Search

In this work, we present a novel small molecule based on dithienylthienothiadiazole units (named SM1) acting as an efficient component in ternary blend organic solar cells to modify the hole extraction at the interface. Our findings show that the SM1 suppresses the surface recombination and enhances the open-circuit voltage ( V oc ). By introducing SM1 in a host system composed of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl- C 61 -butyric acid methyl ester (PCBM), we obtained V oc values of up to 0.75 V and fill factors larger than 70% for the ternary blends. As a consequence, the power conversion efficiency is improved by about 30% compared to P3HT:PCBM binary devices. Interestingly, external quantum efficiency and absorption spectra in the near-infrared region do not show any contribution of SM1 in dried films. Instead, the addition of the small molecule improves the V oc by reducing the surface recombination losses. To shed light on the recombination processes, we carried out Fourier-transform photocurrent spectroscopy and impedance spectroscopy measurements. This work shows that the ternary concept can also have functionalities other than photosensitization and can even act as a morphology-directing agent or an interface modifier.

We present here a series of wide-band-gap ( E g : >1.8 eV) polymer donors by incorporating thiophene-flanked phenylene as an electron-donating unit and quinoxaline as an electron-accepting co-unit to attain large open-circuit voltages ( V oc s) and short-circuit currents ( J sc s) in nonfullerene organic solar cells (OSCs). Fluorination was utilized to fine-tailor the energetics of polymer frontier molecular orbitals (FMOs) by replacing a variable number of H atoms on the phenylene moiety with F. It was found that fluorination can effectively modulate the polymer backbone planarity through intramolecular noncovalent S···F and/or H···F interactions. Polymers (P2-P4) show an improved molecular packing with a favorable face-on orientation compared to their nonfluorinated analogue (P1), which is critical to charge carrier transport and collection. When mixed with IDIC, a nonfullerene acceptor, P3 with two F atoms, achieves a remarkable V oc of 1.00 V and a large J sc of 15.99 mA/cm 2 , simultaneously, yielding a power-conversion efficiency (PCE) of 9.7%. Notably, the 1.00 V V oc is among the largest values in the IDIC-based OSCs, leading to a small energy loss ( E loss : 0.62 eV) while maintaining a large PCE. The P3:IDIC blend shows an efficient exciton dissociation through hole transfer even under a small energy offset of 0.16 eV. Further fluorination leads to the polymer P4 with increased chain-twisting and mismatched FMO levels with IDIC, showing the lowest PCE of 2.93%. The results demonstrate that quinoxaline-based copolymers are promising donors for efficient OSCs and the fluorination needs to be fine-adjusted to optimize the interchain packing and physicochemical properties of polymers. Additionally, the structure-property correlations from this work provide useful insights for developing wide-band-gap polymers with low-lying highest occupied molecular orbitals to minimize E loss and maximize V oc in nonfullerene OSCs for efficient power conversion.

Herein, the open-circuit voltage (V OC ) loss in both polymer solar cells and perovskite solar cells is quantitatively analyzed by measuring the temperature dependence of V OC to discuss the difference in the primary loss mechanism of V OC between them. As a result, the photon energy loss for polymer solar cells is in the range of about 0.7-1.4 eV, which is ascribed to temperature-independent and -dependent loss mechanisms, while that for perovskite solar cells is as small as about 0.5 eV, which is ascribed to a temperature-dependent loss mechanism. This difference is attributed to the different charge generation and recombination mechanisms between the two devices. The potential strategies for the improvement of V OC in both solar cells are further discussed on the basis of the experimental data.