibility of the zwitterionic PVDF membranes was systematically evaluated by plasma protein adsorption, platelet adhesion, plasma-clotting time, and blood cell hemolysis. It was found that the nonfouling nature and hydration capability of grafted PSBMA polymers can be effectively controlled by regulating the grafting coverage and charge balance of the PSBMA layer on the PVDF membrane surface. Even a slight charge bias in the grafted zwitterionic PSBMA layer can induce electrostatic interactions between proteins and the membrane surfaces, leading to surface protein adsorption, platelet activation, plasma clotting and blood cell hemolysis. Thus, the optimized PSBMA surface graft layer in overall charge neutrality has a high hydration capability and the best antifouling, anticoagulant, and antihemolytic activities when comes into contact with human blood., (© 2011 American Chemical Society)

In this study, Doppler broadening energy spectroscopy (DBES) combined with slow positron beam was used to discuss the effect of substrate types on the fine structure of a plasma-polymerized SiOCH layer as a function of depth. From the SEM pictures, the SiOCH films formed on different substrates showed hemispherical macrostructures, and the deposition rate was dependent on the mean pore size. It appears that the morphology of the plasma-polymerized SiOCH films was associated with the porosity-related characteristics of the substrate such as the size/shape of pores. As deposited on the MCE-022 substrate (mixed cellulose esters membrane with a mean pore size of 0.22 μm) with a nodular structure, the SiOCH films had pillar-like structures and high gas permeabilities. DBES results showed that the SiOCH films deposited on different substrates were composed of three layers: the SiOCH bulk layer, the transition layer, and the substrate. It was observed that the microstructure of the SiOCH films was affected layer by layer; a higher surface pore size in the substrates induced thicker transition layers with higher microporosities and led to thinner bulk layers having higher S parameter values during the plasma polymerization. It was also observed that the change in O(2)/N(2) selectivity was consistent with the DBES analysis results. The gas separation performance and DBES analysis results agreed with each other.

Ordered nanoporous silica films have attracted great interest for their potential use to template nanowires for photovoltaics and thermoelectrics. However, it is crucial to develop films such that an electrode under the nanoporous film is accessible to solution species via facile mass transport through well-defined pores. Here, we quantitatively measure the electrode accessibility and the effective species diffusivity for nearly all the known nanoporous silica film structures formed by evaporation-induced self-assembly upon dip-coating or spin-coating. Grazing-angle of incidence small-angle X-ray scattering was used to verify the nanoscale structure of the films and to ensure that all films were highly ordered and oriented. Electrochemical impedance spectroscopy (EIS) was then used to assess the transport properties. A model has been developed that separates the electrode/film kinetics and the film transport properties from the film/solution interface and bulk solution effects. Accounting for this, the accessible area of the nanoporous film coated FTO electrode (1-theta) is obtained from the high-frequency data, while the effective diffusivity of the ferrocene dimethanol (D(FDM)) redox couple is obtained from intermediate frequencies. It was found that the degree of order and orientation in the film, in addition to the symmetry/topology, is a dominant factor that determines these two key parameters. The EIS data show that the (211) oriented double gyroid, (110) oriented distorted body center cubic, and (211) distorted primitive cubic silica films have significant accessibility (larger than 26% of geometric area). However, the double-gyroid films showed the highest diffusivity by over an order of magnitude. Both the (10) oriented 2D hexagonal and (111) oriented rhombohedral films were found to be highly blocking with only small accessibility due to microporosity. The impedance data were also collected to study the stability of the nanoporous silica films in aqueous solutions as a function of pH. The distorted primitive silica film showed much faster degradation in pH 7 solution when compared to a blocking film such as the 2D hexagonal. However, silica films maintained their structure at pH 2 for at least 12 h.

Impedance spectroscopy was used to investigate ion transport in the microporous crystalline framework titanosilicate ETS-10 in the frequency range from 1 Hz to 10 MHz. These data were compared to measured data from the microporous aluminosilicate zeolite X. Na-ETS-10 was found to have a lower activation energy for ion conduction than that of NaX, 58.5 kJ/mol compared to 66.8 kJ/mol. However, the dc conductivity and ion hopping rate for Na-ETS-10 were also lower than NaX. This was found to be due to the smaller entropy contribution in Na-ETS-10 because of its high cation site occupancy. This was verified by ion exchanging Na(+) with Cu(2+) in both microporous frameworks. This exchange decreases the cation site occupancy and reduces correlation effects. The exchanged Cu-ETS-10 was found to have both lower activation energy and higher ionic conductivity than CuX. Zeolite X has the highest ion conductivity among the zeolites, and thus the data shown here indicate that ETS-10 has more facile transport of higher valence cations which may be important for ion-exchange, environmental remediation of radionucleotides, and nanofabrication.

A method to calculate the location of all Bragg diffraction peaks from nanostructured thin films for arbitrary angles of incidence from just above the critical angle to transmission perpendicular to the film is reported. At grazing angles, the positions are calculated using the distorted wave Born approximation (DWBA), whereas for larger angles where the diffracted beams are transmitted though the substrate, the Born approximation (BA) is used. This method has been incorporated into simulation code (called NANOCELL) and may be used to overlay simulated spot patterns directly onto two-dimensional (2D) grazing angle of incidence small-angle X-ray scattering (GISAXS) patterns and 2D SAXS patterns. The GISAXS simulations are limited to the case where the angle of incidence is greater than the critical angle (alpha(i) > alpha(c)) and the diffraction occurs above the critical angle (alpha(f) > alpha(c)). For cases of surfactant self-assembled films, the limitations are not restrictive because, typically, the critical angle is around 0.2 degrees but the largest d spacings occur around 0.8 degrees 2theta. For these materials, one finds that the DWBA predicts that the spot positions from the transmitted main beam deviate only slightly from the BA and only for diffraction peaks close the critical angle. Additional diffraction peaks from the reflected main beam are observed in GISAXS geometry but are much less intense. Using these simulations, 2D spot patterns may be used to identify space group, identify the orientation, and quantitatively fit the lattice constants for SAXS data from any angle of incidence. Characteristic patterns for 2D GISAXS and 2D low-angle transmission SAXS patterns are generated for the most common thin film structures, and as a result, GISAXS and SAXS patterns that were previously difficult to interpret are now relatively straightforward. The simulation code (NANOCELL) is written in Mathematica and is available from the author upon request.

We have succeeded in the fabrication of distorted cubic R-3m mesoporous silica film with 3D open mesostructure providing high pore accessibility from the surface-air interface of the film. The film fabrication involves a unique approach of adding 1,3,5- triisopropylbenzene (TIPB) to the silica/cetyltrimethylammoniumbromide (CTAB) coating sol during its preparation. The addition of TIPB induces the formation of spheroid micelles, promoting R-3m mesostructure in the film. This phase does not exist in the corresponding binary phase diagram of CTAB surfactant.