Search

This paper describes hollow fiber sorbents made of the parent polymer of intrinsic microporosity, PIM-1, using a spinning method designed to control the formation of dense barrier layers followed b...

Iodine radioisotopes released during nuclear fuel reprocessing must be removed from the off-gas stream before discharge. One promising material for iodine capture is reduced silver mordenite (Ag0Z). Nevertheless, the adsorbent's capacity will degrade, or age, over time when the material is exposed to other off-gas constituents. Though the overall impact of aging is known, the underlying physical and chemical processes are not. To examine these processes, Ag0Z samples were prepared and aged in 2% NO2 in dry air and in 1% NO in N2 gas streams at 150 °C for up to six months. Aged samples were then characterized using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray absorption spectroscopy. These techniques show that aging involves two overarching processes: (i) oxidation of the silver nanoparticles present in Ag0Z and (ii) migration of oxidized silver into the mordenite's inner network. Silver on the nanoparticle's surface is oxidized through adsorption of O2, NO, and NO2. Raman spectroscopy and X-ray absorption spectroscopy indicate that nitrates are the primary products of this adsorption. Most of these nitrates migrate into the interior of the mordenite and exchange at framework binding sites, returning silver to its unreduced state (AgZ). The remaining nitrates exist at a persistent concentration without aggregating into bulk-phase AgNO3. X-ray absorption spectroscopy results further indicate that iodine adsorption occurs on not just Ag0Z but also on AgZ and a portion of the nitrates in the system. AgZ adsorbs a sizable quantity of iodine early in the aging process, but its capacity drops rapidly over time. For well-aged samples, nitrates are responsible for up to 95% of mordenite's iodine capacity. These results have enhanced our understanding of the aging process in silver mordenite and are expected to guide the development of superior adsorbents for the capture of radioactive iodine from reprocessing off-gas.

To move nuclear as a primary energy source, uranium resources must be secured beyond what terrestrial reserves can provide. Given the vast quantity of uranium naturally found in the ocean, adsorbent materials have been investigated to recover this vital fuel source. Amidoxime (AO) has been found to be the state-of-the-art functional group for this purpose, however, improvements must still be made to overcome the issues with selectively capturing uranium at such a low concentration found in the ocean. Herein, we report PAF-1 as a platform to study the effects of two amidoxime ligands. The synthesized adsorbents, PAF-1-CH2NHAO and PAF-1-NH(CH2)2AO, with varying chain lengths and grafting degrees, were investigated for their uranium uptakes and kinetic efficiency. PAF-1-NH(CH2)2AO was found to outperform PAF-1-CH2NHAO, with a maximum uptake capacity of 385 mg/g and able to reduce a uranium-spiked solution to ppb level within 10 min. Further studies with PAF-1-NH(CH2)2AO demonstrated effective elution for multiple adsorption cycles and showed promising results for uranium recovery in the diverse composition of a spiked seawater solution. The work presented here moves forward design principles for amidoxime-functionalized ligands and provides scope for strategies to enhance the capture of uranium as a sustainable nuclear fuel source.

Porous catalysts have garnered substantial interest as potential platforms for group-transfer catalysis due to the ability to noncovalently colocalize substrates in proximity to site-isolated react...

The amidoxime group (−RNH2NOH) has long been used to extract uranium from seawater on account of its high affinity toward uranium. The development of tunable sorbent materials for uranium sequestration remains a research priority as well as a significant challenge. Herein, we report the design, synthesis, and uranium sorption properties of bis-amidoxime-functionalized polymeric materials (BAP 1–3). Bifunctional amidoxime monomers were copolymerized with an acrylamide cross-linker to obtain bis-amidoxime incorporation as high as 2 mmol g–1 after five synthetic steps. The resulting sorbents were able to uptake nearly 600 mg of uranium per gram of polymer after 37 days of contact with a seawater simulant containing 8 ppm uranium. Moreover, the polymeric materials exhibited low vanadium uptake with a maximum capacity of 128 mg of vanadium per gram of polymer. This computationally predicted and experimentally realized selectivity of uranium over vanadium, nearly 5 to 1 w/w, is one of the highest reported to da...

Recent research has revealed molecular structure beyond the inner coordination sphere is essential in defining the performance of separation processes; nevertheless, such structure remains largely unexplored. Here we apply small-angle neutron scattering (SANS) and X-ray absorption fine structure (XAFS) spectroscopy to investigate the structure of an ionic liquid system studied for f-block element separations. SANS data reveal dramatic changes in the ionic liquid microstructure (∼150 Å) which we demonstrate can be controlled by judicious selection of counterion. Mesoscale structural features (500 Å) are also observed as a function of metal concentration. XAFS analysis supports formation of extended aggregate structures, similar to those observed in traditional solvent extraction processes, and suggests additional parallels may be drawn from further study. Achieving precise tunability over the intermediate features is an important development in controlling mesoscale structure and realizing advanced new forms of soft matter.

Capture of radioactive iodine is a significant consideration during reprocessing of spent nuclear fuel and disposal of legacy wastes. While silver-exchanged mordenite (AgZ) is widely regarded as a benchmark material for assessing iodine adsorption performance, previous research efforts have largely focused on bulk material properties rather than the underpinning molecular interactions that achieve effective iodine capture. As a result, the fundamental understanding necessary to identify and mitigate deactivation pathways for the recycle of AgZ is not available. We applied X-ray Absorption Fine Structure (XAFS) spectroscopy to investigate AgZ following activation, adsorption of iodine, regeneration, and recycle, observing no appreciable degradation in performance due to the highly controlled conditions under which the AgZ was maintained. Fits of the extended XAFS (EXAFS) data reveal complete formation of Ag0 nanoparticles upon treatment with H2, and confirm the formation of α-AgI within the mordenite chann...

An ultrastable Au nanocatalyst based on a heterostructured perovskite support with high surface area and uniform LaFeO3 nanocoatings was successfully synthesized and tested for CO oxidation. Strikingly, small Au nanoparticles (4–6 nm) are obtained after calcination in air at 700 °C and under reaction conditions. The designed Au catalyst not only possessed extreme sintering resistance but also showed high catalytic activity and stability because of the strong interfacial interaction between Au and the heterostructured perovskite support.

We demonstrate the successful functionalization of a porous aromatic framework for uranium extraction from water as exemplified by grafting PAF-1 with the uranyl chelating amidoxime group. The resultant amidoxime-functionalized PAF-1 (PAF-1-CH2AO) exhibits a high uranium uptake capacity of over 300 mg g–1 and effectively reduces the uranyl concentration from 4.1 ppm to less than 1.0 ppb in aqueous solutions within 90 min, well below the acceptable limit of 30 ppb set by the US Environmental Protection Agency. The local coordination environment of uranium in PAF-1-CH2AO is revealed by X-ray absorption fine structure spectroscopic studies, which suggest the cooperative binding between UO22+ and adjacent amidoxime species.

An in situ doping strategy has been developed for the generation of a novel family of hexaazatriphenylene-based conjugated triazine frameworks (CTFs) for efficient CO2 capture. The resulting task-specific materials exhibit an exceptionally high CO2 uptake capacity (up to 4.8 mmol g(-1) at 297 K and 1 bar). The synergistic effects of ultrananoporosity and rich N/O codoped CO2-philic sites bestow the framework with the highest CO2 adsorption capacity among known porous organic polymers (POPs). This innovative approach not only enables superior CO2 separation performance but also provides tunable control of surface features on POPs, thereby affording control over bulk material properties. We anticipate this novel strategy will facilitate new possibilities for the rational design and synthesis of nanoporous materials for carbon capture.

Informed by density functional theory calculations, a novel bifunctional chelator, (Z)-2-[2-(N′-hydroxycarbamimidoyl)phenoxy]benzoic acid, was designed and synthesized for ultrahigh uranium uptake from seawater. Investigation of the ligand for uranium sorption was conducted in artificial seawater (pH = 8.2). An exceptional uranium uptake of 553 mg of uranium (g of sorbent)−1 was obtained with a theoretical saturation capacity of 710 mg g–1 obtained by fitting isotherm data with the Langmuir–Freundlich model. The resulting yellow precipitate was characterized via X-ray absorption fine structure (XAFS) at the U LIII-edge, with the extended XAFS spectra best fitted by a model where uranyl is coordinated by monodentate amidoxime, one chelating carboxylic acid, and two water molecules. These results are consistent with the formation of a uranium coordination polymer. The ultrahigh uranium uptake capacity obtained by the bifunctional chelating ligand makes it a promising candidate for deployment as a uranium ad...

In order to ensure a sustainable reserve of fuel for nuclear power generation, tremendous research efforts have been devoted to developing advanced sorbent materials for extracting uranium from seawater. In this work, a porous aromatic framework (PAF) was surface-functionalized with poly(acrylonitrile) through atom-transfer radical polymerization (ATRP). Batches of this adsorbent were conditioned with potassium hydroxide (KOH) at room temperature or 80 °C prior to contact with a uranium-spiked seawater simulant, with minimal differences in uptake observed as a function of conditioning temperature. A maximum capacity of 4.81 g-U/kg-ads was obtained following 42 days contact with uranium-spiked filtered environmental seawater, which demonstrates a comparable adsorption rate. A kinetic investigation revealed extremely rapid uranyl uptake, with more than 80% saturation reached within 14 days. Relying on the semiordered structure of the PAF adsorbent, density functional theory (DFT) calculations reveal coopera...

