Search

Rapid, yet accurate and sensitive testing has been shown to be critical in the control of spreading pandemic diseases such as COVID-19. Current methods which are highly sensitive and can differentiate different strains are slow and cannot be conveniently applied at the point of care. Rapid tests, meanwhile, require a high titer and are not sufficiently sensitive to discriminate between strains. Here, we report a rapid and facile potentiometric detection method based on nanoscale, three-dimensional molecular imprints of analytes on a self-assembled monolayer (SAM), which can deliver analyte-specific detection of both whole virions and isolated proteins in microliter amounts of bodily fluids within minutes. The detection substrate with nanoscale inverse surface patterns of analytes formed by a SAM identifies a target analyte by recognizing its surface nano- and molecular structures, which can be monitored by temporal measurement of the change in substrate open-circuit potential. The sensor unambiguously detected and differentiated H1N1 and H3N2 influenza A virions as well as the spike proteins of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and Middle-East respiratory syndrome (MERS) coronavirus in human saliva with limits of detection reaching 200 PFU/mL and 100 pg/mL for the viral particles and spike proteins, respectively. The demonstrated speed and specificity of detection, combined with a low required sample volume, high sensitivity, ease of potentiometric measurement, and simple sample collection and preparation, suggest that the technique can be used as a highly effective point-of-care diagnostic platform for a fast, accurate, and specific detection of various viral pathogens and their variants.

Organic–inorganic halide perovskites feature excellent optoelectronic properties but poor chemical stability. While passivating perovskite grain boundary (GB) by polymers shows prospects on long-te...

Organic-inorganic hybrids featuring tunable material properties can be readily generated by applying vapor- or liquid-phase infiltration (VPI or LPI) of inorganic materials into organic templates, with resulting properties controlled by type and quantity of infiltrated inorganics. While LPI offers more diverse choices of infiltratable elements, it tends to yield smaller infiltration amount than VPI, but the attempt to address the issue has been rarely reported. Here, we demonstrate a facile temperature-enhanced LPI method to control and drastically increase the quantity and kinetics of Pt infiltration into self-assembled polystyrene

We here report that adsorbed chains composed of one of the constituent blocks can be used as a new surface modification approach to induce perpendicularly oriented lamellar microdomains in block copolymer thin films. A nearly symmetric polystyrene-block-poly(methyl methacrylate) (PS-block-PMMA) diblock copolymer was used as a model. Densely packed PS- or PMMA-adsorbed chains of about 2–3 nm in thickness (“polymer nanocoatings”) were deposited on silicon (Si) substrates using a solvent-rinsing approach. Spin-cast films of 40 or 60 nm-thick PS-block-PMMA (equivalent to two or three interdomain spacings) were subsequently deposited onto the PS or PMMA nanocoatings. Grazing incidence small-angle X-ray scattering experiments revealed the formation of perpendicularly oriented lamellar microdomains within the entire films at 200 °C, where balanced interfacial interactions at the polymer–air interface were achieved. Additionally, X-ray photon correlation spectroscopy studies demonstrated the dynamics of the fully...

In situ wide-angle X-ray scattering together with infrared imaging was performed during three-dimensional material extrusion printing and correlated with the development of the crystalline structur...

We have adapted the two-phase Brust method to synthesize large quantities of AuPd alloy nanoparticles with diameter of 1.86 ± 0.40 nm. When the particles were spread at the air/water interface of a Langmuir–Blodgett (LB) trough, they exhibited a distinct pressure area isotherm curve. The X-ray reflectivity (XRR) shows the formation of an incompressible monolayer with uniform thickness of 1.16 ± 0.02 nm at low pressures which collapses to form a second layer with 2.13 nm thickness at higher pressures. High resolution transmission electron microscopy (HRTEM) imaging of the monolayer indicates that the particles are highly crystalline, with well-defined atomic planes and self-assembly into a hexagonal structure. Extended X-ray absorption fine structure (EXAFS) analysis of the LB lift-off films only shows Au–Au and Au–Pd configurations, consistent with the formation of random alloy rather than core–shell structure. When the particle monolayer was lifted onto the Nafion membrane of a proton exchange membrane f...