A robust and porous Zr metal-organic framework, sal-MOF, of UiO topology was synthesized using a salicylaldimine (sal)-derived dicarboxylate bridging ligand. Postsynthetic metalation of sal-MOF with iron(II) or cobalt(II) chloride followed by treatment with NaBEt3H in THF resulted in Fe- and Co-functionalized MOFs (sal-M-MOF, M = Fe, Co) which are highly active solid catalysts for alkene hydrogenation. Impressively, sal-Fe-MOF displayed very high turnover numbers of up to 145000 and was recycled and reused more than 15 times. This work highlights the unique opportunity of developing MOF-based earth-abundant catalysts for sustainable chemical synthesis.

Innovative solid-phase sorbent technologies are needed to extract radionuclides from harsh media for environmental remediation and in order to close the nuclear fuel cycle. Highly porous inorganic materials with remarkable sorptive properties have been prepared by topotactic transformations of metal–organic frameworks (MOFs) using both basic and acidic solutions. Treatment of Ti and Zr nanoMOFs with NaOH, Na3PO4, and H3PO4 yields Ti and Zr oxides, oxyphosphates, and phosphates via sacrificial removal of the organic ligands. This controlled ligand extraction process results in porous inorganic materials, which preserve the original MOF morphologies and impart useful surface functionalities, but are devoid of organic linkers. Structural investigation by X-ray absorption spectroscopy reveals preservation of the coordination environment of the scattering metal. Changing the MOF template introduces different metal and structural possibilities, while application of different digest solutions allows preparation ...

A series of functionalized mesoporous carbon (MC) materials were prepared by covalent grafting with amidoxime, carboxyl, and phosphoryl functional groups and screened for uranium (U) sorption from aqueous media. The MC materials were characterized by nitrogen adsorption measurements and thermogravimetric analysis and investigated for U(VI) extraction from both acidic water (pH 4) and artificial seawater (pH 8.2). Under both conditions, a phosphoric acid-functionalized MC exhibited the highest U(VI) sorption, with a maximum sorption capacity of 97 mg of U(VI)/(g of sorbent) in acidic water and 67 mg of U(VI)/(g of sorbent) in artificial seawater. The effects of pH on U(VI) sorption, sorption kinetics, and sorption isotherms were obtained for the phosphoric acid-functionalized MC. Quantitative U(VI) removal from U(VI)-loaded sorbents was achieved by washing with HCl at concentrations higher than 0.01 M. These results indicate that functionalized MC provides a promising platform for the development of novel ...

A novel immunomagnetic method has been developed for the simultaneous measurement of organophosphorus nerve agent (OPNA) adducts to butyrylcholinesterase (BuChE) and free OPNAs in serum. This new approach, deemed dual-mode immunomagnetic analysis (Dual-Mode IMA), combines immunomagnetic separation (IMS) and immunomagnetic scavenging (IMSc) and has been used to measure the effectiveness of cholinesterase reactivators on OPNA-inhibited BuChE in serum. BuChE inhibited by the nerve agent VX, uninhibited BuChE, and unbound VX were measured up to 1 h after the addition of oxime reactivators pralidoxime (2-PAM) and obidoxime. IMS experiments consisted of extracting BuChE and VX-BuChE serum adducts using antibutyrylcholinesterase monoclonal antibodies conjugated to protein-G ferromagnetic particles. In a parallel set of experiments using IMSc, BuChE-coated magnetic beads were used to extract free VX from protein-depleted serum. Adducts from both IMS and IMSc were analyzed using a published IMS liquid chromatography tandem mass spectrometry (IMS-LC-MS/MS) protocol, which has also been demonstrated with other OPNAs. By applying this Dual-Mode IMA approach, 2-PAM was observed to be more potent than obidoxime in reactivating VX-adducted BuChE. VX-BuChE peptide concentrations initially measured at 19.7 ± 0.7 ng/mL decreased over 1 h to 10.6 ± 0.6 ng/mL when reactivated with 2-PAM and 14.4 ± 1.2 ng/mL when reactivated with obidoxime. These experiments also show that previously published IMS-LC-MS/MS analyses are compatible with serum treated with oximes. Dual-Mode IMA is the first immunoaffinity method developed for the simultaneous measurement of OPNA adducted BuChE, unadducted BuChE, and free nerve agent in serum and is a promising new tool for studying reactivator effectiveness on cholinesterases inhibited by nerve agents.