We here report the self-organization process of poly(styrene-b-ethylene/butadiene-b-styrene) (SEBS) triblock copolymer chains physically adsorbed on a non-neutral surface. Spin-cast SEBS thin films were prepared on silicon (Si) substrates and then annealed at a high temperature far above the bulk glass transition temperatures of the two constituent blocks. To reveal the buried interfacial structure, we utilized solvent rinsing processes and a suite of surface-sensitive techniques including ellipsometry, X-ray reflectivity, atomic force microscopy, and grazing incidence small angle X-ray scattering. We revealed that the SEBS chains form two different chain structures on the substrate simultaneously: (i) “flattened chains” with the average height of 2.5 nm but without forming microdomain structures; (ii) “loosely adsorbed chains” with the average height of 11.0 nm and the formation of perpendicularly oriented cylindrical microdomains to the substrate surface. In addition, the kinetics to form the perpendicular-oriented cylinder was sluggish (∼200 h) and proceeded via multistep processes toward the equilibrium state. We also found that the lateral microdomain structures were distorted, and the characteristic lengths of the microdomains were slightly different from the bulk even after reaching “quasiequilibrium” state within the observed time window. Furthermore, we highlight the vital role of the adsorbed chains in the self-assembling process of the entire SEBS thin film: a long-range perturbation associated with the adsorbed chains propagates into the film interior, overwhelming the free surface effect associated with surface segregation of the lower surface tension of polystyrene blocks.

Oxygen and water vapor sensing properties are investigated in metal-oxide-hybrid polymer nanocomposite thin films generated by infiltration synthesis, which incorporates molecular ZnO into the matrix of SU-8 polymer, a common negative-tone photoresist. The hybrid thin films display 20-fold higher gravimetric responses to oxygen and water vapor than those of control ZnO thin films in the dark. An additional 50-500% enhanced responses are detected under UV irradiation. The overall enhanced gravimetric response in the hybrid film is attributed to the ZnO molecules distributed in the polymer matrix, whereas the UV enhancement is explained by the light-induced, reversible generation of hydrophilic fluoroantimonic acid from triarylsulfonium hexafluoroantimonate photoacids, which leads to the increased surface potential and adsorption energies for oxygen and water. A gravimetric sensor based on a series of ZnO-infiltrated SU-8 films under UV excitation enables 96% accurate classification of water and oxygen environment with sub 10 mTorr detection limits. The results demonstrate UV-induced fully reversible surface hydrophilicity of ZnO/SU-8 hybrid nanocomposites.

Solution-processable organic semiconductors have potentials as visible photoelectrochemical (PEC) water splitting photoelectrodes due to their tunable small band gap and electronic energy levels, but they are typically limited by poor stability and photocatalytic activity. Here, we demonstrate the direct visible PEC water oxidation on solution-processed organic semiconductor thin films with improved stability and performance by ultrathin metal oxide passivation layers. N-type fullerene-derivative thin films passivated by sub-2 nm ZnO via atomic layer deposition enabled the visible PEC water oxidation at wavelengths longer than 600 nm in harsh alkaline electrolyte environments with up to 30 μA/cm2 photocurrents at the thermodynamic water-oxidation equilibrium potential and the photoanode half-lifetime extended to ∼1000 s. The systematic investigation reveals the enhanced water oxidation catalytic activity afforded by ZnO passivation and the charge tunneling governing the hole transfer through passivation l...

Patterning materials efficiently at the smallest length scales is a longstanding challenge in nanotechnology. Electron-beam lithography (EBL) is the primary method for patterning arbitrary features, but EBL has not reliably provided sub-4 nm patterns. The few competing techniques that have achieved this resolution are orders of magnitude slower than EBL. In this work, we employed an aberration-corrected scanning transmission electron microscope for lithography to achieve unprecedented resolution. Here we show aberration-corrected EBL at the one nanometer length scale using poly(methyl methacrylate) (PMMA) and have produced both the smallest isolated feature in any conventional resist (1.7 ± 0.5 nm) and the highest density patterns in PMMA (10.7 nm pitch for negative-tone and 17.5 nm pitch for positive-tone PMMA). We also demonstrate pattern transfer from the resist to semiconductor and metallic materials at the sub-5 nm scale. These results indicate that polymer-based nanofabrication can achieve feature sizes comparable to the Kuhn length of PMMA and ten times smaller than its radius of gyration. Use of aberration-corrected EBL will increase the resolution, speed, and complexity in nanomaterial fabrication.

We report the effects of compressed CO, molecules as a novel plasticization agent for poly(3-hexylthiophene) (P3HT)-conjugated polymer thin films. In situ neutron reflectivity experiments demonstrated the excess sorption of CO, molecules in the P3HT thin films (about 40 nm in thickness) at low pressure (P = 8.2 MPa) under the isothermal condition of T = 36 degrees C, which is far below the polymer bulk melting point. The results proved that these CO2, molecules accelerated the crystallization process of the polymer on the basis of ex situ grazing incidence X-ray diffraction measurements after drying the films-via rapid depressurization to atmospheric pressure: both the out-of-plane lamellar ordering of the backbone chains and the intraplane pi-pi stacking of the side chains were significantly improved, when compared with those in the control P3HT films subjected to conventional thermal annealing (at T = 170 degrees C). Electrical measurements elucidated that the CO2-annealed P3HT thin films exhibited enhanced charge carrier mobility along with decreased background charge carrier concentration and trap density compared with those in the thermally annealed counterpart. This is attributed to the CO2-induced increase in polymer chain mobility that can drive the detrapping of molecular oxygen and healing of conformational defects in the polymer thin film. Given the universality of the excess sorption of CO2 regardless of the type of polymers, the present findings suggest that CO2 annealing near the critical point can be useful as a robust processing strategy for improving the structural and electrical characteristics of other semiconducting conjugated polymers and related systems such as polymer:fullerene bulk heterojunction films.

In this work, we have used synchrotron-based grazing incidence X-ray scattering to measure the molecular orientation and morphology of nanostructured thin films of blended poly(3-hexylthiophene)/[6,6]-phenyl C61-butyric acid methyl ester blends patterned with nanoimprint lithography. Imprinting the blend films at 150 °C results in significant polymer chain orientational anisotropy, in contrast to patterning the film at only 100 °C. The temperature-dependent evolution of the X-ray scattering data reveals that the imprint-induced polymer reorientation remains at high temperatures even after the patterned topographic features vanish upon melting. Photovoltaic devices fabricated from the blend films imprinted at 150 °C exhibit a ∼21% improvement in power conversion efficiency compared to those imprinted at 100 °C, consistent with a polymer chain configuration better suited to charge carrier collection.

Inverted polymer:fullerene bulk heterojunction solar cells employing a conjugated polyelectrolyte electron transfer layer display light soaking effects as the oxygen adsorbed on indium tin oxide (ITO) during an ambient air device processing induces interface charge trap states in the conjugated polyelectrolyte layer and reduces its interface dipole. The light soaking populates the trap states with photoexcited electrons and reinstates the electric dipole, leading to a recovery of efficient charge extraction and normal illuminated current–voltage characteristics consequently. The identified effect of adsorbed oxygen not only enables a remedy of the light soaking issue of the inverted solar cells via hydrogen plasma treatment of ITO but also suggests the importance of properly handling adsorbed oxygen species on ITO for achieving high performance organic devices based on ITO substrates in general.

Zinc oxide nanowire photoanodes are chemically stabilized by conformal growth of an ultrathin shell of titania through atomic layer deposition, permitting their stable operation for water splitting in a strongly alkaline solution. Because of the passivation of zinc oxide surface charge traps by titania coating, core/shell nanowire arrays supply a photocurrent density of 0.5 mA/cm2 under simulated AM1.5G sunlight at the thermodynamic oxygen evolving potential, demonstrating 25% higher photoelectrochemical water splitting activity compared to as-grown zinc oxide wires. By thermally annealing the zinc oxide wire arrays prior to surface passivation, we further increase the photocurrent density to 0.7 mA/cm2—the highest reported value for doped or undoped zinc oxide photoanodes studied under similar simulated sunlight. Photoexcitations at energies above the zinc oxide band gap are converted with efficiency greater than 80%. Photoluminescence measurements of the best-performing nanowire arrays are consistent wi...

We report chemical modification of self-assembled block copolymer thin films by ultraviolet light that enhances the block-selective affinity of organometallic precursors otherwise lacking preference for either copolymer block. Sequential precursor loading and reaction facilitate formation of zinc oxide, titanium dioxide, and aluminum oxide nanostructures within the polystyrene domains of both lamellar- and cylindrical-phase modified polystyrene-block-poly(methyl methacrylate) thin film templates. Near-edge X-ray absorption fine structure measurements and Fourier transform infrared spectroscopy show that photo-oxidation by ultraviolet light creates Lewis basic groups within polystyrene, resulting in an increased Lewis base-acid interaction with the organometallic precursors. The approach provides a method for generating both aluminum oxide patterns and their corresponding inverses using the same block copolymer template.

In this report, we demonstrate a straightforward two-terminal-device-based electrical measurement and analysis scheme that can simultaneously determine the bulk free charge carrier concentration and out-of-plane charge mobility in organic semiconductors by understanding the transition behavior of device current–voltage characteristics from ohmic to space charge limited conduction. As a model system, we characterize the properties of a semicrystalline poly(3-hexylthiophene) (P3HT) conjugated polymer film in which free carrier concentration is systematically controlled by adjusting oxygen doping level. The observed dependence of out-of-plane charge mobility on the carrier concentration is analyzed in the context of percolative variable range hopping conduction, and we identify the rate-limiting charge hopping process in P3HT and correlate it with the role of disordered polymer regions in mediating the charge transport between neighboring crystalline polymer lamellar domains.

A core phthalocyanine platform allows engineering of the solubility properties the band gap, shifting the maximum absorption toward the red. A simple method for increasing the efficiency of heterojunction solar cells uses a self-organized blend of phthalocyanine chromophores fabricated by solution processing